Search results: qc

Sort order

217 models

P
PrintablesAdam Kimmerly

QMX / QCX / (tr)uSDX Knob

Let's face it, the standard volume and tuning knobs for the QMX, QCX, and (tr)uSDX aren't great. I set out to make them a lot better. Here's my solution. Print these top-side down, then use some M3 set screws like these…

Downloads
332
Likes
39
Rating
5
P
PrintablesVictorDenisov

QCX mini/QMX case

This mode is a remake of QCX-mini stand/case from thingiverse. This model fits more snugly than the original case. I used lightning infill with PETG. It made the case a bit more elastic. Still serves the purpose quite well. I attached…

Downloads
142
Likes
18
Rating
0
P
Printablesprintables555

Smoothed QMX / QCX / (tr)uSDX Knob

This is a remix of Adam Kimmerly's (K6ARK) QMX/QCX/QDX/(tr)uSDX knob. The original K6ARK knob is an excellent design, it is low profile, light weight and makes the tuning knob very easy to spin giving the QMX more of a full size desktop…

Downloads
39
Likes
5
Rating
0
P
Printableswinqooq

SW3518s 100w PD/QC/SCP charger board case

For fixing module screw - M2, for fixing panels - M2 or M3

Downloads
28
Likes
6
Rating
0
P
Printableswinqooq

Holder CKCS U1E (HW-774) PD/QC/SCP charger board case

Screws for fixing the panel - m3 Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm) and HW-774 (Chinese copy with worn-out markings) Screws for fixing module - m2 (6-8mm)

Downloads
20
Likes
8
Rating
0
P
Printableswinqooq

Makita sw3518/SW3516 QC/PD charger

For assembly you will also need a ready-made bayed DIY-power adapter from China or a print -- Makita 18-21v bayonet holder DC-DC Up module - HW-449 TL494 voltmeter 0,36" DSN-DVM-368 v3.01 22х14х10mm (4.5-30v) of course SW3516/SW3518 + M3…

Downloads
13
Likes
4
Rating
0
P
Printablesrj_ruin

QCX/QMX mini kneeboard/lapdesk

Designed to hold the radio on the right side and the battery below it. I held them both together with my wife's hairtie. Then the left side has three versions depending on what size notecard you want to use or to hold your phone. The…

Downloads
13
Likes
3
Rating
0
P
PrintablesKrazy_Kid59

FN MK-17 (SCAR-H) (CQC Variant) Blue Gun/Red Gun/Training Gun

DISCLAIMER: THIS IS A GUN MODEL WITH NO FUNCTION. IT HAS NO MOVING PARTS, AND IN NO WAY CAN WORK AS A FIREARM WITHOUT MODIFICATION TO THE MODEL. FURTHERMORE, THE DESIGNER OF THIS MODEL IS IN NO WAY RESPONSIBLE FOR ANY ILLEGAL ACTS…

Downloads
2,001
Likes
117
Rating
5
P
PrintablesBarBarBarbucha

IBC M100 QC

IBC_M100 with quick connector

Downloads
616
Likes
39
Rating
5
P
Printablescjnaz

ACME / QCC Type 1 propane female cap and male plug

The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose…

Downloads
601
Likes
53
Rating
5
P
PrintablesHanz_Grau

Case for QC USB charger (XFW-KC42-4)

Material: 4pcs countersunk head screw M3x6 4pcs M3 thread insert Model: https://cad.onshape.com/documents/0d407fe5de31bdb0b7bc3c3a/w/b262644aaedd913f842146de/e/04ab4ae53c01857c155ed3c5

Downloads
550
Likes
42
Rating
5
P
PrintablesCHARLY UY

Comb for Phillips QC5115 hair clipper

Comb for Phillips QC5115 hair clipper

Downloads
474
Likes
30
Rating
5
P
PrintablesDominik Pechac

DIY Powerbank 40.000mAh 18650 QC4.0 Dual USB 5V 4.5A 22.5W

A case for a power bank control board that fits 17x 18650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast charging, 1x…

Downloads
447
Likes
45
Rating
0
P
PrintablesKaraB

MC4/QC4 Tool

This tool is used to disconnect MC4/QC4 connectors found on solar panels. QC4 connectors have a shroud around the barbs holding the connector in place and this tool is designed to fit in between the barb and the shroud. The back can be…

Downloads
356
Likes
18
Rating
4.8
P
Printablesyotebuster1200

AXA QCTP Tool Holder Rack

This tool post holder rack was created to help organize my lathe workspace. Initially, I am posting the tool holder rack that fits my lathe perfectly. In the next couple days, I will update the design to include a bigger opening for the…

Downloads
284
Likes
25
Rating
5
P
PrintablesJamehz

Case for QC3.0 QC2.0 USB DC-DC Buck Converter, Charging Step Down Module 6-32v

Bought this 2 port DC-to-USB buck converter, and needed a case for it. Here's the item: https://www.temu.com/goods.html?_bg_fs=1&goods_id=601099513216091 It's pretty straightforward, print both sides flat as in the STL. My DC plug…

Downloads
273
Likes
29
Rating
0
P
PrintablesRanTheLab

Bose QC 35 trim ring

After replacing the cushions on my Bose QC35 headphones 3 or 4 times, the flexible trim ring around one of the earpieces broke. I designed this and printed in TPU (probably not really necessary). Printed on MK3S+ at .15mm layer height.…

Downloads
271
Likes
13
Rating
5
P
PrintablesYvesVO

Quick Change Picture Frame (QCPF) A5

To celebrate people downloading my designs 1000 times I designed a picture frame for A5 pictures (210 x 148). The frame is easy to print and easy to assemble (no glue needed, but it can be used if tolerances are not tight enough). Once…

Downloads
265
Likes
27
Rating
5
P
Printablesrorys3D

Extended hair comb for PHILIPS QC5115

A friend asked me if I would make an extended version of the comb for PHILIPS QC5115. So I made one ;). This model allows to adjust height from 25mm to 40mm. I used a screw to secure the height, which seems like a good solution for 3d…

Downloads
233
Likes
11
Rating
5
P
Printablesandy

MC4/QC4 Disconnect Tool for Confined Spaces

This tool is used to disconnect QC4 connectors that are compatible with MC4 but have a shroud around the barbs holding the connector in place. Disconnect tools like the one delivered with the Marstek Jupiter C+ may not work with QC4.…

Downloads
213
Likes
18
Rating
5

21700 4s PD QC 100W Power Bank Enclosure

Adaptation of a power bank PCB from Aliexpress with all major quick charging protocols and cell balancing. Holes are almost necessary. Heat output is around 10w in the worst case scenario. Cells overheat at maximum charging power even…

Downloads
204
Likes
29
Rating
0
P
PrintablesLeo DIY

QC4.0 PD3.0 power bank

refinished my old power bank which does not support fast charging technology you can build your own fast charging power bank with 2, 3, 4 or 6 18650 batteries the fast-charging module I purchased is…

Downloads
202
Likes
27
Rating
0
P
PrintablesMAZA

QC4.0 Power Bank

Krabička pro sestavení powerbanky s elektronickým modulem QC4.0 https://www.aliexpress.com/item/1005004645663172.html?spm=a2g0o.order_list.order_list_main.4.4bf31802NGOD01…

Downloads
192
Likes
39
Rating
5
P
PrintablesDrawde Ereves

Case for QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V

Case for a very successful fast charging module powered from 6V to 35V QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V … https://aliexpress.ru/item/4000315671112.html

Downloads
185
Likes
24
Rating
0
P
PrintablesReProps

CQC-42 MACHETE HELLDIVERS 2

Modeled this from the new war bond. Takes some pieces of 1.2 in rod. split for printing. aprox 32 inches long. Category: Props

Downloads
179
Likes
39
Rating
0
P
PrintablesReProps

Helldivers II CQC-5 Combat Hatchet

takes a length of 1/2 in rod. split for printing. Category: Props

Downloads
175
Likes
40
Rating
0
P
Printableshi_im_sean

AXA QC indicator holder for lathe

Indicator holder for AXA quick change tool posts. Modeled on a Phase II 900-102 but it fits every other no name Chinese indicator I've tried. Indicator secured with an M3 screw and nut. Works in the facing direction as well if flipped…

Downloads
169
Likes
17
Rating
0
P
Printableskennyd1gital

Akro/Uline Bin Bracket for Lee APP on IF QC Plate

A bracket for mounting a collection bin (Akro/Uline type) under the exit ramp of a Lee Automatic Processing Press (APP) mounted to an InLine Fabrication Quick Change plate. The bracket indexes off the right mounting bolt on the APP and…

Downloads
168
Likes
32
Rating
5
P
PrintablesAlexander Kromm

QC 22W Power Bank

Parts used 22.5W Powerbank Module: https://de.aliexpress.com/item/1005004890964771.html?spm=a2g0o.order_list.order_list_main.180.37455c5f2DXuH7&gatewayAdapt=glo2deu 8x M1.4x4.5 Screws (i guess you could also just glue the lid in) 5x 18650…

Downloads
167
Likes
19
Rating
0
P
PrintablesSean Riley

QCX/QMX Desktop Stand

A simple little stand to hold my QRP-Labs QCX/QMX QRP CW Transceiver on my desk. It can be orientated in a 30° or 60° angle for easy viewing. In fact I may even take it to activate a POTA so the transceiver sits nicely on a park table.…

Downloads
167
Likes
21
Rating
5
P
Printablesoe7mbt

QRP Labs QCX+ (plus) Housing

Housing for the QRP Labs QCX+ (plus) CW Transceiver https://www.qrp-labs.com/qcxp.html Currently in progress …..

Downloads
157
Likes
8
Rating
0
P
PrintablesYvesVO

Quick Change Picture Frame (QCPF) 10x15

I redesigned my A5 picture frame for 10x15 pictures (4" x 6"). The frame is easy to print and easy to assemble (no glue needed, but it can be used if tolerances are not tight enough). Once put together there is a slit on the side (or on…

Downloads
153
Likes
13
Rating
0
P
PrintablesReProps

CQC-20 Breaching Hammer

takes 35 inches of 1/2 in rod and some 6mm x 2mm magnets for the head. i also uploaded all the parts individually for those who cant use the step or 3mf. Category: Props

Downloads
145
Likes
19
Rating
0
P
PrintablesWojtekG

Snap case for QC USB A&C Charge Step Down Module

I tried to find a housing for the module, but without success. Based on a simple parametric housing with latches, I present my first project. Module available Ali when searching "QC4.0 QC3.0 1 Way USB Type-C Mobile Phone Quick Charge…

Downloads
145
Likes
21
Rating
5
P
Printablesmgx

Lathe QCTP Dual Holder

I like the idea of holding the QCTP tools on the lathe itself, but I wanted something to make better use of space and to fit my 0xA tool holders. With this design you can seat the tool holders on both sides of the lathe back plate. That…

Downloads
143
Likes
25
Rating
4
P
PrintablesMytnmtz

Husqvarna QC80 Ladegerät Halterung / Husqvarna QC80 Mount

Es gibt 2 Versionen: mit seitlicher Halterung und ohne seitliche Halterung. Aufrecht stehend drucken. Printer: Ender 3 /Prusa Mks3+ Nozzle: 0.4 Layer: 0.3 /0.2 No Support skirt

Downloads
142
Likes
12
Rating
4.75
P
Printableskaje

Lathe QCTP Tool Holder Rack - OXA size

This is one of three versions : AXA size OXA size (this one!) A2Z size This is a re-mix of this print : https://www.thingiverse.com/thing:4545509 Related video here : https://youtu.be/2Odj_uWx0Xs I recreated the original in my own CAD…

Downloads
137
Likes
15
Rating
1
P
PrintablesKF0ARE

QRP-Labs QCX/QMX 6mm Low Profile Knobs

I wanted a slicker tuning knob for my new QMX radio. The conventional set screw 6mm knobs it came with were fine but I wanted something I could use to tune around by pushing with the tip of my finger rather than grabbing and turning. I…

Downloads
137
Likes
25
Rating
5

USB-C PD to USB-A QC 2/3

This is a small housing for two cheap boards: USB-C PD to 20V converter DC 6-32V to USB-A QC 2/3 converter (38mm x 19mm) Both modules can be soldered together with a small flexible wire and then glued into the housing using 1mm thick…

Downloads
134
Likes
16
Rating
0
P
PrintablesRed Haniwa

Case for CTP01 QC3 USB charger PCB

Case for CTP01 QC3 board (9v 2a 18w max). I designed this case with some space at the back so you can tie a knot to act as strain relief. The weird design of the lid is because I want it to push the board and keep it in place inside the…

Downloads
133
Likes
9
Rating
5
P
Printablesgyrex

Ozito PXC 20V 100W USB-PD & USB-A (QC 3.0) Charger

I designed this 100W USB-PD/A (QC 3.0) charging box which plugs into an Ozito 20V battery. This is ideal as it completely charges up my Macbook and other USB-PD laptops at a full 100W. You can either print the top with USB-PD only or a…

Downloads
127
Likes
30
Rating
4.5
P
PrintablesLudo

Bose QC25 Liner

A new Liner for the QC25 when the old one break. No glue needed. Perfectly fit and won't move.

Downloads
125
Likes
19
Rating
4.8
P
PrintablesAngus L

Headphone holder ( Bose QC35 )

very easy to print heaphone holder, ideal to be stick with command strips size M. the most perfect fist layer for this is given by an ultrabase / glass printbed for the command strip to stick perfectly due to the shinny finish of the…

Downloads
125
Likes
18
Rating
5
P
PrintablesNerdPorter

Bose QC35 Headphones holder - vertical mount

There are several models available for the QC35 headphones, but none that I saw have a vertical mount that I could use - so I made one. Maybe you can use it too. Does not need support, the bottom cutouts are at 45°. Shouldn't need a lot…

Downloads
125
Likes
15
Rating
5
P
PrintablesEugeneGTI

case for 6-35V DC to USB Type C PD 3.0 QC4

This case is for great module that converts 5-35v voltage to USB C PD and QC protocols. Using this module https://amzn.to/3ANPPpH I am able to charge Thinkpad laptops, galaxy phones and lesser electronics, from my 3s and 4s packs. I was…

Downloads
123
Likes
9
Rating
0
P
Printableskaje

Lathe QCTP Tool Holder Rack - AXA size

This is one of three versions : AXA size (this one!) OXA size A2Z size This is a re-mix of this print : https://www.thingiverse.com/thing:4545509 Related video here : https://youtu.be/2Odj_uWx0Xs I recreated the original in my own CAD…

Downloads
117
Likes
14
Rating
0
P
Printablesprintom

Einhell Power X Change USB-QC-Loader

Ich habe das angegebene Modell von “Hans” etwas modifiziert, indem ich es in drei Bauteile aufgeteilt habe. Durch diesen modularen Aufbau ist eine einfache Anpassung des mittleren Bauteils an weitere Verwendungszwecke (z.B. andere…

Downloads
114
Likes
27
Rating
5
P
PrintablesLiztom

QCY T13 pokeball case

There two diferrent versions. One model has an option to print a TPU cover for the earphone, to protect of scratchs, and can be used as a portable case.

Downloads
113
Likes
13
Rating
5
P
PrintablesMig86

Hex Flow Headphone Stand - Bose QC45

Simple but stylish stand to store your headphones on a desk or night stand. Designed for the Bose QC45, will likely fit other similar over-ear headphones. Printed on Bambu X1C. 0.08 Layer height. PLA Basic. Tree supports.

Downloads
110
Likes
16
Rating
0
P
PrintablesAtrium Temporis

Cqc Knife

Cqc Knife From Metal Gear Solid 3: Snake Eater. Recommended Material: Anything Rigid. I would recommend adding some supports to make sure the print doesn't mess up.

Downloads
109
Likes
8
Rating
0
P
PrintablesFrank

USB C PD/QC decoy board case

This is a case for a board that negotiates for a preset voltage from a usb c power supply. It requires shrink tube or glue to be closed. The board used it in the link below:…

Downloads
96
Likes
18
Rating
4
P
PrintablesDominik Pechac

DIY Powerbank 18650/26650 QC4.0 100W

A case for a power bank control board that fits 25x 18650 or x 26650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast…

Downloads
95
Likes
24
Rating
0
P
PrintablesLesley's Lab

Bose QC25 liner replacement

The liner on my Bose QC25 failed, so I decided to make a replacement. You will need to glue it with to the headphones over-night. I used multi-purpose glue to stick it, you could also use super-glue, but I would be careful cause…

Downloads
93
Likes
14
Rating
0
P
Printableskenny93

Signalkegel / Lightcone für LEDLENSER P7R / P7QC

Eignet sich super, um komplette Räume nur mit Taschenlampen auszuleuchten. Gedruckt aus PETG. ABS/ASA funktioniert auch. PLA ist bestimmt möglich, habe ich aber nicht ausprobiert. Material auf den Fotos ist PETG Signalweiß von M4P.…

Downloads
90
Likes
7
Rating
5
P

Maginon Quadcopter Drone QC-710SE Motor Cover

You can print this model if you own a Maginon QC-710SE WiFi and need a replacement motor cover for your drone. I suggest using any clear filament so that the printed part won't block the LEDs from the drone. Do you like my models?…

Downloads
88
Likes
14
Rating
5
P
Printables3DSistem

QCX Mini case

Simple enclosure with angle brackets for this fantastic qrp transceiver. Donations for new trx are more than welcome via paypal

Downloads
84
Likes
8
Rating
0
P
PrintablesHeatbreak

USB PD / QC Trigger box - For CTP10 board - XT60 output

For the CTP10 board which can request various voltages from USB chargers supporting: PD - Power delivery QC - Quick charge FCP - Fast charge protocol AFC - Adaptive fast charge Sorry about how the lid attaches (glue). I doubt I will ever…

Downloads
83
Likes
17
Rating
0

Makita 5s PD QC 100W Power Bank Battery Adapter

Adaptation of a power bank PCB from Aliexpress with all major qc protocols and cell balancing. Holes are almost necessary. Heat output is around 10w in the worst case scenario. PETG or ABS/PC recommended. PCB reaches up to 70°C. Screws…

Downloads
81
Likes
16
Rating
0
P
PrintablesD_Y

USB quick charge trigger case LX-QC01 / simple QC 2.0/3.0 trigger enclosure

Case for simple USB Quick Charge 2.0/3.0 trigger with fixed voltage value 5, 9, 12 or 20V which you can buy on Aliexpress: https://bit.ly/3zeeSCY I've made some variants for top cover with 5, 9, 12 or 20V text on it, and also one without…

Downloads
80
Likes
10
Rating
0
P
Printablescohenco

Bose QC 35 II Case

Just slice it and it's ready. As it's a quick print, use 40% infill to add some more strength to it. The case only acts to prevent the edges of the headphones from getting scratched on surfaces. Most likely you will need some glue to…

Downloads
80
Likes
11
Rating
5
P
PrintablesRed Haniwa

QC 3.0 24w module panel mount (Single and Double)

2025/12/08 update: Increased tolerance by 0.2mm so the board can be installed easier without having to use force. ===== This is the panel mount designed for AJ27-TIE 24w QC 3.0 USB module. They have a variant with 2 ports side by side,…

Downloads
79
Likes
12
Rating
0
P
PrintablesIgor

Small Powerbank 21700 (1-2 cells) 18W PD QC

Powerbank with 1/2 21700 cells and SW6106 board. You'll need: 21700 cell (2x for 2P model) capable of at least 4A charging and discharging (pretty much any, but 5Ah are preferred of course). 18650 should also work, though does not make…

Downloads
79
Likes
20
Rating
5
P
PrintablesLegacy_Micro

BASIC MODEL HW-298 USB QC 3 MODULE

BASIC MODEL HW-298 USB QC 3 MODULE

Downloads
79
Likes
5
Rating
0
P
Printablesoutcastrc

QCTP - 100 series tool holder bracket

I loved how TNDaves tool holder worked so I redrew it to fit a Grizzly G0602 and to hold series 100 tools. Print instructions Licence: Creative Commons - Attribution Category: Tool Holders & Boxes Print Settings Printer Brand: Prusa…

Downloads
73
Likes
8
Rating
0
P
PrintablesReProps

CQC-9 Defoliation Tool(HELLDIVERS 2)

split for printing, takes some 1/4 and 1/2 in rods. aprox 44 inches long. RIP AND TEAR HELLDIVERS Category: Props

Downloads
72
Likes
39
Rating
0
P

Bose QC 35 Liner

The rubbery liner started fracturing after some years. I based this liner on https://www.printables.com/model/25945. This was a perfect fit using PETG on my Ender 3 V2 Printer.

Downloads
71
Likes
7
Rating
0
P
Printableskaje

Lathe QCTP Tool Holder Rack - AXA size - Version 2

This is a remix of an earlier version that I printed and used successfully - in fact I am still using some of those earlier prints. However, I found a couple of things about the earlier print that I thought might be improved. First, the…

Downloads
69
Likes
7
Rating
0
P
Printablesarmacisaac

AXA QCTP Tool Mount for 1" T-Slot Extrusion

Mount for AXA sized Aloris type quick change lathe tool holders. Mounts directly to 1" T-slot rail using standard 1/4"-20 x 1/2" button head cap screw and t-nut. Printed with support but would likely print fine without. 1" T-slot…

Downloads
69
Likes
12
Rating
5
P
Printablesqczek

QCZEK LRS JR box

This is enclosure for LRS i developed. Finf out more on project site. http://qczek.beyondrc.com/qczek-lrs-433mhz-1w-lora-rc-link/ Category: R/C Vehicles

Downloads
69
Likes
3
Rating
0
P
PrintablesBen Alexander

QRPLabs QMX/QCX-Mini Cover

A minimalist, press-fit cover for the popular QMX/QCX-Mini QRP transceivers produced by QRPLabs. Installs over the front of the radio to protect the screen, buttons, and knobs. When using the transceiver, the cover can be installed on the…

Downloads
66
Likes
5
Rating
0

V1284 22.5W PD QC AliExpress Powerbank Enclosure

Enclosure for V1284 22.5W PD QC AliExpress Powerbank Controller and 126011 battery bank. Requires superglue for assembly. Light guide should be printed with translucent filament.

Downloads
66
Likes
5
Rating
0
P
PrintablesDirkHoefle

Ryobi mobile Lab Powersupply with QC 3.0 Charger

This Ryobi mobile lab power supply is based on the work of Adrian Akison his Battery Holder for Ryobi 18V battery https://www.thingiverse.com/thing:1234683 forms the top and the bottom part of the case. To complete this build, you need…

Downloads
66
Likes
36
Rating
5
P
PrintablesRed Haniwa

Remixed QC 4x USB board enclosure

The original was nicely designed, but I didn't like how the screws head protrude out of the case so I've made this very simple remix: Enlarge main body's holes so you can use M3 screw directly (original design had the holes too small I…

Downloads
65
Likes
11
Rating
0
P
PrintablesOndraM

Bose QC35 Headphones holder (without holes)

Printed without supports with 15 % infill 0.2mm layer PLA Unlike the original model, it does not contain holes for screws (I attached it with double sided tape)

Downloads
64
Likes
6
Rating
5
P
Printablesjazzu

USB-C Triger PD/QC

USB-C Fast Charge Trigger Board Module PD/QC Decoy Board Fast Charge USB Type-c High Speed Charger Power Delivery Boost

Downloads
63
Likes
5
Rating
5
P
PrintablesOesie

Gridfinity QCY MeloBuds Pro earbuds case holder

About This gridfinity holder is designed for the earbuds case of the QCY MeloBuds Pro. Print instructions Based on one print run: PLA, 0.2 mm, no support.

Downloads
63
Likes
1
Rating
0
P
Printablesmikeller

Dust Caps for Swagelok QC6 Male Quick Disconnects

Dust protection caps for the Swagelok QC6 male quick disconnect, often used as high flow gas connection on rebreathers. Print in TPU to get the flexibility required to get it on and off. Update (8 Jan 2024): Added a vented model (for…

Downloads
63
Likes
2
Rating
0
P
PrintablesOleksandr

QC4.0 QC3.0 USB Type-C

QC4.0 QC3.0 USB Type-C Mobile Phone Quick Charge Adapter 6 -35V Step Down Buck Boost Module for Huawe SCP/FCP

Downloads
62
Likes
13
Rating
0
P
Printablesunderdog1097

Wall Mount for Husqvarna QC80 Charger

Wall Mount Husqvarna QC80 Charger

Downloads
58
Likes
9
Rating
0
P
Printablesfirepower

Makita Battery 5V USB QC3 LED Spot Light XT60 DC

Add on Accessory for Makita Tool Battery (18V to 21V) with 4 switched outputs. 4 USB QC3, Apple, Samsung etc Fast Charger. 6W LED low power Emergency Light. (truck/trailer side light 12 to 24V) 48W LED high power Spot Light. (auto spot…

Downloads
54
Likes
11
Rating
0
P
PrintablesKYFriedHam

QCX Mini/ QMX Knobs

Summary This Thing is a set of knobs intended to replace the knobs that come with the QCX Mini. The set includes a plain scalloped knob for volume control and a knob with a finger well to use as the VFO knob. These knobs friction fit on…

Downloads
53
Likes
12
Rating
5
P
PrintablesSpiritofwinter

Bose QC Earbuds Holder

Made a simple holder for my Bose QuietComfort Earbuds in a project to organize some of the things I have around my office. Printed with PLA, 0% infill, 0 solid bottom layers. No raft or brim needed on my FlashForge.

Downloads
52
Likes
1
Rating
0

CTP2 (QC4.0 QC3.0, DC-DC , USB Type-C adapter)

Mounting case for CTP2 with M3 holes.

Downloads
52
Likes
3
Rating
0
P
PrintablesZXAtari

Philips QC5380 hair trimmer

Replaces broken trimmer part for Philips QC5380 (and maybe other models). Side joints may be melted with flat nail head to fix permanently. Some curves removed to lay flat and simplify printing. Updated version v2 Calibrated hair…

Downloads
49
Likes
8
Rating
4
P
PrintablesSkyNT

Modular Angled 0XA QCTP Tool Holder for Vevor Mini Lathe

To complement my mini lathe hand tool holder for the Vevor mini lathe, I have made some QCTP holders to go along side. I was inspired by https://www.printables.com/model/604708-axa-qctp-tool-holder-rack and a few other models to hang the…

Downloads
48
Likes
5
Rating
0
P
Printablesmrottlaender

Bose QC45 Attachment

This is a Attachment for the Bose QC45 headphones. It is designed to snap into the small gap, surrounding the top of the headphones. To achive a resin-print-like surface, I sanded the visible part of the attachment. This also minimizes…

Downloads
48
Likes
3
Rating
0
P
PrintablesBummer Bummer

Quick-change toolholder, AXA QCTP 250-111 250-101 for WM210.

Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…

Downloads
46
Likes
8
Rating
0
P
PrintablesAnthony Walley

QCX Mini combined battery holder, stand and protector V2

Holds your QCX Mini, provides power, and you can turn the radio over to protect the screen and knobs during transport. At your own risk: Populate the battery holder/lid with 3x 18650 cells, and there is space to safely mount a battery…

Downloads
46
Likes
16
Rating
0
P
Printables3DSistem

QCX Case

My version of case, for this fantastic little portable transceiver. Built-in foldable stand, 2 parts deisgne, no glue needed. When assembling drop in control buttons, then insert VFO button in top part opening, press fit PCB, after that…

Downloads
46
Likes
1
Rating
0
P
PrintablesRsX

Lathe Dremel holder for QCTP OXA

something Category: Machine Tools

Downloads
46
Likes
5
Rating
0
P
PrintablesJoerg Ehrhardt

QCTP ( 250-00X) Proxxon holder

250-00X Proxxon holder. I use the holder to shorten my arrow shafts with the Proxxon. To clamp the Proxxon you need 1x M8x40 1 X Nut M8 To adjust the height you need an M6x35 grub screw (or simply saw off the head of a normal screw. To…

Downloads
46
Likes
4
Rating
0
P
PrintablesToFe

Small lathe improvements: Modular magnetic QCTP tool holder for mini lathe

My modular tool holder for QCPT (cheap chinese aluminium version - like this https://www.aliexpress.com/item/32891663898.html ) When buying the aditional holders, I found that there are probably two versions with different angles (Your…

Downloads
46
Likes
16
Rating
0
P
PrintablesMarkintime

QCTP Dial Indicator Holder

This allows an easy way to center things on a lathe using a quick change tool post (QCTP). This is sized for the more common dial indicators in the us with a 3/8 inch stem and is held in place with a number 6 thumb screw. The height screw…

Downloads
45
Likes
1
Rating
0
P
PrintablesCameron Gray

Lenovo ThinkStation P340 Wavlink AQC113 NIC Bracket

A bracket for installing a Wavlink AQC113 PCIe NIC in a Lenovo ThinkStation P340 Tiny PC. This is likely also compatible with other models of Lenovo Tiny PC that use the same PCIe backplate, e.g. ThinkCentre M90q.

Downloads
43
Likes
11
Rating
0
P
PrintablesTheParrotGuy

Powerful QC3.0 powerbank with protected connectors

A big-capacity power bank with a special design to protect the USB connectors when carried in a bag or pocket. Powerful enough to use as a power source for a TS80 soldering iron. With info for the electronics module and build…

Downloads
43
Likes
10
Rating
0
P
PrintablesReProps

CQC-30 Stun Baton HELLDIVERS 2

TAKES A 1/4 IN ROD FOR SUPPORT. Category: Props

Downloads
42
Likes
15
Rating
0
P
PrintablesBobert47

Quick Charge (QC) USB Board Mount Box

This is a remix of the following two models...for some reason Thingiverse is not letting me link them under "Resource Source Files" https://www.thingiverse.com/thing:3593374 by steffen_h https://www.thingiverse.com/thing:2553093 by…

Downloads
42
Likes
3
Rating
0
P
PrintablesTaiko

USB C PD/QC decoy board

Improved USB C PD/QC decoy board by Frank.

Downloads
42
Likes
2
Rating
0
P
PrintablesCurtis Soda

Philips QC5055 clipper cap

Clipper for philips qc5055 haircutter

Downloads
40
Likes
2
Rating
0
P
Printablesmeatkvass

PD/QC/AFC Decoy Trigger module enclosure

Enclosure for popular type-c decoy trigger module (5V 9V 12V 15V 20V). Assembly requires standard computer case fan screws. Print Settings Printer Brand: VoronDesign Printer: Voron 0 **Rafts:** No Supports: No **Resolution:** 0.2mm…

Downloads
40
Likes
6
Rating
0