321 models
I recommend that you print the model with tree supports and rafts for bed adhesion. It can be heated and adjusted to fit the face more comfortably. I simply used a hair dryer. It is possible to drill holes for the retention string. I…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
GooberFish Skull. It has some spanning artifacts from making it manifold in meshmixer. Just cut them off.
Print approx. €16.86–€20.61 excl. taxPreliminary estimate for one variant
So my Dad has a DJI Phantom 3 and he lost his Stick Tops. I decided to make some. Feel free to modify with the provided Fusion360 “.f3d” file. If you make your own edit and post it then please add it as a remix to this. I ended up…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
An elegant phantom mask. Should be printed with supports (tree) and rafts for good bed adhesion. Can be heated and adjusted to fit face better. I just used a hair dryer. Holes may be drilled for retention string. or can be attached via…
EDIT: I apologize if you were one of the first 13 people who downloaded this model, the press frame had a mistake in it and I have since replaced it with the correct press frame. Quick notes on printing: The press body has some funkiness…
I wanted a tabletop printing press I could take with me to events for live printing and be big enough for me to actually print postcard sized prints. The gearbox gives a powerful 5:1 gear reduction while also remaining compact and…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
The McDonnell Douglas F-4 Phantom II is an American tandem two-seat, twin-engine, all-weather, long-range supersonic jet interceptor and fighter-bomber originally developed by McDonnell Aircraft for the United States Navy. Proving highly…
About the F-4 Phantom II The McDonnell Douglas F-4 Phantom II is an American tandem two-seat, twin-engine, all-weather, long-range supersonic jet interceptor and fighter-bomber. It entered service with the Navy in 1961, then was adopted…
A quick update on my models. Firstly, I found out the hard way that I should make my kit cards at the scale they're being printed at, (Originally, I would make them and then scale them down by 25% in Prusa Slicer). So that's now fixed,…
Uses Ontos V2 hardware. Has no performance upgrades. Made to look like a Phantom from the videogame VALORANT. Not a perfect replica of in-game model, but has enough similarities with original design to be easily recognizable
Designed to print with either no supports or minimum supports, and orientated so that there are no weak points, particularly at the leg clamps. There are two versions: Gimbal Lock.stl, which is about the same dimensions as the original…
Krait Phantom model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam, no supports This work is strictly fanart and not meant for commercial…
F-4 Phantom II (Included a cockpit photo) (Cut into pieces for easy and less supported printing)
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Rolls-Royce Phantom I, produced in 1927, was a luxurious and iconic automobile of its time. Here's a brief overview: Introduction: The…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Update 18 Feb. 2026: As requested, I've added one with "PM" for Phantom Manor in DL Paris. I made this for myself, but I was encouraged to share it. This is a one-sided hotel keychain/keyring with an embossed image on the front depicting…
this is a redesigned version of my phantom blade, the last design didn't fit together but this one should. it needs external parts such as rubber bands, string and rings, two if you want the crossbow to work Category: Gadgets
A replica of the Phantom I shuttle from Star Wars Rebels. It has foldable print-in-place wings. The scale is at 1:270 with a length of 43.1mm and a wingspan of 36mm. (The hinges are 2mm in diameter.) Holder uses a small base and small pin…
Rolls Royce Phantom, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I optimized the OG mask to fit my own face with small modifications mostly on the forehead and the eye.
Experience the pinnacle of automotive opulence with this 3D printable STL model of the Rolls-Royce Phantom. This ultra-luxury sedan model is perfect for automotive enthusiasts and collectors of the finest vehicles, showcasing unparalleled…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
⚠This is not my design, and I haven't tried making it yet myself.⚠ I just made a clearer overview of the model here in Printables. original creator's Thingiverse: https://www.thingiverse.com/liyue_cheng/designs assembly video:…
Cette lampe à poser est issue de mon travail sur les ondulations de surface. J’ai ajouté un rainurage pour mettre en valeur le relief et imprimé le tout en mode « fuzzy skin », parce que je n’avait jamais essayé sur un abat jour blanc et…
Phantom the Flexi Dragon - Keychain we are currently at 4 paid members on Patreon once we get to 10 paid members I will be releasing exclusive models on Patreon If you want a commercial license you can sign up to my Patreon here My…
EDIT1: uploaded a V2 version for Y belt 10mm from my original mod. Step file updated too EDIT2: Tbgs Carriage is complete, the step file is avaible, the mod is on testing, after some tests the stls will be relased IMPORTANT UPDATE…
The Phantom from Titanfall 2, 3D printable and fully articulated. Featuring moveable wings(?), openable canopy with a cockpit interior, pivotable thrusters, rotating guns, and nonfunction landing gear! No screws or glue necessary, though…
Introduction: This mod blocks the vision positioning system (VPS). Keep this in mind, and you may want to disable VPS I personally have not had any problems. Please be safe with this project. Never fly the drone directly over people or…
DJI Phantom Drone Clone Category: Gadgets
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Although at first glance the Phantom FGR.2 appears very similar to its American counterpart the F-4C Phantom II, there are a number of major visual and performance differences between the two aircraft. Phantoms produced for the RAF were…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Work properly with DJI Phantom 3 Advanced & Professional Category: R/C Vehicles
Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
What you need Very simple just 2m of LEDs (about 1.7m but they are usually sold in meters and it is best to have a spare). You will also need x3 M3 by 16mm screws for the mounts. As well as some double-sided tape. I will not show the…
I made this a while ago, never got around to uploading it. print-in-place kit card of the F4 Phantom. A Small Kit Card F-4 Phantom. Once printed wiggle parts free from the frame if any tabs remain use your finger to remove them. then…
Darth Maul Mask made in Blender. Paint masteclass for 3D Printer Party 2024. 0.2 mm layer 5 to 15 % infill Supports on teeth and nose. Horizontal expansion is recommended -0.05 to -0.08 Use flexible band and sponge protectors. Heat the…
This is a replacement power button for the NZXT Phantom 410 case.
Support pour enceinte Devialet phantom Pour la fixation à l’arrière il faut fabriquer une petite patte pour mon cas en métal pour plus de solidité qui sera maintenu par une vis M6 x 30 sur laquelle j'ai crée un petit bouchon pour pouvoir…
Songbird bust from Cyberpunk 2077 Phantom Liberty This model is made to be resin printed This is my first attempt at designing something so detailed so please don't judge too harshly. If there are any issues with printing or you have any…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
SGRT / 4D Test Phantom (Uses Varian Breathing Phantom) Video of Phantom in Action https://imgur.com/DTAPct6 You may find this useful for commissioning and training for the VisionRT or other SGRT systems. I've used it for testing beam…
This Is the Full Phantom Of The Opera mask.
A Phantom of the Opera style mask that I designed to be hung on the edge of a picture frame or mirror. It is based on the one that is actually worn by the Phantom in the show/movie so is the half face mask and as such should sit on the…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This was a commercial project I worked on for a company but it is finished and now I have the right for distributing my work. If you want to buy this kit professionally printed, you can send me a message and we can arrange it. There is an…
all credit to the original designer , I just sliced up the model in bambu so it's a littler easier to print and get started, I also consolidated the materials list so it is less easy to procrastinate. --- print settings build guide —…
Additional parts: 1x Arduino nano 1x Photoresistor 1x 1s 3,7V lipo 1x step-up module 1x JST connector Works by sensing the front LED with a Photoresistor. By turning on the front led, the servo rotates and releases the payload.
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Remade some of the files of the amazing Phantom Plastic Press to replace glue with bolts and nuts.
F-4E Phantom II General purpose, extra large, carrier-based fighter. Though turning performance can be a bit problematic because of the large size of the aircraft, it boasts top class speed performance among the older generation model…
Universal Monsters - The Phantom of the Opera - 1943 3D printable model.
Here is the TreePod for the devialet phantom II To screw to base of speaker use a M5x20 The 4-piece version is a little weak! I suggest using the smaller 1-piece version!
The F4E naval fighter jet. I made this to be printed pretty small, so it's not very detailed. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Notes: Print vertically with…
This chilling ghost figurine brings the perfect dose of Halloween terror! With its wide open mouth, hollow black eyes, and clawed hands reaching out, it looks ready to leap into the night and haunt unsuspecting trick-or-treaters. A…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
UPDATE (June 2017): Added STL file to print two separate antenna boosters. Using this antenna booster you will extend the maximum range of the Remote Controller of your DJI Phantom 4 / Phantom 3 or Inspire 1 up to 2-3 times! All you have…
Beware the spore-filled cave, you never know what you might bump into! This is a 28mm scaled miniature suitable for tabletop gaming use, such as Dungeons and Dragons or Pathfinder. It has been sized to fit on a Medium base (25.4mm / 1…
A shadowy phantom figure with torn cloaks forming spikes at the base, faceless head with glowing rune symbols.
Modern Vehicles - 2026 Rolls-Royce Phantom Centenary Private Collection 3D printable model.
Set of holders of Dronetag products (Beacon, Mini) designed to mount to the DJI Phantom Drone. Leg holder is designed to be press fit on the back right leg and the Beacon or mini devices can be mounted using velcro. For more secure…
I’ve been a huge fan of Andrew Lloyd Webber’s rendition of Phantom of the Opera since a young lad. Late last year, I finally found the chance to watch the 1925 film version of the novel, starring Lon Chaney Sr. as the Phantom. While the…
It works during fly.
Phantom Girl ( Tinya Wazzo. Chica fantasma en Hispanoamérica ) es una superheroína que aparece en libros publicados por DC Comics y es miembro de la Legión de Super-Héroes en los siglos 30 y 31. En la continuidad post- Hora Cero , se la…
This is a direct replacement for the gimbal plate of a DJI Phantom 3 Standard. My nephew Leon broke his Phantom's gimbal plate when he crashed it into a excavator. I scanned the damaged gimbal plate and re-constructed it with Autodesk…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This model is a 3D printable Diabetic Foot Training Model (DFTM) developed for training, prototyping and engineering use in a medical context. The model includes multiple pseudo-clinical wound features inspired by typical diabetic wound…
Using this antenna booster you will maximize the performance of the Remote Controller of your DJI Phantom 3 Standard (or Phantom 2). All you have to do after 3d printing this object is to cover the front side of the reflector with…
Wall mount for the DJI Phantom 1 and the controller. It was designed with FreeCAD. I hope you like it and it will help y
This is a replica of Yankee Hill Machine's Phantom QD muzzle device, extremely close to the original except from the outside thread, and this is just so that it's compatible with my Turbo T2 suppressor replica. (Here:…
So as you can see it is an F-4. In fact the other bigger F-4 was partly based off of this one.
SCOOBY DOO - PHANTOM (GHOST) - WALL ART
(Original model I designed) Bring a slice of sci-fi mystery to your shelf with the Phantom Sentinel Helmet — a stylized split-face helmet that merges clean, futuristic armor with flowing, ghostly forms. One side features crisp, hard-edge…
Here is the Phantom Hourglass! Designed to fit this Hourglass off amazon. https://www.amazon.com/dp/B0B827JVHV?ref=ppx_yo2ov_dt_b_product_details&th=1 I recommend using guerilla glue hotglue sticks to attach the pieces to the hourglass,…
first of all I wanted a more comfortable grip for bigger hands so I added two brackets on each side, it felt much better already, but then there was a problem with the joycon wire, it was kinda anoying standing out on top and I just didnt…
This is designed to hold a Phantom 4 battery on a different drone. The mounts are designed to fit 10mm rails at roughly 60mm apart. This is designed to take a DJI P4 power board that sits on lugs at the rear. The lugs can be then melted…
Experience the pinnacle of automotive luxury with this exquisite 3D printable model of the Rolls-Royce Phantom, presented in a sophisticated reveal, shrouded in a sleek black cloth. This model is designed for discerning collectors and for…
Magazines found here: Sending as a step file only for now. Might upload the print file later. Odds are someone will want to modify it to take the normal m3 screws. I have and like my #4 screws so I used those everywhere. To be fair it…
Model is a size 9 (19 mm diameter). Every .4mm is half a ring size (9.5 ring size = 19.4 mm diameter). Measure the diameter of the finger you want it on and scale accordingly. No supports needed if printed with the emblem facing down.…
An alternate circular handle to the one provided that allows use further in on a surface/workbench/table. I had to sand the hex slightly to get the handle on, will make a larger version with 1mm of allowance around the hex hole.
Print this model with tree supports in PrusaSlicer if possible, it will save you a lot of print time. This model is for holding 2x 30 business cards, and it is all in a cool looking f4 phantom, that is modelled scale to the real life…
⚠ Check out my new stand, click here! ⚠ Stand for Devialet Phantom II, prints in one piece, no supports needed. Only needs an M5x22 screw I made it to fit an 18cm printer Wide feet for better stability A hole to fit the screw so that the…
Needed a Bracket to mount an iPhone12 with a Quadlock case to my DJI Phantom3 drone controller. just a simple rectangle with the Quadlock case mount to secure the phone phone sitting in Quadlock case was too big for the built in holder,…
Using real airfoils, this site and some declassified NACA documents, I present to you this model. The one in the picture is a prototype, the file will be different. Fits might be tight so beware.
F-4 phantom is a millitary plane used in the war
A bold and elegant 3D model inspired by luxury grand tourers — the Royale Phantom GT combines classic prestige with modern aggression. Featuring wide fenders, deep front grille, sleek proportions and a muscular stance, this concept car is…
I was fixing up my old computer for a friend and found that the buttons had all degraded, so I decided to model some replacements. These worked for me with no binding and smooth movement. To print: !!See photo for orientation!!. You will…
Based on 1911 panels, but no cutouts or relief for slide release, mag release, etc. Fatter than your average grip panel. Added a wrap version with finger grooves. Modded wrap file was "sanded" in Blender. Category: Sport & Outdoors
This is the stock class horizontal feed adapter for the CCI Phantom. Screw is 8-32x5/8" SHCS
"Excellent. Your screams please me." - Springtrap Category: 3D Printing
Use your Phantom 4 or 4 pro to cast your Fishing Bait out in the surf or wherever you Fish. Zip tie this print to the bottom leg of the Phantom 4 in the center. Attach your fishing line to the card. insert the card and the weight holds it…
![[Repost] Assassin's Creed: Unity "Phantom Blade"](https://media.printables.com/media/prints/2e2d9fe4-4893-4c4b-bd29-add971ea9b24/images/10225232_36bee81a-302c-4310-8561-09fb05e5ecaf_383f2f63-de54-46aa-88ce-ec5ffc93dcd4/fade169bb9865a1e9dcf29bd14abd057.jpg)
