Omega Tweezers for multimeter probes
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
- Downloads
- 237
- Likes
- 78
- Rating
- 5
205 models
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Introducing: Omega-Man! The fully poseable action figure! Omega-man features 14 points of articulation, and can be made from mostly PLA. The Omega connectors should be made from something more wear-resistant like PETG, ASA, or ABS to…
Second set of Sonic figures based on Team Dark. Set includes... · Shadow (may make a second version with a less intrusive support pole) · Rouge · E123-Omega, Replacement Minigun, Base, and Outer Base (STILL PAINTING WILL UPDATE PICTURES…
Here's a symmetric, omega-type shape for nice, mid-range, recreational throwing. If it comes in too low, you can throw with more layover, or try bending the wings slightly upwards. Made in Blender 2.9 using the technique described in this…
Omega is the twenty-fourth and final letter in the Greek alphabet. In the Greek numeric system, it has a value of 800. The word literally means “great O”. As the final letter in the Greek alphabet, omega is often used to denote the last,…
Kerfur, NOW AVAILABLE WITH FACES! 4 face plates for your Dummy Kerfur, compatible with the V2 of the Kerfur head scaled to 150%. Plus, KerfurO Dummy Head V3 is included, now with an easy access spot to easily swap the face plates! V3 is…
This pomegranate box can be a great gift for someone you love. It looks great when printed in color changing filaments. After testing i think that with aligned seams you get much better surface quality. Printed with 0.2 layer height.
My son really likes this helmet and I guess I'll just have to add it to my ever growing to do list ; ) Cheers Jace. PS I thought it was called Oblivion hence the wrong file names ; )
Here it is, my biggest model, the gigantic, kick-ass, 1 meter long Omega Class Destroyer from Babylon 5. (thats about 40" for the metrically challenged). The ship weighs about 3.4kg, and is made up of 356 parts, and on my Printers, took a…
For fans of God of War. I found that this works great on my Razer BlackwidowV4 Pro green switches unlike many of the other keycaps on here. I had to slow down my ender 3 v2 to get it to print the cross that goes on the switch correctly so…
Tisk z PLA, celková délka je 65mm, pro moje ovládací tlačítko dostačující. Závit Whitwort 19z.
A replica of the Omega Sieveking headphone stand. The size is 25cm, so there is splitted version if you can't print it at once (this is my case). You need to glue the tube inside all parts. Tubes are a little bit smaller that the holes…
So that will have to be looked at prior to printing. As it was pulled from the model, I noticed the chest slighly different from each side of the neck area, subtle but noticable. I would centre it and split the chest in half, then…
Adapter to mount Moza R9 wheel base to GT Omega ART Simulator.
This is a 92mm long Omega Class Destroyer from the TV show Babylon 5. It is in scale with the Revell Babylon 5 Station model. It has some very fine detail and would be best printed at 0.05mm or finer. Make sure you print 2 of the outer…
Now you can have your very own little, or potentially large, Kerfur Omega! Ive printed it now in the normal scale for Dummy 13, and at 150% scaled as pictured. Printed with supports at both scales, at a layer height of .15. Model in…
A Fan Made model of the Omega Space Station from mass effect 2 and 3 The station isn't really scaled with the other ships in my collection but works well as centerpiece for a board. It is recommended to print the lower half of the…
A simple pendant with attachment holes. A nice gift for poly people :) Instructions I suggest printing this in PLA (it has a nice shiny finish) with the best quality you can (100 micron layer height with 30 mm/s speed should be ok). No…
A Omega Metroid. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
A modification of the DMS Omega cup design to optimise it for printing on an FDM printer, as well as reinforcing the 3.5mm port opening and headband openings. The design has been split into 4 parts, each part can be printed flat on the…
I found the original spike-style cup attachment meant the ear cups frequently popped free of the headband when taking them on and off, so I combined the Satyr 3's screw-in attachment with the broader design of the Omega yokes. This is a…
You thought the Ultimate Darkroom Test Strip Maker was… well, ultimate. But you were wrong. Because I famously don't know when to stop innovating . Presenting the newer, bigger, better, more polished, Test Strip Omega (and fun-sized…
Kerfur Omega V2, same model as last time, but you can print the screen separately to make it a different color! Mainly wanted this so the screen can be printed and not need to be colored in with sharpy. I am, evolving. Plus, I want to…
This is an adapter plate used to attach the 3D Printed Beavis Racing sequential shifter and a handbrake to the small mount included on GT Omega brand sim rig frames. This plate will likely work for a variety of other cheap sim racing rigs…
Réplique 3D de la clé Oméga de la série Locke and keys. Imprimer de préférence avec la meilleure qualité possible et des supports bien calibrés (densité interface de support de 83.333%) Testé avec une taille de 10 cm et de 5,5cm pour des…
Columbia Coatings offers an array of products for powder coat systems. Several of their items needed modifications and improvements for durability, performance and convenience. I designed these from scratch in Fusion 360, and ported them…
This is a make derived from the excellent POmega original : https://www.thingiverse.com/thing:4609453 I plan to modify it to turn it into a boat figurehead for a colleague. I reduced the number of triangles with meshmixer, Sketchup cant…
This is another remix of the Omega Boomerang , using the "bent stick" technique shown in the video below. Other than in the Keyhole Omega Boomerang , this one just has a slightly tighter elbow angle without changing the overall shape too…
Print in ASA for durability and UV resistance. 100% infill for best mechanical strength.
This is a remix of the Omega . It behaves basically the same, I just slimmed down the wings a little and rounded the elbow area, so I think it looks a little more elegant. Throw not too high and with about 30° of layover. As always if it…
A remix and update to my original model Omega Man. Adding another connector port to the back of the torso to accept a backpack or jetpack. Models included are torso V2, jetpack and backpack which can have other things added to it.
I wanted a place to more neatly put my Dymo Omega and the spools (a separate model) A first try, as you can see I wasn't sure what to do with the dead space, so you have nooks for some small items maybe. EDIT: I updated the model so it…
I use this on a GT Omega Pro wheel stand.
I made the model based on reference images only for my dad's birthday. I spent 50+ hours making it. It has an IKEA clock movement on the back of it. I spray painted all the parts.
I replaced the original tempered glass front panel of the case with this hex pattern front panel. Brought my CPU temperature down by several degrees (Up to 15°C in some cases). To replace the glas the front panel needs to be pulled off. I…
Alpha (Α or α) and omega (Ω or ω) are the first and last letters of the Greek alphabet, and a title of Christ and God in the Book of Revelation
A Shifter mount for the GT Omega Wheelstand, designed for the Thrustmaster TH8 but should also work for other shifters with table clamps, alternatively the model can be edited to punch some holes in case it should be bolted on. Disclaimer…
Flathop nub inspired by maple leaf omega. Print in TPU if possible - the softer, the better Attached a .STEP file if you want to modify it, for me it works flawlessly in ares G36 , no difference in comprasion to original. ps: of course,…
Simple opener. Description coming…
this one is printed in 50% of an actual size, if ladders broke off, i included two ladder models to replace them
This omega boomerang is pretty similar to some of my previous designs. It was made differently, though – it uses the fantastic Sverchok plugin, which enables parametric modeling in Blender. Throw low and with a bit of layover. Should do a…
Just a basic Gridfinity Box for Dymo Omega Spools and some tiny bits. Nothing crazy, but went well with my Omega Holder I also made.
The Omega Man - Charlton Heston - 1971 3D printable model.
The base is optional but adds stability and has a slot added for USB integration. Caphead screws to assemble: M4x35,30,25,15(2 of each) and M4x10(Qty3)
yust another Dymo Omega holder for Ikea Skadis
Version of the V2 Kerfur head, but with HURT. Includes a version with AI chip merged and not merged. Pair with cracked screen face plate for EXTRA EDGE. Use supports for main head. Version picture printed at 150%, and even at this scale…
Converts your old analogue photo enlarger chassis to a copy stand for your DSLR digital camera. Inspired by the product “Copy Camera Adapter for LPL 7700 / 670XL Enlargers”, which apparently isn't available to buy anymore (and which was…
These Rollers serve to reduce any Friction between Belt and Seat. Especially designed for GT Omega Bucket Seats with an angled cut out for the Belt. The Spacer is used between Roller and Bearing, you can also use two washer on each side…
It can be used for both type of AA cell rechargeable and non-rechargeable. You will also need 6 magnets of size 4mm diameter and 1.5mm thickness. The magnets go in their places on the 3D printed parts to attach the top and bottom parts of…
This is a remodel of the Capra headband yoke supporting the DMS Omega cups, utilizing M3 flat head cap screws. I was dissatisfied with the available remixes, as they were not made with FHCS, nor to be tangent to the cups of the omega,…
stampatelo in PLA con nozzle da 0.4mm e 0.15mm di layer STAMPA SENZA SUPPORTI
I've seen other mounts for the Omega powder coating gun, but they were too small for the Blukar 2000 Lumen rechargeable flashlight , that I use with my setup. The top opening is 26mm, so any other identically sized flashlight would fit. I…
Danke an Astraholic05 für die genaue 1:1 Kopie des Original-Clips! Ich habe versucht, diesen Clip zu drucken und zu verwenden, aber das Original-Teil ist für den 3D-Druck nicht optimal, deshalb sind die Halte-Nasen ständig abgebrochen.…
based of off transformers prime omega keys. one is full one is split
Print Settings Supports: No Resolution: 0,20mm - 0.30mm Infill: 15% Filament material: PETG Nozzle: 0.4mm
I made these simple castor cups as my old underlay and carpet was ruined from the castor wheel movements on my SecretLab Omega chair. I have the older 2020 Omega chair - no idea if the latest models (or Titan and different models) have…
Hello tous En premier j'ai coupé le bas pour faire apparaitre le logo, juste pour le style ! Ensuite je l'ai coupé en 3 avec 3D Builder de microsoft pour réduire le temps du print sur ma machine, je n'aime pas quand c'est trop long !!…
Omega styled BT-60 fin cans for both 24 and 29 mm motors. The Estes Omega is a classic two stage rocket that was the standard booster for flying the Cineroc . These are designed to be strong and efficient - the fins use cross members so…
Glasses holder design based on the letter omega with God of War runes inscribed onto it 2 Versions are available. One with the runes apart of the holder. Another with gaps for the runes to slot into. To make it easier to print the runes…
🏡 Gnomegate Cottage – A Whimsical Miniature for Your Fairy Village! Welcome to Gnomegate Cottage – a cozy, multi-level fantasy dwelling perfect for gnomes, fairies, or any other magical beings you’ve got living on your shelf or in your…
Dymo Omega holder for Ikea Skadis. Prints without supports.
Hammer blocker for a CZ P-01 Omega to prevent striking the firing pin. NOT FOR USE WITH LIVE AMMO. Can be printed two different orientations pictured without the need for supports. Any material should work fine, I used PLA+.
Mouse holder / pad designed for GTOmega Prime sim rig. Designed to use GTOmega screws, they sit flush with holder surface. There is a bit of flex due to length but not noticeable when in use. Length of pad is the same as GTOmega…
Upgrade your workspace with these pen/pencil holders featuring a squircle (rounded square) shape. Choose between either a helix or omega loop design. The stylish organizers are optimized for 3D printing and ideal for storing pens,…
Do you want to unlock the full potential of your Skadis board? Then why do you accept the plan laid out before you? The design and machinations of those who would determine the fate of your home decor? Stop accepting the default. Look at…
This is my first model for a squonker mod with DNA chip. Before any commercial use contact me.
This attaches using the 2 holes already on the Apex wheelstand. You just need to pop off the platic endcap and insert a nut for the screw inside the frame. I used the screws that came included with the wheelstand itself. Fusion .3mf file…
This is just the same as my previous Omega design in Blender and Sverchok, just a little wider. I actually like this one a little better, it seems to have a little more range and it is less floppy with its wider wings. This is an original…
It can be used for both type of AAA cell rechargeable and non-rechargeable. You will also need 6 magnets of size 4mm diameter and 1.5mm thickness. The magnets go in their places on the 3D printed parts to attach the top and bottom parts…
Adapt the GT Omega PRIME Fanatec Podium DD Bracket as the Fanatec CSL DD / GT DD Pro is 10mm narrower so needs 2x spacers. These spacers extend the profile ‘arms’ so you can securely mount your Fanatec CSL DD to your GTOmega PRIME cockpit…
This is a remix of the Omega Boomerang V2 . Thanks to the "Bent Stick" technique for making boomerangs in Blender, making this out of the Omega V2 was quite easy; I just deformed the Bezier backbone of the boomerang and made it a little…
Beltguide to avoid sharp edges and to protect the seat and its plastic cover. Two versions to compensate for the angle of the hole. On the Picture is a Bucketseat used from GT-Omega. Plasticcover of my seat has an thickness of 21mm.
This shuttle appears in the epilogue of Star Wars: The Bad Batch (S3E15). It is flown by the clone Omega. I don't know of any official name or specifications. A few specifications can be deduced from its (only) appearance. It is armed…
I added an ohm symbol to the basic electronics stencil. I had found another stencil that also had the common unit symbols (A W V <ohm>) and thought it would be nice to add those, and then realized that really only Ohm was hard to…
Teemo Omega Squad League of legends Version information / Files information STEP file: NO STL file: YES MONO version: YES AMS/COMBO version: NO MULTIPART version: NO Basic information of print: Printing material: PLA Support: YES (tree)…
Každý kdo má zkušenosti s hodinkami Moonwatch od Swatche ví, že toho moc nevydrží a často ztrácí díly :-) Hodinky je pak škoda vyhodit do koše, tak tady máte horní a spodní tlačítko. parametry tisku kvalita 0.10 mm 100% výplň 5mm límec…
This is a model of the Omega Enlarger 6x7 mixing box. The original part is flimsy, and hard to find used. The model and dimensions were taken from a scan of the stock styrofoam box. The model can be used to print your own, or as a…
Bracket to hold a Dymo Omega labelmaker on an IKEA Skadis pegboard.
Upgrade your workspace with this pen/pencil holder, featuring a distinct omega loop wavy design. This stylish organizer is optimized for 3D printing and ideal for storing pens, markers, brushes, or highlighters. Designed for both…
Omegamon Digimon Creature Model
This is a copy of the standard metal neg carrier for Omega 35mm and 6x6cm enlargers. You'll need to glue the little hinge pieces on with CA glue.
The model was created or optimized for resin printing. El modelo fue creado u optimizado para impresion en resina.
This is a 35mm neg carrier for Omega 35mm and 6x6 enlarger. You'll need to CA glue the little hinges on (TWO ARE REQUIRED). You may need to carefully cut the guide slots with a razor blade. The gap is very small and sometimes my printer…
I love this stamp, but it needed a handle to fit in with all of my other rubber stamps. If you have the right color filaments, you could do a color swap between the base and the handle, but I just used Plaid Multi-Surface Acrylic paints…
Autobot logo for DX9 Gabriel (Omega Supreme figure). Print as multi-color with yellow base and red Autobot logo. Attach to figure using sticky tack (blue, black, Quake putty, etc).
Omega letter knob, 6mm ID for splined potentiometer. 0.20mm layer height, 0.40mm nozzle Brim No Supports In my experience, thermal coefficient of expansion varies between filament types. This is a tight fit that works well for silks. If…
Custom helmet for Kommander Tatiana Sikora. Designed by Dragorium & Sculpted by SundayTaco
Tool for precise drilling of holes in the centres of the "OMEGA" and "Z" profiles used for fixing solar panels. Přípravek pro přesné vyvrtání děr do středů "OMEGA" a "Z" profilů, které slouží k uchycení solárních panelů.
A simple holder for the Dymo Omega spools. 8 spools fit in this holder.
Spreizdübel Omega B Stoßstange Untere Befestigung Drucken mit TPU der Dübel Sitzt sehr fest beim reindrücken ist schon edwas druck notwendig Passt aber sehr Gut.
Unique species of deer from Pleistocene China and Japan.
Made this model for a fun ECI. This is used as a type of flag to show that your firearm is empty. So others can see it no problem, I would suggest using a bright color. Used the Omega symbol from the God of War games. This will fit down…
For use with the Omega Superchromega C760, normally it only comes with the 35mm light mixing box, this enables you to do medium format films. I modified the original one so it saves print time and material. The model might look weird in…
This is a replacement Plunger/Press created for our Omega 8006 Juicer. Example is printed out of Black PETG. I would recommend increasing the layer count on the top, bottom, and walls to 6-8 layers to help it stand up to use.…
Build from technical Drawing in Fusion360. Printet in PETG.
My Dymo omega stopped feeding properly due to the feeder stop not having enough strength to hold back the gear. In Sweden, this product is called the Dymo Omega, but might be called something different where you live. The organizer…
A helmet and face plate based on funni Swedish man. Helm has the profile of the head/ear cut out to fit so it should fit snug and scale up to any desired scale! The helm can be printed flat on its bottom, and I would recommend some snug…