29 models
Story My friend, who is a paragliding pilot too, wanted to make a simple C-Bars for better steering by C risers of his paraglider. There are some designs on the internet, but instead of verification other designs if they fits, it is…
PLEASE READ THE WHOLE DESCRIPTION INCLUDING THE EDITS IN THE END Original post I have been using a "PET bottle" chasecam for the last 4 years made of a standard PET bottle and a Gopro surf mount. It was working well but the drag was never…
I needed a packing board for my reserve - so I drew one. It fits the build plate of a Prusa i3 MK4 exactly Things to consider: This is much lighter than a wooden board. You can use an anti-slip mat or a weight to reduce the board from…
This paragliding Brakeballs (Balls Handles) uses M3 screws and nuts to hold the two pieces together. Thanks, Benjamin! Materials needed: 2x M3, 16mm flat head screw / 20mm screw 2x M3 nut If the screws stick out just a little bit, a…
To be clipped into the maillon to hold the lines in place. Fits 4mm triangular maillons that are outside 36x40mm. The Insert is 28 and 11mm wide top an bottom (gap dimensions to fit in). Best to print in something outdoor resilient like…
Obal na Poke 4 lite s krytem pro bezpečný transport. Model jsem vytvořil pro připevnění na pultík pro paragliding, ale určitě se hodí i například na cestování. Zatím jsem netestoval ve vzduchu ale čtečka v obalu drží hodně pevně. Nahoře i…
This design is installable without the need to untie the brake handle and does not damage your lines but the installation is a bit tricky. you will need two M3x14mm hexagon socket head cap screws and two M3 nuts. to insert the nuts I used…
The Insta360 Go2 is a great camera for paragliding, as it doesn't take up much space. GoPro style camera mounts are prone to getting tangled with lines. And if that happens in flight or during launch, there's a higher risk for accidents.…
To avoid paraglinding hanger to be catched by the gopro mount when taking off. Use a classic crew instead of gopro's one. Designed for a supair helmet. Put thick double face tape beneath it. Protection pour éviter que les suspentes se…
Since I made them, I would never fly back with standard risers. Better feeling. With this kit, no need to dismount the brake line. Need to be screwed with Hamond plastic screws: Ref → Hammond Self Tapping Screw (1591TS100BK) Can be found…
Camera helmet mount for gopro snag free requires…
I've designed these balls to make handling the brakes on longer flights easier for my fingers. They work well for me and you don't need to open the knots to mount them. Just screw the parts over the triangle/loop on the upper side of the…
Hello, Here I propose my holder for the MipBip from Mipfly Can be assembled on risers of 2.2mm thickness, maximum 30mm width. I recommend to print in PETG BOM: - x4 M3x10 socket head screws - x4 M3 nuts (Normally, if you have a Prusa, you…
Compass holder for those cheap little plastic ball compasses. Print in TPU and slab some Velcro on the bottom.
This simple controller consists of two linear potentiometers that can simulate the brakes of a paraglider in a simulator like the one made by Evan Burrows : https://evan-burrows.itch.io/paragliding-sim hardware : 1x Arduino Leonardo 1x…
TPU-printed camera mount for Supair Pilot helmets, for the Insta360 X4 Air via a Insta360 quick release interface: https://store.insta360.com/it/product/x5-quick-release-mount The aerodynamic profile is designed to prevent paragliding…
I printed mine in PETG with supports around the holes. You can loop a little piece of TPU filament through the holes as shown on the second image, to secure it against falling out of the case and remove it if you're waiting for your…
REMIX All holes are now 5 mm + added hex hole to hold a m5 nut - gopro style. The ramp is 75mm wide, so it needs arround 80 mm long screw. Best to print it on the side, for minimum support needs. Print Settings Printer: GEEETech i3 pro B…
Category: Sport & Outdoors
Rigid brake handle for paraglider controls, I made it to apply on the C-lines controls on my glider, developed to be as more light, durable and confortable as possible.
Dieses leichte Hakenmesser ist für Standard-Rasierklingen (44 mm x 22 mm) ausgelegt und soll sicher in der Hand liegen. The razorblades are supposed to get cut into half to fit inside the tool. (44 mm x 22 mm into 44 mm x 11 mm) Pause the…
Here are two very handy tools if you measure your paraglider lines yourself, for example using we-measure.io . 1. Weighted Target The first tool is a pulley combined with a target that you can attach to a table or any other flat surface.…
I designed a mounting plate for the straps of the Supair Pilot helmet (which likely fits other models as well). It allows you to attach a headset/PTT system like this one: https://it.aliexpress.com/item/1005004944662478.html I modified…
This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…
Description I upgraded my Icaro Nerv 1.0 to a newer 2.0. Unfortunetelly I was not able to use my old visors due to the interface change. So I designed this little adapter. The adapter sits quite tight, tight enough that it will stay in…
Viwoods AiPaper C - Slide case for paragliding cockpit - prints fine in ABS
Camera helmet mount for gopro snag free requires…
