bananasong (banana butterfly knife)
this butterfly knife that looks like a banana only requires 3 separate prints that clip together with ease.
- Downloads
- 1,139
- Likes
- 95
- Rating
- 4.33
323 models
this butterfly knife that looks like a banana only requires 3 separate prints that clip together with ease.
Completely built from scratch based on the original parts, as I had found the ones available don't quite perfectly fitted on my Q. I included the Tray as seperate parts, as well as a full version - you obviously only need one.…
This is for the Panasonic Lumix camera batteries DMW-BLK22 that are used on the S5 / S5 II / S5 IIx / GH6 cameras. It is possibly compatible with the DMW-BLF19 battery used on the GH5(S) and G9 (and others) but I am not able to verify…
Just a simple DIN mount for the Panasonic SSR. Uses 2 M3x4mm heat sets for the mounting, and snaps nicely onto a DIN rail. May fit other SSR modules, I'm not sure. I designed this for my Micron+ build, and it works well for me.
You can effortlessly scan dinosaurs with the MIRACO 3D Scanner, capturing rich details. Use the Near Mode for scanning.
The sword that comes with Transformers Legacy Motormaster is painfully small for Menasor, so here's a version with a bigger blade. One version is the entire sword, the second version splits the hilt & blade so you can print in different…
Panasonic Lumix DC-GH5 Camera Cage Disclaimer: This was a one-of project. I printed all parts and assembled the cage including the camera. This resulted in a working prototype. However, there still might be some issues with the design.…
I'm a fan of Panasonic Lamdash shaver for a long time. Only one downside is that it rarely come with a simple stand, though they offers a cleaning or charging stand. This is a simple stand for Panasonic Lamdash shaver. My shaver is…
Replica Panasonic BT-S702N CRT Monitor for Jurassic Park Explorer builds. Includes an LCD variant for small flat panel displays as an alternative. It includes Faux buttons to the real thing, (Non-Operable) Hardware Required: 2x 3mmx12mm…
Remix of Anachronism great HotShoe Cover. Added new OM Systems and Lumix logos to both for my cameras that needed hot shoes. These were printed in resin on an SLS printer. Fine details will required .25mm nozzle or SLS to get the results…
Stop losing your remote, give it a home! Sleek looking mount for the wall for your Panasonic tv remote. Fits most Panasonic tv remotes, and others in a similar shape. Panasonic remotes are ~50mm x ~25mm. I printed mine in PETG, but it…
Replacement knob for our Panasonic AW RP-150 PTZ controller. It will probably be the same for the AW-RP60 also.
The tiny dang thing went flying basically the second I opened the box, so I took out the calipers and made a new one. OpenSCAD File included if you want to change how it fits if you need it for a different device. It's small enough that…
Drive piece for Panasonic K-mechanism VCR. This is the little drive component that couples a motor to a worm gear in the mechanism, Motor Pulley VDP-1434 or Loading Motor Coupling. The coupler tends to crack and stop transferring power,…
I was having difficulty finding a replacement lens hood so I put one together in Design Spark. This hood will work with the Panasonic Lumix Leica 15mm 1.7 or the DJI white-labelled version. Printed solid at 0.2mm layer height, 0.4 nozzle…
I like the original design by hopskipper but I only needed a case for 3 batteries . So I remixed it in Tinkercad and here it is. Print Settings Printer: Anycubic i3 Mega Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Notes: Print…
I've seen loads of battery adapters for other brand power-tools but hadn't seen Panasonic adapters. So I've created this little piece of plastic myself. Now I can use my Panasonic battery packs (14.4V system) for other applications as…
A printable door release lever for Panasonic microwaves matching PN 5Y00AP / F82565Y00AP. Slightly modified with more internal vertical supports to make the part a bit stronger and print friendly. Print with the 45 degree surface aligned…
Battery cover replacement for a Panasonic N2QAYB 000593 N2QAYB000593 remote control. Notes: For mechanical robustness, print it lying on one side, possibly tilted by about 2 degree to lie flat, as following:
My very first project based on an idea my father had regarding a print that was met with a realization that no one had already made one for everyone, took it upon myself to recreate one of the most famous simbols of Rome. Parts include…
Battery case for Panasonic DMW-BLK22 (Panasonic S5II) battery. 100% infil 4 perimeters support for latch, XY - 120% snug
A battery case for storing a pair of batteries. Three options to suit: BLX-1 for the Olympus OM-1 and OM-1 II BLH-1 for the Olympus E-M1 mk2 and mk3 DMW-BLK22 or DMW-BLF19 for the Panasonic G9 or G9 mk2. Uses a pair of 10x3mm magnet to…
People always complain about these breaking so i quick scanned it and cleaned it up for when I need it. Print instructions i haven't printed it yet so let me know what you come up with!
As this is a tiny model, you'll want to use a resin printer (or order through a service like PCBway/JLCpcb) for accuracy. you need 8 small 3x1mm magnets (neodymium N52). Make sure all magnets are oriented the proper way. You can press-fit…
A replacement AV Expansion door for the Panasonic FZ-10 3DO. This is a direct replacement for the OEM door and fits exactly like the original. Unlike the original door, this replacement has an added finger cutout allowing for much easier…
For the heat inserts, I used some small (4mm tall) M2 ones. Both versions need M2x5mm (max height) screws to mount the picoboot in place.
Panasonic LUMIX G VARIO 7-14mm/F4.0 ASPH Filter Adapter Ring Self-designed, 95mm filters have slight vignetting at the 7mm end (currently the most comprehensive choice) 105mm filters can avoid vignetting, but are larger in size and more…
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
Holder for Panasonic drill battery. Panasonic EY9L45 Battery wall mount with "click on" function. Should work with all batteries (10.8V to 28.8V.) working with Panasonic EY0L82 Charger. I have tested with 14.4V battery. Print at 0.2mm, no…
The knob model is very similar to the original and fits perfectly onto its shaft. I also made the knurls to rotate it better. You can print even without using supports
holder for the Panasonic charger
These are replacement gears for the Panasonic Q disc drive. I highly suggest a resin print for these parts. If the holes are too tight of a fit, gently bore them with a drill bit BY HAND.
Diseño del Profesor Tornasol a 4 colores hecho con AMS. Impreso “boca abajo” con lámina PEI texturizada. ------------------ Otros diseños: Tintín y Milú: https://www.printables.com/es/model/647590-tintin-y-milu Capitán Haddock:…
If you want to modify this yourself, I have the *.scad file on my github repo: https://github.com/andorbal/gridfinity
Just a simple wall holder for the Panasonic multi-type remote, I attach mine to the wall with a command strip. Infill ~15%, whatever material. I did as low as .1 and as high as .3mm resolution, it's all the same. Print Settings Rafts:…
Lithium-ion Safety Concerns: If you do not know what your are doing or you do not have any experience about these batteries, do not play with them. They can store lot of energy, which can hurt you seriously and you can burn down your…
This is a simple Honeycomb Storage Wall mount for the Panasonic BQ-CC65 battery charger. To mount it, you'll need two M3 screws and either two original inserts with M3 nut or my variant of the inserts that use square nuts…
a gridfinity holder (2x4) for a Panasonic BQ-CC55 charger (eneloop) and 10 AA and 10 AAA batteries
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
Just got my S9 and love working with it! Facing the only issue to me here (coming from a Canon DSLR), that with medium/large lenses the ergonomic becomes a bit tiring and un-save to hold with one hand. This grip enables you to operate the…
printed flat, the holes of teh first layer are printed to improve part flatness you can punch true the holes easily
for a N2QAYB001178 remote but proberbly fits other panasonic remotes
Battery cases for Panasonic Lumix DMW-BLG10E and DMW-BCM13E.
3D MODEL DESCRIPTION design this to mount any sport cam with a 1/4 screw on the hotshoe of my panasonic Camera (work with GH4 and G80 If you try tell me I would be pleased), work well with insta360 X3 (and other). should work with other…
Since I live in a NYC apartment with minimal space and would like my deposit back if I move, I have mount things on the wall using command strips. I have been using this mounting for my beloved Panasonic ARC6 for a few weeks now and I…
This is a holder for a Panasonic air conditioner remote. I have no idea what the remote type designation is, but if your remote looks like the one in the pictures, it should fit nicely. It will probably not fit any other type of remote,…
This is a very simple wallmount I designed to put the YKR-H/101E remote controller on the wall.it has small overhangs but they are easily managed by most printers. Printed with Overture White PETG on a Creality Ender 3 Pro.
This is a lens hood for the Panasonic 42.5mm f.17 micro four thirds lens. The mount snaps in place like the real lens hood. It is a little tricky to take off the first time (just like the real ones) but loosens up pretty quickly. It isn't…
Figure size: 25,22 x 25,33 x 44 mm Use your own stand or a pre-made stand in my models Supports are necessary Illustrative pictures & gifs Possible re-make for your own, non-commercial purposes My private AI model without textures is…
I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…
Replacement lens cap for the LX5 camera with a compliant mechanism.
Battery box for 3 spare batteries for Panasonic Lumix DMC-LX100. There are two sets of STL uploaded. One is with corner tabs to prevent lifting of the first layer from bed. The other is clear of those tabs. Just use those that suit you…
Replacement knob for our Panasonic AW RP-150 PTZ controller. It will probably be the same for the AW-RP60 also.
Install a 2.5" x 5" oval fan outlet like the one on the Panasonic WhisperValue to a 3" duct
Here's a model for a shroud that screws on to your Panasonic Lumix S5IIX and allows you to keep a Samsung T7 Shield connected - with all connectors and the side door protected by the model. Screws into the ¼"-20 connector on the camera…
This particular print was printed for outdoor longevity using PA6-CF 3 Walls 10% Gyroid infill No Supports.
This is an enclosure for the HeishaMon communication PCB from TheHogNL, used to control or monitor your Panasonic Heatpump. I really liked the original design and the feature of pressable buttons was really nicely implemented, but it…
Replacement corner bumpers for the cf-29. Print in tpu
Update (03 Jan 2019): Version 2 added. More ergonomic, more beautiful, more balanced! After buying my Panasonic KX-TG6811 DECT phone it turned out that its handset cannot stand on flat surfaces on its own like my old Panasonic phone did.…
This Panasonic Lumix GF3 Handgrip Version 2 is a remix of my previous design, a Panasonic Lumix GF3 Handgrip: https://www.thingiverse.com/thing:3457599 This design remixes and uses the larger grip found on this great design, a Pentax LX…
Button designed to replace a broken door button for a Panasonic microwave. 2018-10-25 Update: Added some curves to strengthen the design. Category: Kitchen & Dining
I designed this camera cage for my Panasonic HCV-757 and 777 camcorders, as there are no models of cages available with this formfactor. To design the cage I remodeled the camcorder and built the cage as tightly as possible around it.…
Introduction This is a simple design to fit over the top of the existing eject button on a Panasonic JU-256 floppy drive to enable it to work as an internal drive on an Amiga 1200 case. This is part of a larger project:…
Seamless geared follow focus ring for Panasonic MFT 14-42mm F/3.5-5.6 lens. The focus ring was made to work with DJI Ronin SC pro combo follow focus motor. The fit is a bit too tight so the ring needs to be sanded down to fit on the lens.
Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens This lens hood fits Panasonic / Olympus 4/3rds lenses with bayonet hood mount. To put the lens hood on, squeeze the hood opposite the ears. The lens hood stays in place because of…
Support to relieve strain from the Panasonic Q digital out when using a Insurrection Carby adapter for HDMI output, place Carby into hole and line up as in the picture so that it clears the screws behind the support Edit 1/5/2023: Added 2…
Designed to mount the Panasonic BQ-CC17SBA Eneloop Advanced Individual Battery Charger…
A replacement front, back and side grip for an Panasonic G9, solving the pesky problem of the original rubber grip expanding and coming loose. I recommend printing in Nylon/CF and using 3M 468 adhesive. I designed this by using a laser…
holder for your Panasonic BQ-CC51 battery charger. small, simple - enjoy
Remix of Anachronism and Steves great HotShoe Cover, its a bit flatter to fit plane on the camera also ive added a small grip. I've printed it in glow in the dark pla (looks rly nice) with 0,15 layerheigt and 100% infill.
Faceplate and lever for Panasonic JU-475-5 5.25 inch floppy disk drive.
This is USB charger for a Panasonic Screw Driver EY503 (or similar) battery, when it is converted from Ni-CD or Ni-MH 2.4V to lithium-ion 3.7V. Do not use to charge original 2.4V battery! Here is how to convert a battery for this tool. I…
My GX80 (and probably more Lumix cameras that use BLG10E battery) have one crappy lack/disadvantage. They cannot be powered from USB, but only charged... I'm designing a big battery grip, so I needed some input "dummy battery". Wouldn't…
Only compatible with the Kaico GC Video adapter at the moment. I'll make it compatible with other adapters if you can provide me with the correct measurements.
Two simple cases for the Panasonic Lumix Battery Pack (DMW-BLG-10E). V1 is a simple rectangular slide in/slide out style cover that relies on friction to keep the battery secure. V2 has an integrated clip that will hold the battery in but…
This is the GBP Player shell for the Panasonic Q but you can use the original GBP player internals for the Q. I took inspiration from the original design from 0Cordo but couldn't work with the files in Sketchup Free Web so I started from…
Printed in PETG. No supports, brim and raft at own discretion. 100% infil, took an hour to print. attaches to the camera in orientation with short side up and then rotates clockwise (when looking at lens) to lock in place.
Xfinity Battery to Panasonic Skin (emulating EY9231 battery) Here is an adaptor to use an Aldi Xfinity battery to emulate a Panasonic EY9231 battery ** note you will be overvolting your tool ** Extra requirements 2 x 6mm male spade…
If the cover is a bit hard to take off the battery you may want to smooth the retaining nib by flame smoothing the surface of it. This can be done with a lighter flame or a soldering iron. Also sanding it smooth should work. All it takes…
A replacement belt clip for the Panasonic auto reverse stereo cassette player, model no: RQ-J8
Panasonic floppy drive belt, perfect for EME213, which use MSX computers, just like an original one, but at a better price.
The original GH4 eyecup is a two piece design using a hard plastic base that clips onto the viewfinder and a softer rubber cushion. The plastic clip wasn't very sturdy; I lost mine when it slipped off the camera and I didn't notice until…
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design: As thin as possible to help in acheiving prime focus. Locking pin hole included to prevent unintentional release (and to prevent…
If you like this, please give it a like and a comment. Thank you so much! -Built in quick release Arca Swiss Vertical and Horizontal L-Bracket. -Modular hand grip. Use mine or Customize your own. -Has a spot for magnetized Allen wrench!…
Replica power and eject buttons for the Panasonic 3DO FZ-1.
Fits microwave model NN-SN661S and possibly others. Panasonic part # F82569Y00AP Printed just fine without supports on my printer, but your mileage may vary (see orientation in photo). (Probably would have “looked” nicer in a different…
Intended for resin printing due to the small parts (and weird shape - wouldn't even know how to best support this as FDM model honestly). I have added 2 variants; The regular one which you can paint with a window masked off, to closely…
The PSU connector for the Panasonic FS-A1 and Sony HB-F1 computers has a strange mini-iec connector (as does the NEO GEO CD). This is a replacement for it, you'll need to put come metal tubes inside the holes and connect it to a suitable…
This is a replacement for the flimsy lens cap that came with the camera and that keeps falling off. This lens cap clamps onto the outer rim of the lens. It has room for the lens to extend if you accidentally switch on the camera with the…
I made this strap mounted spare battery holder for my G85. It allows me to hold a spare battery on my strap when I am walking around. The battery has a snug fit, and is held in place with a small latch. The battery can be quickly removed…
I have more of these CF-19 CF-18 laptops from Panasonic and this cover breaks easily. Quite expensive to buy even as used part. The model I designed follows the display contours well.
V5 is raised to allow mounting with flanged screws. Countersunk screws for V3.
Hotshoe cover for a Panasonic camera with auxiliary port. Built it for my GX1, but should work on many others. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: .3 Infill: NA Filament: Generic PLA+…
Details- https://www.reddit.com/r/cassetteculture/comments/1pyukrt/self_repair_project_writeup_and_how_i_repaired_my/
This is a cheese grate camera cage for the Panasonic GH4. https://www.thingiverse.com/thing:1691475 was the inspiration for this cage, but this was measured and modeled from my camera from scratch. This cage has a proper hotshoe catch to…
EN: This is a minimalist, custom-fit wall mount for the Panasonic ES-LV67 shaver. The mount is available in an adhesive or screw-on version. The shaver slides into the holder from above and is held securely in place. To achieve this, I…
Panasonic Outlet Plate Category: Replacement Parts
designed specifically to hold the Panasonic BQ-CC17 battery charger