Search results: pelle

Sort order

1,414 models

P
PrintablesMeister Edel

Toroidal Rotor 4 Strong Flying Propeller

This is a remix of my Flying Copter Toy :) My first ones still last strong but everyone is talking about toroidal rotors. I really like this design and I think it is a meaningful appreciation of the main design. But try it out yourself! I…

Downloads
32,625
Likes
7,424
Rating
4.96
P

Flying propeller toy

A small and simple flying propeller toy for all ages. The propeller doubles as a spinning top when it lands. Print instructions Just print and play

Downloads
10,050
Likes
1,062
Rating
4.81
P
PrintablesChris B

Variable Pitch Propeller Mechanism

Updates description at the bottom Overview A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley, adapted for 3D-printing. Variable pitch propellers allow the pilot of an airplane to adapt the angle of…

Downloads
4,612
Likes
2,344
Rating
4.9
P
PrintablesC Model

Propeller

New update Version 2: https://www.printables.com/model/635059-propeller-version-2 Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!

Downloads
3,359
Likes
144
Rating
4.67
P
PrintablesMaxGyver

Boat Propeller 20cm, 13cm and 10cm diameter, 10mm shaft

Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…

Downloads
3,137
Likes
159
Rating
4.83
P
PrintablesLudo B

schroef, propeller, hélice. Bootschroef. Hélice de barco. Hélice de bateau. Boat propeller.

Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.

Downloads
2,534
Likes
117
Rating
5
P
PrintablesIan

Toroidal 6 blade propeller

I loved the original toroidal pull-copter design, and thought it would look cool if I combined 2 together. It weighs a little more than the original, but I feel like it's more stable in flight, and it looks cool! Prints great in PLA and…

Downloads
2,079
Likes
208
Rating
4.94
P
PrintablesGeorge Duma

Drone propeller

a drone propeler with diameter 4.8 cm

Downloads
2,066
Likes
139
Rating
4.67
P
Printables3DVJ Models

Hand Powered Helicopter/Propeller Toy

Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…

Downloads
1,596
Likes
237
Rating
4.75
P
PrintablesManabun Lab

Toroidal propeller launcher (snap-fit model)

●Updated April 11th, 2023 at 6:49 PM Japan time. I have made adjustments so that the shaft and gear do not spin idly. As a result, all parts in the Main body parts folder have been updated. ●Updated March 18, 2023 at 2:25AM Japan time.…

Downloads
1,489
Likes
295
Rating
4.85
P
PrintablesRobert Schiele

Strong Flying Propeller Max

You will find detailed instructions on printing in the original models or if you have a Prusa MK3S(+) use my pre-sliced files with PETG. Those files max out the print bed of the MK3S+. For the rotor, I had to redesign the model since the…

Downloads
1,374
Likes
129
Rating
4.8
P
PrintablesC Model

Propeller Version 2

Version Original: https://www.printables.com/model/608372-propeller Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!

Downloads
1,170
Likes
49
Rating
4.75
P
PrintablesHD_Creator

Folding propeller for pusher and tractor planes

Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…

Downloads
838
Likes
103
Rating
5
P
PrintablesLaure3D

Propeller _ Hélicoptère

Petite hélice qui vole très, très haut! Si vous regardez, ma video Tiktok @laure3d vous verrez que je l'ai perché tout en haut d'un arbre! Ceci est un remix du modèle d'Harald Andersson. Les hélices sont orientées dans l'autre sens ainsi…

Downloads
788
Likes
54
Rating
4.8
P
Printablestoosafelol

Custom Plane Propeller(x3) V1

A Custom plane propeller that I made for my Pichler C9104 brushless motor (https://shop.pichler.de/Brushless-Motor-BOOST-40-V2) Blade size is 100mm per blade and a 20.3mm "base: to which the blades attach. Easily fits on a Mk3/4 bed. End…

Downloads
701
Likes
30
Rating
4
P
Printableszuim

Fully printed Quadcopter/Drone Frame for 9" propellers

This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…

Downloads
636
Likes
123
Rating
5
P
PrintablesJozefS

Fan propeller

The best way to remove the supports is to separate them as a whole with a knife. I carefully pushed the knife between the propeller blade and the support from the leading edge. I removed the inner part with narrow pliers and cleaned it…

Downloads
616
Likes
18
Rating
5
P
PrintablesLudo B

Linkse bootschroef met 4 bladen. Left hand boat propeller with 4 blades

In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo

Downloads
385
Likes
15
Rating
0
P
Printableskaidoestech

Propeller protector for Drone Pro/E88/E99/E58 - Nubs removed

A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…

Downloads
331
Likes
29
Rating
5
P
PrintablesChristophe D FR

Broom and broom-like hooks / clip et 2 crochets pour suspendre un balais, une pelle, ...

Un clip et deux versions de crochets pour suspendre des balais, des pelles, … bref du rangement / one clip and two versions of hooks for hanging brooms, shovels, ... more and more storage

Downloads
321
Likes
32
Rating
5
P
Printablesbloudakm

Tello drone propeller guard

A much more rigid and tough propeller guard, made to withstand more devastating crashes, than the original one provided by Tello. Print Settings Printer brand: Prusa Printer: i3 MK4 Rafts: Doesn't Matter Supports: Yes Infill: 20% Filament…

Downloads
225
Likes
15
Rating
5
P
Printables3DPrintM.D.

Seed starter for peat pellets using biodegradable PLA filament

This peat pellet holder is easy to print, and utilizes a slab modifier to create a honeycombed pattern throughout the unit. Printed using PLA “biodegradable" filament (https://www.amazon.com/dp/B0853468ZF) with 10% honeycomb fill density…

Downloads
115
Likes
27
Rating
0

Box for airgun pellets - Straton

Box for airgun pellets - Straton Box for airgun pellets in the shape of JSB Straton. The box can hold approximately 200 pcs of airgun pellets.

Downloads
112
Likes
15
Rating
0
P
Printablescunninghamd
18+

The source marked this model as adult content.

Downloads
97
Likes
10
Rating
0
P
Printablesdawid

pellet container

Pet-g and patience . My first projects, so I apologize for any mistakes :D

Downloads
81
Likes
7
Rating
5
P
Printablesmunzli

propeller adapter and spinner (kyosho airium edge)

the airium line of kyosho (piper, edge and the curtiss p-40) and the hobbyking spad XIII 700mm used a 2 blade prop (kyosho item nr. A0905-06) that isn't available anymore. here's an adapter and spinner that can be used with APC…

Downloads
79
Likes
4
Rating
0
P
PrintablesJosef Drapák

Oběžné kolo pro ponorné čerpadlo / Impeller for submersible pump

Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.

Downloads
68
Likes
10
Rating
0
P
PrintablesAdam Bennett

Ultra tiny props for High Speed Propeller Launcher

I made a tiny propeller for Lukas Hannert's high-speed propeller launcher found here https://makerworld.com/en/models/628601-high-speed-propeller-launcher?from=search#profileId-553231 . I made the small version of his launcher(available…

Downloads
57
Likes
8
Rating
0
P
PrintablesKarsten

Feuerrohr-Trichter für Pellets - Fire tube hopper for pellets

Das Rohr hat einen Innendurchmesser von 55 x 55 mm. Der Trichter wurde unten mit 52 x 52 mm gedruckt (Aussenmaß), damit passt er auf jeden Fall. Die obere Einfüllung hat einen Durchmesser von 150 mm. Gedruckt in PLA. The tube has an inner…

Downloads
49
Likes
4
Rating
5
P
Printablesmachirou

Tello Propeller Case

A sturdy sliding case that can store a pair of Tero propellers and a removal tool.

Downloads
38
Likes
5
Rating
0
P
Printablesm750

Pellet drum (Den-den daiko)

This is a pellet drum that uses the core of a Prusament roll as the body and a flange of the roll as a jig for making the drum. Video of the drum in action can be found here: https://youtu.be/ji8pCOQYJvM PDF instructions for building the…

Downloads
33
Likes
15
Rating
0
P
PrintablesEskichagar

Pelle à glace - Ice shovel

Pelle plus grande pour prélever des glaçons ou vider la glace d'un congélateur en dégivrage. Imprimé en 2 heures en PETG Prusament, 20% remplissage, hauteur de couche 0.28 mm, buse de 0.4mm sur Prusa MK4S. Bigger and wider shovel to scoop…

Downloads
31
Likes
2
Rating
0
P
Printablesarcanelayers

Perforated Canister with Screw Lid For Carbon Pellets

This 3D model is a perforated canister with a screw-top lid, designed to house activated carbon pellets. The perforations on the canister allow for airflow, enhancing the activated carbon's ability to absorb and neutralize unwanted odors…

Downloads
24
Likes
3
Rating
0
P
PrintablesPeopleware

Pelletwächter Lite (DPMA 20 2026 000 659) Kontrolle über Pellet Verbrauch und Füllstand der Ascheschublade

>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…

Downloads
4
Likes
1
Rating
0
P
PrintablesMeister Edel

Strong Flying Propeller / Pull Copter (No Supports)

Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…

Downloads
114,780
Likes
23,046
Rating
4.91
P
PrintablesAnachronist

Elliptical-blade NACA airfoil propeller library

This is an OpenSCAD module library for propellers and spinners. See this excellent video by Bruno Antunes on how to integrate this library into Fusion 360. This design models elliptical propeller blades that transition smoothly through…

Downloads
7,467
Likes
600
Rating
5
P
PrintablesNikorasu

The Ultimate Propeller Launcher w/ 64x Gearbox

This is a high-power flying propeller disk launcher, that uses a compound/stacked planetary gearbox with a ratio of 1:64! (x4 each layer) Video of it in action: The gearbox layers print-in-place, and are designed to easily assemble with…

Downloads
7,306
Likes
901
Rating
4.66
P
PrintablesSTRIKING FPV

V3 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…

Downloads
6,800
Likes
513
Rating
4.55
P
PrintablesNassosT

DJI Mini 3 Pro Propeller holders (top & bottom)

Printed in PETG provides adequate flex for putting them on and off multiple times.

Downloads
3,873
Likes
369
Rating
4.93
P
PrintablesTinyTexas

LW-PLA/PLA RC Plane - Pusher Propeller (PProp)

Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…

Downloads
3,285
Likes
452
Rating
5
P
PrintablesSTRIKING FPV

V2 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…

Downloads
2,790
Likes
193
Rating
4.6
P
PrintablesMatija

DJI Mini SE/2 - Minimal Propeller Guard

Printed with 0.4 nozzle, brim for extra adhesion and supports. Sharp small scalpel is recommended to remove brim and extra material I've put on holders so it can be printed, it's only 1 wall thick and should be visible line that follow…

Downloads
2,525
Likes
300
Rating
4.77
P
PrintablesTeachingTech

Self feeding open source filament pelletizer

Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…

Downloads
2,140
Likes
1,416
Rating
5
P
PrintablesNight6488

NACA airfoil RC plane propeller generator

Be careful!!: 3D printed propellers could possibly explode when reaching high rpm's. I strongly discourage using it in BLDC motors, or any other high-rpm motor. I just modified the original code (many thanks to the og author, great coder…

Downloads
2,089
Likes
88
Rating
5
P
PrintablesResphiq Ann

TURBO IMPELLER

This 3D model of Turbo Impeller. This model does not use the standard size of the manufacturer. Only for test 3D print and display.

Downloads
1,975
Likes
75
Rating
5
P
PrintablesDeathKing

MINN KOTA Trolling Motor Propeller Blade

I build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there. I add a small center part of if too, so…

Downloads
1,951
Likes
144
Rating
5
P
PrintablesSmilingImpact

RC Boat Propeller

Printing this as replacement prop for Harbor Freight RC Neptune boat. I really have no idea about RC boats, or propellers, I just eyeballed the plastic ones that came with the boat and modeled it in blender Main reason is that this PLA…

Downloads
1,943
Likes
95
Rating
0
P
PrintablesTim O'Brien

Drone/Plane Propellers– generative design, any size

In 3d printing a RC Stearman model I needed an 11x5.5 prop. Instead of paying $3 for one I spent thousands of person-hours using high-expertise design skills to build this! It's a procedurally generated propeller design that's…

Downloads
1,914
Likes
138
Rating
4
P
PrintablesEngineer

Propeller

Propeller for everything.

Downloads
1,819
Likes
57
Rating
5
P
PrintablesCPSdrone

Underwater toroidal propeller inspired by MIT design

This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…

Downloads
1,740
Likes
92
Rating
5
P
PrintablesBFree_42

Propeller for RC Airplane (with Prop Saver)

Introduction When first learning to fly RC airplanes, it's hard to overstate the importance of a steady supply of spare parts. Flying is quite easy; it is landing that's hard.* The Ares Gamma 370 was not my first RC plane, but it was my…

Downloads
1,677
Likes
117
Rating
5
P
PrintablesKucici

DJI Avata 2 Propeller Shields

Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…

Downloads
1,671
Likes
162
Rating
5
P
PrintablesSly

Toroidal Propeller for The Ultimate Propeller Launcher

forked an open source toroidal propeller generating tool to add the appropriate hub for the launcher. Flies much further than the propeller design in the original project! Modified in Solidworks after export from SCAD to add fillets.…

Downloads
1,649
Likes
112
Rating
4.95
P
Printablesuhltimate

Underwater Torpedo with Toroidal Propellers and Rubber Band Motor

Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…

Downloads
1,550
Likes
470
Rating
4.8
P
Printablespw.prints

RC Boat Propeller 3 Blade d=4mm D=45mm P=50mm DriveDog

Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm

Downloads
1,536
Likes
59
Rating
0
P
PrintablesRaul Bejarano

Ultimate Toroidal Propeller Generator

Ultimate Toroidal Propeller Generator The Ultimate Toroidal Propeller Generator is an open source project that provides a way to generate STL files of toroidal drone propellers. 🔽 Download SCAD files here 👉 Go to Ultimate Toroidal…

Downloads
1,534
Likes
261
Rating
4.4
P
PrintablesMW-Mechanical

Centrifugal impeller style water pump- drill powered

Video performance demonstration through the following link- All components 3D printed except nine M4x16 hex head bolts & nuts and one M6x50 hex head bolt and nut . Size: roughly 80mm x 80mm x 50mm Couplers intended for 1/2"IDx 5/8"OD…

Downloads
1,471
Likes
354
Rating
5
P
PrintablesLindArt3D

Propeller (Schiffsschraube)

Propeller für Modellbau

Downloads
1,466
Likes
61
Rating
5
P
Printablespw.prints

RC Boat Propeller 3 Blade d=4mm D=40mm P=50mm DriveDog

Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 40mm Bore diameter: 4mm Pitch: 50mm Height: 15mm Type: DriveDog 3,7mm

Downloads
1,464
Likes
81
Rating
4.67
P
PrintablesJP3D

Propeller Generator Parametric

Fusion 360 file with parameters that lets you create different propellers. List of parameters: wings_count: Number of wings wings_d: wingspan wings_h: height of the wings wings_turn: angle covered by one wing (must be between 1° and…

Downloads
1,437
Likes
143
Rating
4.33
P
PrintablesAaron Highfill

Toroidal Propeller

Toroidal propeller for rc drones

Downloads
1,345
Likes
120
Rating
4.75
P
PrintablesGrey

NEW!!! Toroidal Propeller Maker V2 (Fusion 360)

[Parametric Fusion file for designing toroidal propellers (for drones)] V2 AVAILABLE NOW!!! Changes in V2: Blade Count Parameter! (Be careful with the count or else fusion might crash. DON'T TRY OVER 100!) Parametric Fillets to improve…

Downloads
1,326
Likes
96
Rating
5
P
PrintablesH3dSprint

Propeller with ⌀75mm for a shaft ⌀2mm

Part is printed with PETG and need partial supports.

Downloads
1,285
Likes
45
Rating
5
P
PrintablesSTRIKING FPV

V2 Tri-Loop or Tri-Blade Toroidal Propellers for FPV Drone Quadcopter Cinewhoop

IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…

Downloads
1,270
Likes
97
Rating
0
P
PrintablesDape

Propeller

3D printed propeller project, 7 pieces glued together, total length 120cm, painted, clear coated. Free download:…

Downloads
1,226
Likes
69
Rating
0
P
Printablesuhltimate

Flying Propeller (Pull Copter) & Spinning Top (No Supports, No Assembly Required)

Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…

Downloads
1,198
Likes
117
Rating
4.25
P
PrintablesJens

DJI Air 3 Propeller Holder V2

This is my second design on a propeller holder for the DJI Air 3. PLA/PETG/TPU/... approved. I added some arrow to the lower part, the tip needs to face in the front direction of the drone. Also I added an DJI logo next to the smart-clip…

Downloads
1,187
Likes
84
Rating
5
P
PrintablesMattG

DJI Mavic Air 2 propeller case

A compact case to hold propellers for the DJI Mavic Air 2. The propellers slide onto rods printed in the base of the case, and the propeller tabs rest in recessed holes on the top and base of the case. Remember to always inspect your…

Downloads
1,186
Likes
186
Rating
4.88
P
PrintablesSmilingImpact

Loop propeller similar to Sharrow MX-1

I think the Sharrow MX-1 is pretty cool looking and if it lives up to the hype perhaps a new standard in marine propellers. Print Settings Printer Brand: Creality Rafts: No Supports: Doesn't Matter Category: Hobby

Downloads
1,180
Likes
39
Rating
0
P
Printablesmuhammedp903

Propeller Holder for DJI Mini 2 (+ Mini / Mini SE / Mini 4k)

Propeller Holder for DJI Mini 2 Should also fit DJI Mini SE and Mavic Mini and Mini 4k, although not tested. Please share if you try. Can be printed with PETG/PLA/etc or flexible filaments like TPU. I recommend changing no. of perimeters…

Downloads
1,179
Likes
168
Rating
4.94
P
PrintablesKSAH

Propeller with Gear

Beim Bambu Drucker war ein kleiner Propeller dabei. Erinnerungen an früher kamen auf. Ich dachte, es geht auch besser. So entstand dieses Projekt hier. Druckgröße ist 180 auf 180 mm. Ich habe absichtlich Step Daten hochgeladen, bin kein…

Downloads
1,175
Likes
346
Rating
4.6
P
PrintablesSTRIKING FPV

V1 Bi-Loop or Bi-Blade Toroidal Propellers for FPV Drone Quadcopter

Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…

Downloads
1,160
Likes
108
Rating
5
P
PrintablesHamzaCinar

Underwater Pose / Underwaterpose for Fishing | Unterwasserpose fürs Angeln | w. Propeller / Propellerpose

This Time i modelled an UNDERWATER POSE ! This was a request from a good friend who wanted to print some Poses. --------------------------------------------------------------------------------------------------------------- But do you…

Downloads
1,140
Likes
170
Rating
4.83
P
PrintablesChristian

Folding Propeller for RC Planes

This is a folding propeller I created years ago. I flew this propeller myself on upscaled (130%) versions of the Nucking Futs printable pylon racer. Link to Airplane: https://www.thingiverse.com/thing:3358880 Please give credit to the…

Downloads
1,126
Likes
108
Rating
5

62mm LEGO boat propellers

62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.

Downloads
1,102
Likes
61
Rating
5
P
PrintablesCarlRoos

DJI Avata 2 Bumpers with Propeller Guards

This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…

Downloads
1,099
Likes
74
Rating
4.8
P
PrintablesWim V

Advised Propeller (for use With Propeller Launch Base)

A remix combining the good flying properties (my experience) of the Flying propeller toy by Harald Andersson and the coupling mechanism (square 5) of Strong Flying Propeller by Meister Edel I made this remix after testing for use with my…

Downloads
1,096
Likes
51
Rating
4.82
P
Printablesjaln

DJI Mini 2 Light Landing Extenders (& propeller blade holders)

Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…

Downloads
1,084
Likes
182
Rating
5
P
Printablesilikeapples12

5045 tri propeller

none of the 5045 tri-props i found online provided enough thrust so i modeled my own uses a NACA4415 airfoil

Downloads
1,078
Likes
35
Rating
5
P
PrintablesKerim Tapan

DJI Mini 3/4 Propeller Guards (find 4 Pro in Remix)

Press fit propeller guards for DJI Mini 3 Drone No extra material required Easily mount/dismount onto the motor case No sensor interference Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Supports:** No Resolution: variable…

Downloads
1,075
Likes
69
Rating
5
P
PrintablesYella

Spitfire Xiv improved files with propeller and stand

As with the original spitfire model, gluing of the body halves, armaments, horizontal stabilizer is required. your choice of smooth spinner, or full propeller (also needs to be glued and assembled. Category: Vehicles

Downloads
1,047
Likes
145
Rating
4.5
P
PrintablesJame

Hand-thrown propeller airplane

For ease of use and playability, I prefer children to have a hand-thrown airplane. However, the available options for this type of airplane are almost the same. Making a hand-thrown airplane with balsa wood and film is very cumbersome.…

Downloads
976
Likes
135
Rating
5
P
PrintablesShmuel Moses

Mini propellers

update - print this with PETG or ABS (I tried with PLA but the propellers melted). -0.05mm layer height -brim for 2 blades and raft for 3 blades -you can try another filament or settings. good luck.

Downloads
905
Likes
14
Rating
5
P
PrintablesCl@Gr3

DJI Mini 3 Pro Ferma eliche superiore ed inferiore - DJI Mini 3 Pro Propeller holders (up/down)

ITALIANO Ho disegnato questi ferma eliche basandomi sul modello di NassosT cambiando alcune misure aggiungendo una parte per proteggere anche l'estremità delle eliche. Ci sono due modelli, uno che riporta il mio logo ed uno neutro senza…

Downloads
888
Likes
120
Rating
5
P
Printablesbartosslajos

Boat propeller

This is a simple, 3d printing friendly propeller. I had a broken boat propeller and I replace it with this part. In the .3mf file there are one of them according the .stl, the other one is a mirrored (in Prusa Slicer) geometry. Check the…

Downloads
877
Likes
36
Rating
0
P
PrintablesBuildX

#0062 Toroidal "Ninja Star" Rotor/Propeller

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…

Downloads
849
Likes
127
Rating
4.8
P
PrintablesMichael F

Propeller with airfoil blades

I did not print with supports but they may help. The propeller should make for longer flights. Enjoy!!!

Downloads
849
Likes
53
Rating
4.94
P
PrintablesSkalski

Ships propeller

Just learned how to make propellers... so here´s a few! Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 99 Filament: any PLA Notes: You might have to use a small brim for…

Downloads
830
Likes
53
Rating
5
P
PrintablesMilanko

Trojlistova vrtuľa (Tripple propeller)

125mm - 5" výška 10mm PETG - Podpery nevyhnutné, ideálne Organic

Downloads
811
Likes
25
Rating
5
P
Printablesliangodesigns

120mm boat propeller for 10mm D-shaft

I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…

Downloads
808
Likes
39
Rating
4
P
PrintablesCask_tools

Tello drone propeller guard v3

Propeller Guard / Blade Protector for DJI TELLO micro-Drone. Print with support. Thinner and lighter than the genuine ones. UPDATE 23/03/2020 / v2.5 : here is a slightly thicker version (the original file is a bit sketchy, so changing…

Downloads
800
Likes
51
Rating
3
P
PrintablesCheckThisOut

Crank Handle for Ultimate Propeller Launcher

My son suggested a crank handle might be easier to use than the original twist handle. It also provides more leverage to launch the propeller further. We tested two different lengths. Both files are included. The long handle provides more…

Downloads
775
Likes
47
Rating
4.9
P
PrintablesThe Duck Vault

Propeller Guards for Mk4 7 inch Drone

MK4 7-Inch Drone Propeller Guards This project is proudly sponsored by PCBWay – Your One-Stop Solution for PCB and 3D Printing Services I’m excited to share my new propeller guards designed for the MK4 7-inch drone frame . These guards…

Downloads
773
Likes
19
Rating
0
P
PrintablesTim A.

Strong Flying Propeller / Remix v2

UPDATE 2023-09-30: I have now made version 2 of the remix. The securing pin is removed and a similar funcion is integrated directly in the handle, making the handle assembly consisting of 3 parts. The gear is secured by a springy snap pin…

Downloads
740
Likes
92
Rating
4.6
P
Printablespw.prints

RC Boat Propeller 2 Blade d=4mm D=59mm P=50mm DriveDog

Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm

Downloads
739
Likes
49
Rating
4
P
PrintablesEduardo Szesz

Propeller launcher

In this remix, models from https://www.myminifactory.com/object/3d-print-zip-top-spinning-top-14005 were edited to improve the handling of the launcher. It is a fun toy and makes a good gift for a kid to play outside. It prints well in…

Downloads
704
Likes
56
Rating
5
P
PrintablesWim V

Propeller Launch Base

Launch your propellers using this mechanical marvel instead of a rip cord. For the standard coupling I used the square coupling (same as Meister Edel did). To possibly create other coupling mechanisms I have added a stepfile of a coupling…

Downloads
698
Likes
271
Rating
4.7
P
PrintablesSergej Naumovs

DJI Lito 1 / x1 propeller holder

DJI Lito 1 / x1 propeller holder No supports needed. Printed bracket in PTEG, starp TPU 95a Added v2

Downloads
689
Likes
69
Rating
5
P
Printablessuodrazah

Drill Powered outboard with multiple propeller options

Drill Powered Outboard (Work in Progress) https://youtu.be/Ix5F3YQOyLg Assembly requirements: Print 1x Propeller of your choice There is an edgeless propeller (prefix WIP), but it is an untested work in progress and requires two M10 nuts…

Downloads
681
Likes
80
Rating
5