The source marked this model as adult content.
koralik prst
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
- Downloads
- 29
- Likes
- 28
- Rating
- 0
130 models
The source marked this model as adult content.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Ve škole používám při demonstracích optických zobrazení na magnetické tabuli pětipaprskový laserový zdroj (asi Didaktik / NTL??) . Někdy se ale hodí mít jeden, tři, nebo čtyři paprsky. Doposud jsem to řešil elektrikářskou páskou.…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Medals for the PRS 2026 competitions held in Slavetown
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
I recommend printing from Flexfill 98A, 0.1mm layer, 100% infill. From Flexfill, the ring is flexible and comfortable to wear. Rings with a diameter of 12 - 15 mm have a 1.2 mm thick wall and are 5.8 mm wide. Rings with a diameter of 16 -…
je to kombinace modelu z Mecabrics.com a mé vlastní tvorby v Blenderu.
My previous model was a bit rough and kind of bad on the back stroke. This one is made to be more print friendly. The size of the ring is 53 (EU size; inner diameter 16,9mm). I post 2 models. One is what I use. The other one is mentioned…
I didn't find any guitar rings anywhere. So here is my design. 100% scale is size 50 (EU ring size). Scale as you need. I found out it is better to print flat on the tip. Does not scrape strings. Print with supports on the pad for better…
This is a rugged case for your LORA-Aprs TTGO T-Beam device with SMA antenna plug. Thanks to Breeki for permission to remix and publish. I modified his great work and added clearance for the printed circuit board so that each version…
PRS Truss Rod COVER. If you have only one extruder, You can print with two different color in Cura : Extensions -> Post processing->-Modify G-code-> Add Script-> Filament Change : select the targeted layer.
Bra strap slip buckle is needful aid for every woman. Just pull shoulder straps through the buckle and your underwear will never be protruding out of your top or evening dress. 0.4 nozzle 0.10 layer infill only perimeter Spona na…
Ideální tisknout ve velikosti 29 mm
Ideálně tisknu ve velikosti 29 mm
Must be printed in TPU as the hole is made to fit snug on the radio face. Will NOT work in other materials
The PRS birds are arguably the coolest inlays, they fit the sunset model well, and my guitar case needed a decoration. I made the full and outline bird versions. Tons of colour combos work or use a simple all white or black, whatever…
Features Measures values Temperature (inside not exactly), external in sunshield Relative humidity Dew point calculated Pressure Wind speed - with three blades Wind direction Rain with a resolution of 0.14 mm Ethernet RJ45 connection…
Electric Guitar model based on PRS Mark Tremonti model. STL file is more or less 1:1 scale. For printing I've used 0,3 scale factor, in my opinion it give best results. Neck is divided in 2 pieces for easier printing. Neck head is flat,…
The PRS SE Standard 24 is a popular electric guitar model produced by PRS Guitars, offering high-quality craftsmanship and performance at a more accessible price point compared to their Core line of instruments. The SE Standard 24…
It's a power ring that makes green stuff. Instructions -Measure finger -resize fingerhole in the ring (maybe whole ring?) -print Take the oath: In brightest day, in blackest night, No evil shall escape my sight Let those who worship…
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás prstynek pro holcicku, i velkou slecnu. Jsou na vyber 3 velikosti. Uvidite, ktera vam nejlepe bude a popripade se da…
Zázračný prsteň, ktorý nás zbaví všetkých starosti. Návod: treba ho stiahnuť a vtlačiť ;) ))) Prsteň je navrhnutý pre SL1 tlačiareň. Ak sa vám moje modely páčia, nezabudnite ma podporiť pri ďalších výtvoroch! Print instructions Použite…
Dies ist eine Aufbewahrungsbox für Einlegeringe der Kreg Fräsplatte PRS4034/PRS4038. Auch für das Montagewerkzeug ist ein Fach vorgesehen. Die Box wurde in FreeCAD erstellt, die Zeichnungsdatei ist beigefügt. Einlegeringe für die…
Jednoduchý model prstýnků, bohužel si musíte trochu pohrát s velikostí, ale tisk jednoho trvá cca 10 minut
I am also adding the 3d model file so you can edit the hole diameter and location. I don't know how to design it to be multi-colored. I printed it from black PETG material and painted the "Custom" text white.
Update 2.12.22: step-Dateien hochgeladen / step-files uploaded Einlegeringe für Kreg Fräsplatte PRS4034/PRS4038 Im Lieferumfang sind 3 verschieden Einlegringe, die mir nicht ausreichten. Ich habe daher selbst weitere erstellt, darunter…
Currently Making Upgrades Please be patient. Also Manual in the works. This conveyor can be used to transport your purge pellets to the edge of the table to drop into a trash can. Remove the need to empty that bin behind your printer of…
A headstock for my Printable Fretboard, modeled after my 2001 PRS Santana SE, not 1/1 in terms of it's shape but pretty close! Had to make it a bit longer near the neck to accommodate the screw. Split into separate pieces so the tuner…
This is a modified version to have several different layer heights for multicolor printing.
New design with nicer shaping to the headstock More stability: Gap added for cfk flat bar 3x0,8mm Needs 1 nut M3 and 1 screw M3x15 to M3x20 1 version for (my) USA PRS Custom 24 (1990) 1 version for (my) PRS SE Custom 24 (2019) make a…
This is a mod that is meant to be installed under the PRS bridge pickup ring and allows installing the GK-3 with double stick tape to a raised ramp so that there is no need to expose the guitar finish to glue as well as raise the pickup…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás prstynek pro holcicku, i velkou slecnu. Jsou na vyber 3 velikosti. Uvidite, ktera vam nejlepe bude a popripade se da…
I made this to brace the tremolo of my 2017 PRS SE Custom 22 in a fixed position, effectively turning it into a fixed bridge. This was to help with tuning stability, since I typically don't use the floating tremolo feature of the guitar.…
Description: This 3D-printable vacuum cleaner adapter connects the TACKLIFE PRS02A orbital sander to vacuum hoses with 32 mm, 35 mm, 38 mm, and 50 mm outer diameters. Improves dust collection for cleaner sanding. Easy to print with no…
Print with the top angle of the pen flush against the bed, use maximum supports.
This is a set of custom truss rod covers for PRS SE Custom 24 guitars. The first print plate contains basic, blank covers, including one modelled after the factory-fitted cover and two other shape variations. You could add your desired…
Truss Rod Cover for a PRS USA McCarty 594
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás prstynek pro holcicku, i velkou slecnu. Jsou na vyber 3 velikosti. Uvidite, ktera vam nejlepe bude a popripade se da…
Prsteň ktorý som vyrobil slúži ako hračka alebo aj ako ozdoba ruky.
Funda para e-reader Sony PRS-T3. La tapa incluye zonas resaltadas para piezas magneticas (no imanes) de 1mm de espesor para mantener la tapa cerrada. No se marca la zona de imanes para el auto-encendido porque no consigo que se mantenga…
Návrh prstenu s firemním logem. Logo je samostatný soubor, proto se dá do prstenu vsadit (vlepit) i jakékoliv jiné logo či objekt, který vyhovuje daným rozměrům. Vhodné spíš pro tiskárny SLA.
Rotary Sander Vise holder (TACKLIFE PRS02A) to convert it to a Bench sander for a fraction of the cost. 3D print with support in the position described in the photo of the parts inside my P1S printer. I prepared to allow to reinfoce with…
This set of cavity covers was modelled after the factory-fitted tremolo & control cavity covers on a PRS SE Custom 24-08. The blank cover model can be printed with the outer surface lying on the print bed, so that it picks up the texture…
A replacement tuning peg for the early models of the PRS P20, which were prone to breaking.
This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…
I made this to brace the tremolo of my 2025 PRS Core Custom 24 in a fixed position, effectively turning it into a fixed bridge. This was to help with tuning stability, since I typically don't use the floating tremolo feature of the…
Printsettings: Nozzle 0,4 raft -yes support - yes slow print 0,12mm First layer height 0,12mm layer height ironing - off
Trust Rod cover for the PRS Silver Sky SE with the Core model shape.
protector para fan
Casing for Raspberry Pi Zero + Waveshare GSM / GPRS / GNSS / Bluetooth HAT - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
This print fits Park Tool PRS-2 & PRS-3 Repair Stands with a 44.25mm (as measured) column. With an interior print of 44.5mm the press fit design has enough friction to stay in place without hardware. It has space for the following items:…
This is a replacement for the backplate for the PRS SE CE 24 electric guitar. You can customize it however you like
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
Krabička na prsten slouží k tomu, aby se do ní dal prsten a zavřelo se to.
These were designed to fit the PRS1V4 & BB10 Kit towers Parts should be printed solid in TPU for best results. The front guard mounts using holes in the tower and the rear guard uses zip ties.
Simple ring I made just for fun. PetG, PLA. Better to use light color, silk filament. Outer brim recommended.
PLA, PETG, ASA, BLEND 0.2, 3x primeter, min 20%
A small box with dovetail lid for storage of spare AA, CR1/3N, and 2032 batteries for accessories such as Kestrel, Send-It, and Scope illumination. Uses 4mm x 4mm magnet for lid closure.
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám pro vás prsteny s motivem listu, motivovane prirodou. Pro deti i mlade pani. Vytištěno bez podpěr!!! Pokud vás moje práce…
Prsten s nábojnicí / Bullet Casing Ring velikost / size: 21,6 mm
Created for a specific wedding ring size (23 mm), but it can be printed larger or smaller if needed. I have also added a version without the inner ring holder, making it versatile for other purposes such as holding a necklace and so.
Nabízím prsteny s vystouplými reliéfy , vhodné třeba jako dárek. Jsou k dispozici různé barevné kombinace ale mělo by jít si barvu zvolit dobrovolně. Vnější rozměry všech prstenů jsou 29.75 x 24.60 x 15.31 mm . (Prosím vyzkoušejte a dejte…
These were designed to fit the PRSB401R Kit towers Parts should be printed solid in TPU for best results. The guard mounts using zip ties.
Part of the trigger of my glue gun broke, so I made myself a replacement Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 How I Designed This Calipers, photos and a ruler Category: Parts
Vytiskni, vykroj, upeč a pochutnej si. Dle svého si každý dobarví :)
Držák na náprstky k připevnění na zeď se skrytými vruty.
Model se skládá ze čtyř dílů. Základna se sloupkem v podobě kmenu stromu s háčky + kryt ve tvaru klece + pojistný šroub + záslepka šroubu.
Jednoduchý model prstýnků, bohužel si musíte trochu pohrát s velikostí, ale tisk jednoho trvá cca 10 minut
LoRa APRS Case for 2.4" OLED version 2
Testovací modely velikosti prstenu R06 z aliexpressu. podrobnosti viz tabulka na obrázku
Prsten do kterého lze vložit kousek filamentu jednoduchý ale stylový šperk
Prsten o vnitřním průměru 20.mm vnějším 24.mm. Jméno je na rovné ploše, která vyčnívá o 1mm, jméno je zaryté o 1mm.
Printsettings: Nozzle 0,4 raft -yes support - yes slow print 0,12mm First layer height 0,12mm layer height ironing - off Material: PLA
krabička na prstýnek ve tvaru srdce Category: 3D Printing
Nail Manicure Finger Support
An Adapter for a Kreg PRS5000 Router Lift to suit a 65mm Router. The fit is very tight to make sure its super secure. Options for Smooth or keyed to a Makita RT0700C. Fusion files included. Print Settings Printer Brand: Creality Printer:…
A simple collar adapter for a Kreg PRS5000 router table to support a 65mm Router like Makita RT0700C Options for smooth or keyed for the RT0700C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Model prstového bludiště je určen především pro předškolní děti. Využít ho lze nejen pro hledání cesty, ale i pro procvičení motorických schopností dětí. Je zde lehčí a složitější varianta. Bludištěm se nepohybuje kulička ale jezdec,…
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Mám tu pro vás velmi šikovné kolíky, kolíčky do podprsenky aby Vás neškrabaly draty a podobně. Pokud vás moje práce zaujala, odkazy jsou zde:…
Remixed, enlarged 150% and added 6x3mm recess for magnets
Stáhněte si model do počítače; otevřete PrusaSlicer a model importujte.
1.5 ml and 15 ml adapters for free swing bucket rotors used on soewall centrifuges tested on H6000A upto 6000 G
95A tpu from anycubic supports on 0.24mm layer height .04 nozzle
LoRa APRS Case for 2.4" OLED version 1
This is an ereader stand, an other one ! But specifically for the Sony PRS-T2 ereader (don't print it for kindle, kobo... the spacing for your tablet may not be ok, you may not insert your ereader or it may be too loose) I ve made this…
Žáci vytvoří model parabolického a sférického zrcadla. Sledují úhel dopadu, odrazu a fokusaci světelných paprsků. Pomocí koncentrovaných slunečních paprsků lze zapálít papír.
Tyto miniaturní modely štítů byli vytvořeny na základě předlohy filmu pán prstenů mohou posloužit pro testování. Doporučuji použít límec.
prsten z nápisem sigma vyroben v tincercad 😉
Použitá doska je ASR6502. Materiál PETG/PLA/TPU. Bez podpier.
Vyrobil jsem prsten kompatibilní se standardními stavebními kostkami LEGO - skvělý způsob, jak nosit své výtvory všude s sebou! Dostupný je ve třech velikostech: 60 mm, 56 mm 52 mm (obvod prstu). Pokud byste chtěli jinou velikost, dejte…
I couldn't find a control box for my router table so I made it like this. I created everything in Prusa Slicer so it's in *.3mf format. The models look a bit strange without negative volumes (I don't know how to convert to *.stl yet and…
Wall mount for the Park Tool PRS 5 stand.