Search results: pok

Sort order

5,567 models

P
PrintablesPeter Farell

Blastoise Pokemon

Set the Blastoise Free!!! Blastoise Pokemon : Loose Turret Fixed (1.16.2026)

Downloads
13,620
Likes
1,666
Rating
4.71
P
PrintablesGonz Heredia

Pokeball

Hello again! I had been wanting to make a Pokeball with my printer for a while, and although I had initially thought of using one of the existing models, this time I wanted to make the model from scratch. I was inspired by several of the…

Downloads
12,997
Likes
5,953
Rating
4.86
P
PrintablesNilsGFX

Mewtwo Pokemon

A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!

Downloads
6,698
Likes
760
Rating
4.62
P
PrintablesCalebTimoteo

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Downloads
6,480
Likes
2,482
Rating
5
P
PrintablesMaxstudios

Pikachu Pokémon Figure

NOTE! Im not affialted with Pokémon in any way with this model. I tried making Pikachu from Pokemon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need to…

Downloads
6,327
Likes
452
Rating
4.38
P
PrintablesFC2M3D

Cubone Pokemon Skull Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic Check another version: https://www.printables.com/model/1068118-cubone-pokemon-skull-lowpoly-keychain-remix Check my latest design for Christmas…

Downloads
6,166
Likes
1,216
Rating
4.86
P
PrintablesCalebTimoteo

Bulbasaur - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)

Downloads
4,157
Likes
913
Rating
5
P
Printables3Demon

Pokemon Card Stands

Low poly Pokémon from Generation 3 are now available on Thangs ! 🎉 These models were designed to display Pokémon cards. The card in the stand is tilted back slightly and the area in front of the card is meant for displaying a 3D…

Downloads
3,492
Likes
1,173
Rating
5
P
PrintablesDutchDeveloper

Nintendo switch game cartridge pokeball

This pokeball switch gamecard holder is not only very nice display piece but is aswell very practical! It can hold up to 12 game cartridges. To print yourself one of these fancy pokeballs all you need is a 3d printer (obviously), White ,…

Downloads
2,984
Likes
616
Rating
4.89
P
PrintablesTantalus

Pokemon Booster Pack Dispenser Unit

A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…

Downloads
2,892
Likes
288
Rating
5
P
PrintablesBTR3D

Poker Chips (Dual Color, Dual Side, for all printers)

You can print dual-color, dual-side poker chips very easily. Specially designed not to use support. All you have to do is change the filament 2 times in a print. Chips are 40 mm in size, but you can print any size you want. Chips: 1, 5,…

Downloads
2,602
Likes
262
Rating
4.73
P
PrintablesJD

Pokemon Snorlax Single Extruder - Dual Color

I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…

Downloads
2,294
Likes
630
Rating
4.67
P
PrintablesCalebTimoteo

Oddish - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Downloads
1,897
Likes
518
Rating
5
P
PrintablesMiguel M.

Pokemon Logo Plaque

Description Kid request… This is just a decorative plaque featuring the Pokemon logo. I have included 2 gcodes. The first is a 1 color print. The second is a 2 color print that does not require an MMU, only a color change. STL also…

Downloads
1,867
Likes
329
Rating
4.95
P
PrintablesCalebTimoteo

Charizard - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Downloads
1,647
Likes
503
Rating
4.5
P
PrintablesMuurph

Pokemon TCG Deck Box for sleeved cards

This Pokemon TCG Deck Case is made to store sleeved cards. It holds a 60 cards deck as well as a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in multicollor,…

Downloads
1,454
Likes
264
Rating
4.5
P
PrintablesSigismond0

Pokeball Plus Auto Catch and Spin

This is a little contraption that allows you to hold down the button on your Pokeball Plus, so that you can use it with Pokemon Go and automatically catch anything that triggers it. It's possible to to this with a rubber band or the strap…

Downloads
1,365
Likes
94
Rating
5
P

Pokemon Chess MMU remix

You can print one set in proper colors and the other in shiny versions - or dont, I'm not even your real dad.

Downloads
1,287
Likes
665
Rating
2
P
Printablesromcoromcoromco

Pokemon card 3D box

Box for pokemon card 3D effect

Downloads
1,236
Likes
490
Rating
4.25
P
PrintablesJohan87

Pokeball Switch Cartridge Holder

Not my design, found on Thingiverse: https://www.thingiverse.com/thing:3346103 which is a remix of https://www.thingiverse.com/thing:1615753 // Edit: Not sure but might be the same as…

Downloads
1,196
Likes
190
Rating
4.8
P
PrintablesNautilus Forge

Low-Poly Pokemons - A Door Knob Collection

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
1,127
Likes
369
Rating
5
P
Printableswootje13

Lightweight drip tray for the Pokémon Bulbasaur Planter

Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…

Downloads
1,097
Likes
253
Rating
5
P
PrintablesCalebTimoteo

Charmander - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Downloads
1,073
Likes
451
Rating
5
P
PrintablesMiguel M.

Pokemon Card Box (No MMU)

The lower part of the box is as simple as it gets. just hit print and voila! I print at 0.2 layer height and the pokemon logos on the sides come out great. The multi colored lid on the other hand requires supports and color changes at the…

Downloads
1,042
Likes
139
Rating
5
P
PrintablesCalebTimoteo

Gengar - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
1,038
Likes
342
Rating
0
P
PrintablesPYC3D.ES

MEW POKEMON KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE MEW POKEMON KEYCHAIN Capture the mystical charm of Pokémon with the 'Mew Pokémon Keyring'. This 3D model beautifully depicts Mew, the rare and powerful Psychic-type Pokémon, in a playful…

Downloads
903
Likes
145
Rating
5
P
PrintablesSnuff Klko

Squirtle Pokemon funko POP!

Print & acrylic draw

Downloads
794
Likes
170
Rating
5
P
PrintablesPeter Farell

Meowth Pokemon Go

Meowth Pokemon Go

Downloads
787
Likes
221
Rating
5
P
PrintablesNycat

Pokéball Flexible Coasters – Gotta Print ’Em All! -No MMU

Description Show off your Pokémon fandom with these Pokéball-inspired coasters! Designed with a honeycomb mesh for a flexible, fabric-like look, they’re lightweight, quick to print, and a fun way to decorate your gaming setup or coffee…

Downloads
737
Likes
415
Rating
4.67
P
PrintablesMrozozoz

Pokeball treat toy for cats

This is simple pokeball toy for cats. You fill it up with the treats through the hole. As your cat rolls the ball the treats will fall out of it rewarding the cat. The model consists of 4 parts: two hemispheres, preferably one red and one…

Downloads
729
Likes
361
Rating
4.83
P
PrintablesMrViddy

Harley Davidson Poker Chip Display Frame

Harley-Davidson Poker Chip connectable frame. Great for those collectors! chips are magnetic with thin metal in the middle There are pegs and holes on each side of the pieces to hold them together. These pieces connects together into a…

Downloads
647
Likes
122
Rating
5
P
PrintablesMehTechArt

Poke Charmander

Please click if you appreciate my work :) Bring the fiery spirit of Poke to life with this highly detailed 3D printable model ! Designed for FDM and resin printing, this model captures the essence of the beloved fire-type with precision.…

Downloads
631
Likes
117
Rating
0
P
PrintablesCalebTimoteo

Dugtrio - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Downloads
631
Likes
296
Rating
5
P
PrintablesMaxstudios

Charizard Pokémon Figure

NOTE! Im not affialted with Pokémon in any way with this model. I tried making Charizard from Pokémon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need…

Downloads
614
Likes
88
Rating
5
P
Printables3DNase

collectible card box (Pokemon, Magic, Baseball)

Cardbox with dividers. no supports needed.

Downloads
606
Likes
89
Rating
5
P
PrintablesActualPepperoni

Pokemon Go Plus+ Pokemon go plus plus

I myself designed this device to aid in catching the pokemons Maybe you too, would like to catch the pokemons I printed at .15 mm layer height with organic supports I eliminated my speaker to make room Link to micro switch → Switch There…

Downloads
586
Likes
23
Rating
4.5
P
PrintablesThesBer

Bicycle Spoke / Valve Propeller spin

🚴💨 Spin Your Ride – Bicycle Spoke / Valve Propeller Fun! 🌀 Why just ride when you can fly ? This 3D-printed propeller spoke/valve cover turns your bicycle into a mini aircraft (well… in spirit at least😉). As you ride, the propeller spins…

Downloads
567
Likes
307
Rating
5
P
PrintablesPrintical

Pokéball Display Stand

A Minimalistic and Super Fast Print to showcase your Pokéballs by @yoyothechicken

Downloads
553
Likes
54
Rating
5
P
PrintablesMartin83

Pokemon CARD BOX

Box made of 3 colors of filament, bottom and middle parts glued together. The button is inserted but can also be glued.

Downloads
527
Likes
94
Rating
4.89
P
PrintablesLeoColman

Weed Tool - Poker/Packer and Mini-Shovel

Small Tool with a poking stick on one side and a mini-shovel on the other side. ---- Available in two versions: Short - 75mm Long - 100mm Print Settings Printer brand: Creality Printer: K1 Max Rafts: No Supports: No Resolution: Any…

Downloads
524
Likes
40
Rating
5
P
PrintablesCalebTimoteo

Geodude - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
523
Likes
214
Rating
4.5
P
PrintablesOpenFigure3D

Gastly Pokemon - Multipart

A quick, simple model based on the Pokémon Gastly, made from scratch in Fusion. It's very easy to print, and comes with some alternative versions: Eyes Blank (draw your own with marker). Ideal if your printer can't do the small pupils, or…

Downloads
521
Likes
132
Rating
5
P
PrintablesPYC3D.ES

POKEBALL KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE POKEBALL KEYCHAIN This 3D printed keychain is the perfect accessory for any Pokémon fan. Made with high quality materials and utilizing advanced 3D printing techniques, this keychain…

Downloads
497
Likes
98
Rating
4.5
P
PrintablesFightTheFoo

Hinged & Latching Pokeball Card Box

These deck boxes are hinged and have a latching feature that allows you to open them by pushing the button on the front of the Pokeball. Print a base, top, hinge, and button for all versions. The great ball requires additional “Great Ball…

Downloads
477
Likes
143
Rating
5

Pokemon figures - various heights

Try split model and set higher infill in the "body" Gcodes in multicolor (base + body)

Downloads
472
Likes
93
Rating
4.83
P
PrintablesFC2M3D

Cubone Pokemon Skull Lowpoly Keychain (Remix)

I printed in PLA Infill: 15% Layer Height: 0.20mm Brim: Yes Supports: Yes, organic If you like my work consider Buy me a coffee 😊

Downloads
458
Likes
66
Rating
0
P
PrintablesmoWerk

Photo Card Holder | Picture Frame | Kpop & Pokemon Collectible Cards

Present and display your collectible photo cards in these elegant picture frames Prints without support due to multi parts click connect design 75° angled to mitigate reflections 56mm x 88mm maximum size of the card Separate inner frame…

Downloads
437
Likes
74
Rating
5
P
PrintablesSuper 25

Growlithe Pokemon

Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Orange Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 50 mm height 0 infill 1mm retraction 0.4 Z-hop 50 perimeters speed…

Downloads
434
Likes
89
Rating
0
P
PrintablesCalebTimoteo

Cubone Skull Pot Plant - Pokemon Home Decoration

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
410
Likes
140
Rating
5
P

PokéBall Pencil Holder

This PokéBall-inspired pencil holder is split into separate parts for easy multi-color printing. The button is printed as a standalone piece and should be glued on after printing. The model is designed for three-color printing — either by…

Downloads
378
Likes
251
Rating
5
P
PrintablesSamanthaF

Pokeball Plant Pot

This plant pot snaps together with printed pins, so you don't need a multi-material printer to print it in tri-colour glory! Tolerances: Read me! I have updated the model in March 2024 to add tolerances to the holes after reports of…

Downloads
340
Likes
174
Rating
4.5
P
PrintablesPrintaghoras

Pokémon Energy Tokens

Energy tokens for a custom version of the Wingspan boardgame

Downloads
330
Likes
48
Rating
5
P
PrintablesCalebTimoteo

Squirtle - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Downloads
324
Likes
115
Rating
0
P
PrintablesCalebTimoteo

Cute Pokemon Christmas Ornaments - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)

Downloads
312
Likes
111
Rating
5
P
PrintablesObe_Design

Pokemon Card Sorter / Divider

Make organizing your Pokémon card collection easier than ever with this 3D-printed Pokémon Card Sorter ! Designed to help you quickly separate Holo, Rare, Reverse Holo, Promo, and more , this tool is perfect for sorting large amounts of…

Downloads
311
Likes
101
Rating
5
P
PrintablesRoiku

Pokeballs

I design some PokeBalls on Fusion 360, I made the classic Pokeball, the HonorBall, the SuperBall, the TerraCristal Orbe, the MoonBall and some more Pokeballs are in comming. Settings : 8 % gyroïd infill except for Middle of the Pokeball…

Downloads
304
Likes
58
Rating
5
P
PrintablesCakeman VR

Classic Pokemon Trading Cards Booster Pack- Charizard

I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.

Downloads
282
Likes
55
Rating
0
P
PrintablesObe_Design

Pokemon Stand for Card Toploader

Show off your Pokémon cards in style with our Toploader Card Stand! Perfect for displaying your favorite graded or sleeved cards securely. Download and print your own stand today! Additionally, the logo can be printed separately without…

Downloads
261
Likes
16
Rating
0
P
PrintablesChloeReads

Pokeball

Pokeball that looks great and works equally well as a decoration on your shelf or a prop for cosplay! Fair warning, it does require some soldering knowledge to wire up the electronics! Print Settings used: 0.15mm Layer height 15% infil (I…

Downloads
250
Likes
86
Rating
5
P
PrintablesMuurph

Pokemon TCG Deck Box for unsleeved cards

This Pokemon TCG Deck Case is made to store unsleeved cards. It holds a 60 cards deck in addition of a Pokemon Coin, that usually comes with the official decks. I made some different styles of the Topcases. To print these cases in…

Downloads
234
Likes
48
Rating
4.6
P
PrintablesPeter Farell

MagiKarp : Pokemon

MagiKarp : Pokemon

Downloads
193
Likes
28
Rating
0
P
PrintablesHatchet

Pokemon Go Automator Clip

An automator Clip for the Pokemon GoPlus, so you dont have to press the button for every catch or Pokestop. Print instructions On the Mk3 you can print it with or without supports, both work just fine. I suggest you print it in PETG…

Downloads
191
Likes
38
Rating
5
P
Printables3DHippo

Pokemon Gen 1 Fight Diorama

Relive the nostalgia of the iconic Pokémon battle that started it all with this detailed diorama of Nidorino vs. Gengar! Capturing the intense face-off from the legendary Pokémon Red & Blue intro, this piece brings the battle to life with…

Downloads
181
Likes
30
Rating
0
P
PrintablesCalebTimoteo

Cubone Skull - Pokemon Home Decoration

Any feedback would be greatly appreciated . Home decor Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
165
Likes
40
Rating
0

Pokeball Keychain

Pokeball Keychain

Downloads
157
Likes
51
Rating
0
P
PrintablesP-atix

Pokémon Starmie 608 bearing spinner

Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports

Downloads
128
Likes
44
Rating
5
P
PrintablesCalebTimoteo

Charmander Low Poly - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)

Downloads
125
Likes
28
Rating
0
P
PrintablesPYC3D.ES

BULBASAUR DITTO POKEMON KEYCHAIN

PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE BULBASAUR DITTO KEYCHAIN This 3D printed keychain is the perfect accessory for any Pokémon fan. Made with high quality materials and utilizing advanced 3D printing techniques, this…

Downloads
118
Likes
23
Rating
5
P
PrintablesTwirlygrlandMom

Queen of Hearts Power Outlet Cover - Alice in Wonderland Wall Decor and Decoration for gaming room, office design, poker playing card

We remixed this outlet cover to match the decor in our home. It would be perfect for a gaming room or a retro or vintage room. Print Queen side up with supports – I like snug supports for this. If you are worried about finish, depending…

Downloads
118
Likes
58
Rating
4

Pokemon TCG Deck Box for Sleeved Cards - Dual Material

Remix of Deck box but modified to use two colors instead of inset design.

Downloads
110
Likes
20
Rating
0
P
PrintablesTomasíno

pokemon applin flexy

figurka pokémona applina

Downloads
102
Likes
7
Rating
0
P
PrintablesPeter Farell

Horsea : Pokemon

Horsea : Pokemon

Downloads
100
Likes
20
Rating
0
P
PrintablesPosterBored

Megacom DuoMon Pokeball Case

The case is intended to include the silicon cover that comes with the Megacom DuoMon as an additional protective buffer. It turned out just as I'd hoped. Enjoy!

Downloads
97
Likes
6
Rating
5
P
PrintablesCalebTimoteo

Mankey & Primeape Low Poly - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
92
Likes
38
Rating
0
P
PrintablesCalebTimoteo

Golduck - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Downloads
89
Likes
41
Rating
0
P
PrintablesTomasíno

pokémon gigantamax mowth flexi

pokémon gigantamax mowth klíčenka

Downloads
87
Likes
9
Rating
0
P
PrintablesSnake

Beste Lehrerin Pokal

Pokal für die beste Lehrerin!

Downloads
76
Likes
5
Rating
0
P
PrintablesTwentySix2

Aero Bladed Bicycle Spoke Holder

I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90…

Downloads
75
Likes
0
Rating
0
P
PrintablesPeter Farell

Antigravity Agent Produced 3d Pokémon Figurine.

Complete AI workflow in antigravity. Agent produced workflow - agent fixed model - I had to slice it... but that is probably solvable as well. The real magic happens with the strict json file it creates for a prompt so all orthos are…

Downloads
63
Likes
15
Rating
0
P
PrintablesPeter Farell

Mega Mew Two : Pokemon

Mega Mew Two : Pokemon

Downloads
59
Likes
21
Rating
0
P
PrintablesKamil

Cat eye bicycle spoke reflector

This is a model based on the vintage Japanese Cat Eye RR-250-WU wheel reflectors. They aren't easy to find anymore, so I decided to make my own. The model is fully parametric, so you should be able to scale it to your desired dimensions.…

Downloads
43
Likes
3
Rating
0
P
PrintablesSebastian Helm

Wabeco 3-Spoke Hub

Wabeco 3-Spoke Hub: I created a 3-Spoke Hub for my Wabeco drill stand with the aim to use the original 25 mm mount of the standard feed lever. The part where the spokes are sitting is 50mm in diameter and the spokes themselves are 13,2mm.…

Downloads
42
Likes
9
Rating
0
P
Printablesdym801

Boite de cartes Pokemon (MMU)

Une boite personnalisée pour les cartes Pokemon

Downloads
37
Likes
8
Rating
0
P
PrintablesDenholm365

Pokefuta Meowth ( pokemon manhole )

This is a fanart replica of Meowth pokefuta. Full design process is decribed in attached picture, from the 2D on pokefuta's listing available here : https://local.pokemon.jp/en/manhole/ This is a very fun and satisfying creation process,…

Downloads
34
Likes
7
Rating
0
P
PrintablesPreischl 3D

Pokestop Extruder Visualizer

Pokestop Extruder Visualizer Hey maker! 👋 Add a fun and practical touch to your printer with this Pokestop-style extruder visualizer. Features: Easy to mount using two 8mm x 3mm magnets (4mm also works). Stays securely in place while…

Downloads
28
Likes
13
Rating
4
P
PrintablesGradyMakes

Pokemon Flip-Token

A Pokemon Flip-Token, with a ridges and Poke-ball on cover, and a blank back side.

Downloads
26
Likes
3
Rating
0
P
PrintablesLancelot

Ravensburger Pokemon Labyrinth Boardgame Figure Base Stand

Kids broke the base for the figurines of the Ravensburger Labyrinth Board Game. Quickly designed this alternative in Blender. It should work for other themed board games where the paper is the same (aprox. 1mm thick). I've printed it…

Downloads
25
Likes
3
Rating
0
P
Printablesh2odragon

Nicht Gefingerpoken sign

100x160mm sign reminiscent of the classic Blinkenlights text. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.

Downloads
19
Likes
2
Rating
5
P
PrintablesRay Fox

Spokey Pete

Pumpkin Witch

Downloads
16
Likes
3
Rating
0
P
Printablesmach

PSU Poke Protection

Simple PSU cover. Prints without support. For use with 3mm countersunk screws.

Downloads
13
Likes
4
Rating
0
P
PrintablesElias

Pokal für die beste Mutter auf Erden!

Hier handelt es sich um eien Pokal, der die Inschrift ,, The best Mum I ever had!'' trägt. Ich empfehle, beim Drucken Support auszuwählen, um ein besseres Ergebnis zu erzielen. PS: Die Zeichen neben dem Pokal in der Modelldatei einfach…

Downloads
11
Likes
0
Rating
0
P
PrintablesJakub Hlavatý

Plant support for indoor plants / podpůrná konstrukce pro pokojovky

Plant support frame that consists of 2 or more printed "rings", 4 wooden poles (mine are 22mm thick) held together with small wood screws (3x10mm). Diameter including the wooden poles is about 15cm so your plant pot needs to be a bit…

Downloads
8
Likes
7
Rating
0
P
PrintablesMichal Zedník

Válec pro pokusy s hydrostatickým tlakem (hydrostatic pressure)

Demonstrace závislosti hydrostatického tlaku na hloubce pod hladinou. Plus dva nástavce (se stejnou výškou) pro zvětšení tlaku. Demonstration of the dependence of hydrostatic pressure on depth below the surface. Plus two extensions (of…

Downloads
7
Likes
1
Rating
0
P
Printablesthomergil

Bama Recycling Bin ("Poker") lid

A replacement lid for the Bama recycling bin (curiously called "Poker"). This model is slightly rounded in all dimensions, making it hard to print. To print it nicely, print this model on its side, standing upright with organic support.…

Downloads
1
Likes
1
Rating
0
P
PrintablesPeter Farell

Yveltal : Pokémon

Yveltal : Pokémon

Likes
8
Rating
0
P
PrintablesPatrickart.hk

Charizard(Pokemon)

Charizard(Pokemon)

Downloads
32,629
Likes
4,668
Rating
4.85
P
PrintablesPatrickart.hk

Bulbasaur(Pokemon)

Bulbasaur(Pokemon)

Downloads
21,459
Likes
2,582
Rating
4.97
P
PrintablesPatrickart.hk

Eevee(Pokemon)

Eevee(Pokemon)

Downloads
20,962
Likes
3,623
Rating
4.96
P
PrintablesP4trik

Cubone Pokemon Skull

Cubone Pokemon Skull For all Pokemon Lovers How To Print Since I have a small printer I printed the model in a mini version , if you would like to use this model as a helmet there shouldn't be a problem and just make it bigger in slicer…

Downloads
18,830
Likes
3,216
Rating
4.97
P
PrintablesMario37

Pokemon Keychain

Pokemon keychains of Bulsbasur, Charmander, Squirtle and Pikachu based on the menu sprites of Brilliant Diamond and Shining Pearl to get the best results enable ironing and play with the settings, what worked best for me was a layer…

Downloads
18,642
Likes
3,647
Rating
4.86