318 models
Will fit 4mm (~1/8") diameter paracords. Eyelet diameter is 7mm (little over ¼"). Obviously not suitable for safety relevant applications. Changelog 2025-02-23 v4 added files for 0.4mm nozzle 2022-03-15 v3 complete redesign with smaller…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the ultimate solution for your camping and outdoor needs – the Super Strong 3D Printable Camping Pulley! Designed for durability and versatility, this pulley is perfect for a variety of tasks, from setting up tents to creating…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
This Airtag holder includes a cutout channel for a 3mm diameter piece of Paracord. Print Instructions Pause the print at 5.0mm and add a dab of glue to each channel - and firmly squeeze in each end of the cord. You might need to use the…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This model allows you to “whip” paracord using a flame to a fine point that will pass through nearly any hole where the paracord fits. It supports a variety of “550” paracord thicknesses from about 3.0mm to about 3.4mm. Handles all of the…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
Added filets to the inside corners for a small amount of added strength and removed the hole to hold the cord. Printed in PETg with 0.30 layer height.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
This is a simple, printable paracord tensioner based on a similar design that's usually sold and made from anodized aluminum. I haven't tested yet to see how much load it can support, but should be plenty strong for camping applications…
This is a remix of @IvoSlanina's great Rope Winder model. I took some material out of the centre so it prints faster, using 40% less filament. It's still very strong. I also increased the hole diameters from 4mm to 5.5mm because I…
A batch of small paracord beads. Resize it as needed in slicer program. ATM all have a 4mm center hole. Completely drawn with onShape. Post your makes if you like them. Bead1 similar to @AcEjbc bead but smaller and the center diameter is…
Reel is a small spool for military style paracord (550 cord), easily prints in under an hour with no supports. Designed for use with 5/32" (4mm) cordage but has some adaptability for other types, though you may need to increase or…
Super Strong for tough tasks 5mm holes for standard 4mm paracord / ropes I plan to make 2 paracord handles attached with 4 clips for my bag. There are just so many possibilities with it, use for whatever you want. 😎 // Print with no…
Precision ingenieur'ed paracord lock that does not require additional parts and prints easy and reliably. Will fit 4mm diameter paracords and is very compact in size. Obviously not suitable for safety relevant applications. Assembly…
Heyho :) Some time ago I designed some simple beads for a friends pocket knife. I also use these with my outdoor knives. The design is nothing special but you have some choice and it serves its purpose :) You can print the parts very well…
I designed this paracord winder with added holes in the handle to attach to your backpack when hiking or camping, so you always have spare paracord when needed. If you like this model, check out my Rope Tensioner, Rope Hook and Webbing…
A simple filament sample swatch that is easy to browse and keep organized. The loop is easy to open and close, and when your sample swatch collection grows too big for your loop you can easily use a longer paracord. Setting up and using…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
This zipper pull print can add a custom decorative flair to an otherwise boring bag, backpack, or jacket. However, it's use is not limited to just zipper pulls. It can also be used as a: Keychain Pull chain finial Luggage charm Low-effort…
Tweaked some details and made tighter for paracord. It's a ittle hard to get the cord in but it will fit even with knot. Loop isn't necessary, simple knot on cord will do.
Simple tensioner for a tent guyline or paracord. I have tested the uploaded 3MF/STL files with 550 paracord (~4 mm diameter) as well as narrow tent guyline (~2 mm diameter) and it holds well. Should you need a different size, the source…
The most simplest hook for paracord. Just wrap paracord around and it's done! Perfect for tarps or other things. Self locking Want to send a tip? Paypal: https://paypal.me/cubikspot BTC: bc1qp7c9nllsetqf73zu76wrwxcrrks4ctpp04rnpe ETH:…
Following the example set by nemokeine the holes in these have been enlarged from 3mm to 4mm for an easier time getting the 95 paracord through armourcraft's models. 95 paracord is thinner than the more widely know 550 paracord. Shown…
Update 24/02/2024: Updated the no handle version to include a reinforcement rib as testing showed it was susceptible to breaking if enough stress was applied. Old version has been moved to the Legacy folder. Update 11/02/2024: Added a…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** The cool paracord tensioner that @SD-3D created…
Modeled after the Q Sling Devil, you use this in conjunction with some Paracord to attach slings (or other items) to your firearm. Works with airsoft, real firearms, or even… chairs? To tie the open ends, I used 18in of paracord for each,…
The Jig is adjustable in length, the scale does not indicate the absolute length of the finished bracelets, but is only for reproducibility. The box and the top part with the sled are printed from PLA. Nozzle 0.4mm; 0.3mm layer height for…
cord tensioner.1 = grey one cord tensioner.2 = orange one Layer height: 0.2mm Wall thickness: 1mm Wall line count: 2 Infill: 100% Skirt/brim/raft: No Support: No
Simple paracord bead. Print with supports.
Hello there, I created a Paracord Jig Upgraded to everyone, who needs a jig for making paracord bracelets, etc. :-) I printed a great model of "old" Paracord Jig by FrankBer from Thingiverse and I using it for one year. I had two small…
Overview A simple retractable and locking spool for holding 20m of 3mm paracord with built-in storage on the back for hanging hooks/clips to use on the line. I would love to see any makes so please post some pics, you get prusameters too!…
2022/10/23 Update: Added prototype versions for 150ft, 200ft, and 250ft lengths of paracord. I have not yet tested them. 2021/04/28 Update: I have adapted the Yarn Spooler to work with these spools:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
Multiple versions, also with all letters of english alphabet. Extra version for single paracord strand. I use lighter and pliers to fuse both ends of paracord and hide connection inside opening at bottom. No supports needed, print in…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I tried a few paracord winders to organize my paracord, but none worked as I had…
Created this a while ago, and works great for adding paracord to your hoodies, sweatpants, shorts, etc. Makes it much easier to thread through the thread channels. Also makes it easier to thread paracord braids. A paracord needle cost…
Molle MultiFix : for the well-known molle system, this offers a lot of individual application options. You can use it with paracord, bungee cord (rubber band) or any rope you have on hand. Simply thread the paracord and you can attach…
Very strong automatic rope tensioner (tested with 28kg for the 4mm paracord version without any damage with PLA material). You can print it directly in place, without any support. Four versions are available -> 3mm, 4mm (paracord), 6mm…
Simple hook that attaches securely to paracord. Tested a hook printed in PLA with 100% infill with a 40lb bag of salt. It held up fine. I wouldn't trust this for climbing or anything but for most camping purposes this will be plenty…
This is for making a Money Fist using Paracord and 1.25 inch steel balls. Category: Tool Holders & Boxes
Bring your paracord lanyard Game to the next level with these nice paracord beads they work with a single line of paracord or if you scale them by 150% they work great with a double line of paracord.
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
Darth Vader head as a bead for a paracord keychain. I used the “Flaschenhelm” model instead of other Darth Vader heads since it filled some gaps and made the small model more robust. The stl was made via TinkerCad, which unfortunately…
This is a simple hook for Paracord bracelets. It feels so much more comfortable then buckles. I printed it in TPU with 3 walls and 100% infill. It is very sturdy and quick to print.
Paracord spool for 50 ft +/- of paracord. Holes are used to anchor the cord to the winder so when packed it doesn't come unwound. Can also be used to fasten objects to the winder to create a a survival tool kit. This is a remix of…
Paracord Watch Strap This quick print can turn your watch into an expedition ready survival tool. Replace your boring leather or fabric strap with this durable and multipurpose paracord strap. Instructions Print two of the adapter pieces…
Tactical Paracord Dispenser/Rewinder. NOW YOU CAN GO BACK IF YOU PULL TOO MUCH. Assembly on gif image. You'll need: 9x M4x30 DIN912 screws 1x M4x20 (or 18mm) 1x M4x5 (optional if you want to have something on end of crank - I did) You'll…
This is the best rope and paracord tensioner i designed , this model does not need support to print and its design for 550 paracord But You CAN scale it down to your rope size in you slicer of choice . enjoy
With this model you can adjust, loosen and lock paracord-type ropes or other types of ropes. By performing a simple movement the rope is released, and in the opposite direction it is tightened. I have also created a variation of the model…
Print in TPU or other flexible. No supports required, 0.2mm layers or whatever you like. A knot might fit but designed for a flare-melted end on the paracord.
Remix to allow for 550 paracord to fit better
I was searching for a solid tensioner for my clothesline in the basement room but didn't find a thing i like. So i created one witch meets my expectations. This little thing is very easy to print and tensions ropes and lines for camping,…
I thought this would be a good addition to the CSGO knife collection. There are 2 holes modeled in to wrap the paracord or string. Once finished and painted this should be an astounding knife! Category: Props
Changelog Paracordlock 2022-07-03 v2.1 increased holding force for cords with smooth surface 2022-07-02 v2.0 initial public release Tool 2022-07-02 v0.5 initial public release Paracordlock Will fit ø2mm/1.9mm diameter paracords. Obviously…
Original weaving loom by “Just Why Design”. Printed parts: 1x body 1x carriage 2x buckle_hook_mount 2x buckle_hook Optional parts: 3x thingy 4x shaft_mount You will need: 10x nut M4 10x screw M4x16 1x nut M6 1x screw M6x12 2x shaft 5x80mm…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've paired a cam action cord tensioner (4mm paracord) with my Action Carabiner.…
Strong Cord Tensioner [Cam Action, 4mm paracord] Remix of "Strong and Compact Carabiner + Cord Tensioner [Cam Action, 4mm paracord]" by User @BuildX In my application of this tool, I would rather use another carabiner or rope to anchor…
Quick rope tie Update: somebody pointed out that a loop on the end is not necessary: a simple knot is sufficient 😊 I needed something to quickly bundle stuff like rope, cables, webbing etc. So I made this simple and fast rope tensioner…
I had some extra 6001 bearings, so I figured I would try designing some medium duty pulleys. I sized the v-roller to fit 550 cord, and mine works flawlessly. I used 6001 bearings just because I had them on hand, but I also found a 10 pk…
Ball shaped keychain looking like an object made of paracord. The ball is hollow. Diameter 42 mm (1.65 inches). This is an easy print. The ball comes in two parts which must be glued together. There is a 4 mm hole to fix a string. Print…
Just throw the rope around a tree and loop it around the anchor hook. It can hold a surprising amount of weight. I also put some hooks on the paracord to hang things on.
Sleek everyday carry (EDC) phone stand designed to fit in/on your pocket, car key ring, bag, and even in your car glove box. -This version is intended to accommodate a 19/32 inch (15 mm) split keyring OR 550 paracord. -Functions as a…
This paracord tensioner is designed to provide enhanced strength, making it an ideal choice for a variety of applications where durability is key. Whether you're setting up a tent, creating outdoor gear, or working on any project that…
Print in PLA for crafting or fashion…if you can print or cast in metal that would be pretty cool too.
Simple guying line spooler. I made it for my amateur radio station. You may also use it for kite or as a general paracord spooler. Print instructions Thin version is 5mm, thick is 7mm. I printed this from PET-G.
3d Print you own paracord lanyard, Just add a M3 6mm bolt and a mini carabina Blog post - https://wp.me/pKY3w-D5
Crow Skull / Raven Skull Paracord Bead Add a dark, tactical touch to your EDC setup with this Crow / Raven Skull Paracord Bead . Inspired by the distinctive shape of a corvid skull, this design features a pronounced curved beak, recessed…
Give your paracord projects a striking, Old West flair with this revolver cylinder-inspired bead! Carefully modeled to resemble a classic six-chamber cylinder, this 3D-printable bead is easy to produce and perfect for adding an…
A simple, adjustable jig designed to aid in the making of paracord bracelets and projects. Length can be adjusted by use of the screw knob piece in the middle. It requires six (6) M4x20 screws: two (2) to attach each end piece and two (2)…
beads meant to fit standard 550 paracord, the holes are 6mm so no need to take the insides out of the cord to make it fit
Make your own cool bracelet just print out one of these, and buy some parachord from the dollar store.
I wanted a way to keep some duct tape and paracord handy while not taking too much space in my EDC backpack. The Flat Duct Tape and Paracord Roll™ is born! Contains ~ 2 to 3 meters of paracord (if you wrap it tightly). Fits multiple…
Pace beads (or ranger beads) are a useful tool for tracking distance traveled while you're hiking or orienteering. Print 13 of 'em & thread 'em onto a doubled length of paracord, using a bit of dental floss to pull the cord thru. HOW TO…
You will now also find the knife split into 2 parts for easier printing in smaller building spaces. I finished the knife by wrapping the handgrip with paracord.
Added a paracord lug to the blank dust cap model PrusaSlicer PROJECT file included along with a naked STL See upstream project for details I also added three tiny paracord lug models you can put in your “gallery” for slicer remixing
I remixed original design because of too tight holes. This version fits to paracord 550 wit the hiden knot. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 35 How I Designed This Category: Accessories
Inspired by old cast pulleys this is a modular pulley system intended to be decorative, stackable, and for use with paracord. A 8x22x7 mm skate bearing should press fit into the center of the pulleys. 5/16" or 8mm bolts are used to hold…
I needed something to keep my paracord and throw bag organized and untangled out in-the-field. This is used by Ham Radio guys to toss a line up into a tree to pull up a wire antenna. Most of the cord winder models out there are for 100…
A gadget designed to add an accessory hook anywhere on a 550 paracord line. To use take a bight anywhere in the line, pass it through the “eyes” and hook the bight around the “tongue” of the hook(er). Hang anything non life-preserving off…
may be used with rdzsonde, meshtastic and others while hiking, to fix it securely to the vest/belt/backpack.
Simple Paracord Toggle…easy and fast printing, without supports. It's optimized for paracord - dimensions: Length: 2.5 cm Diameter: 0.8 cm Holes diameter: 0.45 cm
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATE Oct 25, 2023] Load tested to 63.6 lbs (28.9 kg), at which point the cam…
A way to store paracord neatly in the smallest pocket of your backpack. The holes can be used with a small carabiner to attach the card to the outside of the backpack. A second file with deeper and narrower cuts is available. Some…
Begleri beads for 550 with optional m6 nuts as weights. This is a set of begleri beads to be used with 550 paracord. There are two sizes; small (for smaller hands) and large. Of each model there's a ribbed and a smooth version. And of…
I found a few of these bomb beads for paracord, but they just didn't print nicely or work well as zipper pulls/toggles. After a few goes at designing , I cam up with something that worked, looked good, and printed easy. I like that it…
I put 4 of these hooks on a paracord rope with an anchor hook to easily tighten it around a tree for hanging my gear.
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
Need a compact option to make your own paracord wristband? This kit comes with small and strong buckles with attachments to hold the buckles in place while you weave your wristband. Recommended Print Settings: 3 walls 0.6 nozzle or…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This is the safest way to hang a lamp, a carbon filter or whatever u want into…
This is a tool to help make paracord bracelets. It was made to be taken apart if you like making bracelets on the go. Once you know the size of the wrist you can mark the proper position and transition from the bracelet between the tool…
This buckle is a convenient way to make sure your never caught without a screwdriver, or rope for that matter. The buckle stores a hex bit of your choosing. This buckle is comparable in size to a standard 5/8'' buckle that you would…
This bracelet is a derivative of a Trailblazer Weave ( https://www.youtube.com/watch?v=-26a5M9umeU) with the center cord replaced with these, but they could be used for whatever. DM if you are looking for specific guidance, but I figured…
A open thimble to be use with a snap hook Use with the clamp from Bodo https://www.printables.com/model/147380-quick-paracord-rope-clamp-4mm-thimble
These clips can be used to add paracord straps to any bag with 1 inch molle straps. Designed to have 4 passes of 550 paracord through it. No supports. 0.2 resolution. 50% or better infill. PLA+ or better filament. There are instructions…
A compact paracord winder designed to hold 15 - 10 meters of 4 mm paracord neatly and securely. Keeps your cord untangled and easy to deploy when you need it. Includes a simple tightening feature that lets you secure the cord after…
Three variations on a 6mm paracord bead with a large knurl / “spiky” pattern: “rev0.1” is the plain round version “rev0.2” is elongated “rev0.25” is elongated and twisted 90° from top-to-bottom “rev0.2” is my personal favorite for…
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
![#0064 Strong and Compact Carabiner + Cord Tensioner [Cam Action, 4mm paracord]](https://media.printables.com/media/prints/461204/images/3785617_41f239c4-c418-4964-8678-70def4743d20/20230423_165614.jpg)
![Strong Cord Tensioner [Cam Action for paracord]](https://media.printables.com/media/prints/631949/images/5004009_1eee6d50-5ac9-4753-a4f3-bcde7cf8e62b_a26d0bbf-17df-46d0-9878-2c6d33c5336c/pxl_20231030_215731085portrait.jpg)
![#0089 Rugged D Carabiner with Cam Action Cord Tensioner [4mm paracord]](https://media.printables.com/media/prints/552601/images/4625918_e7cdb34b-cff3-47e4-b665-06346ee61185/20230905_174748.jpg)
