1,685 models
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
Dremel 3000 table saw. 2 main parts, the base where the Dremel is fixed in by means of a quick tension bracket and the table saw with accessories. In the design I have deliberately opted for an easy-to-stop bracket in which the Dremel is…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Here is my design of a Europe map. You can either use this as a game, a puzzle or for educational purposes. Note that this is the geographical Europe (not the political). You will find the country names on the back side. I used the…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Nozzle 0,4, 0,2 mm, 20% Infil, Printed in PLA, if you want it harder you should use PET First version 2 mm strong Second Version 3 mm strong
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant
This is a statue of Troupe Leader Grimm from the game Hollow Knight that can be multi-color printed with any 3D printer provided you have the filament. Again, NO MULTI-COLOR PRINTER REQUIRED, the different colors are at different heights,…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Raspberry Pi5 case with the cpu cooler fully exposed
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Update 4-4-2023: I finally finished my remix of the black core: US Amazon Prusacaster Core UPDATE 03-05-2023: actively printing a test print to see if parts fit properly. For fun I made a Ditto: UPDATE 03-04-2023: I made a negative of for…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
Feyd-Rautha Pose from Dune 2 - Fix and Re-Sculpt. I will keep this in the free area. I am not 100% confident with the fix. The model itself from andrdudka is awesome as fan art, but it had multiple issues for printing. And I was blowing…
Print approx. €15.69–€19.18 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
A multipurpose bowl with a diameter of 90mm and a height of 40mm. You can scale it as you wish. I printed at 30mm height x 90mm diameter and it was perfect. I prepared the impression to give it 3 passes of Flexible at the beginning to…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…
Print approx. €12.10–€14.79 excl. taxPreliminary estimate for one variant
I designed this lantern when we needed a quick and simple St. Martin lantern for our little one — and I wanted to see how such a project could be made efficiently and with minimal material using a 3D printer. The result is a versatile…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
A simple clock for educational purposes (free needles) PLA, 0.2 layer height, 2 colors without MMU
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
A nice small project with some moving parts and a nice model to show what is possible with your 3D printer. You dont need to press this clip closure to open it, only turn the knob 45 degrees to the right (this releases the inner part) and…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
I was asked to help some students at a lokal shool to improove their 3D printing skills. So I printed a Hotend model and packed some of my prined parts. But I was still missing something to show many of the cool features that are…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
This is a modified version of the solder flux paste holder which I made as part of the Solderwire Station side-mounted add-ons. ( https://www.thingiverse.com/thing:3546062 ) The wall of the holder is slightly thinner than that of the…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
Use this if you want to do a z-transpose of a Z-chain you got from an LDO Rev D Voron 2.4 kit, and want the chain to sit flush and level, without any bending of the chain.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
This is a detailed 3D model of the Thermomix TM7, designed not only as a display piece but also as a creative top section for small cacti or other miniature plants. The model can be scaled easily to fit different printers or decorative…
Print approx. €5.86–€7.17 excl. taxPreliminary estimate for one variant
Print and push-fit into place, or use as the basis for other uses for these often discarded vape devices. I dislike seeing these “disposable” devices thrown on the ground or into the trash and often pick them up as they contain a…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
100x160mm sign, with text reading “Expose Yourself to Art” and image of a person opening their trench coat to a framed painting on a wall. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Build your skeletal army! This model features a highly poseable skeleton figure as well as an imposing suite of weapons. Printing and assembly For best results, print the skeleton parts in ASA. PETG is all right too. PLA for the skeleton…
***Update: 15.07.2024 - Add STL data*** Hello print enthusiasts, here you can find the first version of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
Subscribe Now! A very good model from Velrock. Yet another remix pose Time-lapse print video : https://youtu.be/xsk3FDa-Cx8 Baby Yoda : https://www.thingiverse.com/make:872409 Live print in progress. Subscribe to find out more support…
This is my first attempt at an articulating hand model. It will do most poses that a human could do with their own hand. It might be useful as a drawing aid, but really I just think it is fun to play with. All the parts work for the left…
Bring some playful holiday magic to your home with this adorable Flexi Christmas Lizard — a fully poseable 3D-printed toy with smooth segment articulation and a charming festive look. Designed in a bright green color with oversized…
Hello print friends, as some people have requested, you will find now the “ right hand version ” of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
Subscribe Now! Time-lapse print video : https://youtu.be/F1pj7ACaZ70 Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
The other dummy 13 posable hands and fingers didn't work well at 200 percent scale, the fingers were too spaced out, and you couldn't reliably print them with a .4mm nozzle. I used an older model as a guide but I designed these fingers…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
Multi Tool Holder for the HSW Compact tool holder that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. To hold cylindrical tools with diameter from Ø3mm to Ø30mm. Holder Dimension This holder is designed to…
I design the model based omnidroid v08 in the movie. Obviously its not 100% replica since I had to modify few part to make it the model reasonably movable. The legs, claws and ball shoulders and head are movable. There are five parts in…
*** Yet another pose here: https://www.thingiverse.com/thing:4672484 Subscribe Now! A very good model from Velrock. Time-lapse print video : https://youtu.be/4lXVR1HwAAU Remix to support free and printed. (Updated to…
This is a waste container I design to use for multiple propouses like bambulab X1/P1 waste, pencil holder, store boxes… and other propouse you can give it. In the following steps, I'll explain what you need to do to assemble the…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
I've remodeled the adapter from scratch because my old adapter ( https://www.printables.com/model/98138-battery-adapter-einhell-power-x-change-general-pur ), that was based on another design, has some issues. You will also need: 2 crimp…
Instructions & Tips Print SF2 SB2 and SB3 parts using brim Printing the bones out of PETG gave me better results, PLA also does the job Use exploded view of skeleton and assemble 4. Glue fur parts on the skeleton start with the big pieces…
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
this is a batman i found on the web. thot u might like to print it. inches. Category: Sculptures
This is a support-free, FDM-friendly remix of the Goku model by JulioCesar-3DD. Original Model: cults3d.com/en/3d-model/game/goku-juliocesar_ No supports are required anywhere in this remix and it can be printed very easily. Check out the…
Super Strong for tough tasks 5mm holes for standard 4mm paracord / ropes I plan to make 2 paracord handles attached with 4 clips for my bag. There are just so many possibilities with it, use for whatever you want. 😎 // Print with no…
EMPLOYEE BALLIN' FREE MODEL Models height ~ 5.1 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) Please share your makes! I would love to see them! 3D…
Summer is at our doorstep. At some point, I thought of making a small pocket fan. But after it was built I thought there was more potential. Not only does it keep me cool, but it also cools my camera during summer outdoor use and can also…
0-waste: a multipurpose robot This kind of remotely controlled robot is highly appreciated for its easy of use, low mantenaince and cost effectiveness. Although not particularly advanced, it is often preferred to more sophisticated…
Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
Rozměry jsou přibližné podle fotografie originálního nástavce. Zajištění pomocí šroubu M6. Matice lze vsounout volně, hlavu šroubu je lepší nahřát vtisknout za tepla. Vítám případné připomínky, udělám změny :) Tisk bez podpěr.
A set to catch Kobra 3 poop between the filament changes. It's designed to require a tied installation. To set it up, disassemble the purge wiper and untie the screw that holds the plastic purger guide (marked as X on the second image).…
*April 23, 2025 update: - added ‘case-front-cutout-thin.3mf’. It's the same as 'case-front-cutout' but has a thinner face, so the numbers can be easily seen from a steeper angle. I wanted a counter that went higher than 9, so I made this…
Also remixed to multicolour. Subscribe Now! A very good model from Velrock. Remix to support free and printed. If you are looking for Baby Yoda remix in this print: https://www.thingiverse.com/make:872409 Time-lapse print video : Resin :…
11 in 1 - Workshop Multipurpose Tool Features : Scale - 55mm Screw / Bolt Length Gauge M series - Bolt Size Gauge - 1 / 2 / 2.5 / 3 / 4 / 5 Screwdriver + Bit Holder (BIG) Screwdriver + Bit Holder (small) Allen Key Size Gauge + handle…
I used silver PETG to print it, and added black paint. Since paint does not adhere to PETG well, I covered it in Modpodge. For the wires I used bits of filament and hot glue.
Shelves have 2 sizes, 5 hexes wide and 3. Pattern is half the size of the main wall system.
Bonus tip: Flipping prints on the X axis and minor resizing does not change printability but can help you make a bigger army with the same number of files! Wonderfully painted minis by Amorrah
Spyro the Dragon rendered 3D model from the "Spyro reignited trilogy" in a sitting pose / waiting pose + Keychain buddy version. I was asked: "Hey can you make a smooth and compact pose for the use as a key-chain buddy". The blender…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I designed this basket so that it can be used for different things, I use it in the office, in the living room, in the kitchen and in all the places that my wife allows me :) This model started from a very basic object and after edit so…
Designed to be a visually attractive desktop display for a doctor friend. Bones have a duct inside for a thin wire (~0.6mm) to be inserted, forming an armature that can be used to pose the skeleton. Skeleton is CT scanned - though minor…
spider-man super poseable
This Time i modelled an UNDERWATER POSE ! This was a request from a good friend who wanted to print some Poses. --------------------------------------------------------------------------------------------------------------- But do you…
Introducing: Omega-Man! The fully poseable action figure! Omega-man features 14 points of articulation, and can be made from mostly PLA. The Omega connectors should be made from something more wear-resistant like PETG, ASA, or ABS to…
I've included two version of the model. One is a low poly version which was ripped straight from the game files. The other is a subdivided version of the same model.
Description: My Voron 2.4 uses a Nighthawk SB toolhead board. Due to the cable thickness and exit direction from the board, the loop from the board to the lower strain relief mount either needs to be bent quite tightly or have extra room…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
Inspired by ishikawats Articulated Roach: https://www.printables.com/model/1435384-articulated-roach I wanted to make a less...controversial insect. I recommend: Good bed adhesion! 0.25 layer height is fine Fresh filament (old ones might…
This is a minimalistic model I made in Tinkercad for a poseable dragon. I was inspired by Dragon action figure and Stormcleaver Dragon . If you want to print the parts individually or make changes you can find my V1 Tinkercad files here…
Crown worn by loki in the season 2 finale. After not being able to find any models of this crown for free, I decided to make one myself. This project took at least 15 hours. Made in fusion 360. Files include split version for printing and…
¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
Subscribe Now! A very good model from Velrock. Yet another remix pose Resin Time-lapse print video : https://youtu.be/MUwXdUdHs64 (My FDM is under reconstruction. Will do later.) Filename with "FDM" come with a thicker spear. Subscribe to…
This tool securely holds replaceable plastic and metal scraper blades. In addition to cleaning plastic or resin from 3D print beds, it can remove tape, stickers, dried residue, flaky paint or coatings, gaskets, … It is also great at…
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
Include two versions of the file one which was ripped straight from the fallout 76 game files and one that's been heavily subdivided using Blender.
A simple and durable S-Hook that is also easy and fast to print! The hook on the picture was printed with Polymaker PolyTerra Sunrise Orange filament. The print is plenty durable printed in this material, but printing it in for example…
There is only one thing stronger than a single soldier: the power of friendship! Friendship with who? Other giant space soldiers of course. Channel the power of friendship as you fight across the stars and your tabletop with these…
General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…
I've included a low poly version that was ripped straight from the game files and a subdivided version.
🇬🇷 Καλώς ήρθατε στο Σούνιο Welcome to Cape Sounion, Greece! This model was created by MiniWorld3D founder and lead 3D artist Dany Sánchez . The ancient Greek Temple of Poseidon is one of the major monuments from the Golden Age of Athens.…
This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…
This multi purpose hook can be adapted to all kind of doors due to its parametric design using attached OpenScad file. Generate your own personalized *.stl files, slice and print in less than 1 hour! Good retention and permitted load with…
Simple moza es wheel designed after the 12 inch rim mod, meant to be used as a basis for other custom wheel rims.
Here we have some fully customizable general purpose handles. There are two variants: one with a single screw fixing point and one with dual screw fixing points. We really like guppyk's Handle - All Purpose, Four Sizes , but we needed…
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
🧾 Description A simple and highly effective scraper designed for cleaning cutting boards, butcher blocks, and kitchen surfaces. This tool easily removes food residue, grease, and dirt without damaging the surface. Its ergonomic shape fits…
UPDATE: recommend this sliced version instead: https://www.thingiverse.com/thing:3936411 Another rip from Monster Hunter: World Fun Fact: Feed him with any kind of meat to make him glow (and berserk, see render) Contains few overlaps from…
Workbench Stackable Multi-purpose Storage Bins Use For Store .... thanks to FESTOOL for this contest
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
Helps you stack two or more IKEA LACK tables on each other without screws, and with Logo Prusa. Vous permettez de superposer des table Ikea (Lack) sans vises, et avec le logo de Prusa ;).
This is a fully articulated 3D printed fox with flexible joints that allow smooth movement of the body, legs, and tail. Designed for easy printing without supports, it can be printed in on piece. The model is perfect as a fidget toy, desk…
Universal tool for taking measures and making marks on rectangular objects. Contains both metric and imperial units. Ideal for wood workers, but also usable on plastic, metal or many other materials. Also contains templates to mark…
When my Friends and family members ask about what else can be 3d printed that isn´t a toy, (I mostly print toys and puzzles at home) I show them what I print for work, (mostly tools and gages) that's why this little and useful item came…
Spyro the Dragon in a customized pose showing the "okay" emoji 👌 Background: Between the Brother of my Wife and my Wife there is a running gag (I guess many people should know this gag from their days as a child :) where you should not…
This is a Pet Poop Dispenser featuring a 6-arm crawling grab system that mechanically picks up pet waste with a simple squeeze motion. The arms pull inward together, making cleanup quick, clean, and hands-free. All printing orientations…
this is a pose-able figure use petg for best results you are free to make other versions but please give credit
Hello I would love to share my first creation for 3d printing. I was trying to make cartoon version of my Cat for my girfriend. Maybe someone will find it cute to share it with significat other :)
A collection of 3 minimalist stick figures in different poses, designed for easy and clean 3D printing. These models are flat with a slight thickness, making them perfect for decoration, keychains, magnets, educational projects, crafts,…
Part of a FREE 3D-printable miniatures project you can find at https://www.patreon.com/DungeonWardenMiniatures Your support is vital to the survival of this project. Thank you :) FDM-compatible (the smaller the nozzle, the better the…
This is a weights rack inspired by your neighbourhood gym in desk-size for your pens to show off just how much you love to lift pens while at work. The model files are in the right orientation for printing and do not require any…
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
