Search results: pico

Sort order

1,257 models

P
Printablesdancerdude

Wallplate Bracket / Mount for Caseta by Lutron Pico Remote

I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…

Downloads
747
Likes
68
Rating
4.83
P
PrintablesAdrian Wisst

SKR Pico Voron V0.1 Mount

I designed this SKR Pico mount for the Voron V0.1 cause i couldn't find one as of now. Print same as all other Voron parts for stability. 4 Shells and 30-40% infill out of ABS/ABS+. Mount with VHB Tape as the original SKR Mini E3 Board…

Downloads
558
Likes
36
Rating
5
P
Printablesbkgoodman

Raspberry Pi Pico Snap-Fit Case

Simple, 27 minute print - no supports - just print as-is. There are 2 files, one has no cutouts for pins and the other has them. You can mix-and-match tops and bottoms with and without pins if you'd like.

Downloads
421
Likes
41
Rating
5
P
PrintablesUko

Raspberry Pi Pico Soldering Rack

In case you need to solder header pins to a new Raspberry Pi Pico, here is a handy rack to keep everything in place. Got inspired by this model: https://www.prusaprinters.org/prints/44141-arduino-nano-every-solder-holder

Downloads
238
Likes
51
Rating
5
P
Printableslibewa

Raspberry Pi Pico WH case

Allows BOOTSEL to be pressed and LED to be seen. No extra materials required (except for the Pico WH). Use the original model if you don't have the extra header(s), as this model leaves a hole in the bottom:…

Downloads
183
Likes
8
Rating
5
P
Printableslukash

ChipSHOUTER and PicoEMP CNC Bracket

This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it. Allows for a very flexible Z-axis rough adjustment: You can insert the bracket into…

Downloads
127
Likes
4
Rating
5
P
PrintablesOpenSrcArchery

Raspberry Pi Pico W DHT22 Temperature Sensor Enclosure

This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the…

Downloads
106
Likes
8
Rating
5
P
PrintablesNate the Grater

Charlie the DoorStopicorn

Doorstop modeled after the Youtube series Charlie the Unicorn. Use this to prop open the door to Candy Mountain so you don't get your kidney stolen! Does not have a lot of grip by default, but some hot glue or something else tacky on the…

Downloads
78
Likes
55
Rating
0
P

Picopad Pro case / frame

Simple case / frame for Picopad Pro. 2 versions: with / without text (function of slide switches). Version with text need thinner layer (0,1 - 0,15 mm). Use 2 pcs M2 threaded inserts (CNC kit / Prusa) for video card. https://picopad.eu/…

Downloads
65
Likes
11
Rating
5
P
PrintablesLuccus

Wiznet EVB-Pico2 Case (W6300, W6100, W5500, W5100S)

This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…

Downloads
62
Likes
1
Rating
0

Alpicool GE50 Divider compressor fridge

I needed a divider for the smaller and the bigger part of the fridge, that goods do not fall down. Added cutouts for better ventilation. Printed with PLA at 0.25mm Layer height and 0.4 nozzle.

Downloads
52
Likes
1
Rating
5
P
PrintablesMartin

Raspberry Pi Pico Breakout Board Holder / Trays

Breakout Board https://amzn.eu/d/1lihfyZ

Downloads
50
Likes
5
Rating
0
P
PrintablesTomDD

ZX PicoIF2Lite Interface Case

ZX PicoIF2Lite Interface Case Designed for v1.0 PCB. Case just pushes together but for longer term use recommend a little bit of glue on each corners. The Pico is fully accessible so no need to open the case once all set-up. For details…

Downloads
42
Likes
5
Rating
0
P

System 58: very small boxes "pico" and "nano"; FreeCAD included

These are two very small boxes out of the System 58 collection of sorting boxes. They can be used standalone for small items or they can be used with the smaller inserts to give them even smaller compartments. The sizes are: Nano: outside…

Downloads
20
Likes
2
Rating
0
P
PrintablesTomDD

ZXPicoIF2ROM v1.1PCB Case

Simple case for the ZXPicoIF2ROM v1.1 PCB. Just snaps together and gives full access to the Pico. Details on my GitHub https://github.com/TomDDG/ZXPicoIF2RO

Downloads
19
Likes
0
Rating
0
P
PrintablesGeorge

Raspberry Pi Pico Case

A simple 2 parts snap-fit case for Raspberry Pi Pico. No screws needed. Back of case is open for wires. I use it to connect 2 ADXL345 and do the input shaper in Klipper Print settings: layer: 0.16 or lower perimeters: 3 To connect 2 ADXLs…

Downloads
5,285
Likes
595
Rating
4.97
P
PrintablesGrevTech

Raspberry Pi Pico Case

Raspberry Pi Pico Case. Two versions, one with the pins facing up and one with the pins facing down (pictures only show pins facing up version right now). Make sure you download the correct files because the different versions are not…

Downloads
3,443
Likes
207
Rating
4.77
P
PrintablesCraig D

Pico Squares - small speed squares

A blatant knockoff of Lee Valley's Veritas Pocket Squares (imperial and metric). See https://www.leevalley.com / for the real thing. The tops are chopped off (for ease of printing) so they are actually 1 tick short (ie the 1½" square is…

Downloads
2,919
Likes
941
Rating
4.89
P
Printablesnmattia

Raspberry Pi Pico Case (1 & 2, Wireless)

A case for the Pi Pico, Pico W, Pico 2, Pico 2 W. Supports soldered headers but does not support the official Pico 2 WH (see below for alternatives). Snaps together. Allows the BOOTSEL button to be pressed. Useful when the Pico needs to…

Downloads
2,662
Likes
93
Rating
4.5
P
PrintablesOptimal Objects

Raspberry Pi Pico 2W CAD Reference Model

This is a single component file with enough detail for developing cases, projects, and peripherals for the Pi Pico 2W. This is not a PCB file, nor is it representative of all surface-mount components- many tiny capacitors, etc. were…

Downloads
1,925
Likes
21
Rating
0
P
Printableszerofox3D

Flexo Meshtastic powered node case for Rak WisBlock, HeltecV3, T114, T190, WirelessTracker and RaspberryPi Pico

NOW UPDATED WITH SIMPLER UNIVERSAL POWER SWITCH DESIGN INTRODUCED IN BENDER2 Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro…

Downloads
1,825
Likes
249
Rating
5

Mounting Bracket for Gamecube Picoboot

This is a mount for use with the Raspberry Pi Pico for the Gamecube. Mounts to the right of the original fan, using the original screw. My setup (not the one in the picture) includes the Noctua Fan, and it's mounted into the original…

Downloads
1,675
Likes
84
Rating
5
P
Printablestn00364361

Low-profile DIN Rail Bracket for Raspberry Pi, SKR Pico, and BTT Pi 1.2.

The mounting holes for the BTT Pi 1.2 are measured directly from the STEP file in BTT's GitHub repository, as they differ slightly from a regular Raspberry Pi. To mount the boards, you will need: four M2.5x8 screws (or M2.5x4 when using…

Downloads
1,625
Likes
230
Rating
5
P
Printablesmaximilliampere

Slim modular Raspberry Pi Pico Case

The case consists of two pieces (upper & lower). Every upper part of the case is compatible with every lower part. Just print what fits your application the best :-) Upper part: Covers the top of the Pico where the Raspberry logo and the…

Downloads
1,400
Likes
118
Rating
4.87
P
PrintablesAdam Kimmerly

K6ARK Pico Paddle

BACKGROUND: The Palm Pico Paddle is infamous amongst portable CW operators for its small size, good feel, and cool retractable case. Unfortunately, they have been out of production for years, and they sell for much more than their…

Downloads
1,342
Likes
120
Rating
5
P
PrintablesSad Snifit

Picostation mount for SCPH-5502

A mount for the first version of the Picostation, with direct access to the SD Card slot, bootsel button and activity led. The Picostation must use the feet provided, and seat in a slanted way. This allows for the SD Card to be accessible…

Downloads
1,284
Likes
27
Rating
0
P
Printablesnagrom

Luckfox Pico Pro/Max (RV1106) case & Pico Plus/Mini (RV1103)

Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…

Downloads
1,276
Likes
36
Rating
4.8
P
PrintablesM600

BetaFPV Pavo Pico / Pavo20 / Femto mount for O4 Air Unit (Lite)

The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…

Downloads
1,197
Likes
91
Rating
5
P
PrintablesJohn Doe

UPDATED Pico 4 Increased FOV facial interface gasket v4, now with magnets

The Pico 4 is better in almost anyway than the Quest, it is lighter, better balanced, and has a higher FOV out of the box than I have been able to get with any facial interface for the Quest. The only thing the Quest does better is…

Downloads
1,138
Likes
45
Rating
4
P
PrintablesLWC

"BREACHER" Pico 4 VR magnetic Gunstock

WARNING if you glue in the hexa cup magnets make sure both magnets are physically attached to each other before you apply glue inside the recess and lovering the the top controller holder onto the base. DONT glue the magnets into both…

Downloads
1,062
Likes
120
Rating
5
P
PrintablesEon3D

Pico – 25 min - The Parrot

Bring some tropical cuteness to your collection with Pico! This chubby little parrot is easy to print, full of character, and ready to brighten up your desk, shelf. ✔ Monocolor and Multicolor versions included ✔ Fast print, optimized for…

Downloads
965
Likes
96
Rating
4.9
P
PrintablesChubby Knot

Pickle Nic, Picolas, Nicolas Cage Ornament

I didn't want to pay for a stupid model so I made my mashed together my own.

Downloads
962
Likes
123
Rating
4.9
P
PrintablesJesseCrash

4 Lane Pico MMU Cover (Remix)

Pico MMU Cover (Remix) This is a remix of Nick1 's Pico MMU Cover Set available on Printables. It is designed to work with the 4-lane version of the Pico MMU. Parts Needed EBB42 Board : Amazon 3MM x 3MM x 5MM Heat Set Inserts : Amazon…

Downloads
928
Likes
152
Rating
5
P
PrintablesLWC

Pico 4 magnetic face gasket +comfort +FOV increase + vented

UPDATE 13.12.2022 Added air vents to the gasket, they are designed in a way so its impossible for light to get in. The active cooling on the Pico4 itself is awesome but when the face gasket sits perfectly on your face with the hot air…

Downloads
896
Likes
77
Rating
4.78
P
PrintablesLWC

Pico 4 controller 3D scan

UPDATE: 26.10.2022 After several more tries and different approaches I was finally able to scan it and it does not look like a pile of putty anymore, this is now very usable. Scan turns out to be bigger then the original after printing…

Downloads
830
Likes
34
Rating
0
P
Printableshummi

Pico 4 USB Cable Clip

print using supports designed for 5mm cable but should work for other sizes as its flexible Update: adjusted clip thicknesses to keep shape better

Downloads
830
Likes
76
Rating
4.86
P
PrintablesBurak Fatih

Raspberry Pi Pico / Pico W Case

You don't need any additional part.

Downloads
805
Likes
49
Rating
4.75
P
PrintablesVincent

Raspberry pi pico

Raspbery pi pico model to help the design of cases or more complex models

Downloads
790
Likes
16
Rating
0
P
PrintablesLeynad Jee

Pico 4 passive sound amplifier/enhancer extension

Some say the sound of the new Pico 4 is great with good bass, some say it's rather poor like me. Different opinions it seems, but the biggest difference could be due to different head- and earshapes. The sound-exit of the Pico 4 is too…

Downloads
700
Likes
53
Rating
4.5
P
Printablesnoob_42

Bigtreetech SKR Pico v1.0 Case rev 2 w/ RPI 4B

::edit:: added images of both revised cases printed and mounted stacked with spacer between. rpi case has btt pi4b and cb1 mounted inside (fits perfect but doesn't have headphone jack) and the pico case has a pico board inside as well. so…

Downloads
672
Likes
56
Rating
5
P
Printablestrrevvorr

Lutron Pico Remote Stand Pedestal

Pico remote slides onto the pedestal and clicks in to lock in place. The model also has holes on the bottom to allow for recessed rubber bumpers to give the pedestal some grip on the table surface. As pictured, stand was printed without…

Downloads
670
Likes
50
Rating
5
P

Picopresso Stand and Drip Tray

I couldn't find a proper stand for my Picopresso so I designed my own. Having a stable base make it much easier to manage pressure and even let's you pump one handed! Picopresso fits snug in the stand and doesn't move while in use. The…

Downloads
656
Likes
38
Rating
5
P
PrintablesAMOVFC

stringer pico mmu with 996R servo

WARNING DO NOT USE A 996 SERVO WITH A EBB36/42 YOU WILL KILL YOUR BOARD the 996 servo can draw a peak of 1.5 amps which is enough to fry the 1 amp 5v rail that is found on the big tree tech ebb boards. I just found this out the expensive…

Downloads
579
Likes
104
Rating
5
P
PrintablesVesa

Raspberry Pi Pico Case

There are many like it, but this one is mine.

Downloads
579
Likes
46
Rating
4.67
P
Printablesechterhoff

BETAFPV Pavo Pico Landing Gear

Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…

Downloads
570
Likes
47
Rating
5
P
PrintablesVal's Virtuals

Pico 4 Vive3.0 Tundra tracker mount

this is a low profile mount to affix a Vive tracker 3.0 to your Pico 4. to be used in conjunction with bdunderscore 's OpenVR-SpaceCalibrator that implement “continuous calibration” which make ues of a tracker mounted to the HMD to…

Downloads
561
Likes
22
Rating
5
P
PrintablesBooks

Raspberry Pi Pico

Raspberry Pi Pico model by abdoubouam . Originally uploaded to Blend Swap .

Downloads
555
Likes
26
Rating
4.5
P
PrintablesPatric

Raspberry Pi Pico Case

Description A simple Raspberry Pi Pico case Instructions Print settings : Layer height : 0.16mm Raft : yes Assembly: All pieces should snap together

Downloads
554
Likes
55
Rating
5
P
PrintablesLWC

Pico 4 external light bleed blocker

UPDATE:03.12.2022 Added a version for people with wider faces as some still experienced to much pressure from the blocker on their heads temple area.…

Downloads
553
Likes
62
Rating
5
P
PrintablesNadir @ CN3D

BTT SKR Pico 4010 Fan mount

Later edit: I have added a 20mm tall version i prefer the 25 because i can easily remove/insert the Neopixel and Det Plug for the 20mm version you will need M3x25mm instead of M3x30 If you want to but this Board here is an affiliate link…

Downloads
546
Likes
86
Rating
4.86
P
PrintablesZedLabz

Pico boot stand mount bracket for GameCube mod

Here is a friction fit stand for mounting a Pico inside a GameCube console next to the fan. The stand has option to use M2 x 5MM screws to secure the pico into the mount. The mount fixes into the gamecube using an original screw found in…

Downloads
526
Likes
31
Rating
5
P
Printablesnixkor

Press-Fit Raspberry Pi Pico WH Case (fully protects headers)

This press-fit Raspberry Pi Pico case is made to work with headers, although will work fine without headers. This case was designed to be deep enough to fully protect the GPIO headers pins. There are a few variations of the top depending…

Downloads
488
Likes
26
Rating
5
P
PrintablesClint J.

BETAFPV Pavo Pico Frame for 2s Batteries

This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…

Downloads
487
Likes
31
Rating
5
P
PrintablesM600

BetaFPV Pavo Pico frame duct

Changelog: 2024.01.27 : Add file pavo_pico_duct_with_feet_flanged.stl: Height is +1mm to a total of 6mm Flange the base to +1.5mm all around for added strength and overall stiffness Lightweight replacement frame duct for the BetaFPV Pavo…

Downloads
480
Likes
38
Rating
5
P
PrintablesAhmad Sunardi

Raspberry Pico Case

I made this case for Raspberry Pico, as an ADXL345 portables sensor tool for 3D printer machines

Downloads
476
Likes
48
Rating
5
P
PrintablesDotNetWorker

Raspberry Pi Pico Case - Snapfit, Screwless

Raspberry Pi Pico Case Compatible with the Raspberry Pi Pico Snap fit design - no screws required Quick and easy to print, no supports and minimal size Designed to use minimal filament Screwdriver slot for easy lid lifting/opening Access…

Downloads
448
Likes
62
Rating
5
P
PrintablesScrumpel

Pico 4 Stand

This is a vertical stand for the Pico 4 VR Headset and its Controllers. Split into multiple pieces for easy printing. The highest part is about 20cm high. Pieces slot together with a relatively high amount of play. Needs gluing together…

Downloads
448
Likes
40
Rating
3
P
PrintablesProwlerON

Raspberry Pi Pico case for ADXL345 accelerometer using Cat5e Cable

To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…

Downloads
446
Likes
59
Rating
4.8
P
PrintablesSammy H.

GameCube Fan Pico

Small remix so you can mount a raspberry pi pico for the newly released picoboot. The suggested fan is a Noiseblocker XS-1 but any 50mm x 10mm 12vdc fan will be compatible. v1.1 = redid the model as I had zero experience in CAD when I…

Downloads
429
Likes
52
Rating
0
P
PrintablesLWC

Pico 4 Protective lens Cover

Two lenscaps connected by a stretchable connection, so no matter what IPD you have your pico4 set to, it will still fit and protect your display from sunlight focusing through the lenses and damage the displays. Because they are connected…

Downloads
423
Likes
39
Rating
5
P
PrintablesSetkio

Silicona Limpiador Pico

Silicona Limpiador Pico

Downloads
421
Likes
60
Rating
0
P
Printablesf3g4t0

Pico 4 clip on ear sound passive amplifier closer

I remixed the model, made by Leynad Jee and John Doe, slightly modifying the angle of the part in contact to get even closer. I also provided it already doubled mirrored and oriented ready to print. a brim might be necessary

Downloads
418
Likes
24
Rating
4.67
P
PrintablesNadav

Pico Projector Mount for IKEA MALM Bed

A mount designed to securely hold a Philips PicoPix Max or other pico projector on the headboard of an IKEA MALM bed. Requires absolutely no tools or assembly and rigidly mounts on the headboard of the bed via gravity alone. The PicoPix…

Downloads
415
Likes
88
Rating
0
P
PrintablesDaniel S

Betafpv Pavo Pico O3 Case

Fits Pavo Pico O3 and 6 batteries. (Betafpv and Tattu 2S 450mAh) ! Added version (R4...) with smaller outside radius to enhance printability -Place Supports under the latch part of the Box, so supports needed elsewhere -Glue a small piece…

Downloads
403
Likes
42
Rating
5
P
Printablesadamo000

Sherpa Mini Extruder with PICO MMU Runout filament sensor

You would need to print: Shepa Mini Extruder adapter - only one part and swap from the original (5x M3x5x4 inserts needed for the whole mod) 4 lane adapter with runout sensor (I've printed one from transparent PET) Important information:…

Downloads
397
Likes
86
Rating
5

Pico 4 Babble Mouth Tracker Mount

Project Babble is an open source mouth tracking solution for VR using simple off the shelf cameras. This mount creates a gopro joint that allows for other cameras to be mounted in front of the user's face. Babble Repo:…

Downloads
396
Likes
23
Rating
5
P
PrintablesAurel-14-FR

SKR PICO CASE

This is a usefull electronic case for Rpi + SKR pico. I design this case for my AM8, to mount it on aluminium profil 20x40. If you need other fixture to fixe the case on other size of aluminium profil, ask me. You will need 4 M3 Heat Set…

Downloads
394
Likes
42
Rating
5
P
PrintablesJbcdu87

Raspberry Pico + USB A Case

Wanted to have a case that would fit a Raspberry Pico as well as a male micro usb to male usb a adaptor (like this one: https://thepihut.com/products/raspberry-pi-power-port-micro-usb-adapter ), effectivly acting like a memory stick.…

Downloads
380
Likes
25
Rating
0
P
PrintablesJohn Doe

Pico 4 clip on ear sound guide amplifier

I just made it a little easier to print and install. I also corrected some of the angles for a near seamless transition. From the original designer, “Some say the sound of the new Pico 4 is great with good bass, some say it's rather poor…

Downloads
373
Likes
25
Rating
5
P
Printablesoctosomething

Raspberry Pi Pico Macropad

Remix of VOID9 macropad with 4 columns and encoder . Keycaps are remixed from one of rsheldiii Keycaps and needs support for center piece. Code for CircuitPython can be found on github: https://github.com/Karolis92/pico-macropad

Downloads
370
Likes
133
Rating
5

Raspberry Pi Pico Case

I design this housing for Raspberry Pi Pico. It has a button, so you can still RESET without removing it from the case and includes cutouts for pins. If you need help or you want to be printed this parts or customized in different way,…

Downloads
369
Likes
38
Rating
5
P
PrintablesFlatcurve

Two-way Cover for Picocalc by Clockwork Pi

This is a snug-fitting cover for the picocalc that can cover the screen and keys when not in use, or be snapped into place in reverse, like a graphing calculator. Someone had already designed a cover for this thing, but it didn't snap…

Downloads
364
Likes
30
Rating
4.75
P
PrintablesJuli111111

LH Stinger Pico MMU with PTFE couplers

Mod for the amazing pico MMU from LH exchanged the ecas to ptfe couplers

Downloads
360
Likes
53
Rating
5
P
Printablesmichael mayer

PicoCalc back panel with USB port and back access

If you like my design maybe consider: https://buymeacoffee.com/ironatmmi Update: Improved antenna holder. Update: I have recognized that the boost converter is not necessary. You can directly connect the JST connector to the USB-A Port.…

Downloads
359
Likes
37
Rating
5
P
Printablesmnitschke

Gridfinity - Picopresso

A gridfinity block for storing a picopresso in an expanded state

Downloads
356
Likes
60
Rating
4.8

Lid with pouring spout / Tapa con pico vertedor

Printed in PLA. No need to add supports. You must rotate the model so that the flat sides rest on the bed. For now it is an adhoc solution. The next step will be to update the code so that it can be parameterized and upload the .scad file

Downloads
355
Likes
24
Rating
0
P
Printablesmatarsaed

Pico MMU Toolhead Filament Hub for Ender-3 V3 SE – 4 Line Remix

This is a remix of the Pico MMU Toolhead Filament Hub for Ender-3 V3 SE . The goal was to allow 4 lines of filament to feed into the extruder. 4 separate PTFE channels to guide and stabilize multiple filaments. Compatible with Ender-3 V3…

Downloads
354
Likes
74
Rating
5
P
PrintablesJohn Doe

Pico 4 headset wall mount

Wall mount to hold the Pico 4 by the back of the headset, there is a cut out for the strap, so it can go on either way. Its overkill sturdy so its probably fine with 1mm walls and 10% infill.

Downloads
353
Likes
41
Rating
5
P
Printablescomputer1up

Pico 4 Lens Cover

Quick draft, lens covers for the Pico 4 VR headset

Downloads
343
Likes
26
Rating
4.33
P
PrintablesLWC

Pico 4 Magnetic Tracker mount (Vive Tracker 2.0/ 3.0/ Tundra)

Added a magnetic quick detach mechanism to Val s awesome design. Like this its easy to get the tracker on and off without having to unscrew the tracker from the base. The magnets do not interfere with the pico at all. No problems with the…

Downloads
340
Likes
12
Rating
5
P
Printablesiceshark

Pico from Friday Night Funkin

Pico from Friday Night Funkin. Posing with his gun and ready to be 3d printed. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Overture PLA White Category: Sculptures

Downloads
335
Likes
9
Rating
0
P
PrintablesJennToo

Raspberry Pi Pico Spacer / Standoff

This is a basic spacer for the Raspberry Pi Pico. I'm using it by gluing the spacer to another part, which leaves the Pico still easy to remove. It is meant to be used on the top face of the Pico, and it's the same thickness as the Micro…

Downloads
333
Likes
59
Rating
5
P
Printablesthomasfjen

Ender 3 SKR Pico Mount (for Voron Switchwire Conversion)

SKR Pico mount for a switchwire conversion. When Stacking the Pi onto the Pico you need additional feet for the needed space. Remixed from the SKR Mini E3 mount from boubounokefalos' Ender Switchwire Conversion.…

Downloads
330
Likes
50
Rating
4

VR Gunstock Pico 4

Not a big update. I added an attachment to the butt for ease of positioning. Now you can shoot accurately without a sight.

Downloads
328
Likes
37
Rating
5
P
PrintablesAlanB

Electronics and Wiring Organizer for Voron V0.2 (Raspberry Pi or BTT Pi, SKR Pico)

This 3d printable frame mounts in the electronics bay of the Voron V0.2 using the six screws that hold the panel that separates the electronics bay from the print volume (use 2mm longer screws). NO VHB TAPE is used. It provides mounting…

Downloads
328
Likes
55
Rating
5
P
Printables3DPS

Picopresso stand

The Picopresso coffee maker is great to use and even better if you have a stand so you can squeeze the plunger without moving the unit as you pump and spilling the coffee. The stand also helps to have somewhere to sit the machine once you…

Downloads
327
Likes
22
Rating
4.5
P
Printablesatok

RP2040-Zero enclosure / Picoprobe

Hey, checkout the (much improved) v2 of this model here: https://www.printables.com/model/497020-picoprobe-rp2040-zero-case-v2

Downloads
326
Likes
31
Rating
5
P
PrintablesMP3

Pi Pico GameCube Mount

This is a little bracket I made for holding a Pi Pico inside the GameCube for use with the PicoBoot project. This allows you to have a cleaner, adhesive free install while retaining easy access to the USB port. Requires 2 M2x3 screws.

Downloads
313
Likes
40
Rating
0
P
PrintablesJohnny Grimm

Ender 3 to SKR Pico mounting adapter

Allows the use of existing main board mounting location to mount an SKR Pico V1.0 board, uses existing hardware.

Downloads
312
Likes
33
Rating
4.25
P
PrintablesJason Giroux

Raspberry pi pico macropad

9 key + rotary encoder macropad utilizing a raspberry pi pico Instructions: https://jasongiroux.com/2023/07/16/macro-pad/ code: https://github.com/jaysongiroux/pico-macro-pad

Downloads
309
Likes
135
Rating
5
P
PrintablesVal's Virtuals

Pico 4 Knuckle Strap

/!\ THIS IS A PROTOTYPE, it may not fit your hands, feedback appreciated /!\ the shape, number of parts, part names and functionality might change with future improvements. Recomended print settings : TPU only! shore 95A recomended 0.2mm…

Downloads
307
Likes
61
Rating
4.38
P
PrintablesRetro Frog

PicoGUS soundcard bracket

PicoGUS is a fantastic project to recreate the Gravis Ultrasound soundcard from the early 1990s for DOS PCs by Ian Scott. You can find out more info and how to build your own on author's Github: https://github.com/polpo/picogus Print the…

Downloads
306
Likes
9
Rating
0
P
Printablesatok

Picoprobe (debug probe) - RP2040-Zero case v2

A dedicated case for the smallest usable RP2040 board I could find. It has labels for pins used by Picoprobe and a separate hole for each cable to prevent tangling. It screws together with (up to) 4 M3 14mm screws (and nuts). The project…

Downloads
302
Likes
37
Rating
5
P
PrintablesMogu1lito

V0.2 Umbilical/Picobilical PCB mount for DragonBurner

I like the Picobilical PCB style mount and the angle at which it is mounted. But I don't like the way the PCB is mounted. So I modified the Picobilical PCB mount to fit the Umbilical from the Formbot kit on the DragonBurner. The PCB is…

Downloads
302
Likes
35
Rating
5
P
Printablesch.horisberger

Simplified BetaFPV Pavo Pico / Pavo20 / Femto mount for O4 Air Unit (Lite)

Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross

Downloads
301
Likes
20
Rating
0

PICO CLICK-CLACK

I designed this pocket-sized stress reliever, easy to carry with you everywhere and to use in daily life when you have anxiety or are thoughtful. Immediately after removing the model from the plate, you may need to use some force to…

Downloads
301
Likes
18
Rating
4
P
PrintablesAlex

BTT Pi V1.2 and SKR Pico Bracket for Din rail

I used m3*10 screws (4 pieces) and m3 insert nuts for bracket (4 pieces), m2*6 screws for the board (8 pieces)

Downloads
292
Likes
19
Rating
0
P
Printablestodbot

Pico Label Plate: Pin labels for Pico!

The Pico Label Plate consists of a small 3d printed piece that sits on top of the Pico and provides a surface for a label to be affixed. The included label has all the pins noted, just like the top of a PCB should have. Or just use the…

Downloads
290
Likes
50
Rating
4.8
P
PrintablesVladimír Waas

PicoPad Case

Pages of product picopad.eu . Printed in two material variants. Prusament PLA and ColorFabb XT - clear. (Is possible to use another fileament too.) It is possible to use a nozzle of 0.4-0.6 mm . The lower part is printed with support.…

Downloads
290
Likes
49
Rating
4.73
P
PrintablesRaspberry Pi

Raspberry Pi Pico Iron Man Arc Reactor

Full tutorial available here - https://www.raspberrypi.com/tutorials/raspberry-pi-pico-iron-man-arc-reactor/

Downloads
288
Likes
136
Rating
4