Search results: radiation

Sort order

142 models

P
Printablesfoorschtbar

Radiation shields for DIY weather station

A universal radiation shield for various environmental sensors such as temperature, air pressure or humidity. It is recommended to print the radiation shield from PETG or another UV stable material. Print instructions Parts 2x Stainless…

Downloads
697
Likes
112
Rating
4.8
P
Printablesagmcmll

Helical rain/radiation shield for weather sensors with sensor mounting

This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…

Downloads
217
Likes
22
Rating
5
P
PrintablesYourigh

Radiation shield for Xiaomi Mijia thermometer meteostation / no supports

Radiation shield or sun shield for Mijia thermometer. I was using this thermometer for about 1,5years outside (-10°C to 45°C) under simple PLA 3d-printed roof and it worked well (despite that it should be indoor one.) The roof was…

Downloads
179
Likes
34
Rating
5
P
PrintablesLukáš Foukal

Mount and Radiation Shield for Netatmo and Generic 433MHz Weather Station

This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…

Downloads
172
Likes
30
Rating
5
P
PrintablesblueMage

Ionizing Radiation Placard with Magnet Mount

Display ionizing radiation warning sign where needed. Use neodymium-iron-boron magnet 10 mm diameter by 3 mm tall glued into mount. It holds up the sign on a steel cabinet.

Downloads
37
Likes
3
Rating
5
P
PrintablesBatu

Solar Radiation Shield

Simple solar radiation shield (Stevenson screen) optimized for printing with minimal hardware requirement. Only downsize is the core size being only for small sensors and probably not capable of containing the logger.

Downloads
399
Likes
39
Rating
0
P
PrintablesThom-x

Weather Station with a Custom Radiation Shield - One piece

Elevate Your Weather Station with a Custom Radiation Shield Introduction: Upgrade your weather station setup with a specially crafted radiation shield, designed to optimize sensor performance and accuracy. This single-piece solution…

Downloads
362
Likes
52
Rating
4.6
P
PrintablesLevi Sitts

Radiation Shield

I designed this radiation shield to monitor the temp/humidity outside, together with a raspberry pi zero. Design is loosely based on this one , but I wanted to print the whole thing without metal hardware. You should only need zip ties to…

Downloads
352
Likes
29
Rating
4.8
P
PrintablesClough42

Solar Radiation Shield (Stevenson Screen) for Outdoor Thermometer

This is a solar radiation shield for mounting a temperature sensor outdoors. The shield allows air to flow through freely, but protects the thermometer from direct and reflected solar radiation. This provides a much more accurate…

Downloads
351
Likes
46
Rating
5
P
PrintablesEvgen Orlovsky

Radiation keychain

Simple radiation keychain

Downloads
283
Likes
52
Rating
5
P
PrintablesMakerMeik

Radiation shield "Stevenson screen" temperature sensor (weather station)

Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…

Downloads
276
Likes
38
Rating
4
P
Printablesedison_cz

Weather radiation shield

This is a weather radiation shield for Pimoroni BME680 Breakout board. The Bosch BME680 gives you precise measurement of temperature, humidity, pressure, air quality index, bVOC and CO2 equivalent in the air and offers easy integration…

Downloads
256
Likes
38
Rating
0
P
PrintablesElectricDodo

Geiger Counter Enclosure (CAJOE RadiationD v1.1 with optional ESP8266)

An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…

Downloads
225
Likes
21
Rating
5
P
Printablessozo13

Radioactive . radiation logo

3 logos one with background other without raised so you should be able to easy to do a manual multicolor print 1 inverted Edit: originally uploaded some improperly scaled files ..i fixed that sorry for anyone who had issues

Downloads
219
Likes
13
Rating
5

Fallout Radiation King Television 1/4 Scale

I picked up playing the game again, and it has been a long while. While playing, I came across the Radiation King TV which is one of my favorite in game props. Just a lovely design. I've had this in my project book for a while so I dug…

Downloads
218
Likes
78
Rating
0
P
PrintablesZbyněk Král

Radiation Shield for TP-Link Tapo T310 Sensor [Remix] [Update]

I found an excellent radiation shield model from @ilMitch_97530 . Unfortunately, I don't use Aqara sensors. So I adapted the original holder for the temperature and humidity sensor TP-Link Tapo T310. It was easy because the author also…

Downloads
202
Likes
23
Rating
0
P
PrintablesBenny

Ecowitt WH57, WH32 holder - radiation shield

Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…

Downloads
200
Likes
24
Rating
5
P
Printablesscientress

Solar Radiation Shield aka Stevenson Screen

This is a Solar Radiation Shield aka. Stevenson Screen for Air Temperature and Humidity Measurement. It's inspired by micromet's shield but I redesigned it from scratch. It should be compatible with sensor mounting adapters for their…

Downloads
179
Likes
18
Rating
5
P
PrintablesPrintess

Stackable radiation coaster (NO MMU needed)

I made these coasters in 2 parts that click together. There is a groove in the bottom of the coasters so they stack neatly on top of each other. The diameter of these coasters is 90mm. The height of the coasters is 4mm (this is including…

Downloads
167
Likes
41
Rating
4.67
P
PrintablesOK1HRA

Double radiation sun shield for thermometer DS18B20

3D printed shield, against overheating of the thermometer in direct sunlight. The doubling of the shield makes it possible to better shield the salve heat from the heated outer shield. Assembly manual

Downloads
166
Likes
25
Rating
5
P
PrintablesValentino Hesse

Small weather station - radiation shield

Small weather station - radiation shield for placing the WEMOD D1 mine module and any sensor in my case MPE280.

Downloads
157
Likes
34
Rating
3
P
PrintablesVger1981

Case for radiation detector

Here is my version of the well known box, modified to fit a Bosean FS-5000 radiation detector. Material used: M3x8 countersunk 8x. M3x35 hex, or 3mm rod 6x. EVA foam, thickness 2, 5, 10mm. Templates for cutting are included in files.…

Downloads
156
Likes
45
Rating
5
P
PrintablesAnna Lebedeva

Radiation Hazard Trinket / Keychain / Pendant

РУССКИЙ Внешняя часть напечатана черным пластиком PETG. Внутренняя часть напечатана флуоресцентным желто-зеленым пластиком PLA. Центральная часть светится под ультрафиолетом. Сборка: обработать края внутренней части чтобы не цеплялись во…

Downloads
156
Likes
24
Rating
4.5

Hardware-Free Radiation Shield for Environmental Monitoring

This is a hardware-free, fully 3D-printable radiation shield designed to protect environmental sensors (like the FS400-SHT31) from sun and rain. By shielding the sensor, it allows for more accurate ambient temperature and humidity…

Downloads
151
Likes
9
Rating
3.5
P
PrintablesGuyonacouch

Bic ligher case Radiation symbol

A lighter case designed to fit your standard size Bic lighter adorned with the radiation symbol.

Downloads
149
Likes
28
Rating
0
P
Printablesbilliaden

Glow-in-the-Dark Radiation Symbol Keychain Multi-part

Glow-in-the-Dark Radiation Symbol Keychain A two-part keychain featuring the international radiation hazard symbol . The design is simple, effective, and perfect for a quick print. Two-Color Design: The black outer disk and the colored…

Downloads
133
Likes
47
Rating
5
P
PrintablesFreman

Temperature and Humidity Solar Radiation Shield

Wanted to provide more accurate temperature and humidity readings for my home weather station by moving the Ecowitt WH32 sensor out of the patio (lots of concrete around) This is a modular press fit radiation shield that'll hold 2 WH32…

Downloads
131
Likes
14
Rating
0
P
PrintablesEricYUL

Radiation Shield for AcuRite, LaCrosse and other similar thermometer

This is a wall mounted solar radiation shield for a wireless thermometer. It will be compatible with devices that fit inside a tube of 50 mm in diameter. Print as many rings needed to fit the height of your device. Print without support…

Downloads
131
Likes
18
Rating
5
P
PrintablesKingsouth27

Fan Cover for Centauri Carbon with Radiation Symbol

Remix Fan Cover for Centauri Carbon with Radiation Symbol, to match I also made the Side panel protector found here : https://www.printables.com/model/1370009-9-designs-elegoo-centauri-carbon-side-panel-protec please post your makes i'd…

Downloads
126
Likes
16
Rating
0
P
Printablesar3Dprints

Radiation Sign and Keychain

http://www.prusa3d.com/#a_aid=3090

Downloads
126
Likes
11
Rating
5
P
PrintablesChyneuze

Thermo/Hygro/Baro Radiation Shield

Heat Radiation Shield for my ongoing weather Station. It using a BME280 probe ( https://fr.aliexpress.com/item/32930504331.html?spm=a2g0s.9042311.0.0.27426c37PCIFJB ) No supports is needed for printing. Printed with an Ender 3 Pro.…

Downloads
121
Likes
6
Rating
0
P
PrintablesTim Snels

Laser Radiation

Laser radiation hazard symbol

Downloads
118
Likes
34
Rating
4.67
P
PrintablesDusanH

Aqara Temperature sensor radiation shield / housing (double wall)

Housing and radiation shield for Aqara Temperature and humidity sensor (Zigbee) WSDCGQ11LM with double wall. The model was specifically designed for 0,4mm nozzle in mind, with very conservative overhangs, so no supports are needed. It was…

Downloads
118
Likes
15
Rating
0
P
PrintablesEddi Maevski

Radiation Shield for Temp / Humidity Sensors, "Stevenson screen" Helical fins design

Helical fins based radiation screen for temperature / humidity sensors. Parts have tight tolerances and interfaces, calibrated printer is required. 4 parts are needed: Main screen part. (No supports) Wall bracket. (Tree supports) Sensor…

Downloads
113
Likes
7
Rating
5
P
PrintablesValentino Hesse

Tuya WiFi Smart Temperature And Humidity Sensor - Weather station radiation shield

Tuya WiFi Smart Temperature And Humidity Sensor Now the model is stronger, more robust and better to print. Printing without supports was preserved. The mounting base is now stronger and allows for screwing to a kenzole or some other…

Downloads
112
Likes
16
Rating
5
P
Printables3Dpetr_kolos

Modular solar radiation shield

Radiation shield A radiation shield is a device that serves to protect and place meteorological sensors, most often temperature and humidity sensors. Its main task is to protect the sensors from environmental influences that could distort…

Downloads
110
Likes
28
Rating
5
P
Printablesdsw73

Radiation Shield for esp32 weather station

Radiation shield for weather station which can hold an esp32 or esp8266 with a DHT22 temperature sensor. All parts can be printed without support except for the door to close the tube holding the electronics.

Downloads
109
Likes
14
Rating
0
P

Radiation sign molle patch

A molle patch with a radiation symbol that you can stick on your geiger counter pouch.

Downloads
107
Likes
32
Rating
5
P
Printablesteacup_3o5

Warning sign: ionizing radiation (radioactive)

A sign that warns of ionizing radiation.

Downloads
106
Likes
13
Rating
5
P
PrintablesSimpleton

Drinks coaster nuclear logo Fallout coaster radiation

Drinks coaster to stop you from spilling all over your desk again...

Downloads
101
Likes
20
Rating
0
P
PrintablesAilbeC

Radiation Sign

radiation sign

Downloads
100
Likes
6
Rating
0
P
PrintablesTarrant1701

Radiation Extruder Motor Indicator

I just discovered the joy of extruder motor indicators, and decided to make one myself! You will need to glue a 8x3mm magnet onto the smooth, flat side of the print. v1 - more industrial, sharp lines v2 - chamfered for that refined look…

Downloads
98
Likes
8
Rating
5
P
PrintablesTiskoviny.EU

Radiation - Extruder motor rotation indicator

EN: Radiation - Extruder motor rotation indicator This model was created to improve the visibility of movement and possible jamming of the filament on a camera with night vision and low FPS. V1: For one magnet with super glue. V2: For two…

Downloads
92
Likes
24
Rating
5
P
PrintablesEhisforAdam

Therianizing Radiation Rod Prop

Prop of a rod of a therianizing radiation source modeled after the famous Cobalt 60 radiation source rods. There are a few furry fandom easter eggs included. Mine was printed in Silk PLA.

Downloads
81
Likes
14
Rating
5
P
PrintablesMihovecDesign

Radiation Coaster (Coaster for Drinks) - Radiation Hazard Bundle

Radioactive Coaster Bundle by Mihovec Design for science lovers and enthusiasts. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need for…

Downloads
81
Likes
11
Rating
0
P
PrintablesHKOCH

Netatmo Outdoor Sensor Sun Radiation Shield

The model consists of several 3D-printed parts to print and assemble using the included instructions. You have to add screws and nuts by yourself. See the types in the PDF file (instructions)

Downloads
80
Likes
8
Rating
0
P
Printablesanimatedheaven

Nuclear radiation sign pendant

This is my nuclear radiation sign pendant - 3d printable model. Software used : Blender 4.2 This is a small single piece model, not separate parts. Units= cm Width = 2 cm Height = 2.28 cm Depth = 0.15 cm Available formats = STL Thanks :)…

Downloads
76
Likes
11
Rating
0
P
PrintablesJiri Dobry

Aqara Temperature Humidity Sensor Zigbee 2x LR4(AA) battery holder and radiation shield

A am using few Aqara Temperature Humidity Sensor sensors. But I was not satisfied with original CR2032 button as power source, therefore I made holder for 2x LR4(AA) combined with sun radiation shield. Aqara Temperature Humidity Sensor…

Downloads
76
Likes
19
Rating
3
P
PrintablesT3D.tisk
Downloads
75
Likes
4
Rating
0
P
PrintablesNick Tailor

Radiation enamel pin

ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.

Downloads
73
Likes
9
Rating
0
P
PrintablesChris

Radiation symbol keyring charm

The lines are multiples of .4 mm and will look best with a nozzle of that size. The symbol and outline are separate bodies that can be coloured in if you're using something like the AMS. Alternatively you can easily change colour by…

Downloads
72
Likes
12
Rating
0
P
Printablesm123

Radiation shield for Xiaomi Mijia LYWSD03MMC sensor

Minimum-size radiation shield for the Xiaomi LYWSD03MMC temperature and humidity sensor. Two parts snap together.

Downloads
72
Likes
9
Rating
0
P
PrintablesCM_3D_PRINT

RADIATION LED LAMP LIGHTBOX

🌟 Illuminate Your Space with the "RADIATION" Lightbox! 💡 Customize your lighting experience by incorporating LEDs for a warm and inviting glow, or simply appreciate it as a standalone decorative piece. The "RADIATION" Lightbox offers more…

Downloads
71
Likes
17
Rating
0
P
Printablesc0nsumer

Solar Radiation Shield for Outdoor Temperature Sensors (Variable Height w/ Chain Link Fence Mount)

About This is a customizable / generic solar radiation shield for temperature sensors. By printing one roof and however many 15mm tall main body pieces are needed you can hold whatever height sensor you need. Instead of being specific to…

Downloads
69
Likes
24
Rating
0
P
PrintablesPeter Farell

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Bonk Radiation Power Drink : Blutonium : Can Koozie : Team Fortress

Downloads
62
Likes
19
Rating
0
P
PrintablesVladimír Waas
Downloads
59
Likes
16
Rating
0

Forget Lab Safety, I want Super Powers - Radiation

I made this because I am a scientist and secrretly I want superpowers - These coasters are engineered to be different to the average bit of plastic you see on makerworld. Features: holes in the top surface to stop the coaster sticking to…

Downloads
59
Likes
21
Rating
0
P
Printablesmbrazdil
Downloads
59
Likes
3
Rating
0
P
PrintablesShadow Panther

Ant feeder dish - radiation symbol

Just a small dish to place the food for ants in. Has three sections for different foods and a handle that you can pick up with a pair of tweezers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill:…

Downloads
57
Likes
10
Rating
4
P
Printablesrocks247365

Protective Cover for Ludlum Pancake Probe Radiation Detector 44-9

I believe Ludlums.com may sell a replacement, but it's faster to print my own =) This design has a tapered cone shape so that it grips the probe, but also comes off easily. I printed in PETG with 20% infill, 0.2mm layer height. The…

Downloads
55
Likes
2
Rating
0

radiation/radiotherapy mask/fixator

this is a rough approximation of the appearance of a head fixator as would be used in a hospital during radiotherapy procedures. Normally these are custom made by radiologists by forming a thermoformable plastic sheet over the patients…

Downloads
53
Likes
4
Rating
0
P
PrintablesRPK

Mount and radiation shield

Sun protection for weather stations / sensors Sonnenschutz für Wetterstationen / Sensoren

Downloads
53
Likes
6
Rating
0
P
PrintablesHigany

Half Helical rain/radiation shield for weather sensors

Remix of agmcmll 's sunshade for direct wall mounting. I integrated the sensor mount, it has one screw hole to accept compact sensors like the SHT30. Print Settings Rafts: No Supports: No Resolution: Variable Infill: 15 Filament: EkoMB…

Downloads
52
Likes
4
Rating
5
P
Printablesghostprint84

star trek IV RADIATION PARTICLE COLLECTOR

star trek IV RADIATION PARTICLE COLLECTOR

Downloads
52
Likes
22
Rating
0
P
Printablesv3li

Radiation shields for 3d solarnode

Radiation shields for 3d solarnode https://www.printables.com/cs/model/922784-3d-solarnode-meshtastic

Downloads
51
Likes
17
Rating
5
P
PrintablesArewix
Downloads
50
Likes
4
Rating
5
P
PrintablesPajenicko

Radiation shield for expLORA CLIMA OUTDOOR

This printable enclosure is tailor-made for a wireless expLORA CLIMA sensor with a 868 MHz LoRa radio (powered by two AA batteries). It provides a rugged, well-ventilated housing for long-term temperature, relative-humidity and…

Downloads
49
Likes
8
Rating
0
P
PrintablesToolsToMars

3D and Laser Radiation Sign

I ordered a fibre laser for my 3D shop recently and i needed a way to warn people on their way in to put on their glasses. My company is called "Tools to Mars" so that's what that is about.

Downloads
48
Likes
13
Rating
5
P
PrintablesMeister Edel
18+

The source marked this model as adult content.

Downloads
48
Likes
22
Rating
5
P
Printablesdevicemodder

radiation symbol Ear stretcher single flare

This is a 21mm ear stretching plug, single flare with a radiation logo

Downloads
47
Likes
2
Rating
0
P
Printablesmnux

tiny radiation shield

A really small radiation shield I made for my wx station. https://mnux.xyz/p/wx-station/ screw size: M3 parts should be printed “upside down” like this:

Downloads
46
Likes
5
Rating
5
P
PrintablesAlaskan Astro

DHT22 Sensor Radiation Shield for Weather Station

a small box with pin inside that effectively shields and holds a DHT22 temperature humidity sensor. Allows airflow in but not water. I had this set up as an outside air temp and hum sensor for my all sky camera. Printed with the solid…

Downloads
45
Likes
6
Rating
0
P
Printables0kam

HOBO U23-001 Pro v2 Solar Radiation Shield

Overall Solar Radiation Shield for Onset's HOBO U23 Pro v2 Temperature/Relative Humidity Data Logger. You can install any small devices in it. e.g., SwitchBot Indoor/Outdoor Thermo-Hygrometer (…

Downloads
45
Likes
1
Rating
0
P
PrintablesPavel

vykrajovátko na zářící linecké cukroví (doplněná verze) - radiation cookie cutter (revised version)

zářící vánoce si přejí všichni. tak proč nezkusit toto.. bál jsem se aby se těsto nepřipalovalo v tenkých partiích, proto je znak tak malý ** doplněno - njn, ty dírky jsou moc malé, tak ještě revidovaná verze s větším symbolem Everyone…

Downloads
43
Likes
2
Rating
0
P
Printablestato_713

Cosmic Microwave Backround Radiation scaled one in 2*10^28

Originally published here: Cosmic Microwave Background Radiation scaled one in 2*10^28 by tato_713 - Thingiverse This model was made using the data of the Plank spacecraft of the Cosmic Microwave Background (CMB or CMBR), processed with…

Downloads
43
Likes
8
Rating
0
P
PrintablesSimoste1969

Solar radiation shield for weather stations with active ventilation

03/12/2025 : Added V2 of Vertical mount and Sensor mount printable file I'm currently working on a SPS30 mount to attach at the bottom of the sensor mount, also waterproof and WMO compatible This is a solar radiation shield designed to be…

Downloads
40
Likes
6
Rating
0
P
PrintablesPrinterMan

Radiation Warning Symbol

A Radiation Warning Symbol Swap your fillament partway through for a multicolor print If you enjoy this model be sure to drop a like and post your make Happy Printing Everybody

Downloads
37
Likes
8
Rating
0

Radiation Nema 17 Indicator

I made my own little indicator for the extruder. The yellow indicator has a diameter of 30mm and is mounted on the shaft of the Nema 17 motor. It looks good on my OMG extruder in black. Print Settings Printer Brand: Flsun Printer: Flsun…

Downloads
37
Likes
3
Rating
0
P
PrintablesJan Stanka

Ecowitt sensor radiation shield

[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…

Downloads
36
Likes
3
Rating
0
P
Printablesbart

UV/vis/fluorimeter cuvette holder with 4 LED slots for irradiation

This was migrated from my Thingiverse profile and is from 2015. A contraption which fits around a standard 1x1 cm (internal) pathlength UV/vis or fluorimeter cuvette. Four LEDs fit around the sides allowing the sample to be irradiated…

Downloads
35
Likes
1
Rating
0
P
Printablesagmcmll

Old Version- Helical rain/radiation shield for weather sensors

Update: An improved design can be found here: https://www.prusaprinters.org/prints/33136-helical-rainradiation-shield-for-weather-sensors-w This model is also on Thingiverse, and has continued to get downloaded almost as frequently as the…

Downloads
35
Likes
3
Rating
0
P
PrintablesProxFPV

Tuya Zigbee Outdoor Temperature Sensor Radiation Shield and Mount

Use an M5×10 screw to mount the holder onto the L-profile, and M2×12 screws to connect the radiation shield to the holder. Print with white PETG filament.

Downloads
34
Likes
11
Rating
0
P
PrintablesRoman S.

BME280 mount for Radiation Shield

BMP085 mount for "Radiation Shield For Weather Station Temperature/Humidity" by micromet. For the rest of the radiation shield follow this link: https://www.thingiverse.com/thing:1067700 Print Settings Rafts: No Supports: No Resolution:…

Downloads
34
Likes
2
Rating
0
P
PrintablesDestiny19459

Weather Station Radiation shield / Station meteo

English version Here is a shelter for different types of sensors, such as temperature, humidity, or gas sensors. It is very easy to print and install, either on a pole or on a wall. Its height can be adjusted as needed by printing as many…

Downloads
32
Likes
6
Rating
0
P
PrintablesDavid Fiala

WH1080 - temperature radiation shield mount with fan

Radiation shield mount with fan for cheap weather station kit: https://www.hadex.cz/t110-vnejsi-mechanicke-dily-k-meteo Separated to parts, no supports needed. Print from UV resistant filament - ASA or PETG for example Parts needed: 4020…

Downloads
31
Likes
4
Rating
0
P
PrintablesNo1070

Radiation Hazard Warning Sign

Radiation Hazard Warning Sign A clean two-color radiation hazard warning sign designed for FDM 3D printing. Features Easy to print No supports required Two-color design using filament change or multi-material printing Suitable for PLA or…

Downloads
30
Likes
2
Rating
0
P
PrintablesMr. Stunna

Radiation-Stand

Stand for the "Drop & Run Cobalt 60 Source Cylinder". I have created a stand here for the STL. file from "Slyka" in order to be able to line up the cylinders neatly. If the STL.-file of "Slyka" is printed in 100% size, the 13 cylinders…

Downloads
30
Likes
5
Rating
0
P
PrintablesFCUK

Fnirsi GC-03 radiation detector storage box

Fits tight, Print in place, Uses 3x5mm magnets. https://www.fnirsi.com/products/gc-03

Downloads
29
Likes
5
Rating
5

DIY Weather Station Radiation Shield

This enclosure is designed for mounting environmental/weather sensors (e.g., Temperature, Humidity, and Air Pressure sensors) and accommodates a 3 x 7cm PCB for an auxiliary electronic module. The sensor mounting features are specifically…

Downloads
28
Likes
5
Rating
0
P
PrintablesKlave

Therapeutic Ultrasound Power Meter (Radiation Force Balance)

I bought a therapeutic ultrasound machine from eBay and wanted to know if it really produces the claimed power output (it does). It's supposed to provide up to 3.4 W/cm^2. The transducer is claimed to be 1 inch diameter although the face…

Downloads
28
Likes
3
Rating
0
P
PrintablesBecker Thorne

Radiation Signage

Shop signage Category: Signs & Logos

Downloads
26
Likes
4
Rating
0
P
PrintablesArewix

radiation sign

token of international radiation sign

Downloads
26
Likes
3
Rating
0

Weather Station Radiation Shield for Temperature Sensor

Housing for temperature sensor. Works with BIUWING brand and possibly others.

Downloads
25
Likes
6
Rating
0
P
Printablesdavidhirka

Thermo/Hygro/Baro Radiation Shield Support Remix

I need to use that great shield for BME280 but for mounting on the wall.

Downloads
24
Likes
2
Rating
0
P
PrintablesHS_Martin

Radiation_warning_symbol buttons

Button that I created in tinkercad for the button contest.

Downloads
23
Likes
9
Rating
0
P
Printablespastrami4033

Aqara Zigbee Temperature Humidity sensor radiation shield + AA battery holder

Disclaimer This does not work well at protecting from solar radiation. The temperature on this day did not exceed 72 °F, but the sunlight hitting the wall behind it created a top temperature of 89 °F. I would only suggest using this in a…

Downloads
23
Likes
11
Rating
0

Stevenson Radiation Shield for IKEA TIMMERFLOTTE

Stevenson-screen style solar radiation shield for the IKEA TIMMERFLOTTE outdoor thermometer sensor (64mm x 18mm). Printable as one piece, no assembly needed. Features: - 5 angled louver plates (45 deg slope) for airflow + sun shading - 12…

Downloads
23
Likes
5
Rating
5

radiation cake topper

radiation cake topper

Downloads
23
Likes
5
Rating
0
P
PrintablesPiotrRago

Radiation Ring for Cisco Gold Ring

Radiation Ring for Cisco Gold Ring Take the main ring from Cisco :) Rescaling chart of his ring and also the plate: size 3- 87 % size 3,5 - 90% size 4 -92% size 4,5 -95% size 5 -97% size 5,5 - 100% size 6 - 103% size 6,5 - 105,6% size 7 -…

Downloads
22
Likes
3
Rating
0
P

Beware of radiation RUS (Осторожно радиация)

Printing Tips: Prints without support! Need 2 colours The inside part is loosely attached to the wall. You may need glue.

Downloads
20
Likes
2
Rating
0