Search results: ok

Sort order

53,807 models

P
Printablesitguru

strong cable wall hook

a strong cable wall hook with material thrift. PETG 4 outer layer 30% infill

Print approx. €3.69–€4.52 excl. taxPreliminary estimate for one variant

Downloads
43,521
Likes
15,312
Rating
4.95
P
PrintablesPieSupplies

Desk Bag Hook

This is a desk hook I designed to hold my laptop bag at work. What makes it convenient is that it fits on multiple desk sizes not just one. That way you can put it in your bag and use it wherever you are. Print instructions This is a desk…

Print approx. €2.29–€2.79 excl. taxPreliminary estimate for one variant

Downloads
32,196
Likes
8,556
Rating
4.86
P
PrintablesPrintical

Flexi Sloth - Hook Claws for Hanging!

>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
19,797
Likes
6,561
Rating
4.93
P
PrintablesKuba

Bookmark demon hands

support needed coz of claws. i printed mine on 0.15 but on 0.2 will look great also. Orginal Link: https://www.thingiverse.com/thing:5222826

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
17,952
Likes
6,007
Rating
4.82
P
PrintablesAdrián Vidal

Laptop stand -Hex-Laptop,Macbook, iPad and e-book Stand-Organizer fully customizable

This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…

Print approx. €7.95–€9.71 excl. taxPreliminary estimate for one variant

Downloads
13,872
Likes
3,018
Rating
4.92
P
PrintablesPeter Farell

Blastoise Pokemon

Set the Blastoise Free!!! Blastoise Pokemon : Loose Turret Fixed (1.16.2026)

Print approx. €8.93–€10.91 excl. taxPreliminary estimate for one variant

Downloads
13,620
Likes
1,666
Rating
4.71
P
PrintablesRESTLESS DESIGN

Simple & Strong Hook

New version with hidden screws HERE . New dual version HERE . Simple hook that is strong and quick and easy to print. There is no support needed for this print. The hook can be installed using two small screws. Support If you'd like to…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13,325
Likes
4,662
Rating
4.99
P
PrintablesGonz Heredia

Pokeball

Hello again! I had been wanting to make a Pokeball with my printer for a while, and although I had initially thought of using one of the existing models, this time I wanted to make the model from scratch. I was inspired by several of the…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
13,013
Likes
5,959
Rating
4.86
P
PrintablesVC Design

Strongest Small Wall Hook

For larger screws: scale the hook up in the slicer

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
10,775
Likes
2,883
Rating
4.95
P
PrintablesVC Design

Strongest Wall Hook Collection - 6 variations ( Parametric )

Extra strong wall hook collection - 6 variations + STEP file

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
8,505
Likes
3,317
Rating
4.97
P
PrintablesVC Design

Strong Wall Hook

The Strong Wall Hook is a compact yet durable hook, designed for simple and reliable wall mounting. It can be fixed with two screws, ensuring strong attachment and stability for holding items like tools, bags, or accessories. Thanks to…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
8,189
Likes
2,059
Rating
4.97
P
Printablestur_bo_des_ign

Shopping Cart Coin - Shopping Chip - Einkaufswagenchip - Einkaufswagenmünze - Shopping Cart Token - Trolley Token - Shopping Cart Chip

This shopping cart chip is designed for shopping carts in the EU/Germany. The chip is made of durable material and has a special shape that fits perfectly into the slot of a shopping cart. The chip is easy to use - Just insert it into the…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
7,055
Likes
400
Rating
4.85
P
PrintablesCameron

Hands-Free Book Holder

UPDATE: I've re-uploaded an iteration 2 (i2), now works better, is sturdier, and much easier to assemble! I also uploaded a version without the BOOK text. Choose based on your preference. Do you like to read while you eat? Do you often…

Print approx. €1.68–€2.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,778
Likes
1,430
Rating
4.73
P
PrintablesNilsGFX

Mewtwo Pokemon

A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
6,698
Likes
760
Rating
4.62
P
PrintablesCalebTimoteo

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant

Downloads
6,500
Likes
2,486
Rating
5
P
PrintablesMaxstudios

Pikachu Pokémon Figure

NOTE! Im not affialted with Pokémon in any way with this model. I tried making Pikachu from Pokemon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need to…

Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant

Downloads
6,339
Likes
452
Rating
4.38
P
PrintablesFC2M3D

Cubone Pokemon Skull Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
6,166
Likes
1,216
Rating
4.86
P
PrintablesArchipel

Harry Potter Bookmark

Printed with regular 0.15mm quality profile in Prusa slicer with PETG .

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,735
Likes
997
Rating
4.86
P
PrintablesNilsGFX

Zekrom Pokemon

Pokemon Zekrom made with 3D Scanner. Print needs a lot of supports but comes out great! Printed in Galaxy Black PLA at 0.2mm standard Prusa settings on a MK3S.

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
5,392
Likes
522
Rating
4.91
P
Printablesecoiras

Joycon Grip with Front-Looking LED Windows

A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
5,310
Likes
1,015
Rating
4.89
P
PrintablesJakey

Joker Mask (Persona 5)

A P5 Joker Mask I drew up since I wanted to take a whack at making something more organic than the stuff that I usually make. I've made the eyes as separate components and thus they can be printed in a different color from the Mask Body.…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
4,757
Likes
568
Rating
4.94
P
PrintablesCalebTimoteo

Haunter - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Print approx. €14.64–€17.90 excl. taxPreliminary estimate for one variant

Downloads
4,420
Likes
1,269
Rating
5
P
PrintablesVC Design

Strongest Shower Door Hook

Strong shower door hook for all your towels and accessories :)

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
4,387
Likes
1,217
Rating
4.87
P
PrintablesCalebTimoteo

Bulbasaur - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant

Downloads
4,157
Likes
913
Rating
5
P
PrintablesVC Design

Strong Wall Hook

Ultra Strong Wall Hook, mounted using screws d=3mm or double sided tape, adjustable using the STEP file :)

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
4,138
Likes
1,365
Rating
5
P
Printablesevax design

Cookie Cutters Gingerbread

It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
4,133
Likes
1,039
Rating
4.96
P
PrintablesPhilippHee

Miss Minutes Clock (Loki)

Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
3,966
Likes
1,879
Rating
4.99
P
Printables3D KIMBA

Stencil Book: Organize Your Creativity with Ease

After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
3,677
Likes
2,009
Rating
4.93
P
Printablesvzhny

Root Board Game 3D Buildings and Tokens (Every Expansion Including Marauder + Hirelings, Multicolor)

Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
3,544
Likes
468
Rating
5
P
Printableseastwg

SKADIS LEGO Minifigure Hook

*25th Jan 24 - added larger 2x3 version* Print upright with supports for the top hook and relatively high infill (I used 50%) to add robustness for clipping in to the board. See GCODE attached - tested prints with 0.4 and 0.6 nozzles.…

Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant

Downloads
3,228
Likes
874
Rating
4.88
P
PrintablesDutchDeveloper

Nintendo switch game cartridge pokeball

This pokeball switch gamecard holder is not only very nice display piece but is aswell very practical! It can hold up to 12 game cartridges. To print yourself one of these fancy pokeballs all you need is a 3d printer (obviously), White ,…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
2,992
Likes
614
Rating
4.89
P
PrintablesTantalus

Pokemon Booster Pack Dispenser Unit

A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
2,903
Likes
288
Rating
5
P
PrintablesJuice902

Ergo TikTok Bolt Action Fidget Toy

A more ergonomic version of SmileyPrinter's TikTok bolt-action fidget toy. There's a version with and without speed holes. Requires 7 6mm x 3mm circular neodymium magnets (ex https://www.amazon.com/gp/product/B096LZNZTQ). Included…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
2,900
Likes
756
Rating
4.75
P
PrintablesCelta

MacBook vertical stand

Vertical stand for MacBook with holes for ventilation. I found giahuy2201 's model but I noticed that it was missing holes for ventilation. So I added holes on one side for better ventilation and hole design matching the entire piece.…

Print approx. €5.64–€6.89 excl. taxPreliminary estimate for one variant

Downloads
2,869
Likes
539
Rating
4.97
P
PrintablesMikkoP HAM3D

QuickLoc Carabiner and Hook System (print-in-place + molle compatible) V2

Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,690
Likes
1,119
Rating
4.97
P
PrintablesMonte

Feather Bookmark

Simple, thin, feather-shaped bookmark. Printed in translucent PETG with color change for contrast.

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,605
Likes
449
Rating
4.95
P
Printablesevax design

Cookie Cutters Angel

It's a pastry cutter. It's very simple. Height is 6.2 cm, width 5.4 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
2,597
Likes
651
Rating
5
P
PrintablesFerro_Ignis

Hexbook (Notebook / Sketchbook A4). Hex book

I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,548
Likes
1,052
Rating
4.89
P
PrintablesJD

Pokemon Snorlax Single Extruder - Dual Color

I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…

Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant

Downloads
2,303
Likes
634
Rating
4.67
P
PrintablesMeganoodle

Simple crochet hook

Just a simple crochet hook, can increase size within slicer if needed, 20 minutes , less than a metre of filament. 0.2 res No adhesion No support. 20% or above infil.

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
2,298
Likes
273
Rating
4.77
P
PrintablesPeter Farell

Makau: Maui's Hook

Makau: Maui's Hook Maui can be found here: i https://www.printables.com/model/822182-maui

Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant

Downloads
2,294
Likes
469
Rating
4.88
P
PrintablesCaius Brindescu

Macbook Pro Stand

A stand to hold the laptop at an angle, so the display is in line with an external display. Print instructions I printed this with 0.2mm height and 15% infill, and it seems strong enough.

Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant

Downloads
2,290
Likes
286
Rating
4.69
P
PrintablesLuckyJinx

Health Potion Tokens DnD (no MMU)

Health Potion Tokens for DnD 5e. Single colour, or multi-colour with no MMU (add a colour change for the top few layers in the Slicer or manually hit pause to change the filament colour). Hand out Potion Tokens to your players so they…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant

Downloads
2,245
Likes
775
Rating
4.97
P
Printables44sunsets

The Observatory: a parametric vertical laptop stand for the M1 Pro/M1 Max MacBook Pro (2021)

I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…

Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,088
Likes
273
Rating
4.95
P
Printablesweirdswiss

M-Lok ForeGrip AR15

Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…

Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant

Downloads
1,909
Likes
408
Rating
5
P
PrintablesCalebTimoteo

Oddish - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant

Downloads
1,897
Likes
518
Rating
5
P
PrintablesMaxGyver

VW ID.3 (Cupra Born) charging cable hook

*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…

Print approx. €5.85–€7.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,855
Likes
175
Rating
5
P
PrintablesJack

dual folding Wall Hook

wall hook folding out for coats or phones ( print in place ) can also be scaled to 70% (50% for the bold)

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,821
Likes
459
Rating
4.89
P
Printablessh

🍂 Organic leaves set (realistic look)

Info: decorative organic leaves collection can be bent when heated (hair dryer for example) to look more realistic Print info: 0.2mm layer height no supports be sure to have perfect 1st layer but some bad 1st layer can also create…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
1,806
Likes
455
Rating
4.96

Towel hook

Designed for bathroom heater with tubes of diameter 25mm (fi) and distance between tubes 9-11mm (gap). I discovered that distance between are randomly, so I decide add some “spring” to make locked mounted even that. Print on side - like…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
1,743
Likes
514
Rating
4.86
P
PrintablesMich

Glasses Broken Frame Replacement

Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,735
Likes
260
Rating
5
P
PrintablesPeter Farell

Gardevoir Pokemon

Gardevoir Pokemon

Print approx. €9.35–€11.43 excl. taxPreliminary estimate for one variant

Downloads
1,654
Likes
271
Rating
5
P
PrintablesCalebTimoteo

Charizard - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant

Downloads
1,647
Likes
503
Rating
4.5
P
PrintablesCraftswoman.cz

34 Small Christmas cookie cutters / 34 Vánoční vykrajovátka / Ausstechformen für Weihnachten

🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
1,528
Likes
194
Rating
5
P
PrintablesMuurph

Pokemon TCG Deck Box for sleeved cards

This Pokemon TCG Deck Case is made to store sleeved cards. It holds a 60 cards deck as well as a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in multicollor,…

Print approx. €6.76–€8.26 excl. taxPreliminary estimate for one variant

Downloads
1,458
Likes
264
Rating
4.5
P
PrintablesPouOu

Bialetti Moka Pot Funnel ( 3 and 6 cup )

One fits 3 cup, while the other fits 6 cup. 6 cup have not been tested. I hava also made a tamper :-) It is only intended to collect the coffee in the funnel, not compress it. Print instructions You don't need support, but orient the…

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
1,377
Likes
112
Rating
5
P

Pokemon Chess MMU remix

You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.

Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant

Downloads
1,287
Likes
665
Rating
2
P
PrintablesCalebTimoteo

Ewok Treehouse - Star Wars Pen Holder/Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant

Downloads
1,283
Likes
441
Rating
5
P
PrintablesMart80

Cap holder / Basecap hook

Holder for baseball cap.

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
1,214
Likes
360
Rating
5
P
PrintablesJohan87

Pokeball Switch Cartridge Holder

Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…

Print approx. €2.11–€2.57 excl. taxPreliminary estimate for one variant

Downloads
1,196
Likes
190
Rating
4.8
P
PrintablesLinuTec

Ausstechform Mittelfinger / Middle finger cookie cutter

Ausstechform Mittelfinger / Middle finger cookie cutter

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
1,193
Likes
82
Rating
4.75
P
PrintablesBogas

Token Box / Token Holder 75x75

A simple token holder, great for board games. You can storage multiple boxes on each other.

Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant

Downloads
1,149
Likes
159
Rating
5

Pegboard hook

This hook is made for pegboard with CC 12mm and has a diameter of 3,9mm. for example Biltema's pegboard. This hook is perfect for hanging spanners, for example And this one is designed not to use screws

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
1,143
Likes
128
Rating
4.57
P
PrintablesCalebTimoteo

Minimalist Passport Book Cover/Case - Travel Essentials

Any feedback would be greatly appreciated . NOTE: Could try printing the case with ZERO top and bottom layers, perimeters: 8-10, honeycomb infill at 5-15%. Supports everywhere, style: grid, top Z distance: 0.25mm(for 0.2mm layer), top…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
253
Rating
4.2
P
Printableswootje13

Lightweight drip tray for the Pokémon Bulbasaur Planter

Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
1,097
Likes
253
Rating
5
P

macbook stand

this is a simple stand of macbook pro. Print instructions PLA, 14g, 35minutes with 0.3mm slice pitch.

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
1,062
Likes
122
Rating
4.87
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
1,047
Likes
85
Rating
4.8
P
Printables_Building_Arts_

Loki tiara

The tiara of Loki as seen in film and tv series

Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant

Downloads
1,045
Likes
288
Rating
4.71
P
PrintablesWarja

D&D / RPG token set and holder

I made this token set for me and my friends to play d&d. This tokens represents guild members and enemies. Includes token holder and fusion360 files to edit for yourself. Printed in PLA at 0.2mm in my Prusa Mk3S. Hope you enjoy. Update…

Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant

Downloads
1,024
Likes
198
Rating
5
P
Printablesharrypuuter

Macbook Pro Stand

Hi, there are many laptop stands out there, this is my take on it. It is printable on a Prusa Mini (you will have to print all parts seperately). Can be printed with standard PLA, 0.4mm nozzle and 0.2 mm layer height and of course no…

Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant

Downloads
1,014
Likes
104
Rating
4.73
P
Printables3DM-DeMeern

Hooks for Camper / caravan awning

Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
985
Likes
167
Rating
5
P
PrintablesBoogie

Shower cubicle hook

shower cubicle hook Glass thickness 6mm or 8mm

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
963
Likes
166
Rating
4.87
P
PrintablesOpenFigure3D

Super Saiyan Son Goku - Dragon Ball Z - Bust Statue

The Legendary Super Saiyan! Celebrate Goku Day (May 9th, 5/9 aka Go Ku ) with this amazing bust statue, sculpted by mavile3d for OpenFigure3D, featuring my favorite look of Goku, when he first becomes Super Saiyan in his battle with…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant

Downloads
962
Likes
149
Rating
5
P
PrintablesAme

Padel Hook

You can use a 15% infill. No support needed

Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant

Downloads
907
Likes
131
Rating
5
P
PrintablesPhilippHee

Door Hooks (expandable) / Tür-Haken (erweiterbar)

Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
899
Likes
89
Rating
4.89
P
PrintablesSteL

Multipurpose S-Hook

A simple and durable S-Hook that is also easy and fast to print! The hook on the picture was printed with Polymaker PolyTerra Sunrise Orange filament. The print is plenty durable printed in this material, but printing it in for example…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
896
Likes
67
Rating
5
P
Printableskubasi3

Detachable wall hooks

The base is here: https://www.printables.com/cs/model/151969-coat-hanger-with-hidden-screws I remade some others hooks compatible with it. Originlas are here: https://www.printables.com/cs/model/149213-hook-for-tesa-powerstrips…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
883
Likes
219
Rating
4.67
P
PrintablesAZ3D

low poly Psyduck (Pokemon)

Ah Yes! More low poly models! I have a low poly Psyduck for you! If you are a pokemon fanatic, or a collector, this will surely look great on your display! Don't forget to heart and follow (pls, I'm desperate)

Print approx. €9.63–€11.78 excl. taxPreliminary estimate for one variant

Downloads
857
Likes
121
Rating
4.67
P
Printablesnischno

Vertical MacBook Stand

Compatibility : Vertical Stand for MacBook Air / Pro with a thickness of up to 16.5 mm (17.5mm). Tested with MacBook Air 13" (2020, M1 and 2022, M2). Should work with any Laptop with a thickness of less than 16.5 mm. This includes MacBook…

Print approx. €2.33–€2.84 excl. taxPreliminary estimate for one variant

Downloads
838
Likes
241
Rating
4.5
P
PrintablesZenlayne

Fokker DR1 kit card - Famous Planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fokker Dr.I This is another plane for your collection : the famous Fokker Dr.I, which…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
836
Likes
155
Rating
4.73
P
PrintablesJoe

Arkham Horror LCG Token Holders

The holders where optimized for PLA and a layer height of 0.15mm. Assembly does not require any glue. Just snap them together. ---- Did you like my print? If yes please rate it ❤️ and post a photo of your results. 📸

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant

Downloads
818
Likes
158
Rating
5
P
PrintablesTomáš Kemr

Apple MacBook Air M1 Stand with/without logo

Stable stand inspired by MacBook Air M1 shapes, holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your MacBook if you want to save space on your desk. Printed with 4 perimeters (if you want to save…

Print approx. €8.02–€9.80 excl. taxPreliminary estimate for one variant

Downloads
812
Likes
80
Rating
4.71
P
Printablesjendakolda

Fox cookie cutter

Scale the model up or down based on your bite preference :). If you add your name on the plate, it can make a nice PF or christmas gift. For more silly cookie shapes visit my cookie cutter collection .

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
796
Likes
149
Rating
4.83
P
PrintablesSnuff Klko

Squirtle Pokemon funko POP!

Print & acrylic draw

Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant

Downloads
794
Likes
170
Rating
5
P
PrintablesPeter Farell

Meowth Pokemon Go

Meowth Pokemon Go

Print approx. €19.97–€24.41 excl. taxPreliminary estimate for one variant

Downloads
787
Likes
221
Rating
5
P
PrintablesCalebTimoteo

Blastoise - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Print approx. €24.10–€29.45 excl. taxPreliminary estimate for one variant

Downloads
785
Likes
354
Rating
0
P
PrintablesKnatterkopf

Hook/ Haken

Hey there, 12mm /25mm Haken 0,2mm PETG Enjoy and like it if you really like it :D

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
774
Likes
37
Rating
4.88
P
PrintablesMrRogers

Bookbinding Signature Punching Tool Awl Guide Imperial

UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…

Print approx. €7.94–€9.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
772
Likes
117
Rating
4.5
P
PrintablesSylveonika

Tiny Cookie/Clay Cutters

Cookie cutters for clay jewellery making that shape and cut clay into consistent and intricate designs, allowing for the creation of professional-quality pendants, earrings, and charms. These are super tiny cutters, the smallest ones are…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
756
Likes
231
Rating
2
P
PrintablesCalebTimoteo

Caterpie - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Print approx. €5.83–€7.13 excl. taxPreliminary estimate for one variant

Downloads
717
Likes
318
Rating
5
P
PrintablesN3D

Corona Hook

Hook for contactless opening of doors Print instructions Resolution .2 20%

Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant

Downloads
698
Likes
5
Rating
4
P
PrintablesLazlo

3D Printing Troubleshooting Gaming Tokens

I had a flash of inspiration last night! As I'm still learning to design and work my printer, I thought it'd be kinda funny to make tokens based on failed calibration tests, prints, and hardware. Since Monopoly has 8 tokens I decided to…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
684
Likes
332
Rating
5
P
PrintablesLegufix

Snowflake cookie cutter + ejector

My wife asked me to print a snowflake cookie cutter. Because the structures are very small I have also made an ejector to it. The cookies look very nice. I have printed the cookie cutter with PLA and a layer thickness of 0.2mm. No support…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
674
Likes
109
Rating
4
P
PrintablesGabor Gyarmati

Dual Color Bookmark with Voronoi Roses

A bookmark with roses, print it with filament swapping to get a dual-color print! For extra smooth surfaces, tick in ironing in your slicer!

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant

Downloads
667
Likes
175
Rating
4.5
P
Printablesbartosslajos

Simple goose cookie Cutter

Simple goose cookie Cutter. Use the "goose_cookie_Cutter_2" to cut and use the “goose_cookie_Cutter_stamp” to leave a mark on the cookie. Holmink.hu partner:

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
661
Likes
59
Rating
5
P
PrintablesSaphyreKry

Flying Dragon Book Nook - STAND REMIX ONLY

I purchased this model to make as a gift for my niece. The dragon and flames are beautiful and printed without any issues. The stand prints fine with a brim, but was a bit weak for my tastes. It obviously needs weight on the stand to…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
650
Likes
121
Rating
5
P
PrintablesPhilippHee

Miss Minutes Ghost Clock (Loki)

Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 199 mm x 171 mm x 26,8 mm. The dial has a…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
632
Likes
405
Rating
5
P
PrintablesCalebTimoteo

Dugtrio - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Print approx. €12.94–€15.82 excl. taxPreliminary estimate for one variant

Downloads
631
Likes
296
Rating
5
P
PrintablesPhrewfuf

BBQ Hooks

Made a very simple plate with three hooks to hold my most-used BBQ equipment since my gas barbie doesn't have any provisions for them. You'll need some countersunk M5 bolts, nuts and washers. And also some holes wherever you want to bolt…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
620
Likes
81
Rating
5
P
PrintablesPeter Farell

Goku with Halloween Fox Costume.

Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.

Print approx. €20.82–€25.44 excl. taxPreliminary estimate for one variant

Downloads
614
Likes
133
Rating
5