Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD
Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…
- Downloads
- 257
- Likes
- 83
- Rating
- 0
101 models
Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…
The second piece of the adapter must be mirrored. The model is split for easier printing.
I made this remix for more buckets variants, easy print without supports and filament save. I change thicknes of deviders for more space. I printed all models from PETG for better durability with 0.8 nozzle and 0.4 layer height. On the…
I made this spare compartment in more versions, because ⅓ partition you cannot buy. I'm also made this compartment little bit higher, for reduce gap between top cover and compartment. I will be glad if you leave a comment with the foto :)
I ran out of organizer inserts so I made my own. Have a nice used.
Today, I present a gigantic set of buckets designed for the well-known and popular Qbrick system, though of course, it can be used for other purposes as well. I modeled the buckets to maximize the space inside the Qbrick organizers and…
A fully printed adapter to mount stuffs to the side of the Qbrick System Pro boxes. The original one is M8. The diameter is 13.1 mm if it not taut enough you can scale up a little or edit the Fusion modell. I suggest to use the M8 version…
Toughbuilt ClipTech mount for Qbrick System inserts
QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers
This helps to divide compartmets in Qbrick system two organizer MULTI into smaller boxes. Original box (organizer) has three different sized compartments (see image below). For each compartment there is folder containing .stl files for…
Tested on Qbrick Pro boxes, but I think it will also work on others that have installed inserts. PetG or Asa recomended. Supports have already been added.
Hex bit Trey for Qbrick Pro drawers or shallow organizers I split the model in Prusa slicer with the dovetail tool For me the bits have a slight loose fit so they will fall out when held upside down
Adaptor to extend Dewalt Tstak to make it possible to lock on top of the QBrick Pro cases. Print two pieces, the version number should be on the bed and there is a need for support. If you can use the multilateral and separation filament…
Tištěno z PETG trysky 0,4mm vrstva 0,2mm, 4 stěny, náplň 20%. V úzkém místě, kde jsou otvory pro zoubky klik z krabice, je dobré pomocí modifikátoru nastavit 100% vypnutí. @S adaptérem je třeba vytisknout 2 vložky pro umístění na krabici…
The model includes only a holder - Qbrick connectors are needed for correct mounting in boxes. Fits two sizes of popular paper towels - small and large. It also fits two kinds of internal roller sizes.
Reimagine your Qbrick System with modular compartments to elevate your storage and organisation experience. Precision-engineered and built to integrate seamlessly into your Qbrick setup, these sturdy compartments bring style and…
I needed more Qbrick containers and wasn't satisfied with the ones I found online. So, I decided to design my own, adding extra accessories as well. Stay tuned for more ready-to-print accessories! ##### 10/01/2024 - Added STL files and…
Qbrick System TWO Organizer Multi is great for bigger nails or screws but if you have lots of smaller items it may be difficult to grab them from the bottom and also a lot of space is wasted. These trays take two spaces, fit into both…
Holder for mounting the Qbrick tool box into the insert for small boxes, Printed from PETG nozzle 0.4, layer 0.2, 3 perimeters infill 15% gydroid. I have attached the model in .f3d format for possible modifications.
Adapter to connect to qbrick system, it allows to connect flat piece to qbrick and use it for different purposes: As an
Gridfinity Baseplate for QBRICK System PRO Drawer 2 and 3 ⚠ Choose the version you print! Drawer 3 and Drawer 2 bases aren't interchangeable. This custom Gridfinity baseplate is designed to match the internal contour of the QBRICK System…
In the bucket is 13 posistions for comlete drive socket set (from 4 to 14) plus one position for reduction to ¼" hex bits. All drive sockets must be max. 25mm height. Drive sockets posistion is designed for holding in the possition by…
Inlay for the QBrick ONE/PRO Tray to maximise your storage space. The inlay can be easily clipped into the QBrick tray.
Adapter to fit an M6 Wurth rivet nut into the lateral hole of the Qbrick System Pro.
printed from PETG, nozzle 0.4mm; layer 0.2 mm; 3 walls; filling 15% gydroid
Model je tištěný tryskou 0,4mm vrstvou 0,2mm 2 stěny a vyplnění 10% neni mechanicky namáhaný takže dle mého soudu bude stačit PLA
Mineral water holder for Qbrick box by inserting it into the original connector. Printed from PETG material, nozzle 0.4mm, layer 0.2mm, infil 15% gydroid
It is an adapter for QBRICK boxes, and more specifically the ONE system, and more precisely L and M organizers. With these adapters you can hang these organizers on the wall or any stable surface. You need to print 2 pcs right and 2 pcs…
Set of containers. The naming convention is like “1x_*” - means the insert for the smallest container, “2x_*” - the double one. Then “double” or “triple” in the name means that the insert is divided into 2 or 3 separate spaces. The bit…
Pins made from a nail expanded by a pen spring, which facilitates installation in the target location.
Here is an original design with parametrization…
I want to make an organizer for my Qbrick big boxes without any walls for some big tools. It's just a blank box for you creative inserts) Print tips: main body can be printed diagonally at 220x220mm bed easily if you can make good…
The height of the holder is designed for discs stable possition during transport. Holder is universal for all discs sizes. Tinkercad link: https://www.tinkercad.com/things/5ia4a3sgbZP
printed from PETG nozzle 0.4mm; layer 0.2mm; infill 15% gydroid. Suitable for drinks in metal cans 0.5L
Handle for Qbrick One 2.0 box with allteraint wheels. To assemble, you need 4xM8 screws and tube 28mm.
I made this short handler for the Qbrick bucket for my Qbrick Toolbox 2.0 mounted on one of compartment.
Qbrick System Prime - adapter, workbench connector Adapters are used to connect any large plywood or other board material to Qbrick Prime System crates. The 3mf file comes from Qidi Studio. My printing suggestion: Walls: 6 Top and bottom…
It is an adapter for QBRICK boxes, and more specifically the ONE system, and more precisely L and M organizers. With these adapters you can hang these organizers on the wall or any stable surface. You need to print 2 pcs right and 2 pcs…
Petg layer 0.2mm 18.39gr
I bought the QBRICK Pro 300 to better organize screws, bolts, and small accessories, but once it arrived, I realized that the available compartments were too large for the size of the pieces I use. I found some replacement trays on…
A connector for linking horizontal dividers in a Qbrick tool organizer, allowing you to create a long horizontal partit
Tested on Qbrick Pro boxes, but I think it will also work on others that have installed inserts. PetG or Asa recomended. Supports have already been added.
Organizer for 1/2" socket to Qbrick Pro drawer. For complete set from 10 to 36
Przegrody dostosowane do Qbrick System Pro Organizer 300. Nie wymagają kleju do montażu. Nie wymagają podpór do druku. Ustawienia podstawowe/domyślne. Ja jedynie zmieniłem na 3 ściany. PLA jest chyba wystarczający do tego celu. Wsuwają…
Bucket holder for Qbrick Custom Connector system
Holder printed with PETG for a classic coffee cup. nozzle 0.4, layer 0.2, 2 perimeters, 20% gydroid filling
Big bed required 300x300mm Recomended bins height 09 (67mm) or less. https://www.printables.com/model/774585-light-gridfinity-bins-collection-with-magnet-only/files
Toughbuilt system adaptor to Qbrick. Two versions - Custom connector insert and M8x20 allen screw mounted holder.
This model allows you to mount a small IKEA Skadis pegboard onto the side of your Qbrick toolbox , creating a modular and flexible way to store tools and accessories. The setup uses two 3D-printed adapters that attach to your toolbox with…
Uchwyt pasuje do Qbrick System Pro 2.0, One 2.0, Prime i wykorzystuje oryginalne Qbrick connectors. Składany taboret występuje pod kilkoma markami, więc nie będę ich wymieniał. Potrzebne będą: oryginalne konektory Qbrick (te czarne…
Hook to fix tray into the QBrick ONE tool box.
Wrench stand printed from PETG
You'll need Pin-6х35mm 2 pieces Bolt-M8x20 2 pieces
Designed for Qbrick M8 threaded mounting system
Parkside battery 20V holder for Qbrick system
I printed the final version in PETG with 25% gyroid infill. This adapter should be quite heavy duty, I calculated the gyroid infilled printed version with Prusament PETG to have a failure load of around 250 N per adapter, so 50kg of…
QBRICK box holder for IKEA SKADIS board.
Containers in the qbrick pro200 organizer Petg No supports
Insert to Qbrick drawer pro for gola Parkside
Designed for a QBrick One Drawer 3 Toolbox 2.0. Also fits my Drawer 2, albeit a bit tightly. Might be manufacturing tolerance. Compared to QoTheGreat's , it has half a row less on Y, but it's more economical to print, fits the MK4S bed…
Qbrick System PRO Toolcase modification for Sonel Multifunctional Electrical Installations Meter MPI-50x Set: Multipropse box Earth resistance cables box Crococlips holders High Voltage probes holders Earth resistance rods holders…
Potrzebny był mi uchwyt na statyw do skrzyń Qbrick System Pro, a oryginalny uchwyt do długich przedmiotów okazał się za wąski, więc zaprojektowałem ten zestaw. Wykorzystałem oryginalne konektory Qbrick (foto) te, których miałem najwięcej.…
If you have to remove big vertical separators in drawer for space but want to keep horizontal for organization.
Inert to carry drill, 2nd battery and accesories in qbrick case designed for QUBRICK - organizer / system ONE 2.0 M PLUS Metabo 12v grill / Power Max PetG recomended but PLA should Work fine I insert foam in the buttom
Story time I'm using Qbrick Pro system to hold all of my tools and stuff in my workshop. I was slightly annoyed that Pro system doesn't have anything higher than Toolbox (except Cart which is annoying to put on a shelf). Toolbox can…
Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…
Tray for Bosch Gluey to qbrick drawer.
Now released my custom organiser In the future, I will release a STEP file with basic drawer-filling for your custom organizer.
Qbrick system one drawer lock. Одна часть замка ящика Qbrick system one.
Qbrick Pro holder suitable for wall mounting for hanging the cabinet. Best printed from PETG 4 perimeters 100% infill
Insert for Qbrick System PRO Organizer Multi 16470 and Brother PT-H110 Label Maker, integrated holder for 6xAAA batteries and room for spare tape.
Pro max. pevnost je třeba přepážku vlepit nebo přišroubovat. Like potesi dekuji.
Organizer for tool box Qbrick sustem PRO 600 Basic
Custom can holder for Qbrick system custom connectors. Designed for Qbrick M8 threaded mounting system
I like to have my toolboxes labelled to quickly know what is inside them. These signs/tags are for the QBRICK SYSTEM 2 toolboxes. The “base” of the tag have 2 words subsided/recessed (so to later print those words in different colors - I…
Let me know what other accessories for Qbrick connectors you need :) Designed for Qbrick M8 threaded mounting system
Možnost osazení na boxy 1.0 (bez otvorů pro závitové vložky) pro použití s CUSTOM adaptéry. Testováno na boxech PRO
Pick the matching file for your drawer config. The regular version fits the " Qbrick System One Drawer 3 " toolbox, while the tall version is made for the Drawer 2 toolbox (the one with two equal sized drawers)
šířka 53mm, výška 60mm vnitřní průměr 49mm 2x M3 10mm 2x M3 matka šestihran Na QBRICK lze umístit 2 držáky vedle sebe. Pomocí šablony (obr. zelená) vyvrtat 2 díry 3mm a zevnitř přišroubovat na pořadač.
bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493
Same idea as the original model. But in a taller version which works for the Qbrick System One Drawer 2 Toolbox.
Náhradní díl pro dvojitou rukojeť Qbrick Cart
See my other qbrick related projects:
You can move your lamp with qbrick cases - even setup workspace if needed :) Simple print, no supports needed. See my other Qbrick projects:
See my other qbrick related projects:
Simple project to have additional mounting for your cables / ropes. No supports needed
Pins made from a nail expanded by a pen spring, which facilitates installation in the target location.
Uchwyt pasuje do Qbrick System Pro 2.0, One 2.0, Prime i wykorzystuje oryginalne Qbrick connectors. Składany taboret występuje pod kilkoma markami, więc nie będę ich wymieniał. Potrzebne będą: oryginalne konektory Qbrick (te czarne…
bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493
Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…
Qbrick System Prime - adapter, workbench connector Adapters are used to connect any large plywood or other board material to Qbrick Prime System crates. The 3mf file comes from Qidi Studio. My printing suggestion: Walls: 6 Top and bottom…
Možnost osazení na boxy 1.0 (bez otvorů pro závitové vložky) pro použití s CUSTOM adaptéry. Testováno na boxech PRO
Now released my custom organiser In the future, I will release a STEP file with basic drawer-filling for your custom organizer.