Domino / Tile / Rummikub Rack Scalable 🁴
100% scale pictured below, good for scrabble and rummikub
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
- Downloads
- 440
- Likes
- 82
- Rating
- 4.83
678 models
100% scale pictured below, good for scrabble and rummikub
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Domino jako výuková pomůcky do hodin zeměpisu, popř. geografie. Námětem domina jsou hlavní města a státy Evropy.
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Red Hood Domino Inspired Mask Pack Enjoy Category: 3D Printing
I love Tetris. I love how its simplicity has charmed a massive number of users since 1984 making one of the most played and recognized games of all time, the history of the game and its creator Alexey Pajitnov are also fascinating pieces…
When I need a bunch of Dominos for repeated dry fits to dial in my parts's sizes, I typically sand down standard wooden Dominos. By printing these I get the advantage of a lower price, less of my time spent preparing and marking them, and…
Hub for playing Mexican Train Dominos. I tried a few other hubs on Thingiverse but they didn't fit my Dominos so designed this quick one. You can use bybinhabr's Little Trains printed at 85% with this hub. Category: Games
It's a small piece, so you'll need a small nozzle. I printed with a 0.2mm nozzle and used a raft. Can definitely be printed with 0.4mm and small layer heights. No additional supports needed This can be printed with 0% infill, but I found…
Print a set of pieces and print the board, and you are set. The ten pieces can be arranged in the board to make any month, day, and day of week combination. The attached gcode has color changes for single extruders so you can see the text…
This jig helps mark the offset for both the Domino 500 and 700. This helps with aligning the domino to bore the hole center of your mark on face frames. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
A Kingdomino castle that fits in the box. Wall thickness optimized for 0.4 nozzles. No supports is required. Support / Reseller If you want to support me or sell my models, take a look at my Patreon: https://www.patreon.com/thomash3d You…
A coworker mentioned he had some broken and lost pieces to his Mexican Train dominos set. He asked if I could print him replacements and add a little accent train track around the center. Hopefully if you have one of these sets and pieces…
Green Lantern Kyle Rayner Inspired Domino Mask Pack Made 2 versions then mixed the two together. Enjoy Category: 3D Printing
These prints are glue nozzles for the Festool Domino sizes 5, 6, 8, and 10mm. Also included are a flushing adapter to clean the nozzles and a storage tray. The glue nozzle threads are sized to fit a Titebond 16 oz. glue bottle. The…
This set of pieces holds together eight trains and a two-piece train hub with a large domino shaped case. This makes a compact set that can be carried with your dominoes! This was sized to fit standard domino pieces. All files can be…
Domino holder that holds standard and professional dominoes.
This is a model for a replacement part for the Festool Domino floating tenon tool that has presets that are more compatible with the common plywood thicknesses. The ½", 5/8" and ¾" nominal plywood thicknesses are actually typically…
Each rack will hold 16 1"x2" dominoes laying flat. The rack doesn't need to be very sturdy so removing perimeters and printing at 5% infill cut hours off of the print time.
Filling lot's of mortises with wood glue before a glue-up is slow and tedious. These caps screw on to most PET bottles and make glue filling mortises for Festool Domino's a lot easier and faster. I use it only with white or yellow PVA…
This is a replacement engine for the popular Dominos game “Mexican Train”. My wife wasn't happy with the injection molded engines that came with the set she bought, so I modeled this engine to replace those tiny, poorly made pieces. I…
Its really handy as where the people you are playing with wont see what you have and its easier to manage! It can hold up to 20-22 pieces! 3D PRINTING SETTINGS Slicer : Prusa Slicer or Cura Layer Height : 0.2mm First Layer Height : 0.24mm…
This is an adapter for the Festool Domino Joiner (DF 500). It uses the CAMLOCK connector by @PeterH . Related: Festool Domino Cutter Rugged Case https://www.printables.com/model/710716-festool-domino-cutter-rugged-case CAMLOCK Adaptors…
I'm printing this soon and will add more pictures. ------ The 9x9 remix of my travel set!! Goes on a string or shoelace to put in any pocket or bag! 1 color change included.
This is a new version of Domino for people with reduced vision or blind. Everybody can have fun! 28 pieces Box Print instructions Nozzle 0.4 / 0.6 Infill From 10% to 100% Layer height From 0.1 to 0.4mm Other No need for raft or so. I…
Print with the numbers facing down, make the color change on layer 7. This was my inspiration for the design: https://www.printables.com/es/model/356497-domino-set
Print this with with the base flat to the print bed. You need supports just for the 2 ledges that insert into the track. I just painted them on and they come right off after the print is done. You attach the mount to the base of the…
These are cute little boxes for the Festool Domino DF500 and DF700 cutters and wrenches. They are remixed from the awesome Rugged Box (Parametric) designed by Whity . Update 2024.10.30: Added 3 mm and 4 mm wrench slot options for the…
Domino Tray Holder Are you tired of this happening? [insert image of your dominoes falling over and friends laughing at you] Don't let this be you, you need DOMINO TRAY HOLDER! Holds dominoes up to 7/16" or 11.15mm thick PRINT…
I sell this as a complete product here: https://www.etsy.com/listing/1507979093/festool-domino-micro-systainer-bit-case Protect your investment in Festool Domino bits with this carrying case. This case carries seven bits, along with the…
Achieve precise mortise centering on 12mm stock instead of the lowest 16mm setting the tool offers out of the box with this custom jig designed for the Festool Domino DF500. Perfect for non-structural projects, small boxes, and other fine…
This update is a new design from my original glue nozzles and include the following improvements: Split design separating the nozzle from the cap and permitting replacement of just the nozzle (or cap) if necessary. Added nozzle sizes…
Sasquatch - Base Support for Festool Domino DF 500 Extended base support for the Festool Domino DF 500 inspired by TSO DBF-45 BigFoot v2.0 When using the Domino on flat surfaces I wasn't happy with the handling. Instead of using the…
I built a mostly printed version of the jig then built a more chunky one using wood sidewall to mount the cross sliding rods. my jig is 125mm or 5 inch wide, 8 tall, 9 long, you can likely figure the rest out. printing: the router clamp…
Triominos Placement game for four people The rules of the game The aim of the game is to score as many points as possible by placing the matching tiles. The points that can be scored during a game are based on the numbers of tiles played…
Die Drehgriffe findet Ihr hier: https://www.printables.com/de/model/502882-sterngriff-knauf
At a request from my in-laws who play Mexican Train
You will need two m5 screws ~12-16mm long to attach it. Print in PETG and with as many walls to make the narrow part solid. I sold these parts on Amazon but I don't want to support them anymore. Commercial use is not allowed without…
Inspired by the design of JSK-Studio ( https://www.youtube.com/watch?v=NX5H3UaoFl0 ) I modeled a custom version from scratch with bearing on the Z Axis aswell. What you need aside from the prints: 2x 116mm 8mm Rod 2x 114mm 8mm Rod 2x…
This is a set of Dominoes for use with the Festool Domino. If you know, you know… DF500-relevant standard sizes are included. Here is a link to the OnShape file if that's your thing. Use Precise Wall and Z-Height for accurate fit.…
I designed these based off of the @SteveRowe_181180 version with a much different approach to swapping the nozzles out. The nozzles are inserted through the cap like how a baby bottle works. I printed the cap(s) in PETG upside down and…
Znáte hru domino, v dětství jsem ji hodně hrával s kamarady, nyní si mužete zahrát i vy. Nechtělo se mi ho kupovat a tak sem si ho sám vytvořil...
Hello Makers! New maker here with about 2 months under my plastic belt. This is my first original design created because I wanted to see all my dominos when playing Mexican Train and I could find nothing I liked. My favorite train dominos…
Classic 55 piece domino set with a matching box. Colored markings are achieved by changing the filament mid-print - set your slicer settings accordingly. The marking are surrounded by a rim to achieve flat domino tops. Domino piece…
Multiplication tables as Domino tiles puzzle. Every tile is broken into 2 pieces. Find the right answer for each multiplication and check if the tiles fit together. A storage box for 10 tiles is also available. Print instructions…
You can print as is or use material changes throughout to add some contrast to it. I used a silver-like PLA for the first and last three layers of the pieces. The box-lid should be printed upside down to avoid any supports.
This is a Jig inspired by “Der Holzbastler” to use Domino Dowels without spending a thousand bucks for the Festool machine. The mechanism is perfect for dowels with 22,1 mm width and different thicknesses (at least 6 and 8 mm). I now…
Print2Play: Domino Set with Storage Box Description: This Domino Set includes 28 printed tiles, a storage box, and a matching lid. It’s designed to be a practical, fun, and fully 3D-printable set for playing dominoes. The set can be used…
I found a nice Domino glue applicator on Printables, but it didn't leave a glue surface that I was hoping to have, so I decided to work up a version that left more glue in the mortise. It works pretty well adding a bit of glue to the…
This is the Dom Foot , a little helper for your workshop. If you have a Festool Domino joiner DF500 or maybe even DF700 this might come in handy. Depending on the project you might need to oil or paint pieces before glueing them together.…
For this look start with white . Use a shoe-string or yarn to loop it and tie a bow. Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the MK3 jogs…
This is a new version of Domino. It's very helpfull for people with reduced vision or blind. Everybody can have fun! You can play following the shapes or just count the lines. The “S” is 1. The “circles” are 2. The “triangle” is 3.. and…
This is a center hub piece for the Mexican Train Dominoes game. It has 8 slots for building track off and the center holder for the starting number domino. It is for dominoes that are 1x2 with filleted corners and ¼ inch thick, but it…
A cheap alternative to the discontinued Olight omino dock. You use your own magnetic chargers to make a 4 port charger. Any cheap 4 port usb-a charger will work for this: USB Charger Cube, Wall Charger Plug, AILKIN 4.8A 4-Muti Port USB…
This little travel domino set was a big hit during a recent trip to Disney! I used the two links below as source material, but remixed from there. Print in two colors for awesome contrast. If you are in need of some good filament at a…
A simple and helpful tray design that will accommodate dominoes of various sizes. With just a glance you can quickly assess your whole array of options, and then make the perfect play as you're challenging others in a game of dominoes.
What is it? My family enjoys playing dominos, but when we set our dominos out they are hard to see and keep falling down. How to use it This stand is designed to be stackable and can hold up to 18 dominos. Print instructions Any Infill.…
This space isn't enough for all the things i need to say, that's why i uploaded a pdf with the full description, go to “other files” then download the “FULL DESCRIPTION” .pdf Made with both Nomad Sculpt and Tinkercad, and all the effort…
I recommend printing 7 boards to cover most of the possible game combinations.
Can you fit all eight, unique tetrominoes into the box? There are several solutions to the puzzle! Can you find one? UPDATE: I've added a box and lid with exposed magnets. Just print and then glue in your 6mm x 1.6mm magnets. I printed…
Domino + transform box, 4 trays and 2 manual counters.
We designed this tetromino tile with the exact same dimensions as in the classic Tetris game. Make lots of them in 7 colours to simulate an ongoing game of Tetris on your wall! For more information about Tetris and its 7 tetrominoes (I,…
Bonjour à tous Je vous propose ces pièces de triomino que j'ai édité en m'inspirant du jeux original et de quelques modèles présents sur différents sites. J'ai préparé 3 tailles : petit, moyen et grand. Je n'ai imprimé que les set moyens…
Festool Domino DF500 Dust Extractor Cam Lock Adapter with Twist Lock 25 degree angle allows extractor host to be offset Printed in PETG @ 0.3mm
Yes, this is a Triominos clone, but is better because: There are more pieces because I am treating ordering as distinct I.e., “5-4-1” and “5-1-4” are distinct pieces. It goes to 6! The range is 1 through 6, rather than the boring 0…
🧩 Pentomino 3D The puzzle consists of twelve pentomino pieces, one extra square piece, and a storage box with a sliding lid. Use all 13 pieces to fill the 8 × 8 area of the box. The twelve pentominoes can also form three-dimensional…
Family fun, especially with the bigger 1..9 range. I printed them in PLA white on black using a Bambu X1 Carbon and an AMS although you can pause the print and swap out the filament if your printer does not support multi material…
Another option for Mexican Train / Dominos rack. This one fits 20 tiles. Other players will not be able to tell how many tiles you have left - so keep that in mind when deciding if this fits your game rules.
Accessories to go with your dominoes! Not for playing the regular game, but to make it more fun to set them up and knock them down! Includes a set of 7 steps, a bridge, a ramp and a spinner (5/16" dowel rod required; not included). I'll…
Heckmeck am Bratwurmeck / Pickomino Dice Game Print instructions Everything is printed on 0.15 layer height quality profile on a Prusa Mini. For the stones you need a filament change twice to have a coloured imprint. The imprint is 0.75mm…
Dock for your Festool DF500 Domino. Allows you to have both hands free for cutting mortises in smaller work peices.
A modified version of abekabakoff 's “ Pentomino Calender ”. I changed the font a bit and made the “date” part a separate piece so it can be printed on a non-MMU printer more easily. As the original, the calendar is in German, but can be…
Curved Domino Holder to Conceal Dominoes from Opponents. Optimized for up to 8 Standard or "Spinners" Dominoes Step and Fusion360 Models Included!
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
The original file had a few dominos that were duplicates so this one has all the correct files and they are individual so that you can print them however you want, at whatever scale you want. Dominos in photo were printed in white and…
They are racks for triomino; one is without a name on it, one only with Triomino written on it and four with an additional name on it. If you would like to have a model with another name on it, fell free to contact me.
This model is a rack to hold your dominos when playing. There is also a rack holder to store up to 12 domino racks
In case you're wondering, the dominoes have rounded edges on all sides, but have no issue standing upright. The dimples for the numbers are rounded on the bottom too! A word of caution, I included a design for a storage/travel case, but…
The classic game of dominoes. Board game that is played with 28 rectangular tiles that are placed in turns according to certain rules and in which the winner is whoever places all their tiles first or whoever has the fewest points on them…
Basic domino. I printed With PLA.
Double triangle domino stones. Recommended Print Settings Nozzle: 0.4mm Material: PLA Layer Height: 0.20mm Supports: None Rafts: None Netradiční dominové kameny. Doporučené nastavení tisku Tryska: 0,4 mm Materiál: PLA Tloušťka vrstvy:…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A 3Dprintable pocket version of Pickomino, Regenwormen, Heckmeck with expansion that I made. I used a bambu lab ams to print the tiles with multiple colors. (See the .3mf file with all tiles.) How to print: All parts are printed out of…
Domino Box for domino pieces by @hercanstein Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Infill:** 20% Filament: Spectrum ASA 275 Orange Notes: Ii Used ASA 275 but it can be made in PLA or PETG…
I got home with the new domino and found out that the hose attachment (dust collection required) isn't same as my other Festool tools. grrrr. Didn't want to spend more money for a 3rd party adapter. So, it took several attepts to fine…
Here comes another little weapon against Covid19 lockdown boredom :-) These are DOMINO bricks, big set of 0-0 to 9-9, altogether 55pcs. Printed from PRUSAMENT PLA (Vanilla White, Lipstick Red and Pearl Mouse) The models are scaled up to…
Celebrate your love for the game of dominoes with this customizable 3D printable trophy! This unique model features a domino tile design with customizable nameplate, allowing you to personalize it with your own name or the name of a…
This a 3D-ish replacement/substitution castle for Kingdomino (a fun little table top card game). After assembly, you can fit both king tokens inside (just like the originals). There's also a 40x40mm base tile that the castle seats into.…
Remodélisation d'une boîte de dominos bien usée : Dimensions de la boîte d'origine : 50 x 165 x 35 Dimensions du jeu de dominos : 20,8 x 39,9 x 6 Version 1 (V1) : Imprimée avec support Version 2 (V2) : Imprimée sans support Ce petit…
This upgraded angle plate for the Festool Domino DF500 or DF 700 provides a better stability and rigidity than the factory version. The file JOINT can be printed in TPU to hold the 2 M5 screws. Category: Parts
These are a collection of 12 Pentominoes, which are shapes made from cubes. They could also be called pentacubes. You don't need any additional support structures for these shapes. Use 20% infill. The size of each cube is 17.5 mm. This…
I hate setting up dominoes) So I created a reusable domino! Please note, fantastic customizers for creating STL on my Patreon. https://www.patreon.com/c/PrintInPlace_fun For only 5 USD you can download 4 of my programs "Amazing STL…
This domino holder was made to be the largest it could be while still fitting on the Bambu Carbon print bed. The tracks that hold the dominos are different sizes to account for cheap, poorly manufactured dominos that vary in sizes. These…
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Tiles and case for the domino game. The model is supposed to be printed in two colors with filament change between layers.
My 7 years old daughter designed and print her first model using Thinkercad this weekend. She wanted a stand for when sh
Christmas Pyramid Candle Carousel
Use this domino stand in your next game to keep your dominos organized!
so this is my custom pentomino puzzle, its a fun game for smaller children to do. i scaled the shapes to 99 percent so it has a little wiggle room when they are all on the board, this will make it easier to play so you dont have to force…