Search results: pote

Sort order

465 models

P
Printablesquattro

Potentiometer Case

Just a simple box to encase a potentiometer in and run a 5mm cable through. The lid is held in place by 4x M3x10mm screws ¹. The design is tailored for a layer height of 0.15mm. The holes for the screws are designed to be printed upside…

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
7
Rating
0
P
PrintablesLennY5420

Holder for the Potensic Battery Charger

This is a holder for the Potensic Atom Batteriecharger. You can hang it on the Wall or Where ever you want: [When it don't fit] Introduction: 1. Print it 2. Take a Hairdryer and heat the front of the Model 3. Take the Charger and press it…

Print approx. €6.29–€7.68 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
4
Rating
4
P
PrintablesRasmus Additive

Potentiometer knob collection

Print settings : 20% infill 3 walls

Downloads
4,581
Likes
554
Rating
4.83
P
PrintablesLudvig Broomé

Potentiometer 3D Model (STP)

3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.

Downloads
3,831
Likes
55
Rating
4.75
P
Printablesmrusk

Potentiometer Knob

A Knob with knurled surface for Potentiometers with 6mm round axle. Slim 15mm diameter design. Prints well on an FDM printer with 0.1mm layer height. Ironing for the top surface is recommended. Print with shaft side downwards and colour…

Downloads
2,627
Likes
179
Rating
5
P
PrintablesRasmus Additive

Potentiometer knob collection v2

Knobs to use on a potentiometer to make it easier to use and give it a better look

Downloads
1,802
Likes
184
Rating
5
P
PrintablesBobino

TINY rugged box - HUGE potential

The main difference between this box and so many others is more robust locks and hinges, that do not break so easily. Additional hardware: 3x M3x35 mm bolts (hinge, lock) Printing: Easy print, no supports, at least 3 perimeters. I prefer…

Downloads
1,465
Likes
508
Rating
4.8

Potentiometer Knobs

-Material: ~ 2gm -Printing time: ~ 0.2 hrs -Recommended quality: 0.2mm -Dimensions: 22 x 22 x 12 mm If you like my work, don't forget to buy me a coffe ☕ You can also follow me on my social networks: Linktree: https://linktr.ee/Alitaria

Downloads
1,433
Likes
147
Rating
4.9
P
PrintablesIan Smith

Potentiometer Knob (Midi Controller Knob)

Basic knob for a potentiometer on a MIDI controller or any other device. Has an inset slot on the top that you can paint. Dimensions: Inner Diameter: 6.5mm Outer Diameter: 18.37mm Height: 20mm

Downloads
1,349
Likes
115
Rating
5
P
PrintablesIainY

D-Shaft Knob for Potentiometer/Rotary Encoder

D-Shaft Knob for Potentiometer/Rotary Encoder. Please remember to press Like if you download.

Downloads
1,061
Likes
57
Rating
5

Potentiometer knob 6mm

Hello! I made a simple potentiometer knob which I used to my project of audio mixer. Knobs are designed for 6mm potentiometer (hole is 6,2mm) it is sitting tight. ______________________________________ Cześć! Zrobiłem proste pokrętła…

Downloads
1,037
Likes
62
Rating
5
P
PrintablesJim

Potensic Atom Drone - Prop Guards

After damaging a few propellers, I made these Propeller Guards. Can't say they make the Drone anymore crash survivable… But, they look cool. They are labeled for their position on the Drone: Right Front (RF), Left Rear (LR), etc… Will add…

Downloads
985
Likes
65
Rating
5
P
PrintablesAithorn

Fader / Slide Potentiometer Knob

Fader para potenciometro deslizante Category: Music

Downloads
843
Likes
43
Rating
4.67
P
PrintablesGlen Bayley

Potentiometer Knob - 6mm slotted

This knob fits a 6mm potentiometer with a slotted actuator. Why yet another design? This design uses grip fins and a rib to prevent slipping and has a nice press fit that is tolerant to variations in print quality. I also include Step and…

Downloads
781
Likes
59
Rating
5
P
PrintablesNick

Potensic Atom Sun Shade

The shade clips onto the remote controller to prevent glare whilst flying. It still allows for antenna adjustment if needed. Best to print vertically, with a small raft to increase bed adhesion if necessary. PLA, 0.2 Layer Height, 5mm…

Downloads
717
Likes
49
Rating
5
P
Printablesalien hitman

Console Mixer Slider Fader Knobs Replacement for Potentiometer

This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…

Downloads
669
Likes
51
Rating
5
P
PrintablesSamDe

Potentiometer knob

This is a simple potentiometer knob for diy electronics. It has a little line to indicate the value.

Downloads
655
Likes
52
Rating
5

Landing gear for Potensic ATOM/SE

Landing gear Potensic ATOM/SE New design and model Atom Can record video without seeing the ski legs (wide angle legs) May be seen slightly when adjusting the camera angle down to the ground 90 degrees (only when turning and stopping…

Downloads
620
Likes
48
Rating
4.67
P
PrintablesS_L_K

Potentiometer model

Just a potentiometer model, nothing more created few years ago using solidworks 2019 .step file included .sldprt file included (solidworks 2019 or newer required / can be opened with fusion 360 as well)

Downloads
553
Likes
23
Rating
5

Potentiometer Knob 6mm

Potentiometer knob made for 6mm shafts. The ID on the model is 6.15mm to account for printing error.

Downloads
528
Likes
40
Rating
4.89
P
PrintablesObliviousOrange

Potemkin - Guilty Gear Strive

This is a model that I assume is taken right from the game. Found on Deviantart. I put a lot of work into making this a printable figure. And if it wasn't obvious, this is designed for resin printing. Idk how well this fella will work out…

Downloads
513
Likes
17
Rating
0
P
PrintablesBastienX8

Grippy potentiometer knobs

Potentiometer knobs with a nice grippy texture. There are four internal sizes to fit most potentiometers : standard 6mm diameter standard 6mm diameter with a deeper hole to cover the fixing nut larger 6.35mm diameter (often used on…

Downloads
511
Likes
63
Rating
5
P
PrintablesM.J. Caboose

Knob for Rorary Encoders or Potentiometers

The usual situation … the maker's solution … Weekend, shops are closed, ordering takes too long …. This time I needed a knob for a potentiometer in a front panel. Compartment for knobs didn't contain any 4mm axis knobs … so let's make it.…

Downloads
507
Likes
40
Rating
5
P
Printablesmrusk

Large Potentiometer Knob

The large sibling of my Potentiometer Knob with knurled surface for Potentiometers with 6mm round axle. The hollow 20mm diameter design covers the nut completely. Prints well on an FDM printer with 0.2mm layer height. Print with shaft…

Downloads
494
Likes
39
Rating
5
P
PrintablesFrank 3D

Drone Case - Potensic Atom/Atom-2 (Multi-Color)

I wanted a small, hard, case for my drone. It fits in the case with the battery, camera cover, velcro strap and the cable to connect to phone . Snap fit design! *1/7/26: A number of community members have noted that the Potensic Atom-2…

Downloads
477
Likes
45
Rating
5
P
PrintablesQrome

Guitar Amp / Potentiometer Knob

I designed these to work with my home made LM386 portable guitar amplifier. They are designed for a round (with rough edge) potentiometer with a 6mm shaft size. You may need to scale up or down slightly to get a tight fit. This one is…

Downloads
436
Likes
42
Rating
5
P
PrintablesPeter Farell

Zapotec Dice Tower

Zapotec Dice Tower made from Zapotec funerary urn. (1) Zapotec funerary urn, 600-900 CE - Download Free 3D model by Minneapolis Institute of Art (@artsmia) [b15865a] (sketchfab.com) Halfway through I realized I had already done one a…

Downloads
427
Likes
227
Rating
5
P
PrintablesWiseone

Potentiometer Knob 06

I never seem to have the right potentiometer knob for the job on-hand. I could keep a reserve of interesting knobs on hand, but that takes space. Instead, I custom design the knobs, as needed. Here is another of my 3D knob print designs…

Downloads
418
Likes
37
Rating
4
P
PrintablesDraftYeti

Vintage Boss Potentiometer Knob

A clone of the knobs Boss used on their vintage rack units, i.e. the RV-1000. I bought a non-functional RV-1000 to repair and noticed it was missing 3 of the knobs. This is an almost 1:1 replica, the top cap even fits in the same way.…

Downloads
415
Likes
56
Rating
5
P
PrintablesAuri3D

Perilla para Potenciometro (Knob for potentiometer)

Perilla de potenciómetro: Nombre del archivo STL: "PerillaPot.stl" Esta perilla de potenciómetro ha sido diseñada para mejorar la precisión y facilidad de uso de tus dispositivos electrónicos. Su diseño ergonómico proporciona un agarre…

Downloads
405
Likes
13
Rating
5

*IAF Idler 1.1+* for PRUSA Nextruder with MMU **Unleash the full potential of the PRUSA Nextruder PG-Pulley**

Non-MMU IAF-Idler Version now available here Updates: 17.01.2026: added modified CORE ONE Loveboard mount with more spacing for screwnut movement 26.11.2025: Note: It could be possible that you need to tighten the Idler screws after the…

Downloads
399
Likes
132
Rating
4.75
P
Printablesjohnbbb

Potentiometer Knob

I remodeled Cohencos knob to fit potentiometers with a 6mm inner diameter. I really like the rugged skin - it turns out very nice printed at 0.12 layer height.

Downloads
387
Likes
46
Rating
5
P
PrintablesSATO3D

Pote Multiuso

Recipiente con tapa a rosca

Downloads
384
Likes
24
Rating
5
P
Printablesjimmiedave

Potentiometer Shaft Adapter / Extender (Updated 12/22)

My late Mom's old Panasonic table radio needed its volume control (with integrated power switch) replaced. The replacement parts would apparently be considered vintage now, but Philmore sells an appropriate value pot with an integrated…

Downloads
349
Likes
13
Rating
0
P
Printablesbeerwema

Trimmer to potentiometer adapter/Trimmer with turning knob

Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…

Downloads
321
Likes
32
Rating
5
P
Printablespyrho // 25.wf

SP 404 MKII Knurled Knob / Potentiometer Cap

I made this for the SP 404 MKii (and that's the only device I tested this with) but I think it should fit most pots. Instructions This model is composed of two parts, “knob” and “indicator” (red and white respectively in the picture…

Downloads
319
Likes
23
Rating
0
P
Printablesflexoffset

6.35mm Guitar Pedal Potentiometer Knob

Oct 25 2025 I adjusted the design to allow for more room to add the threaded inserts, and I added a 3mm hole to make it less messy to add the M2 inserts. Here is the OnShape layout. I have created a variable table so you can really…

Downloads
312
Likes
29
Rating
5
P
PrintablesPanzerDesign

Skull knurled potentiometer knob, 6mm ID

Skull knob, 6mm ID for splined potentiometer. 0.20mm layer height, 0.40mm nozzle Brim No Supports In my experience, thermal coefficient of expansion varies between filament types. This is a tight fit that works well for silks. If you…

Downloads
310
Likes
50
Rating
5
P
Printablesraspbounty

Potentiometer Knob for 6mm Shaft

Pressure fit potentiometer knob for a potentiometer with a 6mm shaft Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3d Jake PLA Notes: Depending on the bedadhesion you…

Downloads
308
Likes
10
Rating
4
P
Printablestmackay

Potentiometer Planetary Reduction Drive Knob

A different take on the compound planetary gearbox. This time, we use split sun gears, synchronize the ring and planet gears. One sun gear will be fixed to the threaded shaft of the potentiometer (or some kind of tuning capacitor), the…

Downloads
303
Likes
28
Rating
0
P
PrintablesPeter Farell

Zapotec Dice Tower.

Zapotec Dice Tower.

Downloads
282
Likes
90
Rating
0
P
PrintablesBash-T

Potentiometer clamp for base mount / with top hat DIN rail mounting bracket

Just a clamp I designed for two potentiometer I need to put inside a control box. The clamp snaps on Potentiometer so it is not really necessary to put a nut on it for fixing. I used my Top Hat Rail / Cap Rail mount base plate to glue the…

Downloads
274
Likes
21
Rating
0

Potentiometer / Rotary Encoder Knob

Designed to fit perfectly on a shaft with 15mm length. There are two versions; with and without a small indicator.

Downloads
274
Likes
21
Rating
4.8
P
Printablesdvdprusa

base para potera

base de potera. luego hay que completarla con contrapesos, tela y acabados. imprimir con soportes y 100% de relleno sino flotara mucho

Downloads
268
Likes
6
Rating
0
P
PrintablesOdevsa

Another Potentiometer Knob :)

Ok, this is my version of one more potentiometer knob. I made it on FreeCAD, the file is available for download, feel free to customize as you need.

Downloads
265
Likes
30
Rating
5
P
PrintablesEnzofp

Potentiometer Knob

Knurled potentiometer knob measuring 21mm tall and 22mm diameter. Fits a standard potentiometer keyed 6mm shaft.

Downloads
264
Likes
41
Rating
5
P
Printablesstandus

Yamaha AN1X CS1X CS2X Synth Potentiometer Knob

This is a replacemet knob for the Synths: Yamaha AN1X Yamaha CS1X Yamaha CS2X No extra Hardware is used.

Downloads
263
Likes
16
Rating
5
P
PrintablesBR1ZB3AR.3D
Downloads
260
Likes
24
Rating
4.67
P
PrintablesGreg M

Potentiometer Mount

I needed to mount the potentiometer that came with a power supply rigidly. The back of the potentiometer says “Cosmos Tokyo RV24YN 20S B502 127C 3 2 1”. It came with this Genmitsu air cooled 300W spindle:…

Downloads
247
Likes
18
Rating
0
P
PrintablesGecko089

Simple Potentiometer (Poti) Holder

Couldnt find anything to quickly mount a poti on a wooden board for prototyping. This is for potis with a outer thread diameter of 7mm. This is a 5min design and not rounded / polished / optimized or anything. Feel free to…

Downloads
246
Likes
15
Rating
0
P
Printablesalien hitman

Mixer Potentiometer Knob Replacement

I made my own model of the potentiometer knob for the mixing console, it is great for restoration, the two models presented differ only in the tightness of the fit in the seat Category: Music

Downloads
241
Likes
25
Rating
4
P
Printablesbvogl

Rotary Knob Multicolor - standard potentiometers

These are potentiometer knobs originally designed for Korg Synthesizers (Minilogue, Monologue...) but will fit on any other standard potentiometer. There are 2 designs to choose from: design 1 resembles the original knobs design 2 is a…

Downloads
232
Likes
28
Rating
4.8
P
PrintablesMariobrosk

supporto capote Fiat 500

supporto scorrevole per armatura capote Fiat 500

Downloads
230
Likes
8
Rating
0
P
PrintablesBuster

Potentiometer knob

These knobs make it is easier to turn the potentiometer with your fingers, and it makes it obvious that these are to be turned to adjust something. Without the knob, you may be using your fingertips and accidentally pushing out other…

Downloads
228
Likes
29
Rating
5
P
PrintablesAlex Electron

Knob for encoders and potentiometers with D-shaft 6mm

Knob for encoders and potentiometers with D-shaft 6mm Fusion model included

Downloads
227
Likes
10
Rating
0
P
PrintablesWiseone

Potentiometer Knob 05

I needed some simple knobs and no time to get to an electronics store, so here is my 3D print design. The knob is designed to fit a 6mm potentiometer shaft. The knob has a 12mm base and has a height of 13mm, not including the indicator…

Downloads
221
Likes
16
Rating
0
P
Printables8BitSky

Potential and Kinetic Energy Marble Track

This model is designed for interactive learning about the principles of mass, potential energy, and kinetic energy using marble races. Students can place marbles of varying or equal weights at a uniform starting height to observe how…

Downloads
219
Likes
114
Rating
0

Potensic Atom/SE Sunshade (adjustable angle)

I designed it to be foldable for easy use and storage. I used ABS for this print because it is flexible. And you need to find a 2mm steel rod, 5cm long, to use in the joints.

Downloads
218
Likes
20
Rating
0
P
Printablesjoshua Bentley

Potentiometer Electric Throttle Box Rotary to Linear Variable Resistor v1

This is v1 of my pot box, this is to use a mechanical throttle cable with a potentiometer for electronic conversion of go karts, bike and totrods ect. I printed mine in black ABS but other materials would be suitable. this uses a 270…

Downloads
212
Likes
34
Rating
0

potentiometer control shaft extension

WORKS ON REPLACEMENT SHORT SHAFT POTIENTIOMETERS Example: My 1980's OPTONICA TURNTABLE RP-4705 Optonica was Sharp's high-end audio brand and its attempt to make inroads into the audiophile market. This vintage direct drive turntable had a…

Downloads
211
Likes
9
Rating
0
P
PrintablesThomas Coats

Knobs - potentiometer / replacement oven

The knobs on my oven broke so I designed three different knob designs. Printed the chunky one in Blank eSun PETG.

Downloads
204
Likes
18
Rating
5
P
PrintablesStillpointx

Knob for Potentiometer 3296 and others of this type

Knob for Potentiometer 3296 print with brim and disable detect thin layers.

Downloads
204
Likes
17
Rating
5
P
PrintablesGareth42

Vintage Style Potentiometer Knob

I reverse engineered the stl files from DraftYeti's knob in OnShape so I could make some changes. The knob is more or less the same on the outside, with some minor tweaks, fillets and chamfers, that sort of thing. I noticed the original,…

Downloads
203
Likes
29
Rating
5
P
PrintablesJakub Holub

Guitar potenciometer knob

This knob works on many types of guitars. It was originally built for Fender bass. But it's working on Ibanez, Yamaha, and many more models. Print it without supports and with layer 0.2 and less. Happy printing!

Downloads
202
Likes
25
Rating
0
P
PrintablesMan-X

LCD cover with three switches and potentiometers

Modified the LCD cover so you can fit one to three switches there to control lights, a raspberry or something else. I used the following switches and potentiometers:…

Downloads
200
Likes
51
Rating
5
P
Printablesrandy_s

CTS Potentiometer knob insert/piece/micro-knob

This is a part designed to fit snugly on 24 spline (fine splined) potentiometer (CTS, commonly used in electric guitars, unsure of what other, if any brands use this format.) There are any number of replacement and customized knobs but…

Downloads
187
Likes
9
Rating
5
P
PrintablesAithorn

Sliding / Fader Potentiometer Enclosure / Deej (windows mixer controller)

Its not perfect but it works ;) 8 Slider Version here: https://www.thingiverse.com/thing:4514085 UPDATE: I added Fader Knobs that look better than the stock ones This enclosure holds 5 slide potentiometers and one arduino nano. In my case…

Downloads
178
Likes
28
Rating
5
P
PrintablesKRYS-3D

Knob 3296 potentiometer 4mm

Voici 2 versions de bouton pour potentiomètre 3296 avec un diamètre de la tige du potentiomètre de 4mm une version avec une gorge de 7mm et une version sans gorge Here are 2 versions of knob for 3296 potentiometer with a potentiometer…

Downloads
177
Likes
12
Rating
0
P
PrintablesDraftYeti

Large Potentiomer Knob

A large potentiometer knob styled off a TC Electronic guitar pedal. This is suitable for a 6.35mm round shaft but could be scaled to fit other diameters, the overall diameter of the knob is 23.7mm. Category: DIY

Downloads
177
Likes
14
Rating
0
P
PrintablesAlex_P

Knob for rotary encoder or potentiometer

Knob for rotary encoder or potentiometer with 6mm shaft.

Downloads
175
Likes
13
Rating
0
P
PrintablesStellasFun

Knurled Potentiometer Knob

2+ perimeters and 0.2mm layer height recommended, but should function with just about any settings. No supports needed. Should be a reasonably tight push fit over pots with toothed shafts.

Downloads
174
Likes
12
Rating
5
P
PrintablesWiseone

Potentiometer Knob: 35mm

I never seem to have the right potentiometer knob for the job on-hand. I could keep a reserve of interesting knobs in my parts bin, but that takes space. Instead, I custom design the knobs, as needed. Here is another of my 3D knob print…

Downloads
169
Likes
9
Rating
5
P
Printablespcgeekesq

Protective Sleeve for Potensic Atom 2 drone (OpenSCAD)

Slide your Atom 2 drone into this sleeve to protect the propellors during transport. Less bulky than the velcro strap that comes with the drone. Also protects gimbal if you've lost the gimbal cover. I use this in the soft carry case that…

Downloads
166
Likes
18
Rating
5
P
PrintablesMuddy Trucking

POTENSIC ATOM 2 SHADE

its a sun shade for the controller pictured is an iPhone 6, but it still completely covers the screen on my 14+

Downloads
164
Likes
21
Rating
4.33
P
PrintablesMarco R

Potentiometer Drehknopf

Drehknöpfe für Einbaupotentiometer an Platten oder Gehäusen. Montage per Gewindestift M3 x 5mm

Downloads
164
Likes
11
Rating
5
P
PrintableszdenekGGS

Potentiometer knob with an axis diameter of 4 mm

One and two-color knobs with an inner diameter of 4 mm on the axis of the potentiometer. It is perfectly suited to a music mixer, for example the DELTA AVE type. The original buttons fall out, these are a bit tighter. Tightness can be…

Downloads
162
Likes
16
Rating
5
P
PrintablesHNCXTech

Highly Customizable Potentiometer Caps for DJ Equipment - dimensions, pot dimensions, pot angle relative to pointer, multi-material, multi-part

A highly customizable set of caps for any potentiometers in use on DJ equipment. Specifically designed for the D pots commonly found in mixing gear. The customization options allow for a simple switch to round pots. The design comes in…

Downloads
158
Likes
55
Rating
0
P
Printablesncsandor

Potentiometer Knob // MMU Remix

Print Tips Material: PLA Layerheight: 0.15mm (STRUCTURAL) Perimeters: 2 Infill: Grid Support: No

Downloads
158
Likes
23
Rating
0
P
PrintablesPanzerDesign

Customizable potentiometer knob, flat top, 6mm ID, printer knob

customizable flat top knob, 6mm ID for splined potentiometer. 0.20mm layer height, 0.40mm nozzle Brim No Supports please give credit for remix, I'm interested to see what you creative folks come up with In my experience, thermal…

Downloads
158
Likes
16
Rating
5
P
PrintablesiamSteve

Potentiometer Shaft 4mm Diameter

A replacement 4mm shaft for a potentiometer (Variable Resistor) that had broken in some old electronic equipment, this item has a shaft length of around 12mm, also uploaded is a longer 25mm length version. Even printing at high quality it…

Downloads
155
Likes
14
Rating
0
P
Printablesmcfada

Multi Color Push Button Knob Dial for Prusa i3 MK3S Potentiometer

Print some cool 2-color knobs to replace the stock one. Will fit on pretty much any potentiometer dial Share your makes, let's see some color Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3…

Downloads
153
Likes
13
Rating
0

10 turn potentiometer counter knob

Please note this model has been designed for and tested with a 0.25 mm nozzle. It contains small, precise mechanical elements and text that greatly benefit from smaller diameter nozzle. While it should be possible to print it with a…

Downloads
149
Likes
30
Rating
0

Airbus A320 Potentiometer Mount - V2

Mount and shaft extender for rotary switch, now with PCB for LEDs. Base printed in Black PLA. Light Pipe Upper and Shaft Extender in transparent PETG. All printed with 100% infill for strength. Base and Upper are glued together and then…

Downloads
148
Likes
16
Rating
0
P
PrintablesTheNewHobbyist

Ceramic urn, Zapotec (AD 200-800), Oaxaca State, Mexico

This guy looked like he was enjoying a nice cup of joe at the museum so I decided to capture him. This urn can be found at The Field Museum in Chicago, IL. "Ceramic urn, Zapotec (AD 200-800), Oaxaca State, Mexico" was captured using 123D…

Downloads
145
Likes
42
Rating
5
P
Printablestmackay

10-turn 25mm Potentiometer Knob

Compound planetary gears with 11:1 ratio to achieve 10 full turns from a standard (almost) single turn potentiometer. Shown with 18mm guitar pot. The cap is glued on, either to outer ring or to the central gear for a slowly rotating dial.…

Downloads
143
Likes
15
Rating
5
P
PrintablesRJJ

Potensic Atom 2 Battery saver

The Potensic Aton 2 batteries if you store them in the charger they are designed to go into a sleep mode and discharge them to 0%. If stored outside of the charger over a period of 2 weeks they will discharge to 70% the to 50% and stay…

Downloads
142
Likes
20
Rating
5
P
Printableskiklhorn

Potentiometer and encoder hex wrench 10mm, 8mm

The first and the last 3mm 100% infill. Or just use the .3mf file.

Downloads
140
Likes
7
Rating
4.5
P
Printablesfelixmxr

Parabolic antenna reflector for Potensic Dreamer

Parabolic antenna reflector for the remote of the potensic dreamer pro. I dont think it works for the potensic dreamer 4k, which uses the phone's wifi. I use sticky spray and aluminum foil as seen in the picture. I reached the 2000m…

Downloads
133
Likes
15
Rating
5
P
PrintablesSpartancat

potentiometer knob

Just a potentiometer knob, inner diameter is 6mm. Two versions, one with a round inner, the other with a D-shape inner.

Downloads
132
Likes
5
Rating
5

*IAF Idler 1.1+* for PRUSA Nextruder noMMU **Unleash the full potential of the PRUSA Nextruder PG-Pulley**

Compatible with all PRUSA Nextruder (NO MMU) (MK3.9, MK4/S, CORE One/L, Prusa XL) Frustration-free and with hollow grinded Filament Recovery Version for PRUSA Nextruder WITH MMU can be found here Updates: 17.01.2026: added modified CORE…

Downloads
129
Likes
36
Rating
4.33
P
PrintablesHobbybotics

Knob for rotary encoder or potentiometer

Customized version of http://www.thingiverse.com/thing:1072393 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1072393 Instructions Using the following options: Axis_Lenght = 7 Knob_Diameter = 20…

Downloads
122
Likes
6
Rating
0
P
PrintablesExellent

Knob for 6mm Encoder/potentiometer with or without cut. And colored Indexer

A Knob with colored Inserts, so that you can simply get different indexers on the Knob, and different encoder shaft sizings. Mine are for a 6mm encoder for a Hercules RMX Inspired by…

Downloads
122
Likes
20
Rating
5
P
Printablesjasonps

Potentiometer Knob

It is a simple potentiometer know with 6mm hole

Downloads
121
Likes
9
Rating
0
P
PrintablesPapyjo

Rail train Lego optimisé pour connexion par dessous (utilisation de poteaux)

Ajout de quelques détails sous les rails pour obtenir un emboitement plus positif à l'excellent modèle de “ Evgenym” . https://www.prusaprinters.org/fr/prints/48045-lego-city-train-straight-track-rail Particulièrement utile pour les…

Downloads
120
Likes
20
Rating
0
P
PrintablesKen Mills

Potentiometer Knob

A simple potentiometer knob I needed to fit a in a small space. Print without supports, with the hole facing down.

Downloads
117
Likes
9
Rating
0
P
Printables3DMadLab

Slide Potentiometer

Basic electronic component

Downloads
115
Likes
6
Rating
0
P
PrintablesGenericLifeform

Knob for 6mm trim potentiometer

Knob for a keyed 6mm diameter potentiometer (trim pot). Keying includes a notch on one side and the slot typically used by a screwdriver. Snug fit and fine details. I printed at 0.12 mm layer height and with a brim to help with bed…

Downloads
115
Likes
17
Rating
0
P
PrintablesA

WH148 Potentiometer Nut

M7 nut for the common WH148 potentiometers that are everywhere. Intended to be printed as is with a 0.4 nozzle, no scaling required on a MK4. The model already includes a bit of clearance for a good fit. To make your own use an M7 hole in…

Downloads
114
Likes
8
Rating
5
P
PrintablesPeter Farell

Zapotec light saber.

After adding displacement to a cylinder's sides correctly, I experimented with stable diffusion to create 3D paintbrushes and patterns for UV displacement on the cylinder's sides. It never gets boring! Here is an example of a light saber…

Downloads
112
Likes
36
Rating
0