1,642 models
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
This is a reconstruction/remix from the original one that you can find on thingiverse here .
No Support. Glue not required.
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
These knobs can replace both the large and small knobs on a Maytag or Whirlpool washer and dryer. Backstory: My large timer knob cracked on my Maytag dryer after only two years of use. On removing the broken part, I find that the knob was…
Little Green Army Women : Forward Observer. Pairs Nicely with This model in Myclub
Print this in your go-to meeple color (mine is green) or use your favorite fun filament colors – dual-color meeples ?! Mix and match! Swap out your existing cabinet/drawer/closet knobs with: Meeples of the same color – nice uniform look…
Warning triangle compartment knobs VW passat b6. I made this 3D model to fix my car, it worked even if it's not perfect. I hope it will be useful, as I can see from internet the same knob are used in other VW model than passat. I needed…
EN: Long in my head, now finally realized. Holders for the honeycomb-structure-remix , or the grid and the holder . The hexagons are intentionally relatively precise so that the “buttons” adhere well to the honeycomb structure. This might…
Gears are cool! I'd seen a few axis visualisers and such like in the shape of “gears”, but most of them were artists impressions of gears (rectangles or trapeziums stuck on the outside of a circle) rather than proper involute (or…
Der Trenner teilt eine Ikea Obstschale in 4 verschidene bereiche auf, damit das Obst sich nicht berührt
Lobster! Print in place, with no supports needed. Work in progress, feedback appreciated :) March 5, 2024: version 5 is complete! There are two different editions. V5-A has much freer leg joints, so that it can be handled more roughly and…
Want to progress your rock climbing prowess while completing simple household tasks? Transform your morning routine into a high octane test of endurance and will with a quick swap of your cabinet hardware. These cabinet knobs will add a…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666 DO NOT SCALE. There is 0.4mm…
Update 01/07/24 (07/01/24 for the rest of the world): “Wrench” model fixed to have looser tolerances so that there isn't any issues fitting over the knobs. K1 Max SCREWS_TILT_CALCULATE config added, screw locations courtesy of…
Clamping Knobs for metric screws and nuts. Sizes: M4, M5, M6 and M8 Just press the screws or nuts in - rescale in your slicer if they need a different fitting. The provided gcode includes all sizes. Happy printing! Print instructions…
Knobs and handles for doors and drawers, The screw hole is reinforced with 3 perimeters, I recommend when softening the layers at the top and rounded parts, they look better Update!!! Added stl model files Here you will find the 2nd…
This is a collection of knobs i designed for M2.5 to M8 screws. I use them in my designs to adjust screws without needing tools. Those knobs are designed for standard internal hex screws with cylinder head. The head dimensions are…
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Its My GCODE what i use. Mein GCODE was is so nutze. ------------Start Code----------------------- G21 ; set units to millimeters G90 ; use absolute positioning M82 ; absolute extrusion mode M104 S{material_print_temperature_layer_0} ;…
This is a remix of https://www.printables.com/model/253408-customizable-lego-compatible-text-brick-key-fobs While the original creates a perfectly fitting LEGO brick, the ring to which you attach a keyring lies flat on the print bed. This…
Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…
RC crawler obstacle for your Axial SCX24 or Traxxas TRX-4M! Designed to fit just on a print bed for a MK3s. Wide enough for both an Axial SCX24 and a Traxxas TRX-4M. I printed this in PETG (but PLA works as well) using fuzzy skin to help…
Some people really like the wheel on the Bosch PBD 40 drill press, others replace it with a traditional 3 axle cross. I got inspired by a different idea by user mbatorowicz over at Thingiverse. He added a knob to the wheel. However there…
Lobster The body is divided into multiple interlocking segments, allowing for fluid, life-like movement from the head to the tail.features anatomically inspired textures, including the ridges on the carapace, segmented tail plates, and…
The source marked this model as adult content.
Crawler Obstacle #1: Simple mountain. Exactly as it sounds - a typical mountain climb for an RC crawler. Scaled to fit exactly on a MK3 print bed, and width right for an SCX24 or TRX4M. I printed with PLA, turned fuzzy texture on to help…
New version 2.0 Printing The crankcase is printed with support on build plate. Print the piston pins with brim. I printed with PLA+, layer height 0.16 mm. Dimensions 70 x 68 x 50 mm. Weight 0.050 kg. Assembly - Build the crankshaft using…
RC Crawler Obstacle #3: Flex Twist. An obstacle designed to test the flex and twist of your Axial SCX24 or Traxxas TRX4M! As created, it will just fit on a MK3 printbed. Printed in PLA with fuzzy skin to help with traction. You can see it…
Movie Prop From The Movie 'Obsession' (One Wish Willow)
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
Alicia's mask (latest version is Rev4), I revised it a bit to bring the cheeks in and modified the lips a little. Since then, extra details have been added (Big thanks to Zlatri for sending me a nice reference shot of the masks side) . It…
The metric system is great, but sometimes you need an inch based version. These knobs are for 1/4-in and 5/16-inch bolts or nuts, and can be used in either the male or female version with the appropriate additional hardware (as shown in…
-Material: ~ 2gm -Printing time: ~ 0.2 hrs -Recommended quality: 0.2mm -Dimensions: 22 x 22 x 12 mm If you like my work, don't forget to buy me a coffe ☕ You can also follow me on my social networks: Linktree: https://linktr.ee/Alitaria
In the woodwork shop we often need knobs to finish some Jigs. They can be very expensive so I dicided to print them on my Bambulab A1 3D printer. Aded metric M4 Bolt or Nut with 3 diferent diameters of the body - D20 , D 25 , D 30 Aded…
Summary No supports required. Just slice and print!! Based on Articulated Shark from McGybeer and Lobster from rowiac . After printing, the tail and the jaw should get free with a little force. Articulated Lobster by damienfremont is…
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
I was always frustrated with the original Lack Enclosure because the knobs were constantly falling off, and the hinges were not holding the doors well (especially, when you lift the enclosure, the doors could just fall off). I got an idea…
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
This cute lobster fidget toy is the perfect fidget for the little ones. It has articulated joints along the body. Available to print for personal use.
A flexible fidget lobster. Joints might be a little stiff, but with some movement should loosen up nicely. Enjoy! Check out my homepage for more of my articulated models
A fruit bowl in Voronoi design that can be printed in any size by changing the scale. Eine Obstschale im Voronoi Design die durch Änderung des Maßstabs in beliebige Größen gedruckt werden kann.
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
The source marked this model as adult content.
For Minecraft fans and enthusiasts :) Recommended Print Settings These beads were designed to be printed in two colors, with a single filament change. The .3mf files have the settings pre-baked, including the filament change. Printed in…
An assortment of knobs for hex head nuts and screws. I have some variations with different diameters and spacers. Please contact me if you need a dimension that's missing and I'll see if I can add it. :) If you like my designs please…
Bob from Bobs Burgers. Updated (1.27.2024) removed old files. added .4 offsets overall to help with thin apron. (thank you Michael Roth)
Some knobs I designed for a project. SLA/FDM printable.
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
Inspired by my son - after he took my “wave” crawler obstacle and turned it upside down! Seriously! A simple print - that when turned upside down becomes a simple teeter-toter or balance-bridge for your rc truck. Can you get it to…
Insert your standard hex nut or screw, press-fit ⭐ Fits standard hex nuts from M6 to M12 -Designed with deep finger grooves and certain shape for maximum torque and grip -Optimized for hand tightening in tool-free applications Print…
This is barrier mold for fingerboarding. Doing it yourself is better option than buying it from internet for like 20$. My settings and material: PETG 15% infill 0,20mm layer height 3 wall loops To hold 2 parts of mold i used clamp 1 or 2…
Hi! This is the latest revision on my uber-accurate Starfleet combadge. My first attempt at this came back in 2020 when I had only reference images to go off of. I later acquired a badge from the now-closed Xscapes Props, cast from a…
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
skate park compilation by rafster300 on Thingiverse: https://www.thingiverse.com/thing:4794263
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…
Knurled thumb knobs for ISO M4, M6 and M8 Hex nuts or bolts. Diam = 18mm, Thickness = 10mm. Printed with PLA, 0.4 nozzle, 0.2 layers and 40% infill. Also included : 3MF containing my preferred custom G-Code and all settings. Updated :…
Simple ergonomic knobs for M5 or M6 bolts/nuts.
This is the core 2x2 modular dungeon tile from my Masterful Dungeon tiles system. Each tile features a reusable base and a swappable top. The tile is designed for either magnets (5x2 mm neodymium) or clip connectors. Use it to build…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
LCD knobs for CORE One(+), Mk4(S)/Mk3.5(S), XL, Mk3S, and Minis, with optional accent color ring. Fusion 360 file provided. Update 11-13-2024: Added MMU version. I was a fan of @bogdanko's display knob for a long time, but the advent of…
I see that the first edition is liked so I prepared 2 edition .I mostly give m3f files, I will try to make models in stl files as well, but I can't merge some parts. Warning! Parts knob 3,4,5 have been updated and fixed, If you have a…
Here are various drawer knobs, based on my own design or inspired by existing design. Since I couldn't hold myself and create only one knob, I let me creativity running wild and ended up creating 20 different knobs! Yes some are very…
Some simple cabinet/drawer knobs. I added some knurling to give it a bit of extra grip and flair, in the same style I tend to use on other models . Attach them using a M4 Bolt/screw. It should, depening on your printers tuning, cut its…
Several designs of a shut-off valve for medicinal oxygen tanks or any tank with a similar mechanism. You can leave them attached to the tank for a semi-permanent shutoff mechanism.
Knobs and handles for doors and drawers - 3 edition , angular shapes I hope you will find a favorite among the models again I recommend when softening the layers at the top and rounded parts, they look better The combination of colors is…
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
I printed in PLA. I would use supports next time.
Gene in Burger Suit: Bobs Burgers.
Just a lovely movie-accurate prop to enhance your Charlie and the Chocolate Factory costume this year. One of the files has a set of 4 additional little feet as supports for your resin printer. Here's a vid of it being painted with nail…
This is a remix from kingCondorDanko's model of a skate obstacle. I detached the rail from the ramp, so that you can print them seperately.
This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…
I remixed it to include a void in the middle, to save some time and filament when printing. I also fixed a missing layer under the main arch that would cause the print to fail. I would strongly recommend not to print the original without…
Knobs and handles for doors and drawers - 5 edition - patterns I hope you will find a favorite among the models again I recommend when softening the layers at the top and rounded parts, they look better The combination of colors is nice,…
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
"Super Green." — Ruby Rhod.
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
Just a simple Stringing-Test 0.6mm base height + 25mm Tower height = 25.6mm Wall thickness = 1.2mm Print Settings Printer: Anycubic Mega-S Rafts: No Supports: No Resolution: 0.2 Filament: Printament PETG/PLA/others Green Category: 3D…
obscura · vase modern minimalist vase design in two sizes dimensions in mm: 178mm height version ~ x: 110 · y: 110 · z: 178 250mm height version ~ x: 155 · y: 155 · z: 250 note: the included print profile is not optimised to be water…
My daughter wanted her Schleich horses to have more fun - so I came up with those simple jumping obstacles. Made with FreeCAD, the poles are available in both single and dual extrusion variants. The crosses print without supports laying…
Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave UPDATE: New version 2 of the altitude gear system now available. - Now using module 1.25 gears instead of 1. Larger, stronger, more printable gear teeth. - New…
The Wave! This one is challenging - you better have good tires and good weight distribution. The “waves” are spaced right about the wheelbase of the smaller crawlers. Your truck will have to pull up both front and rear tires. Printed in…
These knobs are inspired by real control knobs on Marshall guitar amps . Come in 2 sizes: regular size and 200% size. They have 3.5mm diameter blind hole for M4 bolt or 4mm screw. But please be prepared to use drill, because these small…
Replacement knobs for Motorola 2-way radio. Modeled after XPR 6350 but will likely fit multiple models. Blender file included. Category: Replacement Parts
spongebobs, patricks, and squidwards house for aquarium
Replacement knobs for a Nord Electro, Stage, and Piano keyboards. They should work on series 5 and 6 but I'm not sure about others. There are two types: nord-knob: Regular knob with no pointer. nord-knob-pointer: Knob with slot for…
Potentiometer knobs with a nice grippy texture. There are four internal sizes to fit most potentiometers : standard 6mm diameter standard 6mm diameter with a deeper hole to cover the fixing nut larger 6.35mm diameter (often used on…
I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…
Here are two shift knob designs with most common thread pitches to choose from: M12 x 1,25 M12 x 1,5 M10 x 1,25 M10 x 1,5 Knob sizes: Knob1: lenght 80mm, diameter 40mm, thread depth 40mm Knob2: lenght 90mm, diameter 40mm, thread depth…
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
