Search results: pax

Sort order

518 models

P
PrintablesHenne

IKEA Pax Kleiderstangenhalter [Clothes rod holder]

Das ist ein Ersatzteil für den IKEA Pax. Es ersetzt die Kleiderstangenhalterung die gern mal ausbricht ;) Druckt es in PETG oder einem anderen flexiblem Matierial - der Schnappmechanismus muss sich etwas bewegen können. Es handelt sich um…

Downloads
1,278
Likes
137
Rating
4.92
P
PrintablesJason Dean

IKEA PAX KOMPLEMENT SHELF PIN

Replacement Komplement Shelf Pin/Bracket for PAX cabinets Print Settings Printer Brand: Creality Printer: Ender 6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .16 Infill: 15% Filament: Hatchbox PLA Notes: Printed on Ender…

Downloads
1,121
Likes
124
Rating
5
P
PrintablesGabe

PAX 3 - Mini Funnel + Tamper Kit

I wanted a small, portable funnel I could throw in a little bag with my PAX 3. I went through many iterations and landed on this. There are two versions: Regular and Magnets Just print as-oriented without supports. I recommend printing…

Downloads
1,103
Likes
119
Rating
5
P
PrintablesGabe

PAX 3 Charging Stand

This was inspired/remixed from: https://www.thingiverse.com/thing:5181752 Printing: The models were designed to print without any supports. The files provided are already in the correct print orientation. Assembly: It prints in two parts…

Downloads
1,088
Likes
130
Rating
4.88
P
Printablesschmidtflo

IKEA PAX Side Hook Bar

Add a hanger for small items on the otherwise unused side of your IKEA Pax cabinet! Fits perfectly between the rear and middle row of holes of Pax cabinets. Needs two or four screws, the same as used for the big clothes rail. It's…

Downloads
681
Likes
221
Rating
5
P
PrintablesRobert Givens

Remix Case for LILYGO Paxcounter LoRa V2.1 ESP32, Tinygs, Meshtastic

Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.

Downloads
672
Likes
66
Rating
5
P
Printablesnilson_fx

PAX / Mini Brick Maker

This 3 Part design allows you to easily pack and load herb bricks to your Pax vaporizer of choice. The tolerances are forgiving a lot whilst still producing some quality bricks. The brick height depends on the amount of herb material…

Downloads
663
Likes
87
Rating
4.33

PAX Puck Press

A handy device for pressing bricks of ground flower for your PAX 2/3/Plus vaporizer. There's an original version from the vape manufacturer for the same purpose, but that one sucks: it's extremely brittle and breaks after not that many…

Downloads
639
Likes
67
Rating
4.86
P
PrintablesHampej

Ikea Pax Sidehole Cover

Printer: Prusa Mini+ Material: Add:north E-PLA Layer Height: 0.2mm Nozzle: 0.4mm Printed in vase mode. Made with Tinkercad by me.

Downloads
623
Likes
194
Rating
5
P
PrintablesFernando Pena

Pax 2/3/Mini Vape Charger-Case Combo + Storage

This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…

Downloads
484
Likes
61
Rating
4.83
P
PrintablesFinn

Ikea Door screwless Handle/Knob for Platsa, Pax, Enhet, Kallax,... 16,5mm

A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG

Downloads
476
Likes
68
Rating
5
P
PrintablesBeaconman

IKEA Pax Shelf Support Pin

Improved version of the shelf bracket pins found elsewhere. This will insert in the IKEA 32mm shelving system without tearing out the holes. they work great and I might just keep them permanently in place recommend 0.15mm layer height, 3…

Downloads
437
Likes
92
Rating
5
P

IKEA Pax Shelf 30cm

Shelf for IKEA PAX wardrobe mounted with screws that come with the system. Print with PLA, 2-3 walls, 15% infill At least 256 x 256 bed required. Print with brim/mouse ears if possible to prevent lifting of the corners.

Downloads
427
Likes
238
Rating
0
P
Printablesmortenhauan

Drawer Organizer for IKEA PAX Komplement 100x58

Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…

Downloads
395
Likes
77
Rating
0
P
PrintablesLukasM

Cover for IKEA PAX holes

The covers can simply be printed in the color of the cabinet using any filament (preferably PLA). The covers have a diameter of ø4.9mm in the model, which worked best for me. If desired, the diameter can easily be adjusted in the Fusion…

Downloads
370
Likes
117
Rating
5
P
PrintablesNoratlas

Hanger Rail Support for IKEA PAX – Ø22 mm Tube OR Oval D30 × 15 mm

Compatible with IKEA PAX wardrobe systems Designed for 22 mm diameter hanger rails Strong and lightweight 3D-printed construction Easy installation with standard screws Ideal for repairs, replacements, or custom setups An alternative…

Downloads
364
Likes
262
Rating
0
P
Printablesmaggoh

HP ProDesk 600 G3 mini mount compatible for ikea pax (32mm grid)

HP ProDesk 600 G3 mini mount compatible for mount into an IKEA pax cabinet hardware needed: 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (for example from IKEA)

Downloads
354
Likes
22
Rating
0
P
PrintablesPRINTER

Spool holder with bearing for IKEA BESTA PAX

Spool holder with bearing for IKEA BESTA PAX Holder with bearing for IKEA BESTA and PAX for various spools. I use it myself for the 1 kg prusament spools from prusa. Partlist: 1x DIN 625 - bearing - 6201 - 2Z 1x ISO 7379 - shoulder screw…

Downloads
346
Likes
158
Rating
5
P
Printablescedasy

IKEA PAX slide door stop

Print options (CURA) 2wall Alternate extra wall 25% infill connected infill PLA+ is perfect for me No support

Downloads
345
Likes
33
Rating
5
P
Printablesdr.dentz

PAX RÄCKA Curtain Rail Mount

I designed a rail holder for the IKEA PAX closet so you can use a curtain instead of sliding doors. It's intended for the RÄCKA rail with 16mm and 19mm diameter. I also encluded stoppers / end caps. Print instructions Prints without…

Downloads
337
Likes
25
Rating
5
P
PrintablesMarcK

USB - Kabelhalterung für IKEA - PAX

USB - Kabelhalterung für IKEA - PAX - Für IKEA PAX-Türen 500mm Breite / Absatz 335 / Halterung (335/2) = 167.5 Halterungen: 01 - USB-Kabel - Halterung - 8x 5mm Breite - L167.5 10 - USB-Kabel - Halterung - 8x 6mm Breite - L167.5…

Downloads
332
Likes
42
Rating
5

IKEA PAX Shelf Support (Screwing)

Reinforced shelf supports for shelves. The shelf support is attached to the shelf with four 3.5x20 wood screws. No additional support structure required. ABS is recommended as printing material.

Downloads
320
Likes
59
Rating
5
P
PrintablesWiischke

Gridfinity Baseplate for Ikea Pax Komplement

Nothing more to add. You can modify the size of the cornerpieces easily in the 3mf file, if you have any problems fitting these into your pax komplement. Have fun and keep printing

Downloads
318
Likes
59
Rating
5
P
PrintablesMaciek

Ikea PAX Hooks

2 sizes of hooks (30 and 45mm length of the hanging place) with screw plug for 5mm hole (ikea pax). 3x16 or 3x20 wood screw required. Notebook in the photo weights 6kg :) Print tips supports for screw plug

Downloads
308
Likes
49
Rating
5
P
PrintablesBort_Macklin

Pax Pamir 2nd Edition Insert/Organizer

This is an insert/Organizer for Pax Pamir 2nd edition. I was somewhat unhappy with other designs I had found so I made this one from scratch. It accommodates sleeved cards (I used Ultra-Pro Matte, on the thicker side). Works with…

Downloads
302
Likes
42
Rating
5

Ikea Pax Komplement Drawer Divider

This is a drawer divider made for the 100cm x 35cm Ikea Pax Komplement mesh drawer (product code 902.572.94). Attaches to the drawer using zipties and can be placed in any position to achieve the desired compartment width.

Downloads
285
Likes
68
Rating
0
P

Schellen 10 bis 50 mm in 2 mm Stufung für Spax-Schraube

Schellen 10 bis 50 mm in 2 mm Stufung für Spax-Schraube Kann für viele Reparaturen verwendet werden. Materialwahl je nach Verwendungszweck Spax-Schraube 3 x 15 bzw. 3 x 20 mm Kein Floß, kein Support. Schichthöhe 0,2 mm bis 0,3 mm…

Downloads
282
Likes
52
Rating
5
P
PrintablesJirkaBaa

Ikea Pax

ikea pax držák police

Downloads
281
Likes
38
Rating
5
P
PrintablesMarioy0

Nail holder for Ikea Pax

This is a nail holder for the Ikea Pax backwall. The distance is set to be exactly in the middle of the groove.

Downloads
277
Likes
30
Rating
5
P
Printablesrelei

IKEA Pax side baskets (depth 35 cm)

Side baskets for IKEA Pax (depth 35 cm)

Downloads
274
Likes
117
Rating
4
P
PrintablesTitoVerano

Ikea Pax Sleeve Stopper

Hey Guys, I got the problem, that the sleeves of our jackets and shirts stuck in the sliding door of our Ikea Pax wardrobe. So I Designed the sleevestopper ;) You need two 5mm metal cylinders. Use a little bit glue to fix them in the…

Downloads
266
Likes
107
Rating
4.77
P
PrintablesJakob127

IKEA PAX Filament Spool Storage

Overview A filament storage System I designed to have easy access and a great overview of my filament, while having it neatly stored in my existing PAX. Stores about 33 Spools, depending on their size. Materials Uses 6 KOMPLEMENT Clothes…

Downloads
259
Likes
79
Rating
4.9
P
Printablesinnercube

window retainer/window stopper for PAX windows

Window stopper for PAX windows. Enables ventilation without the window slamming shut. But please remember to remove the stopper before closing the window. Otherwise the lever will mercilessly destroy the stopper. You can use the opening…

Downloads
254
Likes
39
Rating
0
P
Printablesepaquette06

Ikea Pax Hook

Hey! this ikea pax hook should fit whichever size pax you have, as long as it's got those tiny holes on the sides. It is perfect for hanging keys or other similar things. If you decide to print it, please dont forget to leave a like!

Downloads
253
Likes
66
Rating
5
P
Printablesaroo

AR IKEA PAX sliding door handle SET.

Today I am sharing with you a handle for IKEA PAX sliding wardrobe doors, mounted with one screw in a place already prepared at the factory on the inside of the door.. Status of this project: 2024-06-26 First release, printed and after…

Downloads
240
Likes
55
Rating
5
P
PrintablesBernd

Replacement part for sliding door compatible to IKEA PAX 124341

Ersatzteil für Schiebetür kompatibel zu IKEA PAX 124341

Downloads
236
Likes
10
Rating
5
P
PrintablesSirOwl

IKEA PAX Belt rack

Beltrack for 5 belts, Prints without supports, Toolless installation

Downloads
232
Likes
68
Rating
5
P
Printableszuperbuuworks

Transformers ONE Orion Pax Cosplay Helmet

Orion Pax from Transformers ONE inspired this helmet. The profile size has been made to fit a small person, so you will need to resize the parts if you require a bigger print that fits a large person. Huge prints will require the two…

Downloads
231
Likes
65
Rating
0
P

Shelf Hole Cover Plugs / Filler (e.g. IKEA METOD, PAX, BILLY, IVAR, BESTA, PLATSA)

Summary Conceal unused shelf holes in cabinets and bookcases for a cleaner, more refined look – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring compatibility…

Downloads
228
Likes
47
Rating
5
P
PrintablesAlgot Fransson

IKEA PAX shelf pin/bracket/carrier/holder/support

Designed for IKEA PAX (wardrobe system) Easy print with no support Screwless Strong support due to angle with big contact surface compared to original part Print on the side with support for both cylinders for a durable part

Downloads
228
Likes
38
Rating
5
P
PrintablesMichael

Spacer for fixing an IKEA PAX to a wall with skirting board

When you are building an IKEA Pax wardrobe, you should fix it to the wall. IKEA provides brackets for that, but if you have a skirting board and cannot push the wardrobe to be flush with the wall, you need a spacer. This is one. If you…

Downloads
227
Likes
32
Rating
5

Ikea Pax Cable Clip

Simple cable clip which can be fit into standard pin holes in Ikea Pax closet. It can easily fit power cables from LED light (OVERSIDAN), but probably also different kind of cables will fit :) I attached step file in case somebody want to…

Downloads
220
Likes
61
Rating
4
P
Printableszoltanf

Ikea Pax hinges drilling template

This is a simple template I created to mark the wholes for hinges for Ikea Pax system. You will need also a 35mm cutter for the big whole, the smaller wholes are 5mm, go slow because the thickness of the fronts is only 18mm (ask me how I…

Downloads
219
Likes
29
Rating
5
P
PrintablesRandumbPrints

Ikea Pax - Screwless Spool Holder

Let me tell you a story! A few weeks ago I became obsessed with this 3D printer “enclosure” I saw on the Prusa 3D Printing facebook group. I just had to built it, following the posters design almost identically with a few little of my own…

Downloads
209
Likes
50
Rating
4
P

Shelf Hole clip-in Hook (e.g. IKEA METOD, PAX, BILLY, IVAR, BESTA, PLATSA)

Summary Make perfect use of the shelf holes in your furniture body and create new possibilities! – particularly effective in open furniture without doors. Compatibility Tested on IKEA furniture as well as other brands, ensuring…

Downloads
206
Likes
64
Rating
5
P
PrintablesPRINTER

Angle bracket for IKEA BESTA PAX

Angle bracket for IKEA BESTA PAX Angle bracket for IKEA BESTA and PAX to attach a counter top. I use it myself for the counter top in my IKEA PAX for my MINI+. IKEA PAX partlist: 2x screw (100325) IKEA BESTA partlist: 2x screw (113287)…

Downloads
201
Likes
45
Rating
0
P
PrintablesZax

1/10 2 Gallon Rotopax gas can

material - ABS layer - 0,15 extruder temp - 220 °c bed temp - 90 °C support - only 10 mm brim printing time - 2:15 h Print instructions Category: R/C Vehicles How I Designed This First thing I have made in DesignSpark Mechanical 2.0…

Downloads
197
Likes
37
Rating
0
P
PrintablesCessfpv

Gancho IKEA PAX

Impreso con una Ender 3. Filamento utilizado: PLA plus de SUNLU. Relleno del 50%. Distancia entre agujeros de 32mm.

Downloads
188
Likes
43
Rating
5
P
Printablesflazer

IKEA PAX: Rail holder replacement

IKEA PAX: Rail holder replacement After several years, the rail holder in our closet broke. Whether it was due to old age or the amount of clothes will forever remain a mystery, though the latter is most likely. After a long search for…

Downloads
184
Likes
91
Rating
0
P
PrintablesTeddyminator

Weidmüller STRIPAX Replacement Cable Stop

I've broken my cable stop on the Weidmüller STRIPAX and designed this replacement. There are 2 versions: -Universal to clip in any place on the pliers rails. -10 and 15 mm are my most used lenght. Cliped all the way back on the rails. If…

Downloads
182
Likes
20
Rating
5
P
PrintablesChris Enders

Improved IKEA Pax Cam Lock Cover

Improved IKEA Pax Cam Lock Cover Use case: Cover up this ugly cam locks on your expensive pax. There used to be this kind of covers back in the day at least with my billy 20 years ago. Settings: This model is designed to be printable…

Downloads
181
Likes
34
Rating
5
P
PrintablesBoomRMX

IKEA PAX Hook

A simple hook for the ikea komplement clothes rail

Downloads
179
Likes
59
Rating
5
P
PrintablesR1CDM
Downloads
178
Likes
19
Rating
5
P
PrintablesPombay

IKEA PAX Drawer Divider/ Organizer

As the organisers for the IKEA Pax wardrobe drawers either leave unused space or are too expensive, I just created this organizer set. Material used for the walls is 5mm MDF 130mm high. Printed with PLA+ 4 outer walls 25% infill

Downloads
171
Likes
70
Rating
5
P
Printablesmikhart

PAX Clothes Rack Mount

Original part broke, so designed a new one. There was already a design of the original part, but since I wasn't sure whether the flap that retains the rack tube would brake inserting it, I made a rotated one (thanks for the inspiration…

Downloads
170
Likes
36
Rating
5
P
PrintablesBob Root

Squarp Hapax Stand - Synth Stand

This is a stand design for the Squarp Hapax. You'll need to print two of them. The cutout with the holes is so you can mount a divider of wood etc. if you wish to do so. I added a cross beam if you want to print and use that.

Downloads
169
Likes
16
Rating
0
P
PrintablesJonas

Coat / Valet Hanger for IKEA PAX system

This is a coat hanger which can be mounted to an IKEA Pax wardrobe. The design is a copy of the original "IKEA Pax KOMPLEMENT Valent Hanger" which can be bought from IKEA. I changed the design of the original one so that it is shorter,…

Downloads
169
Likes
38
Rating
5
P
PrintablesAndré Goldmann

IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe frames

The 3D model "IKEA KOMPLEMENT Shelf Hook for all PAX Wardrobe Frames" is a detailed and accurately scaled replica of the original KOMPLEMENT shelf hook designed specifically for use in all IKEA PAX wardrobe frames. This model provides a…

Downloads
168
Likes
18
Rating
4.67
P
Printablestur_bo_des_ign

Ikea Pax Handle with threaded insert - Ikea Pax Griff mit Gewindeseinsatz

In den Griff werden mithilfe eines Lötkolben zwei Gewindeeinsätze eingebracht. Two threaded inserts are mounted into the handle with the help of a soldering iron.

Downloads
166
Likes
28
Rating
5
P
PrintablesThomas G

IKEA PAX holder for Skadis board

This IKEA Skadis mount fits into a IKEA PAX wardrobe. I wanted a screwless model. In order to cope with the weight, I used 3 holes per base. (I did not do any load test). I used the following settings for printing on my 0.4mm nozzle…

Downloads
162
Likes
48
Rating
5
P
PrintablesBaubusiukas

Pax Pamir 2nd ed insert

My game blocks just would not fit in the prints I found on Thingiverse. Made block box walls thinner, removed the separator in the center to fit my blocks. Added spacer rings at the bottom of the coin holder to make metal coins more…

Downloads
162
Likes
10
Rating
0

Ikea pax handle template / alignment tool

A quick print to help you perfectly line-up the holes for an ikea pax closet door. The model friction fits on the door, then you can mark the 2 holes. 100% infill No supports 0.2mm layer height No brim

Downloads
161
Likes
12
Rating
5
P
PrintablesPRINTER

Grid line for IKEA PAX

Grid line for IKEA PAX Grid line to expand the inner holes of an IKEA PAX. Distance of the grid holes is 25 mm. Partlist: 2x ISO 4762 - cap screw - M3 x 40 2x ISO 10511 - self locking nut - M3 38x ISO 4032 - nut - M6 IKEA PAX partlist: 6x…

Downloads
157
Likes
59
Rating
5
P
Printablesmariospinaci

Box for Ikea komplement drawer for pax

Useful space-saving boxes to keep your komplement drawer tidy. The models are divided into two groups A and B. Inside an Ikea Komplement drawer you can insert two lines for model A and one line for model B. For each model A and B there…

Downloads
152
Likes
31
Rating
0
P
Printableshdurdle

IKEA PAX ÖVERSIDAN LED Clip

We needed to mount the översidan LED strip to a wardrobe with a top lip that prevented using the standard mounting hardware. This is a very simple screw-in clip mount for the LED strip. I used a MK4 with the Input Shaper 0.20mm STRUCTURAL…

Downloads
149
Likes
19
Rating
5
P
PrintablesZax

1/10 2 Gallon Rotopax gas can ver. 2

Remix for easier printing. Print instructions Unassociated tags: Gas can Category: R/C Vehicles

Downloads
146
Likes
32
Rating
0
P
PrintablesFernando Pena

Herb Box for Pax Vaporizer Case [Check Description for the Case Link]

This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…

Downloads
146
Likes
19
Rating
0
P
PrintablesMotolsky

Ikea pax pin hook

Hook for holes in ikea pax

Downloads
145
Likes
31
Rating
4.2
P
PrintablesSylvain M.

Rotopax Holder rc 1/10 for Crawler

Airline Schienen mit Querstreben um Kanister oder sonstiges zu befestigen

Downloads
143
Likes
28
Rating
0
P
PrintablesSchorschMaster

Rugged box for Einhell Impaxxo nut set and bit adapter

Since the Impaxxo doesn't come with a box for the nuts, I added a inlay for the rugged box. Printed all with PLA+ from Sunlu, works very well.

Downloads
137
Likes
35
Rating
5
P
PrintablesSkyGuy

Ikea Pax Sliding Door Pull

My Ikea Pax cabinet with glass sliding doors is installed flush against a wall on the right hand side, making it hard to open and even harder to fully close tight. So I designed this snap on pull. It fits tight and secure without needing…

Downloads
136
Likes
26
Rating
5
P
Printablesvidision

1/10 scale RotopaX 1 Gallon Fuel Can

I printed the cap and mount at 0.3mm line width just to squeeze out a little more quality. The cap fit tightly enough that I didn't bother even adding glue to keep it in place. I also printed the mount as oriented with slim tree supports.…

Downloads
135
Likes
23
Rating
5
P
PrintablesCinigua

Bosch Sortimo L-Boxx mount for IKEA PAX

This mount allows you to store Sortimo Bosch L-Boxxes within an IKEA PAX. You can use the original holes within the PAX to fix the sliders. For a proper mount, you need 4 screws to hold one L-BOXX. I used the following parts: IKEA PAX…

Downloads
135
Likes
22
Rating
0
P
PrintablesMotoriley

ROTOPAX Mount

RotoPax mount for their gas and fluid cans. Two models. One is designed to be attached to a surface using two #8 wood screws. The other uses two 5/16" bolts. Both use a 2" long 5/16" bolt in the handle with a captured nut. Print in PETG…

Downloads
135
Likes
12
Rating
0
P
PrintablesC Fink

PAX 3 - Mini Funnel, Scoop, & Tamper Kit

This is a small kit with everything needed to enjoy your Pax on the go; a small scoop, tamper, and funnel held in the oven and it's holder base with 3x2mm magnets. I really like the fantastic model that @Gabe_233641 posted, just did not…

Downloads
135
Likes
15
Rating
5
P
PrintablesChris West

Paxman PAX 3 Case

A lightweight case for a PAX 3 vaporizer. The cap is a very light friction fit. The main purpose of this case is to prevent the bottom door from being nudged in transit (in a pocket or bag). Doing so could dump your herbs out, which can…

Downloads
133
Likes
16
Rating
0
P
PrintablesMokkisjeva

Screwless mount for "IKEA PAX Side Hook Bar"

Added SW part file for easy changes if it should not fit.

Downloads
128
Likes
26
Rating
5
P
PrintablesRamon Gutierrez

Boxes for IKEA PAX Closet Drawer

Here is a set with it of 53 cm x 15cm. You can print the 3 boxes and stick them together. It fits more perfectly as a sock organizer for your Ikea closet drawer. For the perfect Fit - just print 2x Big Box and 1x Small Box. After That you…

Downloads
125
Likes
27
Rating
0

Ikea pax rod wardrobe holder

Just add a 20mm rod. Lenght should be 10 millimeters less than inner size of corpus Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 40% Filament: Smartfill ABS…

Downloads
122
Likes
14
Rating
0
P
PrintablesAndre

IKEA PAX door handle

IKEA PAX door handle, universal handle for Ikea wardrobe doors. We can't make decision what we want for handle for IKEA PAX Grimo doors so create this handle for temporary use… UPDATE (14/11/2024) : I decided to make baby handle because…

Downloads
121
Likes
16
Rating
5
P
PrintablesPapaPlintus

Pax Mini Charging Stand

Remix of the angled top to fit a Pax mini better.

Downloads
121
Likes
12
Rating
0
P
Printables3dprints4life

Modern minimalistic Doorknob for IKEA PAX Wardrobe, Kabinet, Drawer 21 x 26 mm / IKEA Pax Knopf

EN This modern doorknob will fit to any furniture. Two versions: I uploaded two models: Model “knob_threaded_inserts.stl” If you have threaded inserts print the file "knob_threaded_inserts.stl". In order to use M4 screws you will first…

Downloads
118
Likes
16
Rating
5
P

Ikea Pax roll replacement for wardobe door

Replacement for broken door rolls. Printed in PETG and 0.1mm Layer heiht. It may need to be slightly scaled because of different printers.

Downloads
117
Likes
9
Rating
0
P
PrintablesBashbear

Gridfinity Weidmüller Stripax

3x5x5 Gridfinity Holder for Weidmüller Stripax.

Downloads
117
Likes
17
Rating
3
P
PrintablesMetatron

PAX PLUS 14mm Water Pipe Adapter

Use this model for a bong with a 14mm hole. To be printed with TPU! No rafts no supports required.

Downloads
116
Likes
10
Rating
0
P
PrintablesFranko3d

Ultimate PAX 3 Scooper and Packer

Printer brand: Anet Printer: AM8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15% Filament brand: Prusament Filament material: PETG

Downloads
115
Likes
19
Rating
5
P
PrintablesSilas

Griff Spax 4x50

Der Griff kann mit 2 4x50 Spax Schrauben befestigt werden.

Downloads
115
Likes
5
Rating
0
P
PrintablesKoprov

Pax 3 / Plus Aroma Eliminating Case

This is a very simple case (an etui) for the Pax vaporizer. It eliminates the aroma associated with vaping, for a more pleasant experience. Two different models for the top part are available: 0 tolerance and one with 0.2 mm clearance on…

Downloads
113
Likes
9
Rating
4.33
P
Printablesmaggoh

TP-Link TL-SG108 Network Switch mount compatible for ikea pax (32mm grid)

TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)

Downloads
113
Likes
25
Rating
0
P
PrintablesJonas

Coat / Valet Hanger for IKEA PAX system

This is a coat hanger which can be mounted to an IKEA Pax wardrobe. The design is inspired by the original IKEA product “IKEA Pax KOMPLEMENT Valent Hanger”. I changed the design of the original one so that it is shorter and has only two…

Downloads
111
Likes
25
Rating
0
P
PrintablesDieSchatten

Ikea cabinet Pax hook / Pax Schrank Haken

This hook should fit any 5 mm cabinet hole. I did print it with PLA, 0,12 mm layer hight, 100% infill and no support. I did hang some weights (6 kg)on it and it seems to have a firm grip and could hold even more. I did add a V2 for easy…

Downloads
111
Likes
21
Rating
5
P
PrintablesVaclav Hornak

Pax Renaissance 2nd edition insert

Insert for Pax Renaissance 2nd edition. Fits sleeved cards including square cards and metal coins. I used BoardGame Insert Toolkit by MysteryDough to design it in OpenSCAD. Print on 0.2 layer, no supports needed. For smaller printers like…

Downloads
109
Likes
12
Rating
0
P
Printablesgreenbigfrog

Ikea PAX Shelf mount

IKEA and PAX are simply used to describe the products these are supposed to be used in conjunction with and have no relationship with this product. The boards, Komplement, for PAX in 50x58 have been sold out and unavailable at my ikea for…

Downloads
108
Likes
23
Rating
0
P
PrintablesJoepy84

Pax 2/3 Kit Case

Printed on the Bambu Lab X1C Petg 10 hours print time

Downloads
106
Likes
22
Rating
5
P
PrintablesMarco Maker

IKEA PAX50 Gridfinity Inlay

This is a Gridfinity system for an IKEA PAX wardrobe. It fits into the KOMPLEMENT drawer 50x58 cm. ! Some of the print files are up to 225mm in size. They require a correspondingly large print bed. On the other hand, you have to divide…

Downloads
105
Likes
12
Rating
5
P
PrintablesArtem

Ikea pax: Hanging rail support replacement

Ikea pax: Hanging rail support replacement A hanging rail support replacement for ikea pax. Consider printing it on the side for a better rigidity. Happy printing :)

Downloads
105
Likes
79
Rating
5
P
PrintablesPatrykLach

Ikea PAX sliding door stoper

Created because original part broke after couple of years of usage. Mine is printed with Fiberlogy PCTG and works greate, printed with 4 perimeters on, with 40% infill. Designed to be printed on 0.2 layer height! After printing you will…

Downloads
104
Likes
6
Rating
0
P
PrintablesVogMan

Orc - Vogland Stompaxe - Ogphart – 28mm Fantasy Miniature (Presupported + Unsupported)

Be afeared, tis Ogphart Bonebiter, a member of the elite Stompaxe Infantry of the Vogland Orcs. Printed on: Piocreate Halot X1 - Once again, the Halot X1 handled every wart, wrinkle, and weapon detail beautifully 🗡 Presupported for easy…

Downloads
102
Likes
15
Rating
0
P
PrintablesRandumbPrints

Ikea Pax - Screwless Filament Rack

Let me tell you a story! A few weeks ago I became obsessed with this 3D printer “enclosure” I saw on the Prusa 3D Printing facebook group. I just had to built it, following the posters design almost identically with a few little of my own…

Downloads
102
Likes
34
Rating
0
P
PrintablesSteDP

Pax side hole cap

Description A cap (similar to the Variera cap offered by IKEA) that you can use to hide the unused holes on your IKEA Pax to improve the overall final look of your wardrobe. You can fit around 200 on a Prusa Mini+ plate. Print…

Downloads
102
Likes
18
Rating
0