Search results: rancher

Sort order

123 models

P
Printablespstimpel

Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com

This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
294
Likes
22
Rating
5
P
Printables3D Sets

Model 1: Rancher 4x4

Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…

Downloads
1,815
Likes
657
Rating
5
P
PrintablesCommon_Flu

Slime Rancher- Pink slime, Tabby slime, and Rock slime

What more could you want than 50 slimes in your home

Downloads
1,618
Likes
212
Rating
4.69

1:8 scale 1:10 scale pintle and pintle ball combo trailer hitch for 3d sets or universal, Rancher

You have option!! Four option on the pintle hitch alone Pintle hitch . Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link) Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the…

Downloads
1,093
Likes
229
Rating
5
P
PrintablesBenny

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 (normal and wagon) & Bamboo

Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…

Downloads
573
Likes
54
Rating
4.94
P
PrintablesMartin

Angry eyes for Rancher jeep from 3dsets.com

Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits

Downloads
462
Likes
35
Rating
5
P
PrintablesCristi D.

Angry Eyes Grill for Rancher 3dsets

Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer. Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel…

Downloads
460
Likes
36
Rating
5
P
PrintablesKnur

Low gear ratio belted gearbox for 3D Sets Rancher RC

Just to clarify - this model contains changed files only (based on Model 6 v 1.1.2), to build the whole thing you need other parts from one of the Rancher models from 3DSets:…

Downloads
458
Likes
141
Rating
5
P
PrintablesVojta

Open differential for 3Dsets Jeep Rancher

This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions. I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and…

Downloads
384
Likes
103
Rating
0

3D Sets Rancher - 12mm Hex Adapter

These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…

Downloads
381
Likes
57
Rating
4.67
P
PrintablesSonniik

Slime Rancher Plort Statue Flowerpot

Slime statue flowerpot I made for my bonsai tree. I printed this one scaled to 120 %. Supports are recommended for the top part of the mouth (organic supports worked best for me). The plort should hold inside without glue. I printed mine…

Downloads
374
Likes
88
Rating
4.33
P
PrintablesCJ I.

All in One Angry Eyes Grille for Jeep Rancher by 3dsets.com

I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…

Downloads
345
Likes
42
Rating
5
P
Printablescrt404

Slime Rancher VacPack Cosplay Gun

First, a slight apology, I am missing my files from the centre of the vacpack. You will have to model these yourself. To be honest, they would have to be varied depending on the motor you have, and the gearing that works for you. Also,…

Downloads
319
Likes
135
Rating
5
P
PrintablesDaniRodes

Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler)

I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…

Downloads
266
Likes
48
Rating
5

3Dsets metal gear axles for Landy Rancher Bamboo Black Crow

!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…

Downloads
238
Likes
78
Rating
5

Rancher grill 3dsets

Na fixaci dílu používám trochu lepidla, ale není to nutné.

Downloads
194
Likes
36
Rating
5
P
PrintablesSteve Eckerlein

3DSets - Landy/Rancher/Bamboo - GT2 Belt Gearbox (with metal pulleys)

GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…

Downloads
189
Likes
70
Rating
5

Batty Slime (Slime Rancher 2)

One of five slimes that I made a little after Christmas. Supports? No supports are required

Downloads
183
Likes
21
Rating
0

Yolky Slime (Slime Rancher 2)

One of five slimes that I made a little after Christmas. Supports? No supports required

Downloads
181
Likes
24
Rating
0
P
PrintablesKnur

3dsets Tube Doorstep for Rancher Wagon

Model is designed from scratch, based on Tube Doorsteps for Model 1 & 2 Required screws for assembly: 8x M3x10 2x M3x8 (rear screws) Intended to look good with accessory Tube Fender Flares for Model 1, 2, 6 , but it will fit with the…

Downloads
178
Likes
35
Rating
5
P
PrintablesMac

3DSets Rancher Segment Back Lights

Modular segmented back light for Rancher from www.3Dsets.com

Downloads
176
Likes
46
Rating
5
P
PrintablesDomukin

New Buck Coin Slime Rancher Token

The simple design can be printed on a 0.4 mm nozzle. The detailed design needs to be printed with a 0.25 mm nozzle. I made them to fit a standard poker chip tray.

Downloads
166
Likes
19
Rating
0

Sloomber Slime (Slime Rancher 2)

Supports? None should be needed This is one of six slimes I made over a break.

Downloads
163
Likes
11
Rating
5
P

Slime Rancher Slime Mold

This model set includes a two part mold that can be clamped together as well as a single part, fully enclosed mold. Both options allow you to pour in your medium of choice from the top to end up with a nice flat bottom and smooth top. If…

Downloads
162
Likes
188
Rating
4.5
P
PrintablesDaniRodes

Front and rear LED lights for 3DSets RC Jeep Wrangler (Rancher)

FRONT LIGHTS: I used silver filament for the light and black for the shape. Transparent filament for the turn signals. Then I cutted 2 circular shapes from the plexiglass used for the glasses of the model. BACK LIGHTS: I used black…

Downloads
161
Likes
35
Rating
5

Fire Slime (Slime Rancher)

I made this as part of a trio of slimes (the other two being the puddle and quicksilver slime). Supports? You shouldn't need supports, but if you print large enough, your slicer program might add supports under the eyes. I didn't have a…

Downloads
154
Likes
18
Rating
0

Angler Slime (Slime Rancher 2)

One of five slimes that I made a little after Christmas. Supports? The only part that should need support is the sphere

Downloads
149
Likes
18
Rating
0
P
Printablesbikemikeike

Slime rancher Water, Fire, Yolky, slime

A model based on the game slime rancher I had created on a 3d printer then painted with Mont Marto brand acrylic paint. Model made in blender.

Downloads
141
Likes
26
Rating
5
P
Printables3DPrintSOS

3DSets Rancher Beadlock Tire Lock Ring (2 Options)

My tire kept slipping on my rim with my Rancher wheels and Super Swamper tires. These rings help you "lock" the tire in place. There is also an option to use M3 nuts as weights — 48 per lock ring. Enjoy and post your makes! If you found…

Downloads
133
Likes
42
Rating
5
P
PrintablesBenny

3Dsets Jeep Rancher 4x4 Light with hole for 5mm led

3Dsets Jeep Rancher 4x4 Light with hole for 5mm led Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 25% Filament: Inland PLA Black/White Category: R/C Vehicles

Downloads
133
Likes
26
Rating
0

Lucky Slime (Slime Rancher)

This is a remake of a previous model I made that got ruined during printing. Most of the work went towards making the model more compatible with printing, although the ears and side stripes were redone completely. Supports? Like the Tabby…

Downloads
129
Likes
13
Rating
0

Ringtail Slime (Slime Rancher 2)

One of five slimes that I made a little after Christmas. Supports? Supports are need a few places for the tail.

Downloads
129
Likes
17
Rating
0

Quicksliver Slime (Slime Rancher)

I made this as part of a trio of slimes (the other two being the fire and puddle slime). Supports? You shouldn't need supports in any place besides the long horn things, but if you print large enough, your slicer program might add…

Downloads
127
Likes
9
Rating
0

Puddle Slime (Slime Rancher)

I made this as part of a trio of slimes (the other two being the fire and quicksilver slime). Supports? You shouldn't need supports, but if you print large enough, your slicer program might add supports under the eyes. I didn't have a…

Downloads
124
Likes
12
Rating
0
P
PrintablesHemi

3dsets Rancher stronger Ball joint for M5 threaded arm

Work in progress changed to READY TO MAKE! - 5.11.2020 Print, assemble, ENJOY Share your feelings down bellow in comments :) If you like it, you can support me with cup of coffee…

Downloads
123
Likes
25
Rating
5

Switch regulator Rancher

Switch for motor regulator of Rancher from 3dsets.

Downloads
122
Likes
26
Rating
4.67
P
PrintablesMarco

3DSets Model 1/2/6: Rancher 4×4 Türen

Ich habe für mein 3DSets Model 6 ein paar neue Türen entworfen. Die Fronttüren davon sollten auch bei Model 1 & 2 funktionieren. Damit der Spiegel besser passt habe ich auch die Original Spiegelhalterung angepasst.

Downloads
119
Likes
35
Rating
5
P
PrintablesMarkus_p

3DSets Side grille for Model 6 Rancher (Jeep)

This is a side grille for Model 6 Rancher from 3DSets . Use 4 Screws M2x8 and screw it into the side panel.

Downloads
109
Likes
33
Rating
5
P
PrintablesMarco

3DSets Model 6: Rancher 4×4 Wagon Haube

Ich habe mir für meinen 3DSets Model 6: Rancher 4×4 Wagon die Haube etwas angepasst. Die Haube hat Einlagen für die Lüftungsgitter. Für eigene Anpassungen habe ich STEP Dateien beigefügt.

Downloads
105
Likes
24
Rating
5
P
PrintablesGrimmires

Slime rancher ring box

It's a remix of https://www.thingiverse.com/thing:2610462 but I was unable to mark it as a remix. For supports I've used tree supports in Cura slicer and 0.16mm layer height Print Settings Printer: Ender 3 V2 Rafts: Doesn't Matter…

Downloads
99
Likes
37
Rating
0
P
PrintablesJosephPizzaPie

KING SLIME! - Slime Rancher

This is a REMIX of Slime Rancher- Pink slime, Tabby slime, and Rock slime and Crown (Remix with built-in comb)

Downloads
98
Likes
13
Rating
0
P
PrintablesDaniRodes

Hood Details for 3DSets RC Jeep Rancher (Wrangler)

I wanted to add some more details to my model, so here's what you'll find: -Hood Flap: This is the hardest part to print, I failed a lot of prints before make it. Print it slow with raft and support, 100%infill and 0,1 layer. In the…

Downloads
98
Likes
18
Rating
5
P
Printableshokiecode

Rancher Cow

Everyone's Favorite Bovine Kubernetes mascot comes to 3d-printing. I have attached the right-horn to the main cow body for easy printing.

Downloads
97
Likes
18
Rating
5
P
PrintablesHemi

3DSets Jeep Rancher 4x4 bumper hook

20.12.2020 EDIT - Added file Jeep Hook 1 V2 (a bit stronger). The V1 was too weak and cracked after first crash. Has the same mounting system so your predrilled holes may be used :) You will need M2x10 screws Drill 4 holes for each hook…

Downloads
94
Likes
20
Rating
5
P
PrintablesMichalP

Coffee mug for Rancher from 3DSets

Coffee mug for Rancher from 3DSets

Downloads
92
Likes
20
Rating
5
P
PrintablesPaindog

Jolly Rancher Wall Art 3 Color with Magnet holes

Jolly Rancher Wall Art Additional version with magnet holes. I printed mine with mag holes and did a filament swap for the white “Jolly Rancher” text then I printed the yellow separately and glued it on after.

Downloads
91
Likes
4
Rating
0
P
PrintablesDaniRodes

Tube Side Protections For 3DSets RC Jeep Rancher (Wrangler)

I re-designed those tube side protections to make them look the same as my real Jeep Wrangler. In the pictures you can see the right orientation for printing. Use raft anf tree supports. I used Overture Black Matte PLA 0,1 layer and 50%…

Downloads
89
Likes
18
Rating
0
P
Printablesgiannichele

3DSets Model 6 - Rancher Wagon stand

I made this stand loosely based on the one made by xBenny (https://www.thingiverse.com/thing:4139282) for the original Rancher. But since the Wagon version has the center of gravity further back I felt I needed something different. There…

Downloads
86
Likes
28
Rating
4
P
PrintablesSprzout

"Stanley" style mug for 3DSets Rancher

Recently finished my 3DSets Rancher Hardtop, and my wife fell in love with it. She took a look inside the interior, and was surprised to see how detailed it was, especially with the fact that it had cup holders. Jokingly, she said, “You…

Downloads
86
Likes
13
Rating
0

Shadow Slime (Slime Rancher 2)

One of five slimes that I made a little after Christmas. Supports? No supports are required

Downloads
85
Likes
15
Rating
0
P
Printables3DP-MAMSIH

Wheel Base Rancher 4x4 Beadlock

Some tweaking for the rim on add slot to have more grip inside the tire and make it bigger than the original for about 3mm so can get more tight i use the 1.9/107mm inch tires Hope this help Big Thanks for the 3d sets

Downloads
85
Likes
24
Rating
0
P
PrintablesDaniRodes

Third Brake Light for 3DSets RC Jeep Rancher (Wrangler)

Third working brake light for the 3DSets Jeep Rancher RC, using 5 micro LEDs from Aliexpress https://it.aliexpress.com/item/1005005930441321.html?spm=a2g0o.order_detail.order_detail_item.3.2122582fN0Fgup&gatewayAdapt=glo2ita The third…

Downloads
84
Likes
23
Rating
0
P
PrintablesTwobit

Rancher 4x4 Suspension Lift Kit

4-Link Suspension Kit for Rancher 4x4 or other models with similar suspension. This is a “Bolt-On” kit that requires no reprinting of most of the existing parts Just the Center Chassis Mount. All parts bolt onto existing holes or…

Downloads
80
Likes
30
Rating
5

Pink Slime (Slime Rancher)

Supports? No supports are needed This is one of six slimes I made over a break.

Downloads
79
Likes
7
Rating
0
P
PrintablesPlasmo.cz

Holder for Jeep Rancher Wagon by 3Dsets

Stand for 3Dsets Jeep Rancher Wagon 4x4. Category: Vehicles

Downloads
79
Likes
31
Rating
5
P
PrintablesDaniRodes

Steel Rims for 3DSets RC Jeep Rancher (Wrangler)

I wanted to re-design the rims of my Rancher RC model to make them look the same as the rims of my Jeep Wrangler. I've also added the brake disks. Printed with Overture Matte PLA 100% infill, 0,10 layer and ironing enabled.

Downloads
79
Likes
16
Rating
5
P
PrintablesSrendi

Slime Stage from slime rancher

It can be tricky to print the spotlights. I recommend a slow print speed at these spots

Downloads
78
Likes
19
Rating
0
P
PrintablesFranCis

3Dsets Rancher - axle extension by 10mm and reinforced

CZ: Úprava dílů pro vozidlo 3DSets Model 2 Rancher 4x4. Zaměřeno především na těžký terén pro expediční vyjížďky. Původní model: https://3dsets.com/product/model-2-rancher-4x4-hardtop/ Rozšířené osy o 10mm na každé straně a zesílené +…

Downloads
77
Likes
36
Rating
5

Boom Slime (Slime Rancher)

Supports? None should be needed. I wanted to wait until I had four other red slimes to post this, but I thought I might as well since I have it done. I'm thinking of and making other models besides slime rancher, but here's the rest of…

Downloads
76
Likes
10
Rating
0

Tabby Slime (Slime Rancher)

This is a remake of one of my earliest models I've ever made. I'm happy with the improvements I've made (except the eyes, those just look a bit odd). Supports? The only area you should need supports is the side stripes area. However, it…

Downloads
75
Likes
11
Rating
0
P
PrintablesSirBeck58

3D Sets Rancher Model 1 Stand

Stand that supports the Rancher Model 1 in the middle Chassis and clears the linkage. May fit other 3D sets, but I am not 100% sure what their center chassis look like. You will need (8) M3 screws no longer than 12mm but long enough to…

Downloads
69
Likes
13
Rating
5
P
PrintablesDaniRodes

Light Bar + Side Lights for 3DSets Model 5 Rancher (Jeep Wrangler)

DISCLAIMER: Those aren't easy parts to print and asseble, please make sure that your printer is very well calibrated and take your time to edit your slicer to make good prints! I used Overture Black Matte PLA, and Overture Transparent…

Downloads
68
Likes
25
Rating
0
P
PrintablesHemi

3DSets Rancher 4x4 tube roof version roof rack

This is designed for Jeep ''Rancher'' from 3Dsets with tubular roll cage As the ''summer'' version, I need a surfboard holder for my Rancher. BOM 12x M2x6 (You need to drill holes into your roll cage for this. Print Settings Rafts:…

Downloads
68
Likes
24
Rating
0
P
Printables3dmango

Holiday slime Rancher

A remix from the website thingiverse link https://www.thingiverse.com/thing:1613714/files

Downloads
68
Likes
16
Rating
0

Glitch Slime (Slime Rancher)

Supports? None should be needed This is one of six slimes I made over a break.

Downloads
65
Likes
8
Rating
0

Quantum Slime (Slime Rancher)

Supports? None should be needed This is one of six slimes I made over a break.

Downloads
64
Likes
5
Rating
0

Repro Rancher

I make a little bit upgrade of the repro in Rancher from 3dsets

Downloads
63
Likes
19
Rating
0
P
PrintablesSejnyM

Rancher by 3DSets - 3542 Motor mount for belted gearbox

Tested with Kavan C3542 motor and fit perfect. Need longer screws for installation to gearbox( 4x M3x20(25).

Downloads
63
Likes
15
Rating
0

Rad Slime (Slime Rancher)

Supports? Supports are needed for the ring. Also, be careful with the ring; the ring is thin are could break if you're not careful. This is one of six slimes I made over a break.

Downloads
60
Likes
7
Rating
0
P
PrintablesAdrian Ga

Rancher 3dsets.com servo to the axle

Complete sets for the Rancher 4x4 model 3dsets.com for transferring the servo to the axle. The set includes two covers with servo mounting. V1 standard, V2 moved 2 mm forward (some shorter servos catch on the cap) Kompletny zestaw dla…

Downloads
60
Likes
8
Rating
0
P
PrintablesPavel Bureš

Stand for 3Dsets Rancher

Stojan pro Rancher 3Dsets

Downloads
59
Likes
14
Rating
0
P
PrintablesHJ_3D

Adaptateur piscine pour brancher aspirateur ou robot

Adaptateur avec taraudage pour piscine tubulaire habitat et jardin pour pouvoir brancher un aspirateur ou robot hydraulique sur la prise aspiration de la pompe…

Downloads
58
Likes
6
Rating
0
P
PrintablesBenny

3Dsets Jeep Rancher 4x4 cover for Tube Roof Light Bar

Cover for Tube Roof Light Bar - LED distance middle to middle -> 16,7mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Filament: Print With Smile PLA transparent Category: R/C Vehicles

Downloads
58
Likes
9
Rating
0

Roof holder Rancher

Roof holder for the front part of roof in Rancher from 3dsets. Use 4 screws M2x10 to the roof and 4 screws M2x6 which you take from the tube roof of Expedition set. If you want to use this holder you have to cut the sun shades to the half.

Downloads
56
Likes
16
Rating
5
P
Printablesbashmaster
Downloads
56
Likes
12
Rating
0
P
PrintablesJamesGames

Heavy Duty Track Mount for 3DSets Model 1: Rancher 4x4

The tack mounts on my Model 1: Rancher 4x4 kept breaking so I designed a slightly sturdier version. This sturdier version still allows full movement of the suspension. I only created and tested the largest size (approx. 19 mm from frame…

Downloads
56
Likes
17
Rating
0

Taillight Rancher

I modified taillight for Rancher to use the lights from Aliexpress. There is main (5mm), brake (5mm), return (5mm) and turn (3mm) light. https://www.aliexpress.com/item/1005002257228043.html?spm=a2g0o.9042311.0.0.27424c4d4OeVGu

Downloads
55
Likes
14
Rating
0
P
PrintablesSejnyM

3DSets Rancher - Improved reserve tyre mount

Non printed parts: 2x M3 nut and screw

Downloads
52
Likes
12
Rating
0
P
PrintablesDodoRC

BBS rims for 3d sets rancher

BBS rims for 3d sets rancher. maybe they are suitable for other models too tested and durable you will need 5x classic m2 screw

Downloads
46
Likes
7
Rating
5
P
PrintablesPlasmo.cz

Inner ring for wheel A Jeep Rancher Wagon 4x4 by 3Dsets.com

Inner ring for type A wheel for fixed tire position. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.24 Infill: 15 Filament: DevilDesign PLA Category: R/C Vehicles

Downloads
46
Likes
3
Rating
0
P
PrintablesSejnyM

3DSets Rancher - Cardan conversion to Traxxas

End yokes designed for Traxxas Driveshafts. On rear end is not necessary trim length. Tront cardan bust be cutted for proper length. Original Traxxas part: TRA5451X. Printed from Prusament PC-BLEND

Downloads
45
Likes
11
Rating
0
P
PrintablesMelty

Slime rancher's vacpack

You'll need some glue and patience to assemble the model togheter. The model is about 13cm long and 6cm wide. Printed it on a ender 3 but with the current printer it can probably look better than the photo I provided. Made this on onshape…

Downloads
41
Likes
5
Rating
5
P
PrintablesLittleBlue

Slime Rancher Newbuck

The currency from slime rancher

Downloads
41
Likes
7
Rating
0
P
PrintablesElg

3dsets Rancher switch holder

This is my version of the holder for QuicRun 16BL30 ESC switch. The 0 and 1 indicators are printed in white. Two 2x14 screws are required, installation is a bit tricky, because the screws holds the whole thing together.

Downloads
40
Likes
6
Rating
0
P
PrintablesJyri

3Dsets Rancher armrest lid mod for Hobbywing 16BL39 ESC

I printed with supports. Slide the switch into the holder, it is easier than to press it in. To remove slightly lift the end of the switch with pliers.

Downloads
38
Likes
4
Rating
0
P
PrintablesVojtěch Straka

Rancher offroad plastic wheel 4mm 3dsets

Nezbytné podpěry pod středem kola. Suitable for drifting, ideal for fun on ice. You can find other types of wheels and other models on my profile: https://www.printables.com/cs/@VojtechStraka_466782/models

Downloads
37
Likes
7
Rating
0
P
PrintablesMartin Kolář

Rotopax Gas Cans and mount for 3D Sets Rancher

This is one piece mount and Rotopax cans, use MMU/AMS to multilor it. Cup can be found in original model.

Downloads
36
Likes
12
Rating
0
P
Printablesmykkkailo

Slime Rancher lamp

This is not a finished project and it has nuances such as assembly difficulties. I will not be finalizing it, so I am posting the .step and .f3d files for your modifications. You can modify this to use a glass vase or cup, but I wanted to…

Downloads
31
Likes
14
Rating
0
P
PrintablesStarterPax

Slime Rancher 2 – Slimepedia (3D Printable STL)

Bring a piece of the Far, Far Range into the real world with this detailed Slimepedia from Slime Rancher 2! This 3D printable model is perfect for fans of the game who want a fun collectible, prop, or display piece for their gaming shelf.…

Downloads
31
Likes
1
Rating
0
P
Printableshartk1213

3Dsets Model 6 Rancher Roll Bar

Roll bar to go with the roll bar offered for the Model 1 from 3dsets you still need to purchase the roll bar addon from 3dsets if you havent yet

Downloads
27
Likes
10
Rating
0
P
Printablesdarthsharkie

3dsets Rancher Stand

This is a stand I designed from the Rancher's “centre of the chassis” STL file using Fusion 360. It negates the volume occupied by that STL to ensure a solid fit. This should be a trivial print, as there are no supports required, no fancy…

Downloads
26
Likes
4
Rating
0
P
PrintablesNate

3dsets Rancher FPV Bumper

This is a modified bumper for the 3dsets Model 1 Rancher 4x4 - https://3dsets.com/product/rancher-4x4/ It is designed to fit a Caddx Ant analog camera - https://caddxfpv.com/products/caddx-ant-analog-camera Wiring routing is similar to…

Downloads
24
Likes
13
Rating
0
P
PrintablesVojtěch Straka

Rancher offroad plastic wheel 3dsets

Necessary supports under the center of the wheel. Suitable for drifting, ideal for fun on ice. You can find other types of wheels and other models on my profile: https://www.printables.com/cs/@VojtechStraka_466782/models

Downloads
23
Likes
5
Rating
0
P
PrintablesElg

3dsets Rancher custom servo arm

Modified servo arm with ball joint for Rancher. Requires to have servo on axle modification installed on the Rancher. Shortened Drag Link is required (not included) - please see attached image. Requires M3x20 screw. Not tested in…

Downloads
22
Likes
7
Rating
0
P
PrintablesMartin Kolář

Rancher light reflector lens

non printed parts needed: Optical PMMA LED Lens Reflector on Ali (i recommend 60 degree) 1W/3W High power LED 20mm star pcb on Ali (1W is sufficient, I recommend warm white for older cars, looks much better) front parts of the fenders…

Downloads
20
Likes
14
Rating
0
P
PrintablesMarples

Hyper Slime from Slime Rancher 2

Slime rancher 2 is a very fun game to collect slimes and more. I made my own model of one of the obtainable slime.

Downloads
20
Likes
1
Rating
0
P
PrintablesFX

3Dsets Jeep Rancher 4x4 Light 适配DUALSKY 3530 无刷电机

原版电机为4孔螺丝固定,DUALSKY 3530为5孔比同规格电机略短一些。后面固定坐也不匹配。 我修改了原文件中的[Pulley 1 - Motor - B] [Motor Mount]这两个,直接替换掉即可使用。

Downloads
20
Likes
4
Rating
0
P
PrintablesLišák

Connection plate for MODERN BUMPER AND WINCH FOR 3D SETS LANDY and RANCHER

This part is a needed for Rancher 4x4 as the holes in the original end has different dimensions. The Bumper parts can be download there under this link…

Downloads
20
Likes
3
Rating
0
P
PrintablesCrowley

keychain honey slime. slime rancher

This model does not need any supports.

Downloads
19
Likes
5
Rating
0
P
Printablesthat guy makes

rancher style house

this cozy little home can be a great decoration for a train layout, or get you a 100% In a housing design class Print specifications: windows I used translucent PLA for the window part of the window color swap/mmu/ams/ace/paint reqired…

Downloads
18
Likes
5
Rating
0