Search results: pip

Sort order

6,194 models

P
Printables3DLabPrint

Piper J-3 CUB

Piper J-3 Cub is the next of new LW Planes – Free for all our customers. Series designed for easy and cheap flying. The build is simple even for a beginner. It’s very low weight, easy assembly and fantastic flight characteristics makes…

Downloads
15,104
Likes
2,381
Rating
4.76
P
PrintablesCalebTimoteo

Super Mario Bros Pot Plants - Pipe, Brick Block & Question Block

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)

Downloads
7,942
Likes
3,216
Rating
4.89
P
PrintablesRyCoFX

Over Engineered Bubble Pipe w/ Stand

If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…

Downloads
3,226
Likes
404
Rating
5
P
Printablesbuchnema

Pipe Insulation / Lagging Cutting Jig

With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…

Downloads
3,188
Likes
825
Rating
5
P
PrintablesM99

Pipe Holder for Intex Pool / Bestway Pool

Holder so that the pipe go straight out of the pool. UPDATE: fix to avoid dirt place under the pipe rounded corners 0,2 UPDATE: (30.08.2019) added 1.4in & 1.5in & 1.6in versions PS: if someone need another dimension, please drop a comment…

Downloads
2,638
Likes
416
Rating
5
P
Printables3D KIMBA

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads

Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…

Downloads
2,124
Likes
471
Rating
4.88
P
PrintablesMrGira

PipBoy 3000

Disclaimer : this model is not mine*, I downloaded it from this page where you can follow further instructions in order to paint it and customize it to be closer to the original model - https://ytec3d.com/pip-boy/ Other than that, this…

Downloads
1,610
Likes
540
Rating
5
P
Printables3D KIMBA

Thread Gauge Tester: A Handy Tool for Measuring BSPP Hydraulic Pipe Threads

Thread Gauge Tester: A Handy Tool for Measuring Hydraulic Pipe Threads Looking for NPT thread testers? You can find them HERE! ***Smaller Size UPDATE*** (July 18, 2024) Added the following measurements: 1/4 inch, 1/8 inch Product…

Downloads
1,561
Likes
345
Rating
5
P
PrintablesMetikumi

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

Downloads
1,361
Likes
148
Rating
5

Piping Bag Tips 🧁

My Rotating Icing Stand to go with it! → https://www.printables.com/model/280087-revolving-cake-stand-for-icing-serving-30cm-12-inc I have a XL set for big cakes and chunky stuff. →…

Downloads
1,334
Likes
138
Rating
4.6
P
PrintablesRC_3DWorks

PVC pipe - broom - etc - wall mount

Sizes: 16, 20, 25, 32, 40 mm M4 mounting screw

Downloads
1,098
Likes
426
Rating
4.6
P
PrintablesMetikumi

Snap-in Pipe Clamps (Rev. B) – 20-200mm – 0.8-5.5in

Welcome to the improved revision of my snap-in pipe clamp design, now with more diameters and additional wall distances! This versatile design is optimized for the FFF process with various filaments, ensuring a quick print without…

Downloads
912
Likes
89
Rating
5
P
PrintablesMiguelB.

sunflower seeds bowl / Bol para pipas, pistachos, etc.

Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…

Downloads
906
Likes
96
Rating
5
P
Printablesfixumdude

Fixum Dude Motors PIP Package Delivery Truck

Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…

Downloads
835
Likes
217
Rating
5
P
Printablestom

Heizkörper Doppelrosette/ Radiator double rosette - Version 3 Abdeckung Heizungsrohr/ Cover heating pipe

Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…

Downloads
751
Likes
55
Rating
5
P
PrintablesRichard Polzer

Parametric Pipe Clamp - Rohrschelle - Quickschelle - Interlocks

I needed some clamps for an unusual PVC pipe I had laying around. So I made this design inspired by our local generic hardware store clamps. It's parametric and can be customized in Fusion 360. The minimum pipe diameter is 16mm. There are…

Downloads
732
Likes
74
Rating
5
P
PrintablesNicG

4 inch (100mm) DWV PVC Pipe Bracket

I use 4 inch DWV PVC pipe to connect my various larger tools to my dust collector in my workshop and needed a bracket to be able to securely mount it to my walls and ceiling. This bracket securely fits around the pipe to hold it in place.…

Downloads
629
Likes
57
Rating
5

Piping Bag Tips XL Size 🎂

My Rotating Icing Stand to go with it! → https://www.printables.com/model/280087-revolving-cake-stand-for-icing-serving-30cm-12-inc I also have a regular size set here! → https://www.printables.com/model/290093-piping-bag-tips How to use:…

Downloads
605
Likes
73
Rating
4.75
P
Printables3D KIMBA

NPT Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Downloads
481
Likes
141
Rating
5
P
Printablesanimatorgeek

Bulgarian Bagpipe (Gajda) (everything but the bag)

Update 5/28/2023: Replaced drone reed tongue with an improved model with better tone. Quick Start If you don't want to read all the text, the quick way to jump in and have a playable instrument (without the bag) is to just make the…

Downloads
428
Likes
124
Rating
5
P
PrintablesUncleFrankSays

UFS-105 Copper Pipe Diameter Gage, External Measurement

This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…

Downloads
398
Likes
28
Rating
0
P
PrintablesAH - X1C

Pipe rosette / cover simple

If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…

Downloads
359
Likes
43
Rating
4.75
P
Printablesfixumdude

Fixum Dude Motors PiP Diesel Train

One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…

Downloads
338
Likes
89
Rating
5
P
PrintablesPGold

Adapter Reducer between 1" to 1/2" NPT threaded pipes

Printed using ePLA. use support as already planned in the attached bgcode file or use your own.

Downloads
310
Likes
41
Rating
0
P
PrintablesAH - X1C

Pipe rosette / cover simple Parametric

If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…

Downloads
302
Likes
35
Rating
5
P
Printables3D KIMBA

BSPP Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Downloads
282
Likes
92
Rating
5
P
Printables_Stacktrace

Reolink Argus3 Camera + Solar Panel mount for rain drain pipe

I wanted to mount the reolink Argus3 camera with it's corresponding solar panel on a 100mm drain pipe. I printed in PETG. Let's see how lang that is going to last in the sun. Material for camera mount: 1 x 20mm M6 screw 1 x M6 hex nut 2 x…

Downloads
271
Likes
22
Rating
0

Pipette stand

Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 3-8 hours, depending on size Slicer settings: 5 perimeters, 0.2mm layer height, print horizontally, use brim Post processing instructions: Clean the…

Downloads
267
Likes
28
Rating
0
P
PrintablesGraswald

Heating pipe cover / Heizungsrosette - Abdeckung für Heizungsrohre

A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…

Downloads
266
Likes
20
Rating
5
P
Printablestom

Abdeckung Heizungsrohr/ Cover heating pipe

Deckt den Übergang von Heizungsrohren zum Fußboden ab. Es sind keine Schrauben nötig. Der Durchmesser der beiden Rohrdurchführungen ist 16mm. Translation DeepL Covers the transition from heating pipes to the floor. Screws are not…

Downloads
255
Likes
25
Rating
4.5
P
Printablesb00g

Flexi Turtle Pope. Very smol, much cute. PiP

Turtle Pope v2 With movable feet and head. Print in place. Some supports might be needed. Gcode included for 0.4 nozzle with var layers and supports. Non standard startt sequence and first layer speed. Makes Turtle Pope v1 obsolete.

Downloads
251
Likes
36
Rating
5
P
PrintablesMike81622

PVC pipe bracket / holder (different sizes)

I recently added a heat pump to our pool, so I had to redo some of the piping and needed some brackets to hold them in place. Off the shelf brackets didn't work so I made my own ones and thought I'd share them, in case someone has the…

Downloads
239
Likes
66
Rating
5
P
PrintablesHoopy

Pipe clamp for DN110 (110 mm) pipe

Purpose: This clamp fits on a DN110 pipe (110 mm outer diameter) and has eight M4 threads to mount things on (4 threads x 2 rows, spaced 40 mm apart). I've designed it to hang an IKEA Skadis pegboard on a pipe in my cellar to put all…

Downloads
223
Likes
31
Rating
5
P
PrintablesConky

3DLabPrint Piper J-3 Cub Separate Block & Separate Valve Covers.

Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.

Downloads
220
Likes
14
Rating
5
P
Printablestom

Heizkörper Doppelrosette/ Radiator double rosette - Version 2 Abdeckung Heizungsrohr/ Cover heating pipe

In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…

Downloads
209
Likes
20
Rating
4.67
P
PrintablesPavel Rampas

Pipe Cap (parametric)

OpenSCAD parametric cap for HTEM and other pipes.

Downloads
180
Likes
22
Rating
5
P
PrintablesRobertusMaximus

Wargame Walls Collapsed Pipes Section 17

Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…

Downloads
176
Likes
36
Rating
0
P
PrintablesPGold

Reducer between 1" male to 1/2" female threaded pipes

Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.

Downloads
168
Likes
23
Rating
5
P
PrintablesPilote NEXUS

[EN] Loaded Die ! [FR] Dé pipé ! [CZ] Nabité kostky ! [DEU] geladene Würfel

[Disclaimer] [FR] Je décline toutes les responsabilité dans le cas où l'utilisation d'un dé pipé Pilote NEXUS serait découverte lors d'une partie de jeu quelle qu’elle soit. [EN] I accept no responsibility in the case where the use of a…

Downloads
161
Likes
16
Rating
0
P
PrintablesMbrinch

Radiator pipe cover

A simple radiator pipe cover, to make a nice finish.

Downloads
145
Likes
27
Rating
5
P
PrintablesLibor Šedivý

Krycí růžice k baterii 3/4" / Pipe rosette for faucet 3/4"

CZ: Tuto růžici (krytku) můžete využít např. k baterii ve sprše, u umyvadla apod. Tvar umožňuje snadno změnit výšku krytky dle vašich individuálních potřeb. Doporučuji použití PETG či jiného teplotně odolnějšího filamentu. Tisknout lze…

Downloads
134
Likes
18
Rating
5
P
Printablestom

Klammern, um Gardena Micro-Drip Verteilerrohr 4,6 mm (3/16") zu bündeln/ Clamps to bundle Gardena Micro-Drip distributor pipe 4.6 mm (3/16")

Mit diesen Klemmen können 2 oder 3 Gardena Micro-Drip Verteilerrohre 4,6 mm (3/16") gebündelt werden. Das System sieht dadurch etwas besser aus. Translation: DeepL These clamps can be used to bundle 2 or 3 Gardena Micro-Drip distributor…

Downloads
132
Likes
31
Rating
5
P
PrintablesJeff Marsh

Conduit/Pipe Clips

A collection of conduit/pipe clips for the following sizes of conduit/pipe. Nominal outer diameter: 20mm, 25mm, 32mm, 42mm and 55mm. Maybe used for both rigid or flexible conduit. The clips may also be clipped to each other, side-by side,…

Downloads
131
Likes
19
Rating
0
P
PrintablesObe_Design

PVC pipe holder 15mm - 20mm

These are 3D-printed PVC pipe mounts, designed to be secured with M3 bolts. They are commonly used in electrical conduit installations and are available in different sizes to fit various pipe diameters. Perfect for mounting pipes to walls…

Downloads
118
Likes
26
Rating
5
P
PrintablesMike Groleau

Piper Aircraft Window Vent Scoop

Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.

Downloads
109
Likes
11
Rating
0
P
Printablesayjay

protective jaws for a vice with holder for round material like pipes - Schonbacken für einen Schraubstock mit Halterung für rundes Material wie Rohre

The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…

Downloads
104
Likes
15
Rating
0
P
Printablessilasborowy

Pipersberg Gaszähler Sensor Halterung

Mit diesem Druck kann ein Magnetsensor optisch ansprechend an einem Pipersberg G4 Gaszähler befestigt werden. Der Druck enthält eine Mulde im Boden, die mittig über der zweiten Nachkommastelle angeordnet ist. Um den Zähler auszulesen muss…

Downloads
100
Likes
6
Rating
5
P
PrintablesChris Inguelph

Blast Gate for 4 inch 100mm sewer pipe

I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…

Downloads
91
Likes
22
Rating
0
P
Printablesjvazac

pH/ORP Probe pipe fittings

pH or ORP probe pipe-drilling / holder. It is designed to keep probe safely in the water. Should be mounted behind filtration system but before heater and any chemistry injection system also. Easy to use, just drill hole into the pipe…

Downloads
87
Likes
9
Rating
0
P
Printablesjvazac

Drilling parts for swimming pool pipe fittings DN50 (2")

2"/D50 pipe fitting for probe/sensor/injector holding onto pipe. It has been made with two typical pipe-threads - G1/2 and G3/4. You can look into my other models, where you can find temperature probe sensor shaft for this fitting or…

Downloads
83
Likes
24
Rating
0
P
Printablesmurphy

2m/70cm Copper Pipe J-Pole Antenna Construction Spacer

These 3d printed spacers make building this dual band copper pipe jpole much easier as explained in the youtube video for this project: The dual JPole itself is amazingly broad band, easy to tune and has a nice low angle radiation pattern…

Downloads
78
Likes
19
Rating
0
P
PrintablesAlvomane

Hooks for 28/30mm pipes | Haken für 28/30mm Rohre

This is a hook that slides onto 28/30mm pipes. Simply scale it to fit other sizes or use the step file for customization Prints the hook in STL orientation with 4 outer layers, 5 top/bottom layers and 25% infill. — I would be very happy…

Downloads
70
Likes
8
Rating
0
P
Printablespaururo

Magnetic Micropipette Holder for Efficient Lab Organization

Unleash the functionality and convenience of 3D printing with our free, custom-designed micropipette holder featuring integrated magnetic inserts. This holder comfortably accommodates 4 magnets of 6x3mm each, ensuring your micropipettes…

Downloads
67
Likes
13
Rating
0
P
Printablesineichen

THE PIPE CUTTER

THE PIPE CUTTER is a useful tool to cut your pipes. Maximal recommended pipe diameter is 40mm. No supports are needed during printing. No screws are needed. You need only 50mm of a carpet knife blade. To get the pipe cutter as intended…

Downloads
63
Likes
43
Rating
0
P
PrintablesSuM.Schiedt

Hydroponic - Rohrhalterung mit wiederverwertbaren Kabelbindern / Pipe holder with recyclable cable ties

Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…

Downloads
61
Likes
5
Rating
0
P
PrintablesMarcus
Downloads
56
Likes
4
Rating
0
P
PrintablesRo3Deee

Optimised Prusa XL side filament bypass - UM2 Quick PTFE Pipe Coupling Collet

Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…

Downloads
55
Likes
10
Rating
5
P
Printablesfluetke

Airduct pipes and bends for extractor hoods

This is a collection of various Pipes and Bends for an extractor hood.

Downloads
54
Likes
7
Rating
5
P
Printablesfreeman

1/2 inch aluminium pipe connector 3 way

3-Way Aluminium Pipe Connector for 1/2-Inch Pipe This 3-way aluminium pipe connector is designed to join three 1/2-inch pipes at 90-degree angles, creating a strong and stable Y-shaped connection. Manufactured from high-quality aluminium,…

Downloads
53
Likes
2
Rating
0
P
Printableszabijak_dadi

Simple Drainage Pipe Cover

I needed a simple drainage pipe cover, but I couldn't find any at my local hardware store. So I swiftly designed one without any supports. The cover is for a drainage pipe with dimensions DN 65 - ⌀ 65 mm. I incorporated an inner circle to…

Downloads
51
Likes
3
Rating
0
P
Printablescmos

Camera-Holder for double display stand - extended pipe clamp webcam mount

extended the length of the original design by ~35mm, and added some more rounding and smoothening

Downloads
50
Likes
7
Rating
0
P
PrintablesIra S

Mount for Conduit, Pipe or HVAC Line Set

I installed a couple of Mini-split HVAC units and needed a way to secure the line set, drain and control cable to the wall. This design will accommodate different size line sets, conduit and piping. It accepts 2 zip-ties to secure the…

Downloads
48
Likes
6
Rating
0
P
PrintablesModelMakers

Doraemon Playground Pipes

Suggested print settings - Pipes : Layer height 0.2mm. Infill 15%. Fuzzy skin feature needed on Outside Walls (3mf file provided): Point distance - 0.1mm. Skin thickness - 0.1mm. No supports needed. Suggested print settings - Base : Layer…

Downloads
48
Likes
9
Rating
0
P
PrintablesRadHare

Pipe Clamp Bracket - 19 mm & 21 mm

Description: This is a 3D-printed pipe clamp bracket designed to hold pipes or rods with diameters of 19 mm and 21 mm . The sturdy design is perfect for organizing cables, mounting pipes, or other DIY projects. It includes a flat base…

Downloads
45
Likes
3
Rating
0
P
Printablesjamesmcgarr

100mm temporary vent pipe cover

This is a temporary 100mm vent pipe cover making a tight friction fit with the pipe. The mesh keeps out insects. The project I used this in can be found here: https://jamesdaniel.github.io/bathroom_vent_project.html. I printed this model…

Downloads
43
Likes
2
Rating
0
P
PrintablesFARO

Angle Adapter thread g1/2 to 18 mm pipe (outer diameter)

Instructions: Best way to print is with the thread facing down You'll need support to print (third picture) Depending on the filament type I'd make 30-50% infill to make it more durable.

Downloads
40
Likes
5
Rating
5
P
PrintablesLobsi

Wall mounted Letters - Font BC Alphapipe

I made these letters for a cool wall-mounted Logo. Maybe you also have a use for said Letters (even though they are quite specific). Let me know if you'd be interested in having a complete Set of Letters of the Alphapipe Font.

Downloads
39
Likes
11
Rating
0
P

Pipe Adapters for Kessil A-Series Mountnig Arm

Allows you to cut and adapt the tubes of the Kessil mounting arm for wire management. Pipes cut easily with standard copper pipe cutter. For my 4 lights I used: 90->T->T->T w/ notch->90 OD to wrap behind Print instructions Print with…

Downloads
38
Likes
14
Rating
0
P
PrintablesHermannSW

Pipe edges tetrahedron phone stand

I wanted to 3Dprint phone stand based on simplest 3D polyhedron, the tetrahedron. It turned out to be too difficult for me doing “pipe edges” with Freecad, so I used OpenSCAD, and was surprised how easy this model was if you get it right…

Downloads
36
Likes
6
Rating
0

ProPipette - luer splip syringes conversion kits

ProPipette conversion kits available The three models currently available are: Kit for 10ml luer slip syringe . 3D printable parts: - Universal spout printed in TPU (This spout works for all luer slip type syringes). - Printed TPU plug…

Downloads
34
Likes
25
Rating
0
P
Printablesjamesmcgarr

100mm vent pipe hood coupler

This coupler connects the inner diameter of a 100mm vent pipe making a tight friction fit. The other side connects a vent cover from the outer wall. The outer part allows some flexibility of the commercial cover so it can be screwed into…

Downloads
33
Likes
3
Rating
0

DODECAHEDRON CORNER LETTICE STRUCTURE FOR PIPES - TUBES 2

LIKE SHARE COMMENT AND LEAVE A TIP OF COURSE this is designed for connecting tubes 50mm OD when printed 1:1 scale, this way you can form large dodecahedron lettice molecule-like structure for kids and silly grownups. it is easily scaled…

Downloads
33
Likes
3
Rating
0
P

DN32 pipe plug

This is temporary plug for DN32 pipe like PE 100 RC. It should tightly fit any plastic pipe with inner diameter 25mm. It is meant for preventing dirt from entering pipe, not for holding any water in. I printed it from PETG, layer 0,2mm, 3…

Downloads
30
Likes
0
Rating
0
P
PrintablesMaxime

FIXING ON PIPE FOR SWIMMING POOL ELECTRICAL BOX

I needed to attach electrical boxes directly to the pipes because i lacked space in a swimming pool filter box ( example photo ). this mounting brackets allows the pipes to be used as a support and to save space and accessibility in a…

Downloads
30
Likes
7
Rating
0
P
PrintablesJC

3/4-14 NPS (National Pipe Straight threads) Funnel.

3/4-14 NPS (National Pipe Straight threads) Funnel. Made for most steel drums with these threads. Will take coffee filter is so desired to filter the oil. (I use it to check for contaminants.) https://a.co/d/caqnBdN Added coffee filter…

Downloads
29
Likes
6
Rating
0
P
PrintablesPcManny

Flexpipe with groove

Flexpipe with groove 16mm

Downloads
27
Likes
5
Rating
0
P
PrintablesPeter Farell

Mesoamerican Pipe

Mesoamerican Pipe

Downloads
23
Likes
5
Rating
0
P
PrintablesWpBarnstormer

British Army Rank Pip

An attempt to replicate the pips worn for rank by officers in the British Army. Used for a recent VE day event. Printed in superfine detail setting and assembled using superglue so the pip could be sewn onto an old uniform. Hand painted…

Downloads
20
Likes
2
Rating
0
P
Printablesdteng

LED Light Pipe and Lens for Original Prusa MMU2S

The LEDs on a stock MMU2S are difficult to see unless looking directly into the holes, especially when viewed from the front with the MMU mounted at the standard angle. These light pipes and lenses disperse the light over a wider angle…

Downloads
18
Likes
4
Rating
0
P
PrintablesJosef Drapák

Krytka pro drenážní trubku DN 50 / Drainage pipe cap DN 50

Výplň 20%, bez podpěr a límce. Materiál PETG

Downloads
16
Likes
0
Rating
0
P

Makeshift Scavenger Pipe Dreads

This was a humorous lil idea i had for the flash hair contest. Materials: ¾ in garden hose Superglue Fishing line Cutting tool The premise is pretty simple. Its fitted for ¾ in garden pipe but can be scaled up using the scale tool and…

Downloads
14
Likes
7
Rating
0
P
PrintablesDon Patrick

Rotrics DexArm Enclosure exhaust pipe coupling

The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…

Downloads
14
Likes
0
Rating
0
P
PrintablesMechatronics

Magnetic Micropipette Holder for Efficient Lab Organization (Embedded Magnets)

This small modification just embeds magnets in an already good design. This will decrease your holder's strength of attachment to the wall but removes the danger of pulling out the magnets if they are improperly glued into the model. If…

Downloads
11
Likes
1
Rating
0

Shortener for 3mm filters for a pipe

Shortener for 3mm filters for a pipe Print the model according to the desired length of the filter. Insert the filters into the slots and cut.

Downloads
11
Likes
1
Rating
0
P
PrintablesSwiftarf

Lilygo T-Sim Pipe Mount

The file has two parts into which the lilygo T-SIM boards will fit. There are a variety of boards with different SIMCOM chips, but all the ones I have seem to fit ok. The parts then locates the board within a 40mm Floplast drainage pipe…

Downloads
2
Likes
0
Rating
0
P
Printablesfixumdude

Fixum Dude Motors PiP Hopper Train Car

This is an expansion car for the free FDM print in place diesel train set available here: https://www.printables.com/model/1431521-fixum-dude-motors-pip-diesel-train Print in place hopper train car with optional removable coal/gravel.…

Likes
9
Rating
5
P
PrintablesLinkDesigns

Hexagon Superfidget - 35 segment PIP design

I've made a couple of designs based on this idea before, but I realized that more segments = more fun, so now there's 35 😂 This design twists, expands, and collapses in a really neat way, and the segments can actually be separated and…

Downloads
18,525
Likes
2,335
Rating
4.89
P
PrintablesWacky3Dprints

Real Scale Super Mario Bros Pipe Desktop Pencil Holder

NEWS related to this model - 8-6-2023 - I created a collection with all my remixes for this model so you can find all the options in one place: https://www.printables.com/@Wacky3Dprints/collections/687008 - 8-6-2023 - I created a new…

Downloads
15,096
Likes
4,339
Rating
4.95
P
Printablesfixumdude

Fixum Dude Motors PIP Jeep

Introducing the FDM (Fixum Dude Motors) print in place Jeep. Based off of the K2_Kevin birthday model ( https://www.printables.com/model/516455-k2_kevin-birthday-model-2023 ). Find the entire FDM Collection of vehicles here:…

Downloads
5,897
Likes
1,252
Rating
4.97
P
PrintablesHugoWhite

Pipe Insulation (Lagging) Cutting Tool – 11 Sizes

Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…

Downloads
5,196
Likes
2,743
Rating
4.85
P
PrintablesMyGeekyMuse

Warp Pipe - Super Mario - Flower pot / planter

Sizes: ø 60 mm x 60 mm (small pipe), ø 60 mm x 90 mm (tall pipe) Used print settings 0.20mm, no supports needed, Prusament PLA Simply Green The bigger version of the pot is in the making - stay tuned.

Downloads
4,943
Likes
2,051
Rating
4.93
P
PrintablesLIBRE hub

Pipette tip (200 µL) sorting device

The 'Elster' Pipette Tip Sorting Device is a clever 3d printed tool designed to quickly sort and transfer 200 µL pipette tips into a storage box, eliminating the laborious task of manually sorting pipette tips. We re-share this device…

Downloads
4,089
Likes
131
Rating
5
P
PrintablesRESTLESS DESIGN

Adjustable Pipe Clamp

This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…

Downloads
3,926
Likes
820
Rating
4.7
P
PrintablesMatthias E.

Flashforge Adventurer 5m Pro Extruder Pipe Guide

An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…

Downloads
3,555
Likes
437
Rating
4.92
P
PrintablesPrinterforge

Pipe drill guide

Introduction Have you ever struggled to drill straight, centered holes in PVC pipes? I know I have! While working on a project that required precision drilling, I quickly realized how challenging it was to drill into smooth, curved…

Downloads
3,425
Likes
1,905
Rating
5
P
Printablestcatca

pipe lagging tool for plumbing

This tool is to cut insulation from copper pipes , for plumbing inner diameter is 50mm, 40mm or 60mm, others on demands. https://youtu.be/nSeCnuHCYws?si=GxC4OOZlfjOlId0S

Downloads
3,353
Likes
2,394
Rating
5
P
PrintablesLinkDesigns

Hexagon Superfidget V2 - 45 Segment PIP Design

Introducing the Hexagon Superfidget V2: Upgraded to 45 segments with improved expanding and twisting action, and 3 sizes available! Print Tips: Especially for the full size fidget, watch your first layer carefully. I recommend slowing the…

Downloads
3,166
Likes
296
Rating
4.93
P
PrintablesCisco3D

PIP Confetti Cannon

Print and Play You can Print the included confetti or use other. How to use: Load confetti into container. Retract container compressing the spring. Carefully close gate latch. Wait ….. wait… push the latch forward and BOOM. ITS…

Downloads
3,038
Likes
1,070
Rating
4.59