112 models
Hello, tomorrow problem sign. G-code with embedded pause to swap filament color manually. Thanks for your download, enjoy the print!
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant
The usb-c hotend cable of the Elegoo CC if know to fail. Mine did. So I route a TB-4 cable through the printer and used this piece to secure the plug. This is the first version, and it fits my cable. I'll probably make modifications /…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Just a quick remix of Ninetales. There is some weird geometry inside Ninetales's chest that (I think) causes a gap in its body. I've removed some (not all) of the weirdness which solved my issue. I've added Nidoking and Jigglypuff too who…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
A keychain symbol of the three-body problem.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
This design is based on the science fiction book 'The Three-Body Problem.' The design is in Chinese characters, so I had to make some minor modifications to make it easy to print and everything fit into a structure. My favorite book. A…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Screws: 3.5 mm x 35 mm (sunken head) Cord diameter: ca. 3mm Board thickness: 18 mm or more (so the screws don't stick out the back!) Get a paper map (or have one printed), glue it on a wooden board of at least 18mm thickness and put the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.96–€4.83 excl. taxPreliminary estimate for one variant
This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Printed on an Ender 3 v2 Neo in 17.5 hours. I found an amazing model of a Disney castle, but it would not slice properly for me. I spent a ton of time mesh editing the model to make it super easy to print. The model shows errors, but…
Sovol SV06 Plus is a great printer, but its bed heating cables are not fixed resulting a safety issue. With this solution first 20mm will be fixed. Don't forget to print it from ABS or other hi-temp material. Installation requires 10…
Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…
My mother has arthritis in her hands, and is unable to grip her Ryobi battery to remove it from her battery powered pruner and battery charger. With this, you can place the battery (still attached to the tool) and press down and the…
fix k1 max chaine problem
It's my favorite trilogy The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is…
Печать 101 % нейлон скорость 20 можно при 02 можно 01 слой . Удачи если столкнулись с такой проблемой .
Bambulab Bambu lab AMS holder Upgrade No AMS problem
Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…
Funny Sign - "Dont be part of the problem, be the Whole Problem" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file to make it easy to…
Welcome to the edge of reality and beyond with your very own 3D-printed San-Ti VR Headset, your gateway to the bewildering universe of “3 Body Problem.” Who needs an official invite from the enigmatic San-Ti when you can craft your entry…
This is my San-Ti File for my electroplated VR Headset Process is documented here: https://www.instagram.com/reel/C5YhhFsN0CJ/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==
Printing: Flip it 180 degrees on the Z axis. And paint the supports roughly on these places. There is also a 3mf file with the supports ready.
Apollo 13 - "Houston, we have a problem" - 1995 3D printable model.
I've seen and others like this printed on paper in tool boxes and maintenance departments for years. I thought it would be fun to actually make one. I used manual color change and had to play around with the text sizes to get complete…
Funny Sign - Beer May Not Solve Your Problems, But Neither Will Milk or Water Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file to make it…
This is a blend of two models: Dwayne the Rock Johnson's head and an Octopus. I made it with the intent to print out of TPU. I used Blender to chop and combine the two models (badly, I might add … in that it is not a "clean" STL file and…
Problem solver Nextruder Heaterblock, Hotend, Nozzle, mounting angle (Prusa XL multi-tool) It says in the Prusa assembly manuals "Rotate the heating block as shown in the picture. The angle must be approximately 35° - 40° to avoid…
This is a Stamp with the Logo of the Band Blackout Problems. I dont own the Logo and all Copyright remains with the Band, this is simply a Fan Project. There are different versions with Positive, Negative and Handle Options. Lastly, if…
It looks great when it works, but it often doesn't. Print and use at your own risk! The concept of this enclosure was to guide the air, which worked fairly well, but the back still needed to be opened up for the Bitaxe Gamma to not get…
I've created this remix to address an issue in OrcaSlicer, where the bridge infill lines are not anchoring enough to the perimeters. To replicate the issue as fast as possible I've just cut the top. This issue is also discussed here:…
So this was a very simple remix just to lose the needed height to get Surfalex's clips to fit in the notches on the support “whip"s. Because of the heavy filleting on the part (which is the sole purpose FOR this part, in order to keep the…
The badge is quick to print , in half an hour you are done. No need to be detailed, the 0.20 layer works great . Ideally print the badge body in two colours , just use a simple colour change on layer 17 (at 3.40 mm height). But of course…
puzzle how to fit 4 Triangles OR 11 squares into the square
I used this models to create a bookmark, based on the symbol of the series. I printed in 0.10 layer, with first layer of 0.20. You can print in 2 colors, with change color in line #16 (I made mine in black and white). So, if you are going…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. Please STOP that! I will pull these off here if this keeps happening. I put these up for the benefit of the community. Not the monetary…
Wall art based on the new Netflix show 3 Body Problem. Just got done watching it and enjoyed the series, so I thought I'd make some wall art for the 3 Body image. I hope you enjoy it!
Engineer - Solving problems you didn't know you had in ways you can't understand
There is problem with big forces from friction in the end (or make bigger hole +0,5mm?) if you have good printer maybe have you chance spin without encap, it spine by me - forces ca 30N
Another Funny Sign - “I Think the problem is that I'm 20% Stud, but 80% Muffin” Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file to make…
Beschreibung (DE): 🍺 Schild "Alkohol löst keine Probleme, Wasser aber auch nicht." – Perfekte Deko für Bar, Küche & Kühlschrank! 🍻 Ein zeitloser Klassiker für alle mit Humor! Dieses Schild ist der perfekte Hingucker für die Hausbar, den…
3 Body Problem Icon Earring - 3D printable For Polymer Earring Clay Cutters check our store! https://polycutzclaycutters.etsy.com
Klasyczny, minimalistyczny brelok PRO8L3M. A sleek, minimalist keychain PRO8L3M
On my Prusa i3 MK3S prints were intermittently failing during a print, reporting that the SD card had been removed. This seemed to be caused by the contacts in the printer not pressing firmly enough on the card and loosing contact with…
D. Smith et al. recently discovered a shape, that can be tiled in infinite non-repeating pattern. This is known as the “einstein problem”. Not related to Albert Einstein, but instead focused on discovering single shape of tile ("ein…
Do you have problems getting your Roomba to dock and charge correctly? This simple solution may be just what you need. I noticed that when we were having issues getting our Roomba to charge, I tried various things. I cleaned its contacts,…
There is a bit of a story to the release of these mods. Theo Geernick & Symen Hovinga created over 100 amazing puzzles through No Problem Puzzles (NPP). However, Symen died and Theo released all NPP puzzles through Andreas Röver (author…
Use filament changes to get whatever colors you want.
Framed art from the new Netflix show 3 Body Problem. Just got done watching it and enjoyed the series, so I thought I'd make some art for the 3 Body image. I hope you enjoy it!
I'm a huge fan of the Netflix TV show "The Three-Body Problem," so I decided to create this wall art/keychain inspired by it. If you've watched beyond the fourth episode, the reference will likely resonate with you. Crafted using two…
this is problems my frist project ples souport me.
Three-Body Problem Themed Cribbage Board. (No Pieces)
The Moving Sofa Problem : The Moving Sofa Problem is a famous unsolved problem in mathematics that seeks to determine the largest two-dimensional shape that can navigate through an L-shaped corridor of unit width. In 1992, mathematician…
The 36 Officer Problem is a curiosity to say the least. It is a puzzle comprised of differently ranked officers represented by chess pieces and regiments represented by color. It has only one rule: rearrange the tiles such that no officer…
Visualizing the orientation of geological planes in the subsurface can be tricky for students as they are expected to extrapolate from one-dimensional data (e.g. borehole depths). We commonly use depth data from three boreholes to…
Engineers like to solve problems
Our PÅHL Desk from IKEA was askew due to the carpet. I fixed it with Fusion360. The file is parametric, i.e. you can fit the dimensions in Fusion 360. Also suitable for many other furnitures. Printed with FLEX and 0.6 Nozzle on a PRUSA MK4
The created models are the red and blue subparts of the cubic models that appear in Problem 1 of the "Broken cubes" module on the Mathematikus interactive website. See…
As with most people that have done high temp filaments in the k1c and K1 printers, when I got above 40ish degrees for 20-30 minutes the camera would cut out. I had a 20x20mm blower fan so I wanted to test if that would help while I waited…
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 2 textstring1 = If there…
Designed for single extruders and filament swapping.
These drink coasters are based on the 3 circles logo from the "3 Body Problem" Netflix series. It's multi-colored and can be printed all at once with an MMU/AMS, or printed in parts and assembled. I printed these in PLA, but would…
The created models are the red and blue subparts of the cubic models that appear in Problem 5 of the "Broken cubes" module on the Mathematikus interactive website. See…
This ist a clamp for the problem with the screen of a Yamaha DGX 620 keyboard or similar. In most cases, there is no need to swap a screen. After a few years, the connections to the display are no longer in good conditions. The problem…
The source marked this model as adult content.
I just added a ramp to @CamRodandChief 's clever design
Real Problems by RebelTaz I clipped this comic panel out of the newspaper back when I was a kid. I've always been such a little ray of sunshine, haven't I? Anyway, this fits my personality so I thought I would share it with all of the…
Das Modell besteht aus 17 Teilen verschiedener Größe, die zusammen ein Volumen von 5x5x5 Kubikeinheiten ergeben. Diese Teile passen in die Box. Wenn das Puzzle gelöst ist, zeigen alle sechs Fächen des Würfels das gleiche Muster, denn er…
The created models are the red and blue subparts of the cubic models that appear in Problem 4 of the "Broken cubes" module on the Mathematikus interactive website. See…
The created models are the red and blue subparts of the cubic models that appear in Problem 2 of the "Broken cubes" module on the Mathematikus interactive website. See…
The created models are the red and blue subparts of the cubic models that appear in Problem 3 of the "Broken cubes" module on the Mathematikus interactive website. See…
There is something wrong with this. FIND IT
I have an Epson ET-8500 photo printer. Unfortunatly I noticed that there are some feed problems with the photo paper. This little insert should solve this problem. I've printed it with PETG for extra strenght.
Added the Tesla logo to the lid. Printed with Prusa XL using PCTG/PETG I have the all weather floor mats in my car so the spiked feet didn't hold very well. I added magnets to the base and put a piece of sheet metal under the floor mat…
Alcohol problem print Settings: nozzle diameter: 0.80mm layer height: 0.500mm infill: 25% support: NO walls: thickness or at least 1.0mm top and bottom layers: 3 to 4 material: PLA Parts Needed: Nuts and bolts:…
Perfect decoration for your lab or workshop. Quote attributed to Dave Jones of the YouTube Channel EEVblog. (Sometimes called Dave's Rule or Dave's Law.) My design. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No…
I'm a big fan of the “Three Body Problem” series and wanted to make a Valentine's Day themed logo in the spirit of their logo. Other heart designs I have made. Printing: This print was designed for nozzles with 0.4mm width.
No AMS. Nozzle 0,2 ,layer 0,10. Model sticker for rc car. Size 15x30 mm. I divided the model into separate objects, you can choose the color of the inscription and the sign.
Keychain inspired by the Italian F1 journalist who keeps repeating: "Trouble!!!" for 10 minutes
I had several small problems with clickfinity based baseplates like my CLICKBase as bins hard to insert/remove, especially if the bins are bigger creep changes the holding power slow to print so i fixed those issues with this connector.…
Inspired by Numberphile's video on centrifuge problem https://www.youtube.com/watch?v=7DHE8RnsCQ8 In short, this is a visualization tool on how to balance 12 slot centrifuge, especially for the case of 5 and 7 test tubes(in this case…
Aren't you tired of the filament spoon rolling out of place and see your 3d prints shifted? here is the solution!
模型转盘大升级！250mm尺寸完美解决摆放问题！@您是否曾为您的模型转盘尺寸小而烦恼？摆放的模型超出旋转范围，一不小心就会掉出来，让您精心的布置毁于一旦。@现在，我们为您带来全新设计的250mm模型转盘，让您的烦恼烟消云散！更大的尺寸，完美适配各种模型，无论大小，都能稳稳地摆放在转盘上，随着转盘的转动，展现自己的魅力。@不仅如此，250mm模型转盘还采用优质材料制成，坚固耐用，确保您的模型安全。其流畅的旋转设计让您可以轻松旋转模型，从各个角度欣赏它们的美。@有了250mm模…
If you want to change the color of the letters you need to add a pause at layer #11
After first disappointing experience with inductive z-probe that was originally (FolgerTech Kossel rev.B) mounted with high X-Y offset from the extruder tip, I decided to dismount it and made another E3D mount for additional filament…
Un cartel desmotivacional para aquellos que se pasan el día quejándose de sus rollos
Project for overhangs problem
100x160mm sign, reading "I love my Attitude Problem" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you enjoy…
I drink coffee a lot a lot have told me i have a problem cause i drink a lot of coffee. hope you enjoy this sign as i did making it.
This is a replica of Elmo's totally legal solution to all problems! Whether it's a shortage of money in his wallet, or Rocco stealing his cookie, this will solve all of his problems!
