642 models
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
The last check before the start of the new school year revealed chewed 😬 pen caps. Probably a remnant of the stress of the end of the last school year. 😰 Keep calm and don't chew pen caps please. It's not healthy! 🧐 These caps are…
A magnetically mounted pen-holder for the Pilot G2 pen. Uses 6mm diameter magnets that are 3mm thick.
This is a relatively simple autopilot box based on the Kodiak 100. It uses an Arduino Mega for Mobiflight connectivity. More information, and all project and control files, are hosted on GitHub:…
Pen for Pilot G2 refill Print Instructions Print with 0.2mm layer height, with organic support outside the pen (see the 3mf files). Print any material you would like. I recommend printing it with PETG. Assembly Instructions Print one pen…
Watch here for more information! It's time for the classic Ace Pilot Snoopy! This is a 3D modeled and 3D printed version of Snoopy's Pilot form with his house. Hope you like it! Let me know what you think. :) Modeling Software: ZBrush…
modular parts part of XORN Army compatible with other models from collection layer height 0,12mm
I designed this 3D printable bolt action pen for my students, as many of them benefit from having a small sensory fidget tool in the classroom. The pen is designed to work with a Pilot G2 refill, using the original refill and spring. All…
Hi Andre, not the best model I'm afraid, but that was all I have on file. Hope it works for you. And as always check the sizing suits your needs. There is one here if you get it? I'd be happy to help with any conversion of the file if…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
Hi Mikeo, I have gone all out on this one and have a couple more Titan helmets to upload, I've split it as best I could to eliminate as much of the need for support as possible. But you will need some here and there. I've made the whole…
Hello pilot! Here is the 3d printable jumpkit prop I made being inspired by the game. Its still kinda WIP, as I didn't finished mine, but I printed everything and it works. Any edits will be compatible at this point so you can use it as…
This is a simple bolt-action pen that utilizes the Pilot G2 ink cartridges. You can make it single-color, or add an accent strip in the middle. The halves connect with a bayonet latch, which should be easier to print than standard screw…
Star Wars TIE Fighter Pilot Bust Print instructions Printed a 5% infill with supports
Another one of my many requests finally completed, sorry I cant recall whom it was that wanted this, but i guess youll know who you are ; ) Cheers Jace
Pilot Skull Decor – Bone-Chilling Altitude Attitude Take your prints to new heights with this bold and badass Pilot Skull Decor ! Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort.…
Print Settings I printed a few iterations, at .02 mm layer height. The one pictured is not the final model and was printed before I decided to bulk up and smooth out the hanger portion. Consider Your Filament Please be careful with any 3D…
Pilot for RC glider. Remixed from: Glider pilot (rielaboration) https://www.thingiverse.com/thing:3648714 Back To The Future Glasses https://www.thingiverse.com/thing:1731174
Mini AP is a autopilot unit for Flight Simulator 2020 - 3d print the parts, assemble, wire, download Mobiflight from www.mobiflight.com use the Adurino config and preset. Parts required. Pro Micro ATmega32U4 16MHz 5V Micro USB…
A Tie Pilot miniature, suitable for tabletop gaming. Print instructions Category: Sculptures
Hi Harrison, Hopfully this will work so you can seat it in your model. Good luck Cheers Jace https://www.thingiverse.com/thing:1453973
Here's a custon Mando Helemt design of mine. I'd scale it around 480% for a normal sized head. Post a make and check out my other models If you like my work you can buy me a kofi, https://ko-fi.com/reprops Category: Props
A simple holder to store your I-Pilot remote. No supports needed.
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
V2 UPDATE You need: 1 Body (Gray) 1 Rear Cover (Gray) 1 Inset Plate (Black) 3 Buttons (2 Blue, 3 White) 2 Switches (White) 3 Switch Retainers (Any Color) 1 Jack (Silver) 1 Knob (Silver) 1 Switch OR Alternate Switch (Gray) 4 #8 x 3/8" OR…
TEST PILOT OF YOUR IDEAS, CREATIONS AND INVENTIONS HAVE A LOOK TO OTHER HIG DETAILED SOLID MODELS! https://www.cgtrader.com/maxgrueter Category: Sculptures
Added a loop on his head to attach fishing line for hanging. Shrunk it down enough to fit an Anycupic Photon. Included a version that is hollowed with drain holes. Print Settings Printer Brand: Anycubic Printer: Photon Supports: Yes…
My video about this project: Parts used in this project: 1x Mateksys F405-SE Flight Controller 2x Emax RS2205 2300KV Brushless Motor 2x LittleBee-Spring 30A ESC 2x 5045 propellers 2x MG-90S Servo 1x 5V BEC for Servos 1x BN-880 or Holybro…
I have a Option 3 I'm working on as well with the model I belive is from battleFront 3. I will post that where time permits. These options here so far look great. ( Well I think so ) Sizing should be pretty well spot on, but do check it…
This is a set of pieces that can be used to recreate the Luke Skywalker and Dak Ralter Rebel Pilot mini-figures originally published in 1999 as part of the Snowspeeder set at 500% scale. All the stl files needed to make these can be found…
I spent some time cleaning this up as best I could. Thickened the walls for printing and fixed as many mesh errors as I could. has come up well. Just needs slicing now ready for printing but should be a great model to do. Will need to be…
My very first foray into applied 3D modelling, and I'd say it turned out great! Like the title says, this is the “Assault-style” Imperial helmet from Squadrons, useful if you're planning to build the following outfits: Hazard armor and…
This is a set of blocks that can be used to recreate the TIE Fighter / Interceptor Pilot figure at 500% scale. This figure was included as part of the TIE Interceptor set published in 2006 and again in the Imperial Landing Craft set…
So I had a co-worker give me a bolt-action pen for a christmas gift. The pen itself looked nice, but I didn't like the cartridge that was in it. Also, the back end of the pen was pretty heavy and it felt a little awkward to write with. I…
I love Pilot G2 pens, but I also love Rotring mechanical pencils and industrial design. Since I chew my pens (I know gross) I needed a replacement body/holder for my unfinished G2 cartridges/refills. Thus this pen was born; merging…
Small LED remote wall holder. Its good for small remotes about 4cm wide. No supports required during printing. I recommend to use screws to mount it to the wall, or some thick adhesive tape (like 1mm). Print Settings Printer Brand: Prusa…
A 3d printed version of the Garmin GFC 500 made in the style of the Vision Jet for Microsoft Flight Simulator. Will add parts list and wiring info, pictures asap
Z-Axis Visualiser Base + Snoopy = your new best friend. Supports required. Use a Lower layer height for better finish.
I've tried all the other 05 Pilot key fob designs I could find on here, but they've all broken on me. My biggest complaint was that none utilized the 2mm threaded hole in the key "blade" to secure it. My design requires more hardware, but…
Pilota Per Modellini Di Aereo
This is my first attemp to do a little complex model, it is recommended to be printed at least with 185% of scale to make details visible.
Hi everyone! This is my 3D printed Tricopter test platform for Ardupilot FPV setup. More about this project in my video: https://youtu.be/Mi7w18WuLz8 Parts used in this project: 1x Mateksys F405-SE Flight Controller 3x Emax RS2205 2300KV…
This cap was modeled to replace a "Fleshlight Flight" cap that broke and to be easier to screw on and off than the original smooth-sided cap. I read somewhere the "Fleshlight Go" series cases use the same sized threads as the "Flight"…
This aviation-inspired pen holder is designed to capture the spirit of classic pilot jackets and the timeless aesthetic of American air forces, with a strong Top-Gun-like vibe — without direct references. Shaped like a flight jacket with…
Needed to write with a pilot G2 instead of the Cricut Pens. Hope this comes in handy for someone. You need to cut the grip off for it to fit.
This model is compatible with the lego system.
Ned From the Twenty One pilots Music video turned into a keychain Rotate the model to print Category: 2D Art
A bolt action pen that uses a pilot G2, just needs the spring and cartridge from the pen, everything else is 3d printed. Depending on your tolerances the bolt part might need to be sized down or need a drop of glue to work with the block.…
Hello! This model was completely unplanned, in fact i didnt even plan on doing any other figures! But @jonesnet approached me here in DMs and asked if i could make a swimming pilot for his upcoming diorama. And i was like, hmm why not?…
A cheerful little pilot character, requiring no support to print! Tested fine with FDM and plenty of detail to print larger or in resin / other print methods. High: 1,130,000 tris Med: 400,000 tris Low: 136,000 tris
Pilot wings badge for PragueAir, a fictional Czech airline based in Prague.
Happy printing! Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4 *********************************************************************** All Quimicafeina designs are protected…
This is a drop in replacement for the front end of the Rival Pilot. To install, put a 16x1.5mm o-ring (or any 1.5mm thick o-ring that fits) in the o-ring groove on the outside of the tube portion. Put this 3d-printed part inside the…
Hi Jeffrey, Hope this is what you were after ; ) Cheers Jace Check the sizing suits your needs to : )
This is a set of pieces that can be used to recreate the Imperial TIE Fighter Pilot figure at 500% scale. This figure was released in 2015 and appeared in one set: TIE Fighter - UCS . All of the stl files needed to create this have been…
Logo twenty one pilots clancy Pro mmu/AMS. Size: 80 x 80 x 1 mm
Recomiendo una impresión “promedio”. No mayor a 60 mm/seg.
For the base, the “wider” side touches the build plate. For the “click” side, the flat side touches the build plate. No supports needed. Raft optional for bed adhesion
For holding pen nearby notebook. The clip is a perfect fit with “Pilot G-2”
This is an adapter to turn D1 refills into a Pilot G2 Mini refill. I made this to use in my Tactile Turn Bolt Action Mini pen. Print Instructions Print upright. If your print surface doesn't stick very well, use brim. Prusa printers with…
Multiple options for the Nerf Pilot. These have all been printed and tested. Fires well with stock spring, heavier springs will get more FPS. Uses a 90 mm length of 17/32 K&S brass tube as a barrel that sits inside a suppressor looking…
Hi Richard, Finally catching up on my requests. Hope this works for your project. Remeber to check the sizing suits your needs and post some pics of your progress if you do take the project on, Cheers Jace PS the visor is for reference,…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
These are essentially phone VR goggles but designed with a “module bay” for a wifi module for connecting to a phone. I will add more pictures later. Assembled with M2 screws and nuts. Here is what it looks like: Assembly tutorial:
This is a simple barrel adaptor I made for the Nerf Rival Pilot dart gun , which packs a very strong punch for its price. I have a lot of darts, so I made an adaptor that goes in the break-barrel chamber where I can load in a dart instead…
Introduction After hearing the news that Sillybutts was pausing the development of his Silly Shell kit for the Nerf Pilot i decided to try my hand at the same concept: Introducing the SillyPilot! This kit requires minimal modding of the…
I printed this model at 198% size for a 1:4 scale model of a Miles M.2H Hawk Major R/C flying model. I needed a block underneath it with two holes for M3 bolts, so I used the Prusa Slicer to add this feature. I printed with 10% fill to…
My Free Bust of a Pilot Hero which is a part of my newly created Custom Bust Series. Check out all my paid busts and get access to monthly STL's on my Patreon + Commercial License!! Patreon: https://www.patreon.com/Bayfaire/ Patron's also…
This pin fits these 5mm pins. The original has the official key of Bremen (Germany) , but I also made a blank version so you can add your own design (initials or aviation club's logo etc.). Looks best in silk gold or silver. No support…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UPDATE AGAIN: revised scale UPDATE: Added beefy versions of the 1:12 and 1:6 as the normal one prints a little thin in places. Absolute noob 3D modeller back again, this time I made a Tie Pilot blaster (as seen on the Sideshow Exclusive…
Print it on its side so the side profile is the part interfacing with the bed. Then simply stick it to your wall or whiteboard and enjoy!
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
A rifled barrel/shell for the Nerf Rival XXIII-100 Pilot that lets it shoot full and half length darts (and maybe Nerf Hyper balls) Easily removable and prints with no supports. It doesn't matter what material you print it in, but I'd…
Lamy Pens have proprietary ink cartridge refills This file adapts the Pilot G2 Cartridge to fit the Lamy Safari Rollerball Pen Body. This File adapts the Pilot G2 refills that are shorter to fit the Lamy Safari Rollerball Pen Body. This…
I had this in the works for a while, but with so many cool releases of this helmet, I'd sort of lost interest in completing it. Not sure how accurate it is, but at the time it was as close as I could get based on the information…
It si one of the helmets from Clone Wars. Print instructions Category: 3D Printing
Also a big thanks to Smitty & Shader over at the Steam Workshop for there input into this model, https://steamcommunity.com/sharedfiles/filedetails/?id=1319299160 Print instructions Category: 3D Printing
Clone Helmet to with the current theme. Do check the sizing suits your needs before printing. Also a big thanks to Smitty & Shader over at the Steam Workshop for there input into this model,…
Thanks to Jace1969 for the original model. I added the empire logo to the helmet to best represent the original trilogy tie pilot design. I printed my make with 0.16mm layer height (in hind sight i may have opted for a 0.12 layer height),…
This is a pilot seat I designed for the Legacy Aviation (Extreme Flight) Muscle Bipe 54''. It fits the pilot bust that comes with the plane, though I designed it for a custom pilot figure I made. Weight is approx. 8 grams. I recommend…
I made both parts a bit thicker around the thread for better strength and to hide the thread when printed. Every time I printed it, thread was visible. In this edit it is hidden when printed.
Current ammo selection is as follows Ultra Dart (2 versions) Mega Dart (2 versions) Full Length Dart (2 versions) Half Length Dart (2 versions) BoomCo Dart (WIP, still refining)
I recently bought a cheap RC toy tank and I decided to modify it for autonomous and FPV missions. So I removed some of the original components with just the chassis left, and I 3D printed some elements to convert it into a universal RC…
Still early in my learning process but here is this absolute noobs latest model: Imperial crew/pilot code cylinder for cosplay or custom action figures. I have it in 1:1, 1:6 and 1:12 scale options. See my other models for more props and…
The RX-series pilot droid was a line of pilot droids produced by Industrial Automaton. Used around the galaxy - initially for piloting spacecraft but eventually repurposed for a variety of uses - the RX-series of droids were versatile and…
This model is compatible with the lego system.
Just catching up on repairing some of my earlier files ; ) cheers Jace
This is a limit switch carrier that can be added to a Raymarine tiller pilot to prevent the unit from self-destructing in case the motor attempts to drive the unit beyond its physical limits. It needs to be printed in PETG, HT-PLA or…
This is a simple keychain for all of FPV drone pilots out there! Fits perfectly with keys or drone gear bags/cases with zippers. Can be easily scaled to any desirable size.
Printed using a Prusa XL with default PLA settings. Also including an alternate option for Trench with solid text instead of the outlines; if trying to use the logos/titles as negative modifiers instead of different colors, the original…
Canopy with sprue attached. The show Vipers - some had some did not have this feature. Up to you. Also a pilot. Very rough. You will need to tweak it. I cannot guarantee the pilot will fit perfectly.
This model is compatible with the lego system.
Diese Figur ist ca im Massstab 1:35 und ideal für Resin Druck
⊬ a NED twenty one pilots funko pop for all fans! great gift! 21p TØP TOP 21P collectible for me it was very small, just size it up LoL also cut off some of the bottom foot so it would touch and than rotate LOL flashforge adventurer 5m i…
Xiaomi remote wall holder. Its good for xiaomi remotes for Mibox S1 (check the pilot look to be sure if thats for your pilot). No supports required during printing. I recommend to use screws to mount it to the wall, or some thick adhesive…
Blank Pilot and Plow pilot for USA Trains EMD SW2. Versions for Large scale and #1 couplers. Print Settings Rafts: No Supports: Yes Resolution: .1 Infill: 100
