142 models
Many 3D-printed nutcrackers are bulky, rectangular, or visually utilitarian, often consuming far more filament than necessary. I wanted a compact design that looks good even when left out in a bowl of walnuts in the living room, without…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
Timeless model of a nutcracker which is highly optimized to crack walnuts and hazelnuts. Especially hazelnuts are hard to crack - the special geometry places the nut slighty off-center below the piston which makes a perfect crack. Print…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Meet the Mini Nutcracker — a tiny version of the classic Christmas icon! 🎄 Height: 28 mm Perfect for festive table settings, mini displays, or dollhouse decorations A charming little soldier ready to bring a touch of Christmas tradition…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Casse noix a vis aucune noix ne lui résiste, simple et rapide. Screw nut cracker no nut resists it, simple and quick. Impression en PETG a 40% en 020.
Print approx. €2.36–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
EN: Nutcracker for wal- and other nuts. Material : (HT)PLA, PETG Layers : 0.3mm, 0.2mm if you have more time or a faster printer :-) Supports : no Perimeter : 3 should be enough Infill : 30%…
Print approx. €6.53–€7.98 excl. taxPreliminary estimate for one variant
Modelo creado para una empresa de fotografía como detalle al entregar las sesiones navideñas junto con una placa con logo, Perfecto para decorar el árbol de navidad. Impreso en MK4S con MMU3 utilizando una boquilla 0,4 ( con 0,25 queda…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for one variant
Body can be prinled lying flat for more strength. Parts needed: 3mm wood screw (optional)
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
A Nutcracker, when I used it on a nut, it was able to crack it, but you have to push it a few times forward and backward.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
11cm x 4cm 1.5mm stamp depth solid model to print
The original design files were kindly shared by the designer / creator. This allowed me to redesign the model for printing on a much larger scale. The final design is 1.815m tall. I designed the parts to minimised weight and get around…
20Dec22: Corrected NutcrackerSoldierLeverPants file included (has the tab to fit into the NutcrackerSoldierLeverBelt). 19Dec22: Removed square peg Arm (old design that should not have been included), renamed round peg Arm (file name was…
Nutcracker over 24 inches tall printed on Prusa Mini+. Printed with PLA at .2 mm layer height 15% infill (I like gyroid), 2 perimeters and .4 nozzle size. No supports required (the head printed fine upside down without supports). Parts…
I combined 2 ideas for a more efficient design. There is a small hole for the nuts. Crumbs can be easily removed from here. 0.4mm-0.6mm Nozzle 0.2mm layer height 15% infill (rectilinear) 3 perimeters 4 bottom layers (0.8mm) 4 top layers…
****Find all of my exclusive content on my Thangs.com profile **** It's the holiday season! The nutcracker is roughly 15 inches (38 cm) tall. Shop the filament we used in this model on our Amazon Storefront As with all of our models, this…
This is a remix of the Dream 3D Christmas Nutcracker statue by Dream 3D . It adds a small connector hole to the bottom of the model so that it can be used as a lid topper for the Twist Lock Trick Box . Please direct any support to the…
🎄 Modern Nutcracker Interpretation This modern take on the classic nutcracker is Deltaprint’s contribution to this festive theme. The nutcracker is quick and easy to print, and it looks great both on its own and as a set in two sizes…
Hi all ! Very happy with the basic model but something was missing… So I decided to add a bent arm with a halberd… Then increase its size for an 80 cm model and bonus make blue bands on the sides of the thighs… Obviously full PETG for me……
in the Italian Christmas tradition like to consume dried fruit including nuts !!! so why not sit down and design a nutcracker made to ho .... I have provided some knurling in order to hold the nut more easily in position during the…
Christmas Elf Nutcrackers are the perfect way to bring holiday cheer to family and friends! Features: Two designs (Alvin and Buddy) 22 inches tall (56 cm) Friction connectors (no glue required, but you can if you'd like) Instructions:…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
The all time classic, a Traditional German Nutcracker! I've designed this one based on a real woodcrafted piece of my Grandfather. As i wanted to practice on designing, i gave this one a try! Tolerances are not high, so everyone can…
I needed a nutcracker, so here it is. The hinge mechanism is inspired by Gyrobot's aerospace nutcracker. This is a print-in-place design with 0.2mm clearance. No supports needed. Added a second version with a slightly smaller “small” side.
The leverage nutcracker made of carbon filament for cracking walnuts and other nuts. Print instructions STL: https://www.myminifactory.com/object/3d-print-fiber-force-leverage-nutcracker-23108
Welcome our new design of Nutcracker, you can easily and quickly crack walnuts and other nuts. The 3D model consists of 6 printed parts, and screws. Easy to print. No supports needed. We recommended printing this model from Prusament PC…
Meet the Articulated Nutcracker Buddy — a small but mighty Christmas companion full of festive charm! 🎁 Height: 63 mm 🎄 Features articulated legs for playful posing 💫 Perfect as a holiday desk accessory, shelf sitter, or a fun collectible…
Make great looking Nutcracker cookies! Printed in PLA+ with a .2mm layer
Here is the model for Nutcracker Bear. The Nutcracker is a good Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for The Nutcracker? maybe he can keep Barry Company. I hope you enjoy, and…
Nutcracker Marvin designed to be printed in parts to allow separate colors without requiring an MMU and press fit. Notes: Arms, Legs - work best when printed with a brim. Arms/Arm pins/Cuffs/Hands/Legs/Shoes/Soles/Laces (and the parts to…
09Apr23: Initial release Nutcracker Drosselmeyer designed to be printed in parts to allow separate colors without requiring an MMU. About 12.75" tall without base. Notes: Recommend assembling from the base up Base without date included…
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 60 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
Just a nutcracker based on super old-school designs, celebrating a bit of my own German roots. I wanted it to play to the more simple classic designs with painted facial details, rather than three-dimensional ones, so the only facial…
I needed to crack open a load of walnuts, and wanted to continue learning to use Fusion360, so I designed this nutcracker as a solution to both! It's shaped like a mushroom because it's fun. I printed all the pieces with 4 perimeters and…
Modified version of Meatier nutcracker. It's bigger so it can be used for nuts up to 5cm in diameter. Handle was made smaller to print faster and be better fit to the hand at this larger scale. Hole was added at the back of the chamber to…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Oh Oh Oh ! Un casse noisette à imprimer multi-couleur avec MK3S. J'ai conçu le fichier STL Original pour offrir des porte clés pour les fêtes de fin d'année. Le fichier peut être agrandi selon vos envies (déco de sapin, etc.). Je mets les…
PRUSAMEN Galaxy Black - PETG Body - Corp : Layout - couche - 0.3 Screw - Vis : Layout - Couche - 0.2
The nutcracker simple model can be resized in slicer and painted in your choice of colours. I have given a full model that will require supports or broken down parts to print in any size you like it can be used as a tree ornament. Print…
Printed each part at .2mm height with 15% infill (except the arm joint at 100%). I used CA glue to hold all the parts together, there are pins in each for alignment, but glue is still needed. I used a piece of filament for the jaw mount.…
Nutcracker with conical chamber The print takes 7.5 hours and around 125 grams of PLA Works OK-ish for cracking walnuts size 35mm and for almonds. I printed it in PLA but has some flex to it. If you print it from something else please…
Support hat brim and beneath hands. Print 0.12mm, 16% infill, 3 perimeters.
I had the opportunity to print only a reduced version, under a small hazelnut. The current version is calculated on nut with dimensions: 38 х 31.1 х 29.5mm. 'Oreshek.stl' is a nut model with maximum dimensions for nutcracker. You can use…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Part List 1 x Arduino NANO board 1 x Arduino NANO Shield I/O 1 x USB-A to Mini-USB Cable 1 x HC-SR04 Ultrasound sensor 4 x Micro servo SG90 9g 1 x Buzzer 6 x Female/Female Dupont Wires 1 x battery holder (stacked 2x2 a total of 4AA…
The model shown in the photograph was printed and then post-processed. The post-processing involved first applying a layer of inexpensive epoxy adhesive, sanding, applying a spray primer for plastics, sanding again, and finally two coats…
Simple to print nutcracker for small nuts. Works well with PLA. I use Numakers PLA+ Print as hot as possible with as little little cooling as possible for maximum strength.
Christmas Pyramid Candle Carousel
be careful when you release the hinge! you can use a slotted screwdriver ;) you can also use it as a plier for opening bottles, hold or clamp something.. realy strong geometrie
This Model is a Remake with some additions, from: https://www.thingiverse.com/thing:3315031 ############################################################################ Here is the original Text. This is the nutcracker that Micheal Gives…
I like the idea of tree supports for this. Unlike most of my designs, I intended this one to be painted. That was part of the project idea my daughter wanted to do. So, its one piece. I intend to print at 175% - 200%.
Bring the magic of the holidays home with this beautiful 3D printable Nutcracker figure! 💂♂ This classic soldier, featuring a uniform and majestic hat, is an essential piece for any traditional Christmas decor. This model is perfect for…
After many attempts, I think I've found the perfect design. The knurled knobs provides a good grip and there are no nuts it can't crack! I strongly recommend using PLA+ and the largest nozzle you got. Prints without supports. Print…
Recommended print settings: Material: PETG Sliing mode: Vase mode Perimeters : 1 Layer height: 0.12mm First layer height: 0.2mm Solid bottom: 16 Speed: perimeters: 60mm/s External perimeters: 0.54mm Others settings is on you… So make fun…
A Nutcracker Nose Replacement
Nutcracker for hard hazelnuts and other nuts. Better than a squirrel! It is useful for cracking hazelnuts, walnuts, almonds, and other hard-shelled nuts. ** Updated version 1.4 - Redesigned body and new reinforced design Use PLA or PETG…
This is an easily printable, basic nutcracker with moving arms. It prints in different pieces so you can print it in different colors even if you don't have a multicolor 3D printer. The red nutcracker in the pictures was printed with AMS…
Design Concept The Nutcracker Head Keychain captures the iconic nutcracker soldier's head, characterized by distinctive facial features and a festive hat, making it an elegant and classic accessory. Purpose This keychain serves both a…
Use 50%(+)infill, 4 perimeters to decrease the bending and turn on the support for the end cylinderical surfaces. There are some air boxes in the handle, don't waste support there. Additional necessary items , you found them on a Prusa…
UPDATE: Pivot Pin Corrected UPDATE #2 : Logo Background (White) is corrected. The 2 oval parts were found by user LarryC_3040651 to be thinner than the rest, and not on the build plate. Here is my 2 ft tall nutcracker for any Steelers…
Bring the rhythmic magic of the holidays home with this classic 3D printable Nutcracker figure! 🥁💂♂ This little soldier, dressed in his uniform and holding a tiny drum, is an essential piece for any traditional Christmas decor. This model…
Designed in Fusion 360 at the request of my wife. Scale both the nutcracker and the stand together and print in festive colors! Dimensions : Nutcracker: 280 x 87.4 x 5.4 mm (11 x 3.4 inch), Stand: 37.8 x 18 x 5.3mm PolyTerra Lava Red:…
This Halloween edition nutcracker figurine exudes eerie sophistication with its gothic metallic finish and hauntingly detailed craftsmanship. Standing tall and regal, it dons an elaborate uniform adorned with intricate carvings and dark…
How many Time Lords are needed to crack a nut? Only one if he or she has this TARDIS nut cracker! The Cyberman helmet is an ideal complement as "Handles" for the screw, if you know what I mean. Print Settings Printer Brand: Prusa Printer:…
This is one very tough Snowman which will not let you down even after winter holidays. Print instructions Use PLA or PET-G (better PET-G) Print all the parts upright as they are in the files, no supports needed (only bridging). 0.2 mm…
Model I made using blender (no supports needed for most printers)
The Red Coat of the Nutcracker Category: Sculptures
Material: 72 g ASA, PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 50 % Gyro / Wände 7 / Schichten 7 oben, 7 unten / No Support Zusätzliches Material / additional material: 1x Schraube / screw M4 x25 mm + Mutter / nut Stahlstab / steel…
stampato con supporti organici solo dal piano di stampa. materiale utilizzato PLA+ eSUN bianco osso temperatura: nozzle 230°C, print bed 60°C spero vi piaccia :)
This nutcracker is very entertaining: place a wallnut on the plate, place the guillotine part above it and smash it! The print consists of two parts, the bottom part and the guillotine. On the left and right are guide rails so the blade…
Lo schiaccianoci ha la vite con filetto trapezoidale a doppio principio. Questo permette di avere una buona robustezza ed un avvitamento che richiede meno giri rispetto ad un filetto a un principio. La portina evita che i frammenti…
I was looking to build a nutcracker for the upcoming season. Quickly I decided for the screw type (less prone to "overcracking" the nut) Target object should be walnuts. I wanted the cup to be closed at one end in order to catch the finer…
Make your christmas cool with this one single object Category: 3D Printing
Simple ornament of a nut cracker / Nussknacker
Bring the rhythmic magic of the holidays home with this charming 3D printable Nutcracker figure! 🥁💂♂ This little soldier, dressed in his uniform and holding a tiny drum, is an essential piece for any traditional Christmas decor. This…
I have printed this nutcracker figure with no issues. I hope you enjoy the build. I highly recommend printing him standing up
Skeleton Nutcracker – Guarding the Underworld in Style March into the eerie season with this bold twist on a classic! This Skeleton Nutcracker is a spooky-meets-whimsical remix of the traditional holiday figure — perfect for Halloween,…
This is model of simple nutcracker. To make part stronger I recomended to use 3 perimeters and 5 top and bottoms solid layers and at least 70% of infill. Holes for M4 screws in lever should be tapped M4 thread. Hardware needed. -1x…
0.20mm x 10 loop wall x 100% infill + tree light support
A new 3D figurine generated by AI, a Nutcracker Sculpture. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
Nutcracker for hazelnuts. There is two versions of screw. Red one is fully printed, works well, cracks 9/10 of hazelnuts. Blue one is better, cracks 10/10 hazelnuts, but you need 1x M5x70 screw, 1x M5 nut and some pads under screw head.…
Cascanueces de tornillo ideal para abrir nueces sin problemas.
This is a fun holiday print that is easily customized and personalized. Jaw lever snaps in place to allow motion. Add some craft hair or felt to the head and jaw for an authentic look. I based the design on traditional wooden soldier…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
I made this nutcracker ornament keychain as small Christmas gift. Because I don't have a multicolor printer I designed it to print in multiple colors using filament layer change. I used 5 colors to make this. Red, Yellow, Beige, White and…
A handy nutcracker. You just have to glue a M8 bolt and its nut (!). Support not required. Printed with 30% infill and it works fine. Print Settings Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Kitchen & Dining
Recommended print settings: Material: PETG Sliing mode: Vase mode Perimeters : 1 Layer height: 0.12mm First layer height: 0.2mm Solid bottom: 16 Speed: perimeters: 60mm/s External perimeters: 0.54mm Others settings is on you… So make fun…
Detailed 3D printable Nutcracker Soldier King Come To Life figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
I saw this in an antique store and I thought I can do this. 3x 3mm x 45mm screws and 6 3mm nuts are needed use the two nuts on each screw to lock them in place you could use thread lock or ny-lock nuts as well. Print Settings Printer…
Nutcracker Soldier King, a collectible figure modelled for FDM printing and supplied ready to slice. The mesh comes in two files: an STL, ready for any slicer, and an OBJ that keeps the colour of each vertex, for whoever wants to paint it…
Prusament Style Nutcracker This prusament style nutcracker is the perfect add-on for every 3d printing enthusiast. Visually based on the Prusament coils, it not only looks good, but also has good stability thanks to its round design.…
Here we meet Bed Head Ben, in his regular routine. Wake up, put on a nice shirt, and got to work… from home. This is 2020 if it were a nutcracker. I recommend printing it with 60 degree supports and a raft, and with a support blocker…
A festive twist on a classic! 🐶💂♂ This unique 3D printable figure combines a beloved dog character with the traditional Nutcracker soldier uniform and hat. It's a charming and unusual piece for any dog lover's Christmas decor. This model…
EN: Nutcracker for walnuts and other nuts. Version 2 has been designed to prevent individual nuts from occasionally popping out at the Version 1, and the stamp has been made movable for better adhesion. Nevertheless, it may still…
The Nutcracker that looks the way it is described by Tchaikovsky. Easy to print and easy to paint.
I like the laooola Nut-O-Mat ( https://www.thingiverse.com/thing:2705492 )but, for me, it is hard to screw. I lack strength. So I made a piece to help screwing. It adds at the screw head. I suggest you to put it when filament is warm,…
![The Nutcracker [no support]](https://media.printables.com/media/prints/338556/images/2893908_c79a54e9-f528-4665-8752-be268d432df4/pxl_20221212_171324100.jpg)
