PRINTBED SCREAPER 1.0 (HOTBED SCREAPER)
Printable screaper for printbed
Print approx. €0.27–€0.34 excl. taxPreliminary estimate for one variant
- Downloads
- 120
- Likes
- 6
- Rating
- 4
1,434 models
Printable screaper for printbed
Print approx. €0.27–€0.34 excl. taxPreliminary estimate for one variant
Description This arena design is based on a soccer arena in Munich (Germany). This model has three parts: 1. Roof; 2. Arena (without roof); 3. Base plate. 1.+2. are separated prints to reduce the required supports and to easily install…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
Bird nesting house with 3 different looks Timber frame, Bricks and Football. You will need all the common files and a set of one of the designs to make a house This Bird house can be assembled mostly mechanically, only the Rooftop of the…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
The FIFA Worldcup 2022 in Qatar is mere hours away, as I'm uploading the last files of this project. This worldcup is the first of its kind to take place in autumn, when the temperatures in most of the western football watching world…
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant
EN: Print at 100% infill and 0.2mm layer height. Two perimeters are recommended. Swap Instructions: 0,0 - 2,0 mm … WHITE 2,2 - 3,0 mm … YELLOW 3,2 - 4,0 mm … RED 4,0 - 5,0 mm … BLACK CZ: Tiskněte se 100% výplní a výškou vrstvy 0,2mm.…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for PETGSource material: PET
This printer makes good prints, and just begs to be upgraded in the spirit of the original Rep-Rap Clamps might require clean up and some tuning, but when the cover clip on it stays on.
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Print this item to align the 16x15 cm hot bed sticker in the center, then add pieces around it to fill the whole bed. No annoying seams thru the center where most smaller objects will be printed.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Je to pro milovníky fotbalu na vístavku.
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
kupil som pranku z kauflandu a je dost ohybna tak som jej vytlačil vystuhu. binderka 4ks vypln 20% perimeter 2 podpory nie
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
All parts are printed without support, Z=0,30mm. For shooting mehanizm you need 10x standard everyday elastic rubbers. It is constructed that you can replace the elastic if it become weak. Print it with PLA or PETG. I suggest that you…
Let me introduce you this Print in Place Airless Football - Airless American Football It is Original Size model. I have used generic TPU for ball Please, Use support blocker to block unnecessary supports, I have added other print settings…
A 3D model of an american football with the official measurements. I included two versions of the ball: The original one with all seams and the laces and one blank version to be able to create figures by substracting the ball from the…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
I decided that instead of money, the winner of our Fantasy Football league should get a trophy. Naturally, I designed it after the Lombardi. However, since it's a Fantasy League Trophy, I figured I'd name it after the greatest Fantasy…
This Dual Sticker Organizer Box was designed to help organize and store up to 300 World Cup stickers in a simple and practical way. The model includes a box with two compartments and a stand , keeping sticker stacks organized and easy to…
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
Here is a American Football helmet I created from a 3D scan I found of a Riddell helmet. Scale to your needs. I wanted to use it split in half to easily hang on the wall. The face mask was extremely difficult to print. I ended up needing…
I couldn't find a Football Stand matching my preferences. So I designed my own ;-) Matches the original football size (HxLxW 7x12x7 inches / 17.78x30.48x17.78 cm). But even works with smaller sizes. The stand can also be used in asymetric…
Made this remix for a friend who wanted a small resin printed helmet.
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Soccer Ball / Football Keychain This football keychain was designed by my brother and it was used as a kind of demonstration object. In the .stl files there is a version with hole & one without. Have fun & cheers Print Settings Printer…
Couldn't find a soccer shoe keychain so I decided to create it myself. I used an already existing shoe model and added the ring. Use tree supports touching the bed. Category: Accessories
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Simple card display stand for any flat surface (Shelves, Desk, Dresser, etc)
Model of 180mm diameter ball, can be scaled in slicer. Files include: 1 Full ball 1 Hollow ball with 5mm wall thickness
After having designed the football trophy, my boys called for a separate ball. Why not in 2 colors. What can you do when you have only single extruder printer? Split :) Happy printing, sand where necessary.
The OOTBDD (Out Of The Box Direct Drive) was designed to be printed with the sample filament that comes with the stock Voxelab Aquila machines. No extra hardware or tools are required. GCode File (had to zip it for Printables to let me…
The Football Fidget Toy / Spinner Cute little football ready to use for the “Football European championship” beginning today in Germany. It's a print in place part. The ball has Ø40mm. With a bit of oil it can spin really fast and long.…
This is my version of a wall mounted holder for sports balls. Pictured with a size 5 soccer ball but it will fit most balls up to and including a full size basketball. (Update: I've added a second version that has a simpler mounting…
I keep seeing the airless basketball and am not really a basketball fan. Now football is a sport I can get into. I give you the airless football. I added an updated version because I seen a few people say that the ends were printing open.…
ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%
I needed a unique trophy for a fantasy football league that would easily allow adding logos and text. I am a novice so something that didn't require hours of youtube videos to figure out how to edit existing trophies was important. This…
Print specifications: I printed with 0.08mm layer height but I think it will be alright with higher layer height also If the grass is not fitting, try increasing width and depth by 0.25mm, but it should fit firmly as it is
A soccer* ball to do soccer* poses for all you soccer* fans *AKA football
Fantasy Football Trophy - inspired by old sowjet monuments. Super easy to print Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Craftbot PLA WHITE Post-Printing ============= Shiny Finish…
This is a kickoff kicking tee for American football. No support is needed!
A modern football helmet reimagined as a clean, single-color 3D printable model. Designed with bold raised center striping, the signature three-stripe pattern is extruded directly from the shell to create strong depth, shadow, and tactile…
Updated American Football hand for dummy 13 model
This Size 5 Football/Soccer ball stand is perfect for your signed balls. It can also be used to prevent your ball from rolling about when not in use. It uses Minimal filament but still has a reasonably strong structure which can withstand…
Info: The holder is for 1.5 in X 2 in Post-It notes. Fold the Post-It notes into little footballs. Print and Assembly: Any material at 20% infill or more. Any Infill Pattern. No Supports. Print with the pieces standing up as shown in the…
A friend asked for a Rams Helmet, so this is my attempt at doing so. The logo is just a tad undercut into the helmet to make it easier to paint.
EDIT: The correct size of toilet has been uploaded. This trophy is great for fantasy football leagues or for any time you need to let someone know how you really feel! Supports needed for toilet and poop emoji. Print base with letters up…
This is a fun trophy to print out for your fantasy football league loser. Prints all in one. Apply color changes at the correct heights.
There's two versions, "OTB" (Over The Barrel) has the thread around the middle of the silencer and the normal version has the thread at the base. Silencer dimensions: 157mm x 35mm OTB: The barrel hole is 15mm and the thread starts 70mm in…
Ständer zum aufstellen eines Footballs Viel Spaß damit :D stand to set up a football have fun with it: D
PETG 0,3 Draft Infill 25% Supports: Yes 5 perimeters Hanging on 4 screws
its a little small i printed it at 275%
A rough model of the College Football Playoff Trophy. This was made using a combination of the most accurate draft dimensions I was able to find publicly, combined with rough dimensional matching for missing measurements and details. This…
Customizable keychain. You can add your players initials and number. Made this for my girls and they loved it. Just do a color change when the white patches start printing and it will look great. Planning on making their for my daughters…
This is not all of the SEC Teams - as people request the additional teams I will do my best to respond. All gcode files are setup for manual color changes I will fill in the missing teams as they are requested - Enjoy! All gcode files are…
One Version with “American Football” on the holder the other one is without. I have uploaded my 3mf file as well which has the honeycomb infill as the football holder in the picture has.
Easily scalable and multi-purpose sports ball themed holder stands. Makes a great little gift for a sports fan. Choose from either 15mm or 10mm groove cut variants and from the following sports: ⚽ Football (Soccer) 🏀 Basketball ⚾ Baseball…
A futuristic ball holder inspired by wormhole geometry and radial symmetry. This sculptural stand grips sports balls (basketball, soccer, baseball, golf, volleyball) with elegance and stability, making it ideal for display or storage. The…
Kids broke the kicking tee that came with their football, so I made this model so I could print them another one. I printed in PLA+ to see how well it would hold up. If it breaks soon I will print it in a hard TPU.
Print this if you want to make some soccer / football cookies!
Real Madrid Football Club Logo
I printed a lootbug for my friend (from the game “Deep Rock Galactic”), but the model was ported from the game and it didn't came out very well, so i made a better printable version for the fellow dwarfs out there!
Fun practice print for IDEX printers.
A trophy to celebrate a championship W.
Old fashioned fun is the best when the kids get bored inside the home. It's also something they can build and play with. They may win you in Mario kart, but with this, you may have a chance. Fun for all the family Update: Added Players…
id : se1008152a2 size : 128X128X186mm files : 3 pieces : 4 maximum size of the component : 128X128X128mm total print time : 12h:36m raft : yes support : no Applicable Bulb type : tBulb B Instructions : 1.lampshade infill 100% , Best…
Idea of airless footbal ball
Printed without top an bottom layers and vase mode (I recommend using a 0.8 mm nozzle)
The full version of this trophy is available on Cults and Etsy. That model does not require any purchased fittings and includes a place to put winner nameplates. This modular trophy was designed to be printed and assembled in one of three…
I stole the idea of a fantasy football league loser trophy made by @adam_1550. I found similar models and reconstruced to my liking and for multi-color printing. I also made the text model seperate to allow for repositioning in the event…
Woot! Flexy football in celebration of the American SuperbOwl holiday. Great for centerpiece or maybe to hold something? Kind of pointless but what the heck. Have fun! Experimenting with making all the things flexy. Thanks @TheNewHobbyist…
I provide you with two versions. One small (10cm x 10cm) and a big one (20cm x 20cm) 10x10 20x20 The Model is seperated into parts so you can easy choose another color and the parts are more easy to print. Update 21.11.2023 Emblem and…
Model of the College Football Playoff National Championship Trophy . I printed this in anticipation of the upcoming college football video game so that my friends and I have something to play for. I printed the outer pieces with a brim…
The Ducks were a team that was all about fun - Crazy color uniforms and the most fun mascot around so have fun printing Easy to print and easy to scale - g-code is set up for Manuel color change.
This product contains the 3D model in OBJ file format only. The OBJ file contains the high-detail geometry mesh. It does not include embedded colors, textures, or materials (MTL), providing a versatile base for custom finishing, painting…
Eat your popcorn for your Rise of the Beasts viewing from your Optimus Primal Popcorn Bucket! Instructions are in the images. The main helmet is assembled with 5 pieces. There are optional pieces (7 and 8) for those who want to paint the…
A blank shirt so you can use it for whatever you want
This is a simple football goal model in two pieces. Other models just didn't look enough like real football goals or needed glue for assembly. Designed for 0.4mm nozzle. No supports needed. I printed the frame in grey and the net in…
For people who like this sport :D (On Tinkercad - don't know creator)
As I feared that the hotbed cable may break over time due to constant sharp bending I searched for a solution and ended up here: https://www.thingiverse.com/thing:4318284. I really liked the chain design but not that I would have to…
Maybe inspired by the World Cup going on I decided to make a small mini table football game. I made my game reds against blues but you can make yours the way you like, featuring your team and biggest rival, like in my case Benfica vs…
Wall mount for football ball. It has been printed on a PTGE-CF from GST3D. ¡¡¡¡¡¡ If you are going to print in PLA I recommend 3 walls and 25% infill !!!!!! walls: 2 - 3 Layer: 0.2 - 0,28 infill: 15% - 25% No supports
Support your favourite team with a nice keychain! Print it with multimaterial or by layer to obtain a nice final color effect! You can find the .3mf files ready for multimaterial printing, just choose your favourite spools of colors.…
I printed @EDnation's Super Bowl Lombardi Trophy to be a first place trophy in my Fantasy Football League. I wanted an FFL logo instead of the NFL logo, so I remixed the design of the included NFL plate. Remixed in Tinkercad. Get the rest…
Welcome to a printer friendly version of this CNC machined model , which in itself is a remix of NeedItMakeIt's linear rail upgrade project . The one you see in the pictures above is the 12H version, printed out of PA-CF, 0.4 nozzle,…
Hello sports and music fans, combine your passion for both by showing off your favorite sport with one of these smooth and elegantly curved knobs. For the single piece set each has its own 🌀 wormhole styled base suited to its sport. Easy…
This is a "simple" design of the footbridge for Goathland-Hogsmeade, thought to be as easy as possible to print (i tried anyway). I know it's not the best looking but my printer is an FDM and i need to make it a bit rough to print ok. The…
Hi I design a smal lamp with the Pittsburgh Steelers Logo Print the Logo in clear or withe PLA, the last 7 layers in yellow and the letters last 3 layers in black. You need: Black, Clear/ withe and Yellow Pla LED white Stripes ( I…
Check the profile to download the full set of Christmas decorations. Subscribe to not miss out the next one! Sports balls for your Christmas tree. 3 balls are included in this set - Soccer/Football, Basketball, Baseball.
Important! Ensure files are oriented correctly, they should look correct when viewed from below the build plate. This may require mirroring the parts. setting the coordinates to 0, 0, 0, should center them properly. A flat version of…
These targets use 30x10x5mm magnets to attach to a goal frame. There's a small, medium, large, and corner target. (Your mileage may vary on the corner piece, depending on the dimensions and shape of your goal.) Print these on the short…
Football Cake Topper :) Easy Print :) Diameter = ca. 100 mm Happy Printing ;)
A trophy with a football/soccer ball head. SImple and modern with space for a tag plate
Zápich na dort (cake punch) - Fotbalista (footballer), gcode nastaven na kvalitu - quality 0.3 mm PLA. Velikost - dimension 115 x 169 x 2 mm. Doba tisku - time print 33 min. Pro vzhled je nápis obrácen k bedu. For appearance, the…
I printed from PETG - 4 perimeters 25% filling
This model is compatible with the lego system.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Tried my hand at creating a simple kicking tee for a football. Printed it on the end with supports for the round back part. 6 walls, PLA+. Feedback appreciated. Blender file included for those who would like to modify the design further.…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
County people get ready! Sporty people get ready! competitive people get ready! City people Watch out or Get Trampled! will you be country or sporty or competitive or scared and City? This football will have your family laughing, playing…