3,908 models
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
This hook is made for pegboard with CC 12mm and has a diameter of 3,9mm. for example Biltema's pegboard. This hook is perfect for hanging spanners, for example And this one is designed not to use screws
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
While optimizing the placement of instruments on the pegboard, the original clips broke frequently. I created a version with enhanced spring strength and was pleased with their survivability. The original model can be found here…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
I found that the majority of pegboard components I've found online are aimed at 3/16" diameter holes, but my pegboard is closer to ¼" - which means although these smaller designs fit, they tend to be very loose - and fall off easily…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
I am adding some pegboards to my workshop area and I realized I needed some standoffs to give them consistent space off of my walls. What's more, the mounting screws I have were just a bit too small to work through the holes of the board…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
A simple pegboard mount for a 10oz Hammer. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous tools to leave hanging always want to move toward the wall, and not away from…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
A simple pegboard mount for a 16oz Rubber Mallet - or any other thick-headed tool with a < 1" shaft and symmetric geometry. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
Another caliper holder for Elfa pegboard. You need (!) to print one pair of Elfa module clips
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
A simple pegboard mount for a Measuring Tape, with a clip no wider than ¾". Since this peg has to stay connected to the pegboard when clipping/unclipping the Tape, which is a friction-hold, it's particularly important that the pegs are a…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
little bit broken model, but in slicer wokrs fine printed on default works well, i use honeycomb infill .
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
After running into this pegboard system: https://www.printables.com/model/249871-sys-peglock-locking-pegboard-system/files I had to create some new variations in cad to hold some of my woodworking tools. So I decided to make a holder for…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
🔧 Custom 3D‑Printed Peg Hooks & Tool Holders 🔧 🖨 Easy to print on most 3D printers 💪 Stronger than other designs while using less material 🎯 Simple, practical, and perfect for organizing your garage or workshop ✅ Designed with efficiency…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Bottle holder for Layerneer 4 oz bottles for 1'' pegboards. Print instructions Supports: Yes Resolution: 0.3mm Infill: 20% Notes: Printed it upright, with supports. If you like what I'm doing… … consider buying me a coffee or joining my…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Print standing tall with supports. I painted the numbers with a white sharpie on my black petg print for better legibility. For drill bits with the diameter of 2mm, 3mm, 4mm, 4,5mm, 5mm, 5,5mm, 6mm, 6,5mm 7mm, 7,5mm, 8mm, 9mm, 10mm and…
Print approx. €3.85–€4.70 excl. taxPreliminary estimate for one variant
The spacing of the pegboard was similar so it worked out pretty well. There are 4 sizes in case you want to cover the entire case.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
Easy print EIBOS 3D Filament Vacuum Pump holder for Elfa pegboard. One pair of Elfa Module clips https://www.prusaprinters.org/prints/60471 is required to install on a pegboard.
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
I am adding some pegboards to my workshop area, and I'd like them to be good and level. To that end, I figured it'd be best to find an easy way to attach a spirit level to the board while I work to get it mounted to the wall. I designed a…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
The pen and pencil holder is connected to the pegboard with 1/4 inch pins that slip into the pegboard. It provides a convenient location to store and find your writing utensils in the shop. This unit is more substantial than the one I…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
English version : Hi everyone, I've made this little print to avoid to trash Ducros/Fuchs (here in France but maybe other name in different country) Pepper or Spices boxes and use it as tool holder. After buying my skadis, I've try to do…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant
I had tried printing two pegboard games and they both turned into rats nests. I decided to make my own, a bit simpler and optimized for 3D printing. This is my second model and second time using OpenSCAD, so it's pretty rough. But, it…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
I made this holder exclusively for my crimping tool. Please use the following model "hook one row" for the hook. 私が所有している圧着工具専用のホルダーを作ってみました。フックは以下のモデルの「hook one row」を使って下さい。…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
all parts is printed from PETG on default 0,2 quality settings in slicer.
Tired of being limited to IKEA’s fixed SKÅDIS sizes? Here’s the print your own version: fully parametric, resizable, wall-ready. Pick any size you want, 80 mm to 360 mm included Standard 20 mm spacers stand-off Countersunk mounting screw…
Infinite ways to create pegboard holders and bins for tools, parts or display objects. Highlights: One or multiple (m•n matrix) objects per holder Round, square or rectangular with rounded corners Generate various shapes of bins and trays…
This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…
3D MODEL DESCRIPTION Since the space of my desk getting lesser and lesser… so I have think of a effective way to re-organise all the tools and other stuffs… Pegboard is a fancy way to keep the things organised as we can mix’n’match the…
These pegboard hooks and mounts are designed for standard American pegboard with 1 inch (25.4mm) spaced holes that have a hole diameter of 3/16 inches (4.8mm). If you like what I am doing, just send a friendly comment. Knowing people find…
Print your own efficient common tools' toolbox for your pegboard wall. Turn your supports off in your slicer, you will not need support for any of the files includes here. Defy gravity with the "levitating" placement of those designs on…
Pegboard in 3 different sizes. Fully compatible with the IKEA Skadis Pegboard solution. Print settings: 0.2 mm layer height No support needed Mounting: Please use 3mm or 4mm screws. Max head size 8 mm. Either place the board mounts or…
I liked the idea of a honeycomb pattern to freely organize screwdrivers and other things from toya ( https://www.thingiverse.com/thing:3018389 ) But the solution had some flaws which forced me to redesign it. I do use Pegboards from…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Background I tried out several hook designs available for US pegboard, but none fit my pegboard just right or had sufficient strength/geometry for my needs. I spent enough time printing & testing incompatible designs that I finally gave…
Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
The Ikea Skadis pegboard is cool, and cheap, and quite functional, but at the same time, its accessories are quite expensive. When I moved into my new apartment, I got three of them in order to store a bunch of stuff on the wall of my new…
The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
This is a parametric tray for the IKEA Skådis pegboard. The model can be customized in FreeCAD to fit your needs. Print instructions Customize in FreeCAD. Print without supports (if your dimensions are within reason).
Assorted pegboard accessories. Made to fit http://www.biltema.se/sv/Verktyg/Arbetsbank-och-forvaring/Verktygstavla-och-hallare/Verktygstavla-2000022183/ but probably fits most pegboards. I've succesfully printed most of these without…
I remixed this design to include hooks that allows the box to be mounted to the pegboard without having to glue hooks. This means that supports are needed during printing. I have used Tree support rather than normal support as it is…
Parameters: HoleSpacing - How far apart the center of each peg is. Default = 25mm PegHoleDiameter - The width and height of each square hole. Default = 5.5mm PegboardHeight - How tall the pegboard is, which dictates stiffness. Default =…
LED-Frame for IKEA SKADIS pegboard 🚀 ⚠ Before you start this project, check out the New Version 2.0 of this design! It's a new iteration with better modularity and available CAD files. --- I'm sharing the design of this LED-Frame I made…
My original design from Thingiverse was remixed into a better design , which I used instead of my own. I decided to resurface it here with some improvements of my own. This design is a little more rigid and snug. Enjoy! I've used it in…
Stop the original metal hooks from falling down and ratling around. Use the 3D printed hooks for even more securely fastened hooks as well as to spice up the colors on your Skadis board. The included tool allows for quick and easy removal…
Just a small cup to mount on a pegboard to hold small items like screwdrivers. Edit: Added a second bigger model due to several requests. I had initially made the cup smaller to fit very snug and secure into my pegboard so I didn't risk…
I decided to clean up my tools. Started with wall control and then added more metal pegboards later. The pegboards I ended up with have smaller holes so I modified the anchors to suit mine, both are included. These will fit both pegboard…
Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…
Simple phone (or Tablet) holder with two angles for the popular Ikea skadis pegboard. I used the awesome T-Clip Design of Xuis (https://www.printables.com/model/256896-skadis-t-clip-system) to attach this holder to the Board. Please…
Simple and strong little hook. Updated Feb 16/22 Appreciate everyone's feedback! Version 2 is available below. While still a snug fit, this one doesn't need anywhere near the same amount of force. Feedback is always welcome. Hoping to…
A customizable, freestanding desktop pegboard designed to organize your workspace, electronics bench, or hobby table without drilling holes into your walls. Compatible with standard slotted pegboard accessories (such as IKEA SKÅDIS hooks,…
SKÅDIS Shelf Tray - Asanoha Pegboard Organizer Discover a practical and refined way to organize everyday items on your SKÅDIS board. This collection features three trays designed to hold kitchen, office, or studio accessories securely and…
Some universal hooks for pegboards like IKEA SKADIS or UPPSPEL. Different lengths available. Printed with PLA and 15% infill. No supports needed. Material prize is around 0,05€ for each. Freecad model and .stl files attached. Have fun!…
Here is an OpenSCAD library to generate accessories for the IKEA Skådis pegboard . Check the instruction linked below for the usage: https://github.com/franpoli/OpenSCADutil/tree/master/libraries/ikea_skadis_pegboard_accessories Download…
I've designed a minimalistic Xbox Controller Stand for the IKEA SKÅDIS pegboard Subscribe or follow me on: Instagram: https://www.instagram.com/agepbiz/ YouTube: https://www.youtube.com/user/agepbiz Twitter: https://twitter.com/agepbiz
TOOL HOLDERS AND PEGS REVISED!! UPDATED Aug 19, 2026 Added battery holder, remixed the excellent holder by Jerrari to add UniPeg slots Replaced Battery Post V4_Curve Down, removing weird void found by user @Glory0_2597396 UPDATED Jan 20,…
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Here's another modification I've done to be compatible with the Skadis Pegboard! The easiest was putting the hook on. The hardest was making sure every controller I had was fully compatible. I used the modified ps4 controller holder as a…
UPDATE 09.01.2023: I created a stronger version for heavier tools and with an extension on the left to better handle forces from one side (for the extension on the right just mirror the model in your slicer). I have also included the…
A small shelf to present your 3d Prints on a pegboard-wall. For this model a bit of support is needed to print the holder for the shelf. Pegboard holedistace: 23mm Pegboard holediameter: 6mm
Simple hooks for the SKÅDIS pegboard from IKEA. OpenSCAD files are included for your adjustments.
Hooks and a paper towel holder for IKEA Skådis pegboard. As seen in YT Short video: https://youtube.com/shorts/XZz_wNMSfuw?feature=share
this clamp holds skadis pegboard made by MAQUINA : https://www.printables.com/model/73926-ikea-skadis-pegboard-200x200mm the 3mm version
A simple hook I made for my pegboard that uses 9mm square holes with a CC of 38 mm. I printed in PLA with 40% infill and it feels very solid.
I liked the idea of this design …but I wanted one with wider and more more slots and would not require supports to print. So, I created this design which has 8 slots to fit standard 5-inch/127mm sanding discs. I made the walls have…
Tired of gloopy overhangs? Need to mount gridfinity organizers on an IKEA skadis pegboard? Welp, here it is! Remixed @glitchprinter's 2x4 baseplate with four ikea skadis universal mounts. --- Parts used in this remix Magnetic Frame - 2x4…
These hooks are perfect for hanging hats, keys, necklaces, or anything with a loop from a pegboard! They are specifically sized for a board with 1 in (25.4mm) space between holes, and a thickness of 0.26 in (6.7mm). Printed on my…
Remixed Meta Quest 2 HMD and controller mounts for the Ikea Skadis pegboard or equivalent
I was missing the hooks for the Pegboard ( http://www.pegboard.perfonet.de/de/das-pegboard/ ) I am using. size: 120 x 60 x 0,5 cm perforation: Ø7 mm hole spacing: 25,4 mm Source: https://www.tinkercad.com/things/gd2YuYFwI4F Print…
Paint Rack for IKEA Skadis Pegboards Paint storage rack for 26mm paint bottles that can be attached to an IKEA Skadis pegboard. Includes pins to attach it and sturdy holes in the rack that will not break over time. Parts fully designed in…
This is a remix from @doc 's design: https://www.thingiverse.com/thing:2815022 I trimmed the back plate little slimmer, and made screw holes to fit Biltema perboard. I printed this with 4 walls and 4 bottom and top layers.Infill 10% is…
I modeled this plier holder for a standard pegboard. I was having issues with existing holders not sticking well to my print bed so I added a connector between the main body and the end of the two pegboard hooks. Just snip this connecting…
Designed to be able to securely screw heavier objects onto the pegboard. Takes a bit of force to insert and tightens pretty well when a 3mm self taping screw is added. Can also be locked by pushing in some 1.75mm filament. Comes in 1, 10…
This is a design that allows you to create a customized Perler (aka Hama / melty beads) bead base in Fusion 360. I originally designed this in OpenSCAD but found that it took way too long to render. Fusion 360 allows you to have a…
This model is a fully printable shop towel pegboard mount with a quick load function for ease of use (and tactical towel reloads, of course). No dowel rods required! Fits a standard 1" x 1" pegboard, and can be removed/adjusted as needed.…
DeWalt battery holder that mounts to a 1/4" pegboard and takes two standard size 20V (AKA 18V in some parts of the world, but using misleading marketing is the norm in North America) DeWalt batteries. I wanted a sideways mount so that I…
Been looking for a way to display my diecast collection with the help of 3D printers. Discovered IKEA Skadis boards and all the cool items made to be used with them. Been looking for some designs to print my own boards and I liked Asraff…
This is a caliper mount that is easy to print and attaches to a Multiboard pegboard/small hole using a T-Bolt.
Variety of pegboard hooks with included sourcecode. These pegboard hooks are designed to work with standard 1-inch center-to-center pegboard with 0.25-inch holes. The design includes one tight fitting peg which improves their strength and…
Simple storage tray for general use with a pegboard. Conveniently, they sit almost flush together, horizontally, if you want to print a row of them. Feel free to tinker: https://www.tinkercad.com/things/gWTecoGJSHi-pegboard-storage-tray…
remix of Spray Can Holder 4 PegBoard to add hook to pegs : https://www.thingiverse.com/thing:3657721 Category: Organization
Various parts for a standard ¼" x 1" spaced pegboard. Screwdriver holders, pen/pencil holders, and a sharps container. Place the pegboard mount into the pegboard, and if desired, place a small m3 nut in the back prior to installation.…
General: Please take a look at model/228663 for a detailed explanation of what this is and what’s it for. This versions are probably not as tough as the versions with hex-nuts, but usable. Preparation: As my printer produces slightly…
A lockable pegboard rivet for 1/4" pegboard. This is based on similar designs I found on Thingiverse, but tweaked to my liking. Pegboard Push Rivets by Kenneth Stout Pegboard rivet by Jon Sanders I liked the general design of Kenneth…
One of the tricks I like to use in organizing my tools is to attach things to pegboard using wall anchors in the holes to accept screws. This doesn’t always work as well as I would hope. Since pegboard is usually 1/4″ thick or thinner,…
pegboard shelf 5 pegs wide. Printed with supports from build plate only. Started by trying to modify Harti's shelf but ultimately scrapped the whole shelf except the peg and started over.
Pegboard shelf mount of about 222mm deep. This bracket has some discrete curvature to the supporting struts. Supports are required for the outermost pegs and hooks only. (Middle ones are angled such that no supports are required).…
I needed to save some space in my painting area and I decided to get a Ikea SKÅDIS. I wanted to have the bottom of the bottles facing out so I can have a better view of the colours. I made 2 sizes so I can maximize the size of the…
This might take a lot of prints and adjusting to get right. Wish I could remember the brand of pegboard this is.
NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25…
When you need a help hand or just something held, for like a minute… Recommend printing the hooks with 80% infill for increased strength, but the rest can be 10-20% infill. Update: I promise it was not intentional that the helping hand is…
Print with a material that won't deform with pressure. I personally use PETG.
Screw driver holder for larger screwdrivers. Comes with ready-to-use stl files for 6, 5, 4 and 3 screwdrivers. The pre-made stl files use a hole size of 7.2mm, hence supporting screw drivers with a diameter of up to 7mm. Requires 2x…
Adds a small section of 5mm thick IKEA Skadis pegboard to a standard 1 inch pegboard grid. Use the loose model if your printer prints inner dimensions undersized, the holes are .2 mm wider. Example in image is Digital Caliper mount for…
This is a pegboard jig that will allow you to accurately drill pegboard holes into material with standard metric pegboard sizes (6mm diameter holes spaced at 25mm). This makes it an effective tool to make pegboards out of scrap material…
![Gridfinity baseplate [2x4] with Skadis Universal Hook mounts for IKEA pegboard](https://media.printables.com/media/prints/470819/images/3857666_7ac9f740-3494-4946-9ed0-4cf2565ed3cb/img_8401.jpeg)
