14,450 models
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Articulated limbs Multicolor support Added coloring on the nostrils and mouth, giving it a bit of a smile
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
🆕 17.08.2025 A stronger clamp has been added to the Basic set. 🆕 28.02.2025 new parts ⬇ All parts can be rotated by 22.5°. Arm The arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm . Each arm has a connection with a hole on one…
Print approx. €9.42–€11.52 excl. taxPreliminary estimate for one variant
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for one variant
My kids wanted mini Minecraft tools. The easy answer would be to print the fantastic models by GSAMakerspace on Thingiverse (10 years ago!), but ~~I have an XL and I wanted them in color~~ my kids demanded diamond variants. My next…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Smoothly operating and very sturdy sliding barrel bolt lock thanks to the great original design by Jerry Lee With added “locked open” position and full FDM print optimized handle with threads, removing the need for glue. Update: per user…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Print approx. €59.66–€72.91 excl. taxPreliminary estimate for one variant
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
4 handle sizes, perfect for your DIY projects
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
We had mice show up in our house for the first time and my wife wasn't a fan of killing them. I first saw this 140+ year old mousetrap design on YouTube and then a make someone had done as a 3D print on that other site. I came up with my…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Change the plastic after a pause or with the help of a plug-in in the slicer.
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
Let's do multicolour now. Spider-Man 5 colours with MMU2S. Print at least 150mm height. Gcode spidermanps4advancedsuit-mc-basered_icz_02mm_pla_mk3smmu2s_2d7h43m.gcode provided by Ceji3D https://www.instagram.com/ceji3d/ Gcode for 2x…
Print approx. €47.06–€57.52 excl. taxPreliminary estimate for one variant
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Print it on the MMU2S.
Print approx. €18.59–€22.72 excl. taxPreliminary estimate for one variant
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
This is a very simple tool to help you drill a hole square/perpendicular to a surface. It really doesn't get any simpler than this, an angle with a v-groove on 2 sides. No need to press it hard against your drill, just press it to your…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Smart holder adaptér !!!POZOR - pouze pro Colorprint!!! držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: vložit model a…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
Valentines day coming soon! If you forgot a flower buy, you have the last chance to save your problem so you don't have an angry girlfriend / Wife. The red rose is multicolored. — >The rose is 29 cm high and 3 mm thick.< ----- 1. Color is…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
This filament buffer is placed between filament spool holders and Multi Material Upgrade for Original P313 MK3/S. Prevents tangling of returning filaments during color changes in multicolor prints. It can be placed on a table or mounted…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
MultiMaterial Print instructions E1 Blue E2 Black E3 Gold E4 Orange
Print approx. €11.59–€14.16 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a 3mf file created in PrusaSlicer to add multiple colors to the front of the mini Y plate. There is an option of 2 different colors for the text. This was printed on my MMU2s unit. Please make sure to lower the speed of the first…
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for PETGSource material: PET
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Introduction A multi-day pill organizer / pillbox. Provides multiple days with multiple chambers each. The number of chambers per day and the number of days are easily customizable in the provided OpenSCAD files. As are the dimensions of…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Overview These foldable tea bag baskets are perfect for the filament-conscious tea-lover! They print in under two hours, fold really simply, and are designed to be stackable. I made the design in OnShape and there are a few options to…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Re-mixed articulated lizard where each part can be assigned a separate filament color. License kept as original version here: https://www.thingiverse.com/thing:3505006 as per CC BY-NC-SA 3.0
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A holder for a multimeter up to 94x42mm with additional holders for the test leads.
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
The footprint has been made as little as possible to avoid marks in your newly painted objects. Therefor, they are well suited for stacking multiple painted objects on a small working area. Stackable for easy storage Red (Big) :…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
With these designs, I'm assuming the ventilation flow with the valves in place is sufficient and not too restricted. Rev 2 goes way from the single object print and the valve floats a little better in the chamber resulting in a better…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Multimaterial remix of the eagle statue on Thingiverse. (Original: https://www.thingiverse.com/thing:757506 ) This was actually designed as a gift item at Eagle Scout Court of Honors. Print instructions GCODE Extruder Setup: Beak & Feet:…
Print approx. €18.52–€22.63 excl. taxPreliminary estimate for one variant
Sculpted model of a parrot. Available in single color or multicolor print with colorchanges. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Use it to make a pendant, earrings or whatever you want. You can scale it down at 70% without issues. Size : 42mm x 37mm x 2mm Print Settings : Nozzle 0.4mm Layer height 0.15mm
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
Print approx. €5.64–€6.90 excl. taxPreliminary estimate for one variant
This is rework of Counter with Auto-rollover . All wheels are printed in one piece and numbers are created as pockets instead of pads. This makes it easy to be printed flat and in dual colour. Both used libraries Parametric Geneva…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
7 in 1 - Artist Multipurpose Tool Features : Scale 60mm Sharpener Pencil Holder Eraser Holder Fixed Angle Protractor - 60° / 90° / 120° / 135° Golden Ratio Stencil Keychain! Print Parameters : Layer height - 200um / 0.2mm (100mms Linear…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
IFA Multicar logo and emblem in correct size. for one extruder two colors (to 1,8mm white, from 1,8mm black) ironing on Addapted and resized models from Thingiverse: https://www.thingiverse.com/thing:2092314…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
Want to print something unique to decorate your car with? You can use some braided string or a beaded chain to hang these boxing gloves from the rear-view mirror. The creases on the glove pick up nicely in the light, especially with some…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
EN: The plant hanger (spare part no. #700650) for slots in the alluminium construction of the Israeli PALRAM Multiline 6x8 greenhouse. I also prepare 90° rotated version. Printed from PETG with supports. CZ: Háček (číslo dílu #700650) do…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
These files are prepared as a four color print for use on the Prusa XL or other multicolor printer.
Print approx. €15.57–€19.03 excl. taxPreliminary estimate for PETGSource material: PET
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
Print approx. €46.27–€56.55 excl. taxPreliminary estimate for one variant
A must-have tool to help you conveniently pickup the various metal objects in your work space, and then easily drop them where they belong via the quick release handle (can also be used as a “transfer magnet”) . All parts are designed to…
Print approx. €4.31–€5.27 excl. taxPreliminary estimate for one variant
This is a remix from the Rummikub Tiles here on Printables. When printing it should print both colors on the same layer. First the numbers and after a manual color change the second color. Which than should print the rest of the tile.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This model replaces the original mudguard with the integrated chainguard. Just removing the OEM one doesn't do the trick, as oil/grease/dirt from the chain will be yeeted everywhere. With this chainguard the back not only looks cleaner,…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
I decided to design this WWII First Aid Kit , originally used during World War II and manufactured for U.S. Army Jeeps . The model has been created after extensive research, using all the historical information I was able to find. It is a…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
If you've looked for a painter's pyramid before, you're probably aware of the variety of designs out there. I faced the same situation and, while many models had great features, none quite ticked all the boxes for me. That led me to…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for one variant
This highly realistic modular wall with columns is designed specifically for H0 scale (1:87) model railways and dioramas . The model is fully modular , allowing you to easily create straight or extended wall sections. It features separate…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Hello This is my second iteration of Multifunctional hand watch bracelet. After many hours of testing and tinkering I made it smaller but more capacious. This time the containers are attachable as well as other attachments like…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for PETGSource material: PET
Prints well large or small -- if you have dry filament you can go with a larger nozzle, as there isn't too much textural detail. Latest version adds seam painting and fuzzy skin where they're supposed to be fuzzy. When large, textured…
Print approx. €53.81–€65.77 excl. taxPreliminary estimate for one variant
Multiboard flask holders in the following sizes: 25, 27.5, 30, 32.5, 35, 37.5, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110, 115 and 120mm. The flask holders uses the flexible MultiConnect connector. Just attach…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. My multimeter is about 70mm wide and 26mm thick.
Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant
As we would like to go to camping and sleep in our T7 Multivan (2023), we just needed something for the ventilation… Some kind of window adapter… So this is the result of our idea and my first own design This ventilation grille is…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
Ergonomic, printable scoop designed to measure and serve dry pet food. The shape is optimized to collect and pour kibble comfortably and cleanly. Updates 2026-05-04: New sizes, 300 cm³ and 320 cm³. 2025-07-21: New size, 280 cm³.…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET
A cute English cocker spaniel puppy available as a multicolor print! Use supports when printing. Have fun printing and remember to post your makes!
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
Dovetail Gridfinity Base - Multiple Dovetail Options
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Multi color coaster with Tesla logos. Can be printed in multi-color with PrusaSlicer. I've attached the 3MF file as well as STLs. There's also GCODE available to print it on Prusa Mini with PLA filament.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Look at the pictures to see how to assemble it. Updated 2024-01-23: Made the rim/spring stronger. OK now, but still holds not perfect together. Consider to glue it ;) Chamfer instead of a fillet (suggested from @LibertyBeta_67371 )…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Let's test and discuss first layer on our new Prusa Core One. This model is designed for the CORE One to help test and calibrate your first layer adhesion at different layer heights. It includes four sections, each corresponding to a…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Use 3 perimeters to increase stiffness. The bolt may break when tightened. You can print flat, but need to adjust tolerances. Different lengths. Can be combined with different screws.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
What is included here are the files that you need to print to get the dual lock, which is the Idler Body, the Pulley Body, and the right Lock. You need an extra M3x35 screw with a spring and an M3 square nut, that you should have gotten…
Print approx. €15.94–€19.49 excl. taxPreliminary estimate for PETGSource material: PET
About The price of original retract (1-01759) seemed rather high for a pack of screws and plate of milled plastic, so I decided to design my own based on photos available on the internet. I had to alter some dimensions (mostly main body…
Print approx. €11.68–€14.27 excl. taxPreliminary estimate for one variant
Even during intercene fighting, people still must get about the megalopolis hellscapes. Work accomplished helps the war effort. So travel in style on the Dual Multilevel Ground Transport. It will take you where you need to go. Whether you…
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
Another Audioengine A2+ Speaker Stand. This one features options for multiple angles for optimal listening experience. Print on the side for a nicer surface. Includes insets on the bottom for anti-slip rubber feet with a diameter of 10mm.
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
Multi-device charging station is a custom-made product that features a 6-port USB charger hub purchased from Amazon. It includes a wireless phone charger and 3 standing slots to hold other devices. This product is designed to provide a…
Print approx. €10.52–€12.86 excl. taxPreliminary estimate for PETGSource material: PET
This AirTag holder Design requires a few parts for assembly that I will list below. Best printed at 0.1mm layer height as its quite small and requires a nice curve around the AirTag. PETG or ASA is best if you are going to use it…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of @Bubbleology's amazing JWST Carina Nebula lithophane, modified to print flat and in multiple colors for printers with Bambu Labs AMS or the MMU Printed at 100% infill, layer height of 0.12, and at standard speed on my…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Wall mount for multi-tool (or ocillating) tool blades holder. Should be pretty universal.
Print approx. €15.60–€19.06 excl. taxPreliminary estimate for one variant
Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
The Spaghetti Detective is an AI-based octoprint plugin for 3D printing failure detection. Whether you're worried about print failures, fire hazards, or network security, The Spaghetti Detective has got your back. The Spaghetti Detective…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
