317 models
Print settings 0.6mm nozzle 0.32mm layer height 20% infill (but it probably doesn't matter too much) A test model is included so you can test that your hardware fits and that your printer settings are working, but this worked fine on my…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
There are two groups of files for this. One is just the front and rear caps. The other is the front cap with a kill flash. Shockcord Cap with Killflash: I have ‘remixed’ and added to this kit by creating an optional front killflash/anti…
Print approx. €13.08–€15.98 excl. taxPreliminary estimate for one variant
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
The dimensions are entirely based on the original baffle. There's nothing wrong with it per se. My scope was purchased in late 2019, it already came with baffle extension, so no stray light issue. But I don't feel comfortable reaching…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
Mangeoire Violon Fichiers pour imprimante Imprimante MK4 Pour les amies de la nature et violonistes qui souhaite décorer leurs jardin avec cette mangeoire original. Vous aurez besoin d'une vis bois M3 x12 ou 15 mm et d'une vis fileté M3…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
I made my one printer box with some recycled materials. Printed in 0.2mm layer height, 20% filling with PLA+, without support except for the hinges The side plank have 10 mm of thickness and top/bottom plank have 20 mm of thickness. For…
Print approx. €20.48–€25.03 excl. taxPreliminary estimate for one variant
Printed with 0.15mm layer height, fuzzy skin on outer layers with grey extrudr NX2 PLA.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
The Dummy Counter is just a small piece of plastic with the same dimensions of the standard counter that comes attached (via sticker) to Primatine Mist inhaler canisters. You can tape the dummy counter onto a canister that has had the…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.
Update 2023 : New designed parts available! Clamping range now 25mm and includes V-groove New grippy slider Check the file names starting with 2023 NANO VISE… The new basic version (no desk clamp) you can find here:…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
A sculpture of Optimus Primal from Transformers: Rise of the Beasts. The head was designed by the animators of the Transformers film and then made into a 3D model by Morgan Morey AKA Printed Obsession for 3D Printing Nerd . Printing The…
Model is only resized to what would fit on most printers. Dimensions: 127 x 107 x 223mm 1:10 scale One of Augustus Caesar’s most famous portraits is the so-called Augustus of Primaporta of 20 B.C.E. (the sculpture gets its name from the…
J'ai déplacé mon design sur MarkerWorld Si vous souhaitez soutenir mon travail téléchargez-le et Boostez-le ici : https://makerworld.com/fr/models/2181814-fully-customizable-box#profileId-2368182 Boite avec charnière et fermoir…
3 Jaw Chuck modified for the Desk Clamp Version of my Nano Vise V2 https://www.printables.com/model/155120-nano-vise-v2-by-prima (get the desk clamp parts from this link above) easily swap between Vise or Chuck for your work! suitable to…
DEADPOOL SCOOTER - VESPA PRIMAVERA SCALE 1:12 If you want this as a multi piece thing you can get it here: https://cults3d.com/en/3d-model/game/deadpool-scooter-vespa-primavera If you have any questions, let me know in the comments. You…
Your printer needs to be dialed-in for this file to print. Please ensure to have leveled bed. Used some already existing DXF file as template which was available to download (unfortunately no info about designer) and re-designed it from…
Robust/rugged designed card wallet Select between bottom part with compartment or plain version UPDATE (June 8th 2024) : Now bottom part additional available for threaded insert M3 x4mm Top part includes Deco Frame for printing in various…
Funnel for Harley Davidson Twin Cam primary oil. Print upright and use brim. Model doesn't need supports. Should print fine with 0.6n nozzle. PET-G is suggested filament. Inspired by original Harley part.
A friend of mine had used all kind of air vent supports and finally the air vent blocks of his renault trafic were completely broken. I found on internet many version of the little horizontal blades but not the long vertical ones. Thanks…
An alphabet set for teaching letter recognition to children. Original design at the request of a local preschool teacher to match the letter styles the kids were expected to know for Kindergarten admission. Published here with approval…
A 3d printable Model of the AIDAprima It is optimized for printing a at smaller scale, for example with a length of 12cm. I wouldn't advice that you use supports for the upper part.
This is a simple temporary support to help install the primary mirror on your Hadley telescope. Can also be a nice stand to install the cell on the mirror and let it cure (~24 hours) before further handling. Very specific, but it was…
An alphabet set for teaching letter recognition to children. Original design at the request of a local preschool teacher to match the letter styles the kids were expected to know for Kindergarten admission. Published here with approval…
being a RE4 and RE4 remake fan, i really appreciated they inculded the original's knife as an unlockable in the game i also took the opportunity to practice knurling on a non-cylindrical shape, for the handle speaking of which, included a…
Optimus Primal. With Added UV offsets. This was a particularly hard fix. And I am guessing it will be hard to print. If you do give this a go please evaluate and post your results and suggest changes. Adding the offsets made it difficult…
I'm delighted to share with you a refined version of the Terminator T-800 bust, originally posted by machina on August 23, 2014. This remix brings the iconic model to life by adding intricate details using three primary colors. The…
A number set for teaching shape recognition to children. Original design at the request of a local preschool teacher to match the number styles the kids were expected to know for Kindergarten admission. Published here with approval from…
Eat your popcorn for your Rise of the Beasts viewing from your Optimus Primal Popcorn Bucket! Instructions are in the images. The main helmet is assembled with 5 pieces. There are optional pieces (7 and 8) for those who want to paint the…
This is a simple remix of the Hadley Mirror and Lens Covers by Gyoenastaader to offer a little more protection of the primary mirror by blocking the gap at the edges. I also moved the tab from the center to the edge for better leverage.…
Cette spatule spécialement conçue est l'accessoire indispensable pour tout utilisateur d'imprimante 3D. Elle vous permet de retirer délicatement et efficacement les objets imprimés du plateau, minimisant ainsi les risques d'endommagement.…
This is a simple drop in killflash that helps reduce glare. I couldn't find a cheap model online so here you go. Its held in by the stock scope cap. Enjoy!
This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…
🧴🛠 Bouchon 3D pour tube de silicone ou de colle – Simple, pratique et efficace ! Qui n’a jamais refermé un tube de silicone ou de colle en croisant les doigts pour qu’il ne sèche pas trop vite ? Moi aussi, ça m’est arrivé plus d’une fois.…
The rubber casing of the original key was braking by the keyring hole. Inspired by Dontown 's : https://www.printables.com/model/39576-vespa-key-repair Had to remodel ex-Novo for a larger and different type of key. Added a lip on the…
I purchased and printed out Mikeprsmtl's all-in organizer but wanted to store my cards in one of the expansion boxes instead of in the main box. The Expansion Insert A holds all of the monster cards, as long as they are unsleeved and…
Make your own Vespa A detailed 1:6 scale model of the Vespa Primavera scooter. The model includes a functional stand, small, medium, and large windshields, standard rear handles, a rear folding rack, and a functional top case. Print…
Printing Info: print orientation as they show up here in the viewer only latch need support (be careful when removing then the support material) 2shells for sturdy design I recommend 100% infill This is a complete new design but following…
These are trays for all the tokens included with the game Primal: The Awakening - core game and all expansions. There is space for ALL tokens, all the spaces sized to fit the included number of tokens. While this design is sized to fit…
This is a fairly close copy of the primary speech module of an Avon S10 respirator. It's intended for cosplay, display etc, for example making a replacement in UV-reactive, glow in the dark filament, or a different colour to match a…
Primary Mirror Mask for newtonian telescope: GSO 150/600 f/4 TS Photon 154/600 f/4 Orion Optics 150/600 f/4 This is a set with a mask and 3 TPU-Mirror clamps. i designed the parts because the original brackets protrude too far into the…
Community tested as I don't have the right spool and have designed this on request! “Scale to 99.95%” Medium-sized 500g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage…
This is 3D puzzle that "Mammoth Skeleton". Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models are…
Camera is generic square 24x24mm chinese reverse cam from aliexpress, amazon or so, you only need to remove original bracket to fit it. Housing just clips onto the glass corner, no glue required, holds perfectly.
2 versions available: hole diameter 6 or 7.5mm layer height : 0.1 - 0.16mm no support
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲ IMPORTANT NOTES ▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲ This frame DOES NOT support DJI O3 or O4 Pro cameras : Micro / Nano sized cameras only - Look up the Pragma C if you fly with O3 / O4 Pro without HD Cam. Or you could just upgrade…
This is part of our Legio Prima Victrix project! Subscribe to pre-launch page on Kickstarter: https://www.kickstarter.com/projects/dakkadakkastore/legio-prima-victrix?ref=98wzcv Take part in an extra short survey to make this project more…
This is 3D puzzle that Wyvern Skeleton. Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models are…
My son wanted a gift for his primary school teacher, so I created that bookmark with a pair of scissors, a pencil and a sharpener. This bookmark is easily printable, uses very few filament and takes around 10-15 minutes to be printed.
These rings replace the Threatened and Aggro tokens in the board game Primal: The Awakening . We used to place the tokens near our hunters on the game board, but we found it annoying to move all the tokens when we moved our hunters…
Print with the pattern facing up
I printed with PLA, 8 perimeters and managed to release the nut. Elephant foot compensation 0.4mm.
Print these and snap them onto the rods of the 203 Leavitt telescope to protect the primary mirror from collecting dust or inadvertent touches. First snap on the one labeled 1 and rotate it into place, then snap on the one labeled 2 and…
A new 3D figurine generated by AI, a Rabbids Prima Ballerina (Lapin Crétin Danseuse Etoile). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small…
F YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Primape, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
Cette spatule spécialement conçue est l'accessoire indispensable pour tout utilisateur d'imprimante 3D. Elle vous permet de retirer délicatement et efficacement les objets imprimés du plateau, minimisant ainsi les risques d'endommagement.…
I created this anti-reflection device (ARD, kill flash) for my primary arms 2.5x prism scope. This works great as a kill flash in bright sun light as well as artificial light. It also acts as a sacrificial cap for bump protection of your…
When the time comes to install your primary mirror on the Hadley LTA, there are multiple options. Here's how I assembled mine: This is a section view of the primary mirror in its cell (left) and the LTA (top and right), with the rear of…
Edited April 2, 2024 This ring also fits the Vortex Sonora 4-12x44mm scope. Sonora is the Crossfire II 4-12x44mm branded for sale to dealers. Two of the stubs don't quite line up but close enough to work without alteration. Original Post:…
Locks primary drive in place while removing or installing primary drive components. Designed for Harley-Davidson motors but will work on other brands with similar primary's. Print with extra walls and infill so you can use it more than…
Découvrez dans cette vidéo YouTube les améliorations essentielles à apporter à votre imprimante 3D Ender-3 ! Je vous guide pas à pas à travers 8 modifications de base pour améliorer votre imprimante 3D. Vous apprendrez comment ajouter un…
Voici mon support outils pour l'impression. il est en 2 parties et assemblé par tenon/mortaise. possibilité de le fixer au mur par vis. Imprimé en PLA, couche de 0.3mm, bordure de 8mm, SANS support.
While an excellent telescope that has upped my astrophotography game, the Sky Watcher Quattro 200P is starkly open on the back side near the primary mirror ( similar to an issue near the focuser tube ). In fact, most of the back is just…
Simple primary mirror mask to cover the often imperfect mirror edge. The inner diameter is 195mm Printable on 210mm print beds like prusa mk3s can be used with such primary mirror cell: Teleskop-Express: GSO Hauptspiegelfassung für 8"…
It is recommended to add an aperture mask to cover the rubber holders. These protrude into the mirror surface area what you can see in the diffraction spikes on bright stars. Printing: ~ 25 grams, Nozzle 0.4 mm or 0.6 mm (usually faster),…
i wanted a token tray that fits in the base box, i also use the token boxes from here https://www.thingiverse.com/thing:6547332
Community Spool Holder Primarily for Joined PET#1 Filament. Wide Core to stop joined filament from breaking. Enlarged from the mini bottle strip spooler. Uses a M5x8 screws to hold the top onto the bottom. The top of the case is glued to…
Diese zweiteilige Sägeblattführung ist in einer Gehrungssäge verbaut. Sie führt einerseits das Sägeblatt im eingestellten Winkel zum Grundgestell. Zum zweiten führt dieses Bauteil die Säge von oben nach unten rechtwinklig zur…
Very easy print and assembly. Stand bolts into the projector with two M4 bolts and bolts together with four M4 socketed cap screws and nuts. does not cover any fans or ports, made for Vankyo v630w. I found that even though the manual says…
This is 3D puzzle that Griffin Skeleton. Since there are only a few parts, 3D printing time is short and assembly is easy. When 3D printing, it is convenient to use packaged STL models with all parts in one package. STL models are…
Tout d’abord, un grand merci a LeeFL pour l’étude de cette miniature de la MK3. Je me suis basé sur son travail pour la réactualiser et la transformer en MK3S+. La plupart des fichiers ont été repris pour : -fixer le ventilateur a 45 °.…
Cincinnati Reds Primary Oversized Necklace Logo that I designed. I hope you enjoy!
PET-G Layer Height 0,2 Wall Line Count 4
Primal: The Awakening has a ton of cards. I did not get the sleeves or card box for storage and decided to use some GameGenic Dungeon containers (550 and 1100). I sleeved only the cards that require shuffling (standard size), and left…
Öleinfülltrichter. Speziell gemacht um der Prima D neues Getriebeöl zu verpassen. 22 mm Außendurchmesser unten am Stutzen. Für den rauen Werkstatteinsatz aus TPU :) Edit: Mittlerweile ist das Teil als absoluter Allrounder im Einsatz.…
Hallo da mir das aufhängen mit dem Seilzug beim Lüfter nicht gefallen hat und ich den Lüfter fest im Zelt haben wollte habe ich mir diesen Halter überlegt. Der Halter ist für einen Prima Klima PK125-2 Abluftventilator konstruiert um den…
Just a plastic shoe to wedge in between the chain and clutch basket for easy removal. Found one on Amazon for $8 w/o shipping, so I made this one from the dimensions they listed on the website for $1.50. .2 resolution and 100% infill with…
Nach dem mir die Verschraubung für das Sprühlanze abgebrochen ist hab ich eine nachkonstruiert. Am unterteil ist zwar ein grobes Gewinde weil das Gewinde zu fein mir war zum Drucken.
Pedal mounts for Xbox style rumble motors onto the Asetek La Prima sim racing pedals. I did not like having the motors exposed as most existing designs have and didn't want to use a clamping method either. My motors have a strip of foam…
Lens cover for the back of the primary mirror. holder for covers https://www.printables.com/model/771124-hadley-lens-cover-holder Remixe from Gyoenastaader one and inspire by Six one. UPDATE: V2 cover with the anchor near the base, need…
The dragon prince primal sources
Voici 3 profils d'impression pour utiliser Prusaslicer avec votre Sovol SV06 Plus sous Klipper
Can hold smartphones with dimension up to 85mm width + 11-12mm thickness PLA+ or PETG Material 0.2mm layer height Some of the parts require support
compact sized door stopper Printable in various material
Primary is easy to build, number the slats with each print, and place in order 1-8 to achieve spiral clockwise or counter clockwise. Resize the parts as needed, the core hole is 56.6mm/2.22 inches around for 1.5 inch PVC tube cap to fit…
Maniglia per l'apertura del portellone posteriore del furgone Fiat Scudo, Peugeot Expert e Citroen Jumpy prima serie
I made a model of the primary from the secondary antenna of the locator
Terran Pistol MK2.0- a 220+fps slide action primary blaster! Terran Pistol was originally conceived in early 2021 as an aesthetic replica of Terraria's “Dart Pistol”, but 3 years later I decided to rework much of the blaster's functional…
Remixed faucet handle, so it fits the mount I have better. The original one we had didn't withstand handling by kids for long, so I adjusted this one for infinite replacements. Works well even with PLA for me, but PETG is likely a better…
I like the design of the "Nano Vise V2" but find the M8 screw, which connects the balljoint with the base, to be kind of overkill for such a small part. Not to mention that I don't have any M8 screw on hand :-) So if you want to use a M5,…
Remix to fix the Sun source; official art shows it with three flames. Also isolated the symbols for use individually.
Je vous guide pas à pas à travers 8 modifications de base pour améliorer votre imprimante 3D. Vous apprendrez comment ajouter un cache d'écran LCD contre la luminosité, réaliser un câble management efficace pour une apparence soignée,…
Just as the title says, a simply Primary mirror protection plate for your (Hadley) telescope. Inside 115mm, outside 118mm.
Printed on a Creality Ender 3 Neo with 100% infill, without supports and standard PLA.
Náhradní pouzdro (kapsa) pro lamelu o šířce 36 mm. Pouzdro je určeno pro rošt rámu menší než 100 cm. Rozteč děr pro kolíky je 65 mm. Kapsu lze použít k velkému množství roštů, většinou o počtu 28 lamel. K příkladu uvádíme: Primaflex,…
Primawarrior is a wild fusion of The Ultimate Warrior and a Pokémon like Infernape — full of energy, intensity, and neon facepaint. This is the third model in my WrestleMon series, where I mash wrestling legends with Pokémon aesthetics…
Optimus Primal Beast Wars Shoulder Missile Replacement. Lost all my missiles as a child and thrilled I could revive them again from my garage. For some reason Cura imports my model at 10% scale. Please scale up to 1000% and the model will…
Just a printed version of those goofy logos you see dangling around peoples necks from chunky plastic chains . This one of course is the Colorado Avalanche primary logo. I used a binder ring to attach it to the chain.
![[Fantasy & Primal]Mammoth Skeleton](https://media.printables.com/media/prints/474913/images/3887755_2df047ac-1f92-4caf-9584-4e96b84da12a/large_display_54cc78eb-62d6-4b2c-9951-a4d5c89cc27f_474913.jpg)
![[Fantasy & Primal] Wyvern Skeleton](https://media.printables.com/media/prints/474449/images/3882645_cafb15c4-d5ed-4422-9fdb-bc73b8ce67cd/large_display_wyvern-pic1_474449.jpg)
![[Fantasy & Primal] Griffin Skeleton](https://media.printables.com/media/prints/474912/images/3887706_eebdc9b9-4d94-4da3-8240-5bedfa9cd71b/large_display_griffin-pic1_474912.jpg)
