355 models
Useful combination of a box and templates for your notes. The templates come in three versions: To-Do list, with a tick off field lines, for longer sentences blank, for you to add your logo The box keeps your desk clean and organized.…
3 different size holders Wall are 2mm thick (no infill) large 45mm tall (4 sticky notes) medium 22.5mm tall (2 sticky notes) small 11.25mm tall (1 sticky note)
Mini Clothes Rack mainly for fun! Wheels are not functional, you can use like decoration, stand for mini clothes (from light fabric) or for office sticky notes papers. No need to glue. Scale 1:6, without supports, material PLA, layer…
This Skadis rail can hold photos, notes or the favourite drawings from your kids. Simply slide the paper into the rail and the bar inside will grab onto it. To remove it pull firmly on the paper and it will slip out of the rail. There are…
Organizér pro lepící bločky o velikosti 75x75mm i se vzorkovníkem. Celková velikost = 93x93x32,5mm Síla stěn i dna = 3mm Moje tiskové nastavení: PETG, výška vrstvy 0.2, výplň 40%, 4 perimetry, bez podpěr
Printed sideways soo no need for supports. 17cm tall 15cm wide Overall a very simple print.
Intro A minimalist holder for 3"x3" pop-up Post-it® notes on any surface, always visible, always within reach. Mount it with a double-sided tape on a fridge, whiteboard, or wherever you need it. Details I use sticky notes and a marker on…
Organise your tasks, notes or ideas like an air traffic controller. The different colours of the FLight strips allow you to keep track of priorities or project assignments or use the colourful accents to liven up your desk. Adapted to A4…
Intro Introducing Notes Board for the C.lamp system. What is C.lamp ? It is the clamp for your lamp! (or any other vertical 1 inch tube or pipe with a rough surface). C.lamp is ideal for IKEA HEKTAR lamps, as they take up a lot of…
This magnet is for easy remove (for example from fridge) notes you have under. Just click and papers are free :) Print lying on side, pause printing at 10 mm height and insert both magnets, than continue printing to print magnets in. 2x…
I made this letters for my notebook just because I had fun designing it. I just glued it on with superglue. Features: prints with no supports
UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…
This model was designed to be a replica of the Minecraft Enchanted Book. It is made to hold the standard field notes as well as pens and markers. I've chosen not to create a universal design, but have provided 3 different options in the…
I noticed that sticky note boxes usually lack a lid design. To enhance portability, I designed an integrated lid that not only provides a new option but also makes carrying and storing sticky notes more convenient, while also…
Made these for decorating a gift (concert tickets). Just traced them out from some pics.
Holder for 76x76mm notes/sticky notes for Ikea Skadis
I designed this collection of musical notes keychains / key tags using SVG files from https://www.svged.com/. At 100% scale, all keychains measure 2.0mm high. The keychain hole's outside diameter is 8mm and inside diameter is 4mm. The…
Material: PLA Printing speed 100mm/s Support No Plate adhesion No 15% filling
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
A honeycomb style Pencil Holder & memo storage box, designed in Fusion360. Honeycomb Pencil holder Print time:5 - 7 hours at 100% scale (depending on settings) Dimensions: 7 x 9 cm (diameter x height) Weight: 42 grams Honeycomb Memo…
I designed this collection of musical notes fridge magnets using SVG files from https://www.svged.com/. At 100% scale, all the fridge magnets are 5.0mm high, with 6.2mm x 3.2mm holes for embedding 6x3mm neodymium magnets during printing.…
Was the model/idea/guide helpful? Support us on Printables . Sharing or selling our digital files is not permitted. These remain our intellectual property. To obtain permission to sell physical prints of any of our designs, please…
SUPERCEDED BY If you own an AD5X you will have encountered the front of the extruder deciding to break free and drop onto the build plate, best case a ruined print, worst case a ruined fan component. I created this to clip into the side…
Notes template To Do The Size: 180 x 110 x 3mm
Tray for card wallets like the ridge wallet, holds keys, cash, notes, coins, SD cards Has tapered sides to prevent cards from catching on the bottom lip when they are being inserted next to the tray - this is the main reason I created…
This clean, modern desk organizer was fully designed in Fusion 360, inspired by a concept generated with AI. It offers a space-efficient layout with multiple levels and compartments for organizing pens, business cards, sticky notes, or…
music notes - wall art, easy to print
For this to work you have to download the casing from my Business card Embosser (LINK!) For all music makers, music lovers, musicians… Music Note Rollers for the Business card embosser! (Only rollers, no casing) More rollers will be added…
I purchased these Field Notes Brand memo books and love them but I didn\'t like the way the books didn\'t stay closed and pens clipped onto the books awkwardly. So I quickly designed up this clip that not only keeps the book closed but…
Thing files for Desk Organizer with Phone Holder and Sticky Notes #studentdesignchallenge by Quality_Onion - Thingiverse
With this set a non sighted user can tactilly explore musical notes and their meaning. the set includes musical notes, keys, rests and a bar filled with musical notes.
Template for notes to be used in an A5 Notebook with 6 ring binder. Rings are: O 19mm O 19mm O 70mm O 19mm O 19mm O This can be used to create a full “ToDo” list, but you may also use it to just create some of the points. Even just for…
Desk organizer, 7 versions. Version shown in photos has date wheel holder in back with cutouts in bottom to save a little material. One version omits cutouts and one version omits date wheel holder. Added versions to accommodate a 6x9…
Holder for 90x90mm notes/sticky notes for Ikea Skadis
This is simple desktop card notes box up to 80x80x50mm inside. Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders. You can easy print it without…
If you like what I'm doing, consider buying me a coffee. Much thanks! Buy Me a Coffee :)
A stick notes organizer that fits on the honeycomb storage wall Has a small spacer behind so its easier to grab and deposit the packet
This is a 2x4 Gridfinity bin designed to hold 140mm tall Field Notes notebooks. A single bin can hold 12-16 notebooks depending on how tightly you want to pack them. Once filled with Field Notes notebooks, the overall height is roughly…
Simple desk organizer with a drawer and removable container for post-it sized (76x76mm) notes. Made by my friend who doesn't have an account or printer (yet) but wanted to compete. The base requires a bit of support where the drawer…
Print settings: You can cut the drawer section in Slicer Software if not needed Printed with Supports for Drawer area PLA or PETG
All work and no play makes Joseph a Maker Boy All work and no play makes Joseph a Maker Boy All work and no play makes Joseph a Maker Boy All work and no play makes Joseph a Maker Boy Easy to Print Check out this typewriter inspired by…
A little pallet jack that is designed to fit into the pallet of sticky notes made by Uline.
A nice stackable desktop sticky notes dispenser case. It fits a block of 76mm × 76mm (3in × 3in) sticky notes, such as 3M Post-it notes . The case fits into Zack Freedman's Gridfinity system using a custom design inspired by @grizzie17's…
While there are already existing models for clips for Field Notes, I found them all a little bit too loose, and I wanted a simple clip for my pen as well. I recommend printing the models with a brim, since they are rather thin and could…
This is simple desktop sticky note organizer (80x80x50mm inside). Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders and a place for the USB caps (or…
Update 02.04.22 Somehow i mixed up some models so the wallet would not work properly. Now the correct files are online with an improved lever and the right top version. This is a Remix of Gurin's and GleZz's Design so you can fit 2€, 1€…
Here is a small desk organiser that I have made it can hold a stack of stick notes, a few pens/pencils and 6 usb drives
Put together a Dayton C Note speaker kit and print the cabinets to avoid clamping, sanding, staining, painting, and other annoying woodworking tasks! The cabinet is designed to fit exactly inside the MK3 print volume, which results in a…
Super simple storage box for Field notes (or similar sized books), 89 x 140 mm (3.5×5.5").
Post It Notes holder with paper clips storage
Trying to make my notes look a bit better, I came across some stencil for D&D characters but the slots were too big for my pen and so I came up with a set of various stencils myself.
Introducing a custom-designed frame for your 90x90 notepad cube! This 3D printable frame is perfect for organizing and displaying your notepad cubes in a neat and efficient manner. Features: Specifically crafted for 90x90 notepad cubes.…
Dieser stilvolle Halter organisiert deine DIN A7 Karteikarten oder Notizzettel effizient und platzsparend. Ideal für den Schreibtisch. Einfach zu drucken und robust im Design, wird er zu einem unverzichtbaren Organisationshelfer in deinem…
This key chain is made for holding a small size sticky notes pad and a shortened pencil. So you get both always at hand. Prototype was printed using 0.3mm layers with support enabled.
Modular Card Notes System I was inspired by the very interesting DRY ERASE SYSTEM model from Kazik and I decided to make a modification with some improvements (for example you don't need any screw for assembly). What is it? System for…
Keep your workspace neat and stylish with this modern hex-pattern desk organizer. It features three compartments, perfectly sized for sticky notes or small accessories. The open honeycomb design gives it a clean, lightweight look while…
Organizer can hold 1 Kč, 2 Kč, 5 Kč, 10 Kč, 20 Kč and 50 Kč coins. And banknotes. This is my solution to common problem where I do not use wallet and as a result money are everywhere! Printed on default settings for generic PLA and 0.6…
Just tape money notes inline and put inside the box. Use glue if lid will be too loose. Wide hole for different currencies. I borrowed reference photo.
The project was created while learning Fusion 360.
A printable guitar fretboard with notes on the frets! A good utility if you want to figure out the notes / chords of songs you're playing while having an actual neck to hold while you do so! I found it a bit annoying trying to look at…
Great for holding up small, thin items for display! Print in single color or multicolor with color swaps. Don't forget to share your makes – I love seeing what colors you choose! --- Print settings: - 0.4mm nozzle - 0.2mm layer height…
Print Settings 10% infill 2 perimeters 5 top layers, 4 bottom layers No supports
Door/Wall Clip for Notes (Paper Holder) A simple but very practical wall clip for holding single sheets of paper, notes, reminders, or posters on a wall or door. Just push the paper into the clip – no pins, no tape, no damage to the…
Parametric index card for small notebooks like Moleskine, Field Notes or Rite in the Rain The design was created in OpenSCAD and can be easily adapted to any notebook or its dimensions. The only limitation is the size of the printbed of…
ToDo list (checklist) stencil for 9x9cm paper note block. You can choose square or circle checkboxes. There are two versions with 8 and 10 items.
I wanted a musical-themed cake topper for a birthday cake. After a lot of searching, I couldn't find one with a bass clef, so designed my own. Best printed on a large(ish) format print bed. Prusa i3 is enough.
Who hasn't needed a little help at school now and then, even though only a calculator and a pen are allowed on the desk? This case for the Casio fx-911 DE X features a small, retractable compartment for discreet notes. Simply remove the…
Office organizer box with a place to store pencils and sticky notes. Dimensions: Notes compartment (WxLxH): 80x80x70 mm Pencil compartment (WxLxH): 80x40x70 mm Settings: Supports: No Resolution: 0.2mm Infill: 15% PLA, PETG Filament brand:…
Took the excellent Music Notes design by Noreva and split it into 3 files.
Remixed the width by 104% and removed the Honeycomb mounting, the back is now smooth. I'll probably use command strips to mount to the wall.
Notes template To Do: THE SIZE: (76 x 76 mm)
An easy-to-print, detailed model for creating musical decor, jewelry, and gifts.
We designed this simple and cute sticky note tower to organize our desks and keep our notes and our USBs in front of us in a cool way, also. this design is made of three parts you can print them separately and glue them together. it takes…
These can by used by beginners learning piano to help learn the names of the notes and to compose short songs. The notes are not marked because they can be used on the treble or bass staff. You can write the various notes on the back with…
These are a stack-able holding boxes, e.g. using 2 or more different types of receipts/notes.
Compact and functional organizer for your notes, notes templates, pens and other small stuff. No supports. 110x110x45mm
This is a very straightforward and lightweight paperclip for Skadis pegboards. It's meant to hold paper and cardstock securely without being obtrusive or overengineered. Great for hanging art prints, postcards, and other notes!…
Post-IT holder 59x59x55 , for 2x2 Post-It
Simple and thin box for Ikea Skadis system This model is using Skadis T-Clip System ( https://www.printables.com/model/256896-skadis-t-clip-system ), see link for details. I wanted to have it bulletin board mountable, but also…
Desk tidy designed to take up most room on an Ender 3 sized bed. Made it thin walled to use less filament for maximum space. Compartment for the larger Post It, sticky notes. Slopped section for coins or bits and bobs (screws/bolts etc)…
Dispense your sticky notes efficiently! A simple sticky note dispenser for your home, office or student Honeycomb Storage Wall system - everywhere you need a lot of notes…for example when you are preparing for big and importent exam or…
Very handy keychain that can store your pills and few banknotes, so that you will have them around every time you need them. There are two threaded ends, each opening different chamber. Feel free to customize the dimensions to fit your…
It is a sticky notes holder with three slots for notes and it also have stencils which are used for making lists outline like to do list and all
Field Notes are great for capturing… well notes, but sometimes it'd be nice if you had something hard to write against. This little clip board has a spot for your pen and a loop for rope or a lanyard if you so choose. It fits most pens,…
Two HSW boxes for storing sticky notes (Standard size and small). Standard size is 78 x 78 mm. Small size is 51.5 wide x 39 mm. Both are 30 mm in height. I had to increase the model size by 0.1% when printing for the hex tab to fit my…
Nice and fast print that doesn't need support.
Beschreibung Introducing a custom-designed frame for your 90x90 notepad cube! This 3D printable frame is perfect for organizing and displaying your notepad cubes in a neat and efficient manner. Features: Specifically crafted for 90x90…
A box for 9cm x 9cm paper notes. Big or small box.
This is a simple clip for the Field Notes Memo Book combined with a Pigma MICRON Pens. The clip is made for the 48 page Field Notes Memo Book. The memo books and pens can be found at your local art supply store, or via Amazon: SAKURA…
Simple paper display unit suiteable for paper and card. Back support to stop thin paper folding backwards. You may need to use x2 and place at either side of your sheet to support very thin paper from folding in wind. No supports…
This is the set of notes that can be used as door stopper Settings: 0.2 quality or better 100% infill PLA - PETG -ABS are good Njoy
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Musical Notes - Stencil template . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or…
Template to do list workdays I have updated and designed this design to suit your needs during workdays in one piece of paper so that you do not forget what you are doing. The Size Template list to do : 120 x 190 x 2mm I hope you like the…
!["Euro-coins" car-cup holder/organiser [V2] ¢10, ¢20, ¢50, €1, €2 incl. hidden drawer for banknotes!](https://media.printables.com/media/prints/712081/images/5581940_e7e95e0b-e9b4-42f6-aa0c-2434b9220eef_0d555041-e86d-459a-940e-0abef3727e42/coins-organiser-v2.png)
