1 / 4
Qbrick System - 10mm 12mm TPU workbench corners
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Qbrick System - 10mm and 12mm plywood workbench corners.
The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue.
I printed them with TPU to make them soft.
The 3mf file is from Qidi Studio.
My printing suggestion:
Walls: 2
Top and bottom layers: 3
Infill: 15%, mesh
Supports: none
02.02.2026 - I added corners to the 10mm plywood
With TPU, I suggest printing one corner at a time.