Search results: r400

Sort order

32 models

P
Printablesboops7442

120mm Fan Wall Mounts for Rosewill RSV-R4000U 4U Server Chassis

Wall mounts and connectors for 120mm fans to connect together and make a wall of 360mm fans to help the Rosewill RSV-R4000U case have the adequate airflow it needs. Wall mounts just screw into the side of the case using a couple of the…

Downloads
412
Likes
80
Rating
5
P
Printablesbroodro0ster

HomeWizard Sensus 620 adapter (R400/R315)

Print the adapter and use the 2 smallest enclosed screws from the HomeWizard watermeter to mount it. You have some room to align it well. I found it the easiest to let some water run so the meter is spinning. Then it's quite easy to align…

Downloads
284
Likes
16
Rating
5
P
PrintablesPeter H

Ryobi Guide Bushing Base Plate RTR400trim routers.

This base was designed for to replace the standard square plastic base found on many generic trim routers, and in the case, specifically the Ryobi RTR400S and RTR300 and generic trim routers. It will allow the fitting of a range of common…

Downloads
212
Likes
25
Rating
0
P
Printablesnbasse

Logitech R400 Holder

A wallholder for Logitech Wireless Presenter R400. Might also fit R700 Category: Computer

Downloads
211
Likes
9
Rating
4
P
PrintablesExitaph

FLASHPOINT RF-400/GODOX AR400 90 DEGREE MAGNETIC POLARIZING FILM MOUNT

This is a snap-on magnetic mount for attaching polarizing film to Flashpoint RF-400/Godox AR400 for photogrammetry purposes. It uses 4 magnets 90 degrees apart so that you can easily alternate between polarized and nonpolarized in order…

Downloads
170
Likes
11
Rating
0
P
PrintablesSnowstorm

Water sensor for the R400 Sensus 620 adapter. Installation without drilling.

This is made by the R400 Sensus 620 Water meters. There are already 2 mounting recesses on the glass, these are used to place the holder over it and to place the sensor perpendicular to the metal. You can attach the adapter using the push…

Downloads
134
Likes
8
Rating
5
P
Printablesalannah

Adapter Plate for Ryobi RTR400-S Trim Router

This is the base plate that comes with a Ryobi RTR400-S 400W Trim Router. Print this either as a replacement for an existing one (STL) or to use to build upon for various jigs and attachments (STEP).

Downloads
86
Likes
14
Rating
0
P
PrintablesWernerIsDed

"TurboAirfilter4000" HEPA filter

A Air Filter for a "Attwood Turbo 4000" 100mm fan. The fan is rated for 390 m³/h air throughput. The filter consists of a HEPA and a Carbon filter stage. The 'grid panel' should be printed without top or bottom layers. You will need: 4x…

Downloads
70
Likes
19
Rating
5
P
PrintablesSanzhar Axani

TP-LINK Archer VR400 v3 wall-mount

I have changed my router from Keenetic back to TP-LINK Archer VR 400 version 3 since the new one is more stable and supports 2.4G and 5G split… And there was a necessity to design a new wall-mount. I printed the model on Bambu with PETG…

Downloads
52
Likes
0
Rating
0
P
Printablesvandenmar

LMR400 coax cable prepper for PL259 crimp connectors

Uses 3 standard utility knife blades. Needs 2x M3x20 and 1x M3x25 screws and nuts. Stack the parts in order: a_cover, a, b, c, c_cover. Should be pretty straight forward. Cut the coax, push it in all the way, clamp down, and spin the…

Downloads
47
Likes
10
Rating
5
P
PrintablesDirty Bassett

RIKO ar400 polarizer

Polarizer ring for photogrammetry. Plexiglass used was 3mm and the magnets were 5x2 mm. Video of assembly avaliable at https://www.youtube.com/watch?v=c8eMhpucD88&ab_channel=TheDirtyBassett Category: Camera

Downloads
33
Likes
1
Rating
0
P
PrintablesPlasticyBits

Honda XR400 Instrument Bracket

Fixing up an old Honda XR400 for a friend and I found the instrument panel was loose as the mounts had broken off the rear. This seems to be a common problem and this plate needs tp ne glued and screwed to the back, use M8 bolts to hold…

Downloads
24
Likes
1
Rating
0
P
Printablessehmee

12mm version - Water sensor for the R400 Sensus 620 adapter. Installation without drilling.

I recreated the model from Snowstorm to fit it my 12mm sensor, I re-used the buttons.

Downloads
23
Likes
2
Rating
0
P
PrintablesSidiox

Logitech R400 Presenter Holder with Ziptie Tiedown Mount

Prints without issue at 0.2mm layer heights without supports on Prusa MK4 with input shaping.

Downloads
20
Likes
1
Rating
0
P
Printablesmhwlng

19 inch rack anti-sag bracket for QNAP TL-R400S

19 inch rack anti-sag bracket for QNAP TL-R400S Print the bracket on the side. You need two brackets, one of them mirrored in the y-axis in the slicer. No support material needed. Included is the f3d file

Downloads
20
Likes
5
Rating
0
P
PrintablesKB2QQM

LMR400 Coax Clip Long

This LMR400 10mm diameter coax clip is 25.4mm high by 63.5mm long. It allows someone to attach 1 circular piece of coax together with the main loop of a Magnetic Loop Antenna to lower the frequency of the loop. It's just a way to clamp…

Downloads
17
Likes
2
Rating
0
P
PrintablesKim

Spacer for Shimano Pedal PD-GR400

Shimano Pedal PD-GR400 spikes are quite long. This is 3mm spacer that lower the spikes if you want...

Downloads
16
Likes
0
Rating
0
P
Printablesmbogh

QNAP TL-R400S Anti Sag Bracket

Mounting the QNAP TL-R400S and other shallow depth equipment from QNAP with the provided rack ears leaves the device sagging, previously I used a tower of bricks to hold it up right but no more! The generic bracket made by Thingiverse…

Downloads
14
Likes
1
Rating
0
P
Printablesalannah

Ryobi RTR400-S Template for Drawer Handles

Remodelled the Makita base plate provided by Alexandre Chappel to suit a Ryobi RTR400-S trim router. Incorporates my base Adapter Plate for Ryobi RTR400-S Trim Router Original model can be found at his website here . His original YouTube…

Downloads
14
Likes
2
Rating
0
P
PrintablesLuisFer

Switch Logitech R400 Laser Presentation Remote

Print at 0.1mm layer, 100% infill. Rotate 180 degrees, like a pyramid. No supports needed. Imprimir a 0,1mm de capa, 100% de relleno. Girar 180 grados, como una pirámide. No necesita soportes.

Downloads
12
Likes
1
Rating
0
P
PrintablesKB2QQM

LMR400 Coax Holder for Transmitting Loop 36.5mm Length

This is for LMR400 or any Coax line that is 10mm diameter. This cable clip holds one loop of coax about 35mm (1.5 inches) from another loop of coax. It is for a Transmitting Loop Antenna, to add another full loop to lower the frequency of…

Downloads
12
Likes
1
Rating
0
P
PrintablesALX-24

GPU Airflow Duct For Cooler Master NR400/NR400ODD

My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…

Downloads
10
Likes
2
Rating
0
P
PrintablesMasterMotoff

XR400 muffler mount for TTR250

I made a template to mount an XR400 muffler to a TTR250.

Downloads
10
Likes
2
Rating
0
P
Printablesvmachinist

Rotello QK-R400 Junction Box Cover

Design Measured off the OEM junction box cover to your left. Next a painstaking exercise in OpenSCAD scripting. The previous installer didn't realize that the covers are mirrored, so they cut cable holes in both covers exactly the same. 🤦…

Downloads
7
Likes
2
Rating
0
P
Printableszacharow.makes

Knob for Manfrotto 400 Head R400.18

After my tripod fell over, I needed to replace both knobs . Instead of buying the full Tilt/Pan Control Crank , I designed this replacement knob . The original knob is round, but I made this version easier to print Requires a 4 mm drill…

Downloads
6
Likes
0
Rating
0
P
Printablesbokiko io

Open-Frame Case for KAMRUI / NiPoGi / ACEMAGIC AM06 Pro Mini PC (HCAR4000-MI / HCAR5000-MI board) — 120 mm Fan Lid

I wanted the AM06 Pro out of its plastic box and under a proper 120 mm fan, with every port reachable and nothing cut off the stock cooler. This is a from-scratch open-frame tray, inspired by Th3Rom3’s AK2 Plus case (…

Downloads
6
Likes
0
Rating
0
P
PrintablesNpalmJesc

Shimano SL-R400 Flat adapter

Heyyyyyy I know it’s a part you can buy, but they don’t ship to my country, so I decided to make it myself using the rounded tube version as a reference. I printed it in PLA and it’s worked fine so far, but I’d recommend using a…

Downloads
2
Likes
1
Rating
0
P
Printableszacharow.makes

Manfrotto R400 locking pin

Manfrotto R400 locking pin - we lost one lock when it "jumped" out while replacing articulating knob. Print in PETG for better flex than PLA.

Downloads
1
Likes
1
Rating
0
P
Printableszacharow.makes

Manfrotto R400 replacement knob

Manfrotto R400 replacement knob. My students broke articulated knob and wanted to make more rigid one (in 3rd picture there is one in the out of focus). Print in PETG, original screw fits great.

Downloads
0
Likes
1
Rating
0
P
Printables

GPU Airflow Duct For Cooler Master NR400/NR400ODD

My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…

P
Printables

12mm version - Water sensor for the R400 Sensus 620 adapter. Installation without drilling.

I recreated the model from Snowstorm to fit it my 12mm sensor, I re-used the buttons.