74 models
Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets. Variants: Version 1 (solid, 1 mm…
13APR2023 - updated with new connectors with better tolerance to make it easier to remove and reconfigure the setups. First set of connectors were really tight tolerances and virtually impossible to remove without breaking the divider…
Blanking plates for a 10" Rack for when you want to cover up part of 1U.
This is a model of the Predator Shuriken as seen in the AVPs and the Predator. It comes in two versions - xxx_-_shuriken which is the simply closed shuriken. But it also comes in the open state where it has partially foldable blades (for…
This model is compatible with the lego system.
english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…
A sword scabbard/frog for kids' swords. Made for a tapered sword, the top of the hole measures ~56mm x 15mm, tapered down to ~44mm x 15mm over 63mm. V1 works. The clips can do their job, but they won't hold up to kids pulling them out by…
Meta’s new Quest Pro include these “partial light blockers” for a more “immersive experience” They attach magnetically and do exactly what their name suggests… but when they’re not in use… they just lay on my desk. The other day, their…
Double-breasted dovetail joint partially embedded, teaching aid for joiner and carpentry in secondary schools. Oboustrabbý rybinový svlak částečně zapuštěný, výuková pomůcka pro obory truhlář a tesař středních škol.
Overview This is a comprehensive library of functional metric fasteners designed specifically for 3D printing. This collection provides ready-to-print M6 through M20 bolts and matching nuts, covering the most common mechanical needs for…
A smaller clearance test with only 0.1mm and 0.15mm. Allowing you to fine tune your printer faster.
Normally I would print it with 40%, PLA material and at least 0.15mm quality.
This was made to help to protect your GoPro Hero10 Bones from crashes. Print it on TPU for best results. Don't forget to read the license. It's NOT for commercial use! Be adviced! Category: Hobby
Mostly taken from jimerb's original file: https://www.printables.com/model/256225-grass-protection-ring-for-rotary-sprinkler-head Grass Protection Ring for Rotary Sprinkler Head - Remixed with partial parametric dimensions Prevents Grass…
I cut the slots to clear drag chain bracket
EDIT: I would no longer recommend the inserts provided here, I would recommend cloakedwayne's official inserts here: Better CF Tube Mounting the xy joints are still useful if you want to keep using the stock gantry, and don't want pin…
Riding my Xiaomi Mijia M365 electric scooter for longer than a few minutes quickly made my thumb a bit numb. While I am fully aware that this scooter has cruise control, I prefer having full control of the throttle at all times, so I…
This is a TFT file created by Steve Nofs of the Facebook group that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD. Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic…
Need Gridfinity in your Series 3 US General 56" top drawers? These four baseplates are sized for a snug, no-wiggle fit in the top two drawers of the Harbor Freight US General toolbox. Print the ones you need, drop them in place, and enjoy…
Another modification to reinforce good 3dsets models)
Its a remix of https://www.printables.com/model/271645-pocket-screwdriver-kit for printing without gluing the handle. It can be printed in place, and if you have OCD you have the tiny little part to glue, but doesn't affect structural…
My 2nd hand 2010 Kia Venga came with a broken hinge on the partial shelf. The local dealer was expensive so i designed my own… (in mm) ((should work with any settings & nozzle equal or smaller than 0,6)) I printed in pla with 0.6 nozzle…
I linked some of the parts and added modifiers to close magnet holes. Parts 14 - Front 2 linked 3 linked 4 linked 5 linked triangle (2-1) round (2-3-2) 5er (3-2) Assembly The Tile 14 can be done with: 14-front 2 times the usual A Tile 1…
I 3d Scan of my old broken PS4 DualShock 4's L2 trigger, D-pad, and top main body. I have not printed it yet, but please do let me know if you do. I cleaned up the main body as best I could before I stopped caring, about 3 hours in. The…
Third length vented dust cover for use with the raised AMS bracket file that Bambu Lab supplies for the P1P found here https://wiki.bambulab.com/en/p1/manual/p1p-upgrades. The standoffs can be glued onto the lid and are sized for 8x3…
This is a remix of the Tiny T-Rex made by Doodle_Monkey: http://www.thingiverse.com/thing:614067 Because of the heavy head of the original the T-Rex would tilt over to the front. I made a partially hollow version that will keep it's…
This is only a bigger cover for this Model: https://www.thingiverse.com/thing:3556235
This is a short but still easily printable version of the original pocket screwdriver.
I really like the hex nut sorter by jonafriendj (see the original model in the remix list), but I thought the cup parts could be re-designed to print faster and use less filament. The designs listed here provide substantial improvements…
I recently purchased a Razer BlackWidow V4 X keyboard (not PRO) which I am extremely pleased with. However, since I am not an advanced user of all additional functions, I do not plan to use the 6 macro keys located on the left edge of the…
Remixed parts from the Insert/Organiser designed for Nemesis Lockdown (incl. Kickstarter Stretch Goals)!
Here's my attempt at building a Pen Plotter with automatic tool changes and alignment. It's built with many parts taken from old 3D printers. I've shared extensive build details in this Hackaday Post as well as some demos on Youtube.…
[Some of the photos show the two-drawer version.] The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial…
The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial dividers allow you to configure in multiple ways to…
This is a partial remix of OBA @OBA_97489 's EXCELLENT Sunlu spool adapter. I reduced the inner diameter to 45mm and added a replacement spool holder that has an Anycubic style “twist-on” mount for a snug but free fit. To keep the spool…
My floor lamp was causing a pretty glaring reflection when watching TV. This fixes that issue, while not looking too terrible. I'm not sure how common the dimensions are… Mine measured about 11.25in diameter across the top, and I didn't…
During a partial solar eclipse (or the partial phases before and after a total solar eclipse) certain phenomena can be observed using this tool. Print this shape and hold it in direct sunshine where the shadow is cast onto the ground or…
This is one of several lamp shades I designed . All of them use the same mounting mechanism. This shade is for a “normal” LED bulb and I printed the top layers in transparent filament, so that more light shines on the ceiling. It blocks…
This is a replacement part for the Italocremona Plastic City set. They have been out of production for about 40 years now and can be hard to find. However, they seem to have held up well and my children enjoy playing with them as much as…
This item is compatible with both sizes No. 10 and No. 8, as well as the No. 8 outfit. You will need a 8-32 by 1-inch socket head cap screw for each gear. Gear List: 49-65 and 86-88 Updated 03.07.2025: 80-85 Updated 06.11.2025 89 - 110
The factory must grow! A partially moving model of an inserter from the game Factorio. It can rotate and the arm can move up and down on a hinge.
If your toughbook is missing it's port cover, you are left with an ugly ridge. This model fixes that by simply screwing into the cover's original place. It makes it look (at least in my opinion) a lot more elegant if there was simply a…
THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…
The moment before the raccoon tail becomes a hummingbird and in a much more printable pose... shock + tiny hands up.
This is a replacement part for the Italocremona Plastic City set. They have been out of production for about 40 years now and can be hard to find. However, they seem to have held up well and my children enjoy playing with them as much as…
This is a partially 3d printed plane that is designed from a plane my cousin showed me sometime last year. To understand what I was doing I reccommend watching my video about the plane… As for printing reccommendations I would go with the…
This model is a Raspberry Pi 4 case that also enables the use of a Kingston SSD as a OctoPrint HDD/Server via USB 3.0. Fixture points for left hand side of an Ender 5 Pro. If you like this model and wish to show appreciation please…
Partial insert option for Spirit Island base game. I kept the bottom insert and one of the top inserts. There are boxes for spirit presence, fear token, blight, fear cards/scenario reminder cards, and energy. All the boxes have 1mm and…
I printed in black PLA and used this with the Havsris cord set: https://www.ikea.com/us/en/p/havsris-cord-set-with-switch-black-60490053/#content The cut-away is so it sits flush against the wall when hung on the wall by the cord. In my…
Love the model, my sons wanted the scabbard mirrored so they can wear a sword on each hip. Quickly mirrored the geometry, and thought I'd upload for anyone else wanting a quick download of the mirrored version. Thanks to JK for the model!
4x4 Gridfinity magnet base, partial borders 5x2 magnets, these are used to fill areas on the sides.
HARDWARE REQUIRED Use heat pressed insert and M3 screw to secure the regulation knob to the air restrictor Materials Printed in PLA with gasket in TPU. Support recommended for the curve of the hull. Other Freecad files available for…
You will need to purchase or cut to size 8mm thick panels and purchase suitable magnets. I bought the following for use in this project: 4x 8mm thick clear acrylic panels - cut to size 600mm x 600mm from eBay (cheaper sources exist…
Paused before the full pattern was applied to the model
Turn the light on and off. While keeping the toddler from smacking switches on/off with objects.
Snap fit Enclosure for toxic gas detection and oxygen monitoring, while providing ease of operation and reduced installation cost. This enclosure can accommodate PCB, Sensors and Power unit. The upper cutouts on the top of the cover is…
Recommended print settings: Material: PLA Layer Height: 0.20 or less Infill % : 15 Supports: No Print Orientation: Default Assembly: slide both hexagon shapes over the shaft, then slide the ring clips on to retain the pieces.
Ive tried making printed drawers before and always ran into the same issues: They take forever if you want more than just a couple drawers Unless they're printed in vase mode they use a ton of material if they are made in vase mode then…
The main and outer parts of the radiator grille. Main segment and corner. The distance between the segments should be approximately 4 cm vertically. The antennae from the main element may not match, as they vary along the entire radiator.
I built a knife block, but then we found more steak knives hiding in a different drawer, so I had to make it bigger (and I was printing in petg wood, so I increased the knife width parameter from 2mm to 2.2mm) Original description: We…
We needed a knife block to sit in the drawer to organise our steak knives, and prevent them from hurting people. Partially paremetric - allows tuning of wall thickness, steak knife blade thickness and handle diameter. F3d, STEP and STLs…
This is used when a plate similar to one like this is used: https://www.mcmaster.com/71695K76/ This was used for an undersink garbage disposal / dishwasher combo switch. I kept shutting off the dishwasher on accident instead of running…
This is a clean, no-fuss boarder for a 2 gang outlet for 1" thick Owens Corning 703 (OC703) rigid fiberglass panels—perfect for dialing in your home recording studio without overcomplicating the build. If you’re chasing tighter mixes,…
I needed a replacement wall caddy for the ones installed in the house, as the ones that came with the fan are flimsy and too easily broken. My fan is "Airborne" brand, but the same fan is apparently also marketed under other brand names…
This is a simple model made to clip on to the round cover of the wall or ceiling duct vent. In my case the diameter of that cover was 6.75", but the model should be fairly flexible to accommodate slight variations in sizes. I have two…
This is a small block for ages 4 & up . DISCLAIMER: I BEAR ZERO RESPONSIBILITY FOR ANY INJURY. THIS BLOCK IS DESIGNED TO AVOID SHARP EDGES, BUT PLEASE USE WITH ADULT SUPERVISION ONLY!
This replacement part allows for the repair of broken plastic rails in the area where the drawer front panel is attached. To secure the replacement parts, I used 3.5 x 35 mm wood screws. The best approach is to detach the front panels…
This is a 10-peg tamper for the Blated Cap & Press Core Series capsule filling machine. It can be used with either the 100 hole or 400 hole models. NOTE: This is for sizes 000 and size 00. Other models and sizes are coming very shortly!…
THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…
[Some of the photos show the two-drawer version.] The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial…
The Packout drawers have a nominal interior dimension of 16" wide by 12" deep. The long Milwaukee dividers run front-to-back, so max tool length is 12" when using dividers. These partial dividers allow you to configure in multiple ways to…
I recently purchased a Razer BlackWidow V4 X keyboard (not PRO) which I am extremely pleased with. However, since I am not an advanced user of all additional functions, I do not plan to use the 6 macro keys located on the left edge of the…
english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…
EDIT: I would no longer recommend the inserts provided here, I would recommend cloakedwayne's official inserts here: Better CF Tube Mounting the xy joints are still useful if you want to keep using the stock gantry, and don't want pin…
![[partially deprecated] CARBON TIME cf x beam parts for voron 2.4](https://media.printables.com/media/prints/813096/images/6285656_be049c92-0559-4229-9a8a-1324d631045c_e1591564-131b-44cf-999f-1c9532482314/20240320_155358.jpg)
