The source marked this model as adult content.
- Downloads
- 49,199
- Likes
- 12,528
- Rating
- 4.75
2,919 models
The source marked this model as adult content.
The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…
F1 logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Cyberpunk Kitsune. This would make for a nice wall hanging. In prusa slicer right click on model → add negative volume -→ gallery -→ universal wall mount hole. -→ align to your liking. or do a negative boolean and make it a mask.
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
Damn, kid. Lucky you had these. Maybe stick to four wheels next time; leave the bikes to that partner o’ yours. These crash pads really do the job though, huh? Some of my patients rock just one or two, but four on each arm is the way to…
Heck yeah! That is how it’s done. I simply cannot believe we pulled that off! Perhaps not the cleanest job, but not bad for a spur of the moment thing. Wait until Saul sees this… Ha! He’ll have smoke coming out of his ears! Yikes, you…
Steam Punk geared light switch made from multiple 3D printed gears & hardware. Note that it is designed to fit over the existing wall cover for safety considerations.
Steampunk Goggles specifically designed by Double Bass player Stjepan Horvat for band Scifidelity Orchestra ( Facebook , Youtube Channel , Instagram ) with their logo on the side of the goggles. Design for the lenses was inspired by…
NASA Worm logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best…
Coaster with Punisher logo - not necessary multimaterial. Other coasters on my profile. Printed in PETG because temperature resistance. Simple print - change colour in layer.
Simple but Cool Flat Button
Steam Punk Gun by Allen Tseng Fixed and added UV displacment for details. note: the .obj file is one solid object if you want to use it for a figurine or the ilk. This was a hard fix. More steps than usual due to differences in poly…
I designed this logo to be as close as possible to the original Cyberpunk 2077 logo. Unlike many existing models, this version is not simplified and is based directly on the Cyberpunk 2077 svg available on Wikipedia, ensuring accurate…
This is quite simply a math joke. I've seen the joke in a few places, including The Simpsons. I'm not sure who originated this joke, but it's fairly tame and I think it's easy enough to figure out. It might make a good gift for a math…
this is braindance model from cyberpunk (easy version)
made this because who doesn't like the punisher. Weight is estimated not actual weight
I'm not a fan of stickers so I created a 3d printed version of the punk rock shirt and belt design with filament swaps. Note this should be scaled to any 10:1 scale Lego model. Note I used 0.20mm layer heights. Punk Neck: All white for…
Print with .3mm layers and one or two color changes. If you print the bottom with a non-black colour, you can write your contact info there with a marker in case you lose your keys! Have fun printing and don't forget to post your makes!
Punic zoomorphic Askos (late 5th century BC) The use of this type of vessel was frequent among the Phoenicians, Greeks and Cypriots, being related to the afterlife. In Ibiza there are mainly representations of doves (symbol of the goddess…
Accessory parts for noticeably big, variable CG Scale. All the way from a F3x glider to anything like a 25kg warbird or jet! Additions and some remixes of the original CG scale parts from here ……
Hey there, i made this tool holder cause i noticed that you have to be very precise with the letters not to smash your hand. I work in a locksmith with my grandfather and we mark every key we copy with the letter “R” in order to ensure…
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
/// Puntero bastón guía Realizado por el Área de Tecnologías Inclusivas del Centro Comunitario de Rehabilitación (CCR) Collipulli - Departamento de Salud Municipal Región de la Araucanía, Chile Encargada: María José Opazo / Diseñadora…
Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…
Punic Grimacing Apotropaic Mask (Carthage / Phoenicia) Punic Apotropaic Mask, originating from the Carthaginian Empire (centered in modern-day Tunisia) and its Mediterranean colonies around the 6th to 4th century BCE. The Apotropaic Grin:…
Hope you got use for it, i did =)
I found the Core Puncturing knob on top of the KegLand Mini 360 Core Regulator to be quite hard to turn with low grip when the system had pressure so I made this. I printed it in PLA and it works fine, PETG should be fine too. I haven't…
simple door sign with punk skull design. The name tag is blank. Simply insert the desired name or saying into the slicer, scale it to the desired size and start printing. Printed with Bambu A1 mini. PLA silk Supports: yes / organic…
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Fan shroud for Prusa printer MK4. I have designed by my own with model of Punisher mask downloaded from printables.com
Please support this model it will go a long way and help with design better versions just by liking and downloading 😀 Print Settings Supports: Optional Rafts: Optional Resolution: 0.2mm Infill: 15% Filament: Pla Assembly You will need all…
its a mini swivel punching bag not much to it all you have to do is put the main stick through the plate you can tape it if you want then put the smaller stick through the hole in the bigger one then place the swivel part that you hit on…
Do you feel lucky, Punk? A yellow warning triangle with an unhappy cat.
I recommend printing this with 5 or more perimeters and similar top and bottom layers. Then gyroscopic 10% infill and you should get a pretty solid tool tray to hold your ironworker punch and die sets. The pics I am including show…
This case fits a set of Hiltex metal punches. They are heavy--their original case quickly broke at one corner as it was not strong enough. If it does not fit your set, use the scaling capabilities in the slicer to adjust it. Pro tip: cut…
Check out the redesign with easier to print hinges and a better latch design: https://www.printables.com/model/1252247-just-in-case-print-in-place-pun-box I was following a tutorial for print in place hinges and saw a similar item on…
For the mesh lens .stl or .3mf to print properly so that the insert is the through set: Top Shell Layers to 0 Bottom Shell Layers to 0 Infill Density to 25% Infill Pattern to Rectangular.
Edit July 17 2023: Added symbols $ % # € ! ? & Edit August 6 2023: Added special characters like Ü Ö É Ç Å At 100%, the letters are roughly 13mm tall (or about ½ inch). I tried scaling down to 65% (8mm letters) and that still worked. Try…
Steampunk Light Switch I made a steampunk style light switch for my son's room using this really cool paint with metal partials that actually rust. You can find; print, paint, and assembly instructions in the video. Here is a list of the…
Punisher inspired design for guitar pick. Easy to print: PLA 100% infill No support
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
Steampunk inspired chess set Supports: No Layer height: 0.12/0.2 mm
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Oni Cyber Punk Mask by SeanAranda From Thingiverse. Posted here due to Thingiverse losing popularity and Creator being MIA for over a year. I have also added the remixed version that is preassembled. A brilliant design i wanted to share…
Bring a futuristic touch to your desk with the Cyberpunk Phone Stand. Designed with bold geometric lines and mechanical details, this stand reflects the raw aesthetic of cyberpunk culture. It is both practical and stylish, making it…
Mechanical Steampunk Skull
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
This is a remix as mentioned in the summary. I made this for a friends birthday and modified it to fit a standard 32x8 LED Matrix from Amazon. The modified files are the ear cups (threaded and hollowed to house electronics) and the front…
Created various steampunk gear-themed keys in Tinkercad (remixed from multiple sources). Rub 'n Buffed with antique gold and gold leaf. Check out my blog for more details on this and other steampunk gear I made:…
I designed this knife in late 2020, early 2021 based off a keychain my friend had. Although I know there are many designs like it now, I was unable to find any prints on any other sites so I opened up Fusion and set to work. It was one of…
I think it will come as no surprise when I say that many of us here at Prusa Research are not just technology geeks - we’re avid gamers as well. Some of the luckier members of our team already got their hands on the PlayStation 5 (even Jo…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Supports…
This is a remix of a remix. I took this model https://www.thingiverse.com/thing:3551422 from thingiverse and repaired the mesh. I also fixed some unnecessary overhands and added a semi-hollow version that's kind of like a finger puppet.…
Skull-shaped toothpick holder. Just add toothpicks and turn him into a punk! This model is based on the “Skull” model from the autor “trialogy”, since designing my own skull model would require a lot of time and experience I currently…
The Secret Storage Book –Steampunk Edition is a mechanical addition to my Ornate Book series, created for those who appreciate functional detail and hands-on assembly. While earlier designs focused on decorative embossing and hidden…
Assembling guide on Youtube: https://www.youtube.com/watch?v=hUhmg1zEbRY BILL OF MATERIALS: - 220/110V plug - plug type depends on the country - R13-112A switch - https://s.click.aliexpress.com/e/_AX8eMl - 256 pcs of M4x16 screws (DIN912)…
Steampunk key ideal for costume accessory. Try to use black filament and then color it with a gold tint as shown.
A diorama created as a collab by the designers Wekster , Dsk001 and The3Dprinting . Thanks guys! You can either print them in multiple pieces (no MMU needed) to have a multi-color model or you can use the single color version to print…
Mini Punisher Fan Art project based on the highly successful Marvel characters
🦴 Steampunk Skull with Attitude – 3D Print Ready! 🕶 Add a dash of mad science and a sprinkle of Victorian flair to your 3D printing collection with this original Steampunk Skull ! Whether you're into cosplay props, desk toys, Halloween…
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Multiple scales are in ZIP files (1/18, 1/12, 1/7), download whatever you like. Picture with recommended print orientation of parts is included in ZIP (but it's…
Punisher with some curvature. Could probably reduce the polycount a tad. Feel free.
Punk Duck – The Rebel of the Bathtub! 🦆🤘 Meet Punk Duck , the ultimate statement piece for your 3D printing collection! This isn't your average rubber ducky—this mohawked rebel is ready to make waves. Whether you want to add some…
3D MODEL DESCRIPTION Mad Max style Wearable Mask for 3d print 3D PRINTING SETTINGS PLA / PETG 0.2 layer
F1 logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Braindance Wreath from Cyberpunk 2077. Full sized and wearable, this is the perfect finishing touch for Judy Alvarez and other cyberpunk cosplays. The model and documentation were made with maximum effort and intended to be a product, but…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
Cyberpunk 2077 logo. 150mm X 37mm X 10mm. You can change Z height if you want to make it thicker or thinner. Print instructions Rafts: Doesn't Matter Supports: No Resolution: 0.2
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Supports needed as shown on the images
The original was too big, also the hinge was very thin. I designed the box from scratch with better hinge and latch. Also added extra tolerances to close the box. Fusion360 file attached if you want to remix it. Update 2023/03/27: Added a…
Daft Punk Thomas Silver Helmet! Update Oct 2024: Recreated this version 2.0 from scratch. There were a few features that were bugging me with V1, so I created a new and improved model including mounts for LEDs All parts rotated to print…
Create a mysterious and unsettling look for Halloween with this detailed plague doctor mask. Inspired by historical plague doctor masks and steampunk aesthetics, the design features a long curved beak, round eye lenses, mechanical…
A raven perched in steampunk design, with gear-like wings, riveted feathers, and pipe decorations.
3D Punisher Logo Emblem Print with a color change right when the skull starts. There are 3 cutouts on the back sized for ½" 3M double sided tape. (or magnet strips) Logo is apx 3" wide x 4" tall Print Settings: 0.2mm Layer Height 0.4mm…
A steampunk-ish version of the cute articulated octopus with glasses, beard and ears. Can be printed without supports. The first image shows the version with the smaller head, the other images the version with the bigger head. Original…
I heard this joke and loved it so much I had to retell it… Just In Case. The design aims to look like a tiny tool case. It prints in place with a moving hinge and handle. I’ve included solid and multi-material versions. If you shoot a…
This model has three parts and prints with no supports, the bag screws together with threads and has holes to put catnip inside. It may be smart to scale down the top of the catnip container in the X and Y, but I was able to wear in the…
Hey chooms! What’s going on? Everything Nova? I heard you´re David´s fan. If you wanna join Maine´s crew you should definitely print this preem logo, unlike that gonk, newbie from Wakako…ehh. Anyway here, have a drink! See you around then…
This model was inspired by a combination of other models one by 3DPRINTINGWORLD , who included a method for giving the prints a Pantene finish ( https://www.thingiverse.com/thing:3783279 ) and the other LoboCNC…
Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…
The Punisher Skull logo in 3D. 5mm high.
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
We would like to show off something unusual – a custom-made modded Original Prusa i3 MK3S. This one was made for “Tested”, specifically for Adam Savage, as a gift, because we now that Adam is a big fan of the steampunk. Steampunk is a…
Best at this size, going too small loses detail. Created in ZBrush.
Una nueva arma para la colección DUMMY 13
It's a M-10AF Lexington from Cyberpunk 2077 with movable magazine and shutter Videos about this model: https://vm.tiktok.com/ZSJBu1mJ2/ https://vm.tiktok.com/ZSJBmwtf6/ https://vm.tiktok.com/ZSJBujJXk/ Print Settings Printer: Artillery…
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
This is the Relic made for 3D-printing. The "The_Relic_2077" map contains several files. The uses of these files will be discussed here. For 3D Printing: The model is cut into 3 parts. The silver outline, the inner black part and the…
Pillikan is a very easy-to-print pill puncher to help elderly or disabled people open pill blister packs. It helps to apply the required force to easily open the blister pack on almost any size of pill. The small container underneath will…
My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…