Search results: racer

Sort order

657 models

P
PrintablesWhitespace

FPV-Wing-Racer (rev.2)

Print. Fly. Crash. Repeat. Round 2! ----------------------- After the initial version has been out for some time now. It's time for some improvements, thanks to some feedback from the community I got rid of the click-in system and…

Downloads
4,740
Likes
3,719
Rating
4.91
P
PrintablesPolly-Jeanius

Hotrod Racer Balloon Car

Remix of ‘Hot Rod Balloon Rocket Car’ by VF: https://www.printables.com/model/229851-hot-rod-balloon-rocket-car VF’s original hotrod design is really cool, I’ve just simplified the air exhaust channel and added an easy-blow mouthpiece to…

Downloads
4,427
Likes
770
Rating
4.74
P
PrintablesP-atix

Vespa Cafe Racer

Model Vespa 150 Super (1965) It's not exactly scale model but is optimised for easy print with no supports. It is better to glue the pins, but it is not necessary. Printer setup: Nozzle diameter 0,4 Layer height 0.20mm 10-20% infill No…

Downloads
1,611
Likes
247
Rating
5
P
Printablesprintndrive

DIY RC GoCart - TableRacer

Yet another smaller model; this time a GoCart! I've made a larger one in the past but decided I wanted to make a smaller one for indoors. Thus the TableRacer was born! The TableRacer utilizes standard N20 motors and the standard 9g servo…

Downloads
1,436
Likes
469
Rating
4.89
P
PrintablesSTLLabs

2024 Mini Racer

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 2024 MINI RACER is a mini version of our 2024 racecar. SIZE / WEIGHT: Total assembly: Roughly 90 x 40 mm Filament: We used roughly 12 g of filament using 5% infill.…

Downloads
1,386
Likes
151
Rating
4.62
P
PrintablesAzumetrics

Cosplay Arm Bracer v1 (Djeeta Granblue Fantasy)

A cosplay armor/arm bracer in 2 parts. Need to be scaled to whatever size your arm is. This was the size that fit my slightly bigger arms. Also might be in an extremely tiny or large scale, might have to scale it up by 10000% or…

Downloads
1,207
Likes
522
Rating
0
P
PrintablesByte Insight

Bezeller - Bezel Free Mounts for Sim Racers

If you have a triple screen set up on your Sim Racing rig and want to lose the black strip that occurs where your screens meet then this is the basis of a DIY Bezel-Free Kit. The original ASUS ROG Bezel-Free Kit was an accessory that…

Downloads
1,128
Likes
60
Rating
5

FLSUN SUPER RACER SR - Double fan duct

Improved fan duct flsun super racer (the probe can fit)

Downloads
1,110
Likes
71
Rating
4.9
P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Downloads
1,092
Likes
98
Rating
3.67
P
PrintablesDokrull

Acetech / Xortech Airsoft Tracer Housing

This is a replica of a real steel suppressor, that could house the Acetech or Xortech Mini Airsoft-Tracerunit. There is a long an short version with a crown or flat end. Keep in mind, the crown version is better to be printed on a resin…

Downloads
990
Likes
114
Rating
5
P
PrintablesSTLLabs

2026 Mini Racer

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 2026 MINI RACER is a mini version of our 2026 concept racecar. SIZE / WEIGHT: Total assembly: Roughly 95 x 35 mm Filament: We used roughly 12 g of filament using 5% infill.…

Downloads
959
Likes
112
Rating
4.5
P
PrintablesSTLLabs

1988 Mini Racer

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 1988 MINI RACER is a mini version of our older 1988 racecar. SIZE / WEIGHT: Total assembly: Roughly 70 x 45 mm Filament: We used roughly 10 g of filament using 5% infill.…

Downloads
865
Likes
111
Rating
5
P
PrintablesFanofgenetics

Hotrod Racer Balloon Car - No Glue version

The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…

Downloads
857
Likes
80
Rating
5
P
PrintablesKaminoKGY

Flsun Super Racer SR Feets

Flsun Super Racer SR Feets for more stability 🦾 The model is at the exact same height as the original feets but you can increase or decrease the height easily in you slicer. Printed in TPU 82A and used in this video: Remixed from:…

Downloads
830
Likes
62
Rating
4.33
P
PrintablesKampflafer

Airsoft Tracer Housing

I did not like the look of commercial available Tracers so i designed my own. Housing for the Begadi Tracer Unit (00821110SET). 14 mm CCW Thread. For the best fit and look print with Resin, FDM works as well. If you need other mounting…

Downloads
815
Likes
154
Rating
4
P
PrintablesPeter Farell

Cafe Racer

Cafe Racer. Fixed for printing.

Downloads
687
Likes
118
Rating
5
P
PrintablesBoyairek

AAP01 Frontend Hammerhead with tracer unit

Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…

Downloads
685
Likes
101
Rating
5
P
PrintablesAAME

PiXeL - Micro fpv drone racer frame - tiny whoop pusher style

I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…

Downloads
611
Likes
117
Rating
5
P
PrintablesZCraftworks

Legendary Fantasy Costume Bracer

This is a costume bracer for a fantasy outfit -- it looks particularly great with a green tunic and cap. Happy adventuring! Sanded and spray-painted brown for a leather-like appearance. I also used diluted black paint for a…

Downloads
593
Likes
322
Rating
5
P
PrintablesPetra & Jana

Bunny Racer

Glue all together and use regular stick for the wheels. For carrot use brim.

Downloads
559
Likes
230
Rating
4.85
P
Printablesmaramao

TBS Tracer Crossfire MPM Micro to Nano - JR bay module adapter

Made a quick remix of the already discontinued betafpv Micro-Nano module adapter (they probably realized they can make more money making a ELRS Micro module) to be used with TBS nano style transmitter modules and hopefully other nano…

Downloads
557
Likes
13
Rating
5

FLSUN SUPER RACER SR - almost radial fan duct

Hello, Fan duct for flsun super racer no supports!,

Downloads
540
Likes
40
Rating
4.5
P
PrintablesGuilouz

FLSUN Super Racer FYSETC Portable Input Shaper Mount

FLSUN Super Racer FYSETC Portable Input Shaper Mount. Needed: 2x M3x10mm Screws to fix Portable Input Shaper to the mount 1x M3x10mm Screw to fix support on Super Racer 1x M3 Nut to fix support on Super Racer Configuration for Klipper:…

Downloads
490
Likes
39
Rating
5
P
PrintablesBlownUpp

ADXL345 mount for FLsun Super Racer

I wanted a secure way to mount the sensor with stock hardware, sine the other mounts for the Super Racer were just integrated or dependent upon custom effectors and hot ends. I also didn't want to make any permanent changes to the…

Downloads
486
Likes
38
Rating
5
P
PrintablesJeevan

Tracer 9 GT Chain Slack Jig

This jig will help you with adjusting chain slack, normally you would need to adjust and check the slack, but with this jig, you just place it on the chain guide and adjust the slack until it touches the jig. Factory spec is between 45mm…

Downloads
476
Likes
20
Rating
4.5
P
PrintablesGadmek

Mach 5 (car from Speed Racer)

This is a model of Speeds car the Mach 5. I printed a smaller version of this with the example chain on the back to make a keychain. a few notes: *The biggest issue I had with the small version was the steering wheel(since I printed it to…

Downloads
472
Likes
38
Rating
0
P
PrintablesGuilouz

FLSUN Super Racer Cable Tidy

Cable Tidy for FLSUN Super Racer. Just requires 2 cable ties to fix the two parts together.

Downloads
435
Likes
55
Rating
5
P
PrintablesKaminoKGY

Flsun Super Racer SR Fanduct Spacers

Flsun Super Racer SR Feets for more stability 🦾 The model is 3 mm high but you can increase or decrease the height easily in you slicer. Used in this video:

Downloads
434
Likes
29
Rating
4.5
P
PrintablesHow2Texan

Top Fuel RC Drag Racer RMRRF

First and foremost, these designs are not my own. I am uploading them with permission from the creator, Scott from The Edge of 3D , and under the same license. He designed and tested this car in just a few months for the very first Rock…

Downloads
410
Likes
100
Rating
5
P
PrintablesMNA24

RC Car Wall Mount Compatible with FTX Tracer (Also HBX 16889)

Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…

Downloads
399
Likes
45
Rating
4.67
P
PrintablesGamiii

Bed level test for FLSUN Super Racer (SR)

Bed Level für FLSUN SR (Durchmesser 280 mm) Zu beachten gilt, dass die Datei fast das volle Druckbett verwendet! Bed Level for FLSUN SR (diameter 280 mm) It should be noted that the file uses almost the full print bed!

Downloads
370
Likes
11
Rating
5
P
PrintablesJosé Pedro

Porsche 919 Hybrid - Le Mans Prototype Racer Model

Experience the cutting edge of motorsport technology with this 3D printable STL model of the Porsche 919 Hybrid. This Le Mans prototype racer model is perfect for motorsport enthusiasts and fans of endurance racing, showcasing innovative…

Downloads
367
Likes
57
Rating
5
P
PrintablesRob

V-Slot Racer - Recycle Your Old Printer Parts!

I designed this for the Toy Cars Competition. Having recently replaced my very slightly worn V-Slot wheels on my 3d printer I'd been looking for a use for the old ones. The car is a simple easy print. 20% Infill and 0.2 mm layers is fine.…

Downloads
365
Likes
305
Rating
5
P
PrintablesRyanMaverick

FLSun SR Super Racer - EFFECTOR Hotend Assembly

****************** *** ITALIANO *** ****************** Ho scelto la Super Racer per la sua struttura e per le sue potenzialità nello stampare filamenti semplici a grande velocità, come PLA e PET-G. Appurato che l'Hotend di fabbrica non è…

Downloads
364
Likes
49
Rating
5
P
Printablesinkognita

FLSUN SR Super Racer pillar cover

I saw there was a model for the FLSUN V400. This is for the “legendary” FLSUN Super Racer.

Downloads
358
Likes
36
Rating
5
P
PrintablesGamiii

Bed level test for FLSUN Super Racer (SR) V2

Essential elements are tested without it being a huge circle.

Downloads
352
Likes
16
Rating
0
P
PrintablesSamarth Jain

Tracer Pulse Pistol Gun | Overwatch

Model of Tracer's weapon Pulse Pistol from the popular esports game Overwatch. I have divided the model into 4 parts for easy printing - Handle left and right, and muzzle left and right. Do print, share the makes and have fun!

Downloads
347
Likes
103
Rating
0
P
PrintablesWard

Cafe Racer polyester seat

you can print the design in all possible settings, if you want to use it to really mount it on the motorcycle you will have to print it more firmly.

Downloads
344
Likes
22
Rating
5
P
PrintablesWesley Rogers

Airsoft Tracer Housing/Mock Suppressor

The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…

Downloads
339
Likes
44
Rating
5
P
Printablesc_irons

Three Lane to Two Lane Fat track merger for Crash Racers

A 16 inch lane merger to allow 3 straight track pieces to merge into the crash racers fat track. The merger is pre-split to 2 pieces in fusion 360 to fit 200mm length print beds. All parts can connect with standard hot wheels track…

Downloads
335
Likes
71
Rating
5
P
PrintablesJcsrf

Tracer 7/700 Central Handle Bar

This part allows for a temporary/permanent replacement for the central handle bar on your Yamaha Tracer 7/700 (new model 2020). I have kept mine for about 300 kilometers, driving in all type of conditions and terrains without an issue.…

Downloads
333
Likes
7
Rating
0
P
PrintablesAaronF.

Tracer 9 & GT Side Case Wall Mount

Inspired by the original part, my design with some little extra feature. You can lock and secure your Sidecase on the Wall. The Part needs minimal Support. Printed in Pla, Bambu Settings 0,2 Strong / 6 Walls with some Supports in the…

Downloads
333
Likes
19
Rating
0
P
PrintablesZodiase

Long Mock Suppressor (requires tracer unit with threads)

Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…

Downloads
330
Likes
31
Rating
5
P
Printables365lyf

Simhub - Vocore 4.3" Thrustmaster T300/T500/TS-PC Racer/TS-XW Dash

This is a completely original model, and is the result of 16 different iterations on the design. I tried to create the most modular (for future adaptability to other wheels) and compact unit as I possibly could and printable without…

Downloads
318
Likes
36
Rating
0
P
Printablesciubecca

FLSUN SR ( Super Racer ) six swappable / interchangeable accessories

FLSUN SR ( Super Racer ) six swappable / interchangeable accessories SD card USB holder Tools holder Pliers holder Spatula holder Storage Box (with optional lid) Storage Box Large (with optional lid)

Downloads
310
Likes
48
Rating
5
P
Printablesneotgp

Small ramp for RC or lego racers

Small ramp I designed and printed for my children to use with the lego stunt motors. It might not be the most efficient print, but it gets the job done :). Printed with supports, .6mm nozzle.

Downloads
290
Likes
35
Rating
0
P
PrintablesCodeMinion

Goblin Slayer - Bracers

STL Files for cosplay Goblin Slayer bracer. Assembled Dimension: 88.1 mm (w) x 215.6 mm (d) x 23.0 mm (h) Minimum Printer Volume Required: 250 mm x 250 mm x 250 mm Fusion 360 Link: https://a360.co/2M5j2oo Extra: 4 x ADA screws from Home…

Downloads
280
Likes
120
Rating
4.5
P
PrintablesTeachingTech

Super Racer auto ejection belt conversion

I wanted to have a 3D printer capable of ejecting completed parts and work through a print queue automatically, but without compromising the kinematics or build volume. My solution is to add a conveyor belt over the heated bed of a delta…

Downloads
276
Likes
110
Rating
0

FLSUN SUPER RACER SR - HF Fan Duct

Improved fan duct for FLSun Super Racer

Downloads
270
Likes
20
Rating
5
P
PrintablesPropsmaker

Innovative 3D-Printed Medieval Bracer Design

Hey fellow creators! Just wanted to share my latest project: a meticulously designed medieval bracer inspired by historical armors. A lot of time and effort went into making sure it's not just historically accurate, but also comfortable…

Downloads
269
Likes
81
Rating
5
P
PrintablesRyanMaverick

FLSun SR Super Racer - Effector DirectDrive w/Sherpa mini & Mosquito

***************** *** ITALIANO *** ***************** Non è più un problema stampare il TPU con la Super Racer! Ho progettato un nuovo case per trasformare l'Effector da Bowden a DirectDrive e, per l'occasione, ho pensato di installare uno…

Downloads
267
Likes
32
Rating
0
P
PrintablesMAKERACER

Mini Offroad 1:45 Toy Car by MAKERACER

OVERVIEW This is a fully 3D-printable 1:45 car built as a display model or functional toy. It’s a beginner-friendly project . No cutting, no printing supports, no screws and hardware needed. You print the parts (~6h), assemble them in 10…

Downloads
266
Likes
61
Rating
5
P
PrintablesModel Magic

Speed Racer - Speed Racer & Mach 5 - 1967-1968

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
265
Likes
37
Rating
0
P
Printablesishikawats

Finger Racers

This is a little racing toy for fingertips: The model is oriented for easy printing. No supports should be needed. Plain bearing is print-in-place. The “pedals” are printed as one piece but breaks apart for press-fitting into the wheel…

Downloads
261
Likes
103
Rating
5
P
Printableschappyman66

Italian Racer Slot Car Kit

This is a basic kit for a slot car. I took the shell, lightened it, removed the windscreen and made a buck for vacuforming the glass. I also provided a chassis based on my adjustable wheelbase chassis. It takes a standard pod, you could…

Downloads
260
Likes
27
Rating
0
P
Printablesrobosocks

Dualracer Hot Wheels Clamp by TokamakH3 REMIX

Print the clamp so that the XY planes are in the largest faces. Print the screw with the flat side down. These are the strongest orientations.

Downloads
242
Likes
29
Rating
5
P
PrintablesCraycle

Crow Racer 750 V2 mm FPV Racer Plane - Test Files

⚠ This is NOT the entire model! This is a demo/test version. 🚀 This file is designed for those who want to try Craycle airplane kits before purchasing. Note: Download the text file to reach all items! 📦 Contents of this package: ✅ Craycle…

Downloads
240
Likes
33
Rating
0
P
PrintablesAntoine F

Support Bobine FLSUN SUPER RACER SR

Support de bobine pour FLSUN SR équipé de 2 roulement type 608. Le bras métalique d'origine est conservé pour garder la rigidité de l'ensemble et imprimer le support en simple PLA. Prévoir 2 vis M3.5 longueur 15 et 2 écrous pour la…

Downloads
238
Likes
22
Rating
5

Clan Wren Inspired Mandalorian Bracers

I recommend downloading the .zip file not the individual files These 3d models can be used to print bracers similar in style to Ursa Wren as seen in her Rebels episode. On parts such as the Right arm side attachment, there are holes sized…

Downloads
237
Likes
60
Rating
5
P
Printables75echo

Tracer Pellet Painting rack .177 (4.5mm)

Designed to be printed in PLA. 20% infill , 0.2 layer height. Print upside down. for best results , first prime the base then paint with flourecent orange paint. Optimised for JSB pellets but will work for a lot other brands.

Downloads
236
Likes
49
Rating
5
P
PrintablesPeter Farell

Gothic Tracery Pendent.

Gothic Tracery Pendent. I designed a LoRa for Gothic Tracery and tested out its output with displacement. You can find the LoRa for stable diffusion here. Gothic Tracery - v1.0 | Stable Diffusion LoRA | Civitai

Downloads
231
Likes
85
Rating
0
P
PrintablesJerome

Drone racer stand

Fit all my 5" quads (True-X and Squished). Can be scaled for 4 and 3" (75% fits well for a 3-4"). Print without support ! 3 versions with longer/shorter feet. Print Settings Supports: Doesn't Matter Custom Section Category: R/C Vehicles

Downloads
230
Likes
18
Rating
5
P
PrintablesThesBer

FLSun SR first layer test - Super Racer erste Schicht Test

I was looking for my FLSun Super Racer 3D printer a first layer test, but couldn't find something that met my or delta 3d printer requirements. So I created this two designs for 0.2 mm layer high. Happy printing Toni…

Downloads
226
Likes
6
Rating
4

T ford T racer yaer 1917 Designer Ed van der Heijden.

T ford T racer yaer 1917 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA

Downloads
226
Likes
46
Rating
0
P
Printablesfasa38

Wall suitcase support for Yamaha Tracer 9/9 GT

I reccomend to use PETG filament, 0.2 layer. For no supports rotate it.

Downloads
225
Likes
7
Rating
0
P
PrintablesAizel 330

FLSUN Super Racer direct drive 5015 MOD

Henlo everyone, I've made this main body adaptor for my Flsun Super Racer because I've bought a omg v2 and I want to use it as a direct drive but all the desing I found don't have enough space for it and a double 5015 fan so I've tried…

Downloads
217
Likes
19
Rating
4
P
Printablesprouting

FLSUN SR (SuperRacer) Enclosure

Enclosure for FLSUN SR with acrylic panels with door aperture. Update!! Active Heat Chamber for enclosure here : https://www.printables.com/model/1193992-flsun-sr-active-mini-chamber-heater For Print larges parts undivided pieces is…

Downloads
209
Likes
29
Rating
5
P
PrintablesCurious Mint

Star Wars Anakin's Pod Racer - Lego

Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. 40% infill. Bricks are broken down by their hex color for printing in a matching color. Good accuracy is…

Downloads
208
Likes
62
Rating
0
P

LEGO The Mach 5 Speed Racer

LEGO The Mach 5 Speed Racer

Downloads
207
Likes
34
Rating
0
P
Printablesms j

Assembly Manual - BUGATTI 100P ' RACER SPIRIT'

Refer to the free assembly manual. You can check it by test printing of small part attached. Flight Video https://youtube.com/shorts/GwDV2npC8tI

Downloads
199
Likes
9
Rating
0
P
PrintablesMigueppc

Contour Tracer / Scribing Tool

Accessory for copying shapes, contours, and outlines with precision. This tool features a sturdy fixation base with pointed and rounded ends on opposite sides, allowing for versatile usage on various surfaces and objects. M6 screw with…

Downloads
199
Likes
30
Rating
0
P
PrintablesDaniele

Flsun Super racer filament mount

filament mount for flsun super racer

Downloads
196
Likes
24
Rating
5
P
PrintablesCalebTimoteo

Sebulba Podracer - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Downloads
195
Likes
30
Rating
0
P
PrintablesMorty_Fire

Voronoi Membrane FPV-Wing-Racer

Remix based on Whitespace's FPV-Wing-Racer . Wings: Printed with PETG onto 0.1mm BoPET sheets for an extremely smooth surface. (The process is very similar to this study here: https://www.nature.com/articles/s41598-021-98242-y ) The black…

Downloads
191
Likes
63
Rating
0
P
PrintablesGuilouz

FLSUN Super Racer Cable Guide

FLSUN Super Racer Cable Guide

Downloads
182
Likes
35
Rating
5
P
PrintablesJPS Designs

Formula 1 RC Car Shells for Pocket Racers

F1 themed RC car shells specifically for RC Pocket Racers through As Seen on TV. The cars are approximately 1/67 scale. My family got several of these and we are big F1 fans and wanted to create our own races with cars that we recognized!…

Downloads
181
Likes
50
Rating
0
P
PrintablesTacticalBeanie

TM KSG - T238 shotgun tracer adaptor

Adaptor for the Tokyo Marui KSG airsoft gas shotgun to allow mounting of a T238 Shotgun tracer unit. Note: I recommend printing on its side with supports to help take the weight off the layor line direction and printing in PETG/ABS, Im…

Downloads
180
Likes
14
Rating
0
P
PrintablesMaster Yoda

Cafe Racer Motorbike silhouette

I have created this ornamental sculpture of a cafe racer motorcycle entirely from the ground up. You have the flexibility to adjust its size, enlarging it, reducing it, or maintaining it flat, similar to the images I have provided. This…

Downloads
179
Likes
23
Rating
5
P
PrintablesMaverick0197

ASG CZ Scorpion AEG - Tracer Cover

Update 09/02/2020: Added a Version 2 that shrinks the gap between the cover and the front of the gun. Distance from front of tracer to rear of cover: V1=110mm V2=122mm Tracer Cover designed for the new ASG CZ Scorpion AEG when using the…

Downloads
178
Likes
34
Rating
0
P
Printablesgreath

FLSun Super Racer Hotend - 5015 - Sherpa/Orbiter v2 - Direct Drive or Bowden

The model works with a bowden setup as well as an Orbiter v2. Sherpa design is untested, but should work. Will update when confirmation of it working. Additional hardware (screws and such): 8 - M3 heat set inserts 2 - M4 heat set inserts…

Downloads
171
Likes
29
Rating
3.5
P
PrintablesFlightClub

MCK Racer

MCK Racer camera and antenna mount

Downloads
171
Likes
1
Rating
0
P
PrintablesYavorh

Drag Racer V1 - Brick3D set

Our first major constructor brick set - the Drag Racer! Build it either by our model or in any configuration or size you want - do you want 6 wheels or 2 engines? Just print as many as you want - once you buy the files, their yours…

Downloads
169
Likes
92
Rating
0
P
Printablestuna-fish

Exposure TraceR Saddle Mount

Designed to clip on rail from below first, then other side from top so they counter act and less likely to pop off; a sort of clip twist. Light can be clipped in before or after mounting to saddle. Should clamp opening should point…

Downloads
163
Likes
6
Rating
0
P
PrintablesCarlo Blumer

FLSUN SUPER RACER UTOOLHEAD REMIX REINFORCED

I took the excellent work by VICLER which you can find on cults3d or thingiverse at the following links. https://www.thingiverse.com/thing:5434220 https://cults3d.com/en/3d-model/tool/flsun-super-racer-utoolhead MY REMIX The project was…

Downloads
162
Likes
23
Rating
0
P
PrintablesC B

Webcam Holder Flsun V400&SuperRacer for CAMs (1/4 Zoll (6,35 mm))+Screw

Webcam Holder FLSUN V400 & Super Racer(NewFrame) for all CAMs with (1/4 Zoll (6,35 mm) & Super Racer (OldFrame) - separate file !!! z.B.Logitech : C925e,C922x,C922,C930e,C930,C920,C615,StreamCam, & all CAMs with same screw connection (1/4…

Downloads
162
Likes
6
Rating
0
P
PrintablesDenjo

XC Tracer Maxx I/II Flip Case

XC Tracer Maxx I/II flip case to mount your XC Tracer screen up or screen down, so you can leave your device on the cockpit without scratching it. Features: USB port and button accessible in flight position button covered in transport…

Downloads
162
Likes
8
Rating
5
P
PrintablesVincent12FPV

GEPRC RACER CAMERA MOUNT

To make the GEPRC RACER compatible with the CADDX vista NEBULA PRO

Downloads
160
Likes
8
Rating
0
P
PrintablesChris Lee

MCK Racer STL Mashup

Some MCK Racer 3d prints I tried printing with my builds.

Downloads
159
Likes
2
Rating
0
P
Printablesjmeb

Dynaplug Racer Pro Mounts

A simple mount for Dynaplug Racer Pro. This is designed to be relatively low profile. EDIT: 4/30/2026 -- Added an inline mount version. This model has 20mm of built-in adjustment. It is based on a 40mm tube diameter, with the Dynaplug…

Downloads
158
Likes
5
Rating
5
P
PrintablesTom_R

Hot Wheels Wall Racers Bracket

Hotwheels Wall Tracks Bracket. I designed these for my son's wall track because he kept breaking the yellow ones. So far they have held up much better than the originals. I made them so the platform will swivel and they can slide left and…

Downloads
157
Likes
30
Rating
4
P
PrintablesPéPé Stéf

DRONE RACER HD-ONE-2.5-POUCES

Compatible HD-ONE-2.5P UNITÉ DJI AIR, WALKSNAIL, CADDX VISTA. Préconisation pour avoir un drone ultra résistant : Il faut absolument utiliser du NANOVIA TPU70D ( dispo en Black, Gris et Neutre) que vous allez pouvoir commander chez…

Downloads
156
Likes
31
Rating
0
P
PrintablesMarkus Schmidt

Kabelführung FLSun SuperRacer

Kabelführung oben Mir hat die Befestigung des Kabelstrangs oben an der Metallplatte mit einem Kabelbinder nicht so richtig gefallen. Die von mir konstruierte Kabelführung mit Abknickschutz ist einfach zu montieren ohne daß man das Kabel…

Downloads
152
Likes
22
Rating
5
P
Printablesh00rj

Adventure Force Nano Racer Rocket League Fennec Body

I printed the Fennec found here https://www.thingiverse.com/thing:4834994 at 50% and noticed it's almost the exact size for these little RC cars I got for the kids a while back. Hollowed out the model & stretched it out a bit to make the…

Downloads
152
Likes
7
Rating
0

Geometric Cafe Racer motorcycle - model 3

Happy printing! Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid layers: 4

Downloads
150
Likes
29
Rating
5
P
PrintablesUPWDesign

RECLAIMER: Dual Stage, Tracer, Stock, and Some Other Mods for Project Mjolnir

EDIT 20231015 : Added Modular BCAR files and files for Momentum motors (Protostar). Recommend 30A 4-in-1 ESC or greater. The design accommodates mounting for 20mm square ESCs, but larger ESCs should fit in the housing. (Be sure to…

Downloads
148
Likes
38
Rating
0
P
Printablesengineered

Vtech Remote Racer Smart Car drive gear, Model:1264

Drive/transmission gear for a Vtech Remote Racer gearbox. The original was some soft plastic that quickly wore out, unlike the other similarly sized nylon gears that are also in the gearbox. The new PLA gear works well but is noisier, so…

Downloads
145
Likes
11
Rating
5
P
PrintablesLJ309

FLSUN SR Super Racer Wire Cord Plug Protector

As soon as I put my SR together, I immediately pictured something like this to cover up the multi-colored plugs connecting the effector to the mobo. Print two and connect them together with zip ties through the slots. Someone who is a…

Downloads
142
Likes
18
Rating
4
P
PrintablesRevaice

bracer

bracers for Larping or cosplay. Should be printed in PLA to bend the parts after printing

Downloads
139
Likes
34
Rating
0
P
PrintablesSponge

FPV-Wing-Racer (rev.2) Walksnail

Remix Original Designer Whitespace 💗 Features: 25.5mm x 25.5mm Mounting Space inside for RX and ESC Canopy, Still need to test the Canopy About ~87g Parts I used: Receiver TBS CROSSFIRE NANO RX ESC DYS XSD 7A BLheli_S Servo PES GH-S37A…

Downloads
139
Likes
45
Rating
0
P
PrintablesGuilouz

FLSUN Super Racer PITFT70 Case & Mount

FLSUN Super Racer PITFT70 Case & Mount. - Use x4 M2.5x8 screws to fix screen to back cover - Use x2 M2.5x16 to fix front cover to back cover - Use x2 M2.5 x13 to fix back cover to support I have also include Spool Holder that use x4 608ZZ…

Downloads
138
Likes
33
Rating
0