381 models
This adapter adapts the Ryobi 5 inch One+ Random Orbit Sander (P411) dust collector output to the Ryobi 6 Gallon Wet/Dry One+ Vacuum (P770ID). It may very well work for other sanders and/or shop vacs but these are the ones I own and…
This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.
I think the sander came with an adapter but not sure where it is. This is designed to fit the m18 vacuum, so it's smaller than a normal shop vac. There's some tuning to make the vacuum nozzle offset from the sander port, so it'll take…
I remixed this random orbital sander wall mount so that it fits my corded 5 inch random orbital bosch sander. The mounting holes have also been changed, so that it can be mounted with only two screws into a single wall stud. ☕ Enjoying…
Customizeable Hexagon Wall Panel. Print as many as you like and arrange them together on the wall.
This is a wall-mount for orbital sanders with 150 mm sanding discs. I made it for the Menzer ETS 150, but it should work the same for Mirka Deros or similar sanders. One big benefit of this design is, that the force is on the top-side of…
Wall mount for DeWalt DCW210 20v random orbit sander
I designed this wall hanger to fit my Bosch 6'' random orbital sander Bosch GET75-6N. It is printed in two pieces to allow it to be easily printed on most 3d printers. With the screw holes being inline with each other this can be screwed…
Originally published here: Random polyhedron planters by tato_713 - Thingiverse This is a compilation of several polyhedron like planters, or vases, generated procedurally with MATLAB R2016a. They were generated using vectors from origin…
Nothing special
A few monsters, perfect for wargamers that are just getting started.
This customizable Random Decision Wheel uses an empty filament spool to create a drama - think of the big vertical wheel from the game show The Price Is Right, fused with a Magic 8 Ball and powered by recycling.…
I apologize for the print quality, I did this very fast just for demonstration. I didn't even level my bed. I have never seen anybody using filament springs but I believe it has a great potential for mechanical models. Try it out! Making…
Hi! This is a fast one! Ten crystals in a row!! Using customizer you can create random crystal gems useful for decoration, board games or as cat toy. Every customization generates 10 STL files with random crystals. Not seed dependant so…
Just some basic parts for a Tom Servo prop build.
This is an adapter that will allow you to connect a Black and Decker random orbit sander to a 1-¼ Ridgid shop vac hose. I modeled this to connect to my Black and Decker BDER0600 5 inch random orbit sander, but there's a good chance it…
This script creates an array of random buttons. You can define the number of buttons to create, and each button will have a different size, edge, design, etc. Print them in one go and use them for scrapbooking, button monsters, etc.…
This is a small printable adaptor allowing you to attach a Shop Vac to the Makita Random Orbital Sander. Designed for the 5" / 125mm 18v Makita Random Orbital Sander. 57mm vacuum head. Print upside down with no supports.
Hi! This is the second generator of Plastic reef series . You can create random octopus in two styles: 'organic' and 'mechanic' and populate your room with this weird creatures :) Every Customization generates 5 sightly random octopus.…
Wanted to mount my sander to the wall and created this module holder for it and the sanding discs. The shelf for the sander it self is a thicker version og the disc holder. This design was created by me, however the general shape was…
Just some of the 3D printed parts from our full body robotic Crow T Robot build in case anyone needed a spare part for their Crow puppet kit or if you wanted to get started building an actual robotic Crow. Caution, some parts need to be…
This looks more than a natural tree than its ancestor. It has as much randomness as possible: just enter the seed and your tree will grow. Category: Math Art
Random flow vortex generator for aquarium tanks. Easily push fits on to a 17mm straight outlet (e.g. Readsea Nano). The head snaps onto the connector. The position is held at your chosen angle using friction.
I can't mark it as a remix of a model from Thingiverse but this is a remix. Designed to fit #8 wood screws. Based on https://www.thingiverse.com/thing:5372438 by hobbid, the model fits the sander perfectly but I was a little unhappy with…
Introduction to Ornament.SCAD The SCAD file generates random ornament designs for your printer. Of course your printer may need tuning before printing the ornament. Save a back-up copy of the Ornament.SCAD file so you won’t have any…
Could fit to other DeWalt random orbit sanders and vacs.
I've completely re-evaluated the ball's trajectory. As a result, the Drop Inlet's launch speed has apparently increased, but the Randomizer Inlet's launch speed has seen a more significant improvement! Previous ver. of Drop Hole Inlet :…
I was not able to correctly connect Eheim 16/22 transparent hose to the Turbulent Flow Generator, so I created this as proper connector. Printed using black PETG 0.2 mm layer height Category: Pets
I made a few examples of what can you make with my blank patches. I remixed a few designs I found here and made a few myself. There is a photo of a few I already sewed onto my backpack a couple of weeks ago, and they are holding up great.…
You would assume this is unstable - but surprisingly even uneven (handmade) Cups have a stable stand as there are always 3 points to support it. When printed thin with translucent filament you also get a nice window tile. due to the small…
This is for 5 inch random orbital sanding discs. The idea is that they are able to stack and can be grabbed easily. “Top Cap” is intended to be used on the very top, while the “Base Plus” will connect from the bottom up. Scale up or down…
Tile to stimulate little feet of the kids :)
There are similar adapters already, but I decided to give it my own touch and designed it from scratch. This adapter will fit the 18V Makita DVC750LZ vacuum and the 18V Makita DBO180Z random orbit sander. The walls are 2mm thick. One side…
This adapter was designed to use a Ryobi Random Orbit Sander (model number PCL406B) with a Craftsman 16 Gal, 6.5 HP Wet/Dry Vac (model number CMXEVBE17595), though any vacuum that uses 2-1/2 inch hoses/accessories should work. I've also…
It's not based off of any real submarine.
When using a sander, I prefer to connect it to a shop vacuum to keep the dust in my shop under control. The collection bag provided with the Ridgid R2601 random orbit sander can't collect all the dust and a shop vac (equipped with a HEPA…
Random Character creation dice for use of NPC or even what the next character will be after an untimely horrific death are a specialty item. I was looking at picking up a set from a Canadian seller but they took long enough to get back to…
Random race creation dice for use of NPC or even what the next character will be after an untimely horrific death are a specialty item. I was looking at picking up a set from a Canadian seller but they took long enough to get back to me…
IT literally doesn't serve any other purpose other than design. DO NOT PRINT
Used on my bosch GEX 18V-125 at home and with a compressed air 150mm 3m one at work I designed it to print as quickly as possible and use a minimal amount of material.
This is a remix of a file from Thingiverse - I've adjusted the adapter so it fits on the outlet nozzle of a Red Sea Reefer S-850 which has a 23mm outside diameter. The inside diameter of my adapter is 23mm so it's a good friction fit. The…
Since I'm switching my tools completely to osVAC, this was missing. Thanks to the osVAC neo library I created an adapter for the Bosch GEX 18V-125. It fits very well, but I might make it slightly more tight. osVAC System:…
Python script to generate a random 2D maze of any size using Eller's Algorithm. The output is an OpenSCAD array definition with blanks and walls represented as 0 and 1 respectively. For more information on Eller's Algorithm see here:…
A series of random noise lampshades. Made to fit on a table lamp base, but could also fit on a ceiling hanging light fitting. Use the Python script to change parameters. Running it will generate a scad file which you can render with…
This is an adapter for the Makita 5" Random Orbit Sander
For creating a random blotchy pattern as part of a preshading process that aims to break the visual uniformity of a single-color surface. Featured in the new Prusa Academy airbrushing course .
Festool CLEANTEC hose adapter for 3M Xtract Random Orbital Sander. Threads right into the sander (reverse thread) and Festool hose stays snugly in place.
This is a hose adapter to go from a Bosch ROS20VSC 5" random orbit sander to a 2.5" dust collection hose. I smoothed out the transition of an older design I printed a while back, so I know the mating dimensions are good (because I didn't…
Originally published here: Random generated cube planter by tato_713 - Thingiverse I wanted to do a planter decorated with random squares. I've later realized that it resembles the giant cube in Fortnite, named "Kevin". I used MATLAB…
This is a collection of random low z resolution 3d generated terrains. It is the result of a personnal project to use Rhino 3D with Grasshopper to generate custom terrains and have them sliced in those ways. There are several types of…
Uhhh just try to put it together I think ther is some random parts in there so have fun with it
This is a little spinner I designed. It is fully 3D printable. There are two base pieces, two washers, and then you can print a number wheel in order to select a “random” number from 1-n. I designed the model so you can take it apart…
Recursion did not work in the customizer a few Month back. I heard it should work now! This is a test to try out the possibility of recursion in the Customizer. It should now support it, so lets find out. PS: This is basicly the same…
Hi! This one may be the first of a generative series based on reef structures (corals, anemones, etc..). I called 'Plastic reef' and it's just a lot of decorative stuff from some OpenScad experiments. I don't know how many generators will…
so for these dice they are equal chance on each die but it means there is 3 neutral's between the two dice so I may yet, other wise these random alignment dice do the job just fine.
Stackable Random Orbit Sander Disc Holder / Storage This is a simple, stackable, modular, random orbit sander disc storage tray / organiser with notches every 45 degrees for easy alignment. Fits 5" inch or 125mm round sanding discs in a…
Ridgid NXT 2.5" (nominal) vacuum hose to Bauer/Harbor Freight corded Random Orbital Sander dust port adapter. Print Settings Rafts: No Supports: No **Resolution:** .2mm Infill: 15% gyroid **Filament:** Geeetech TPU 95A Black Notes:…
Random circle pattern ceramic roller tool for creating random circles. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
Connects M18 Random Orbit Sander to 1.75in Vacuum hose for dust collection.
I wanted to create a model that would test the kinds of overhangs and supports that I have been having issues with.
Random triangle pattern ceramic roller tool for creating random triangle patterns. Check out my other models here 👀 See my other Ceramic Work Tools here 👀 Hope you enjoy and happy printing 😎
Fans of American Football commonly play “Squares” for the Super Bowl. Many offices and groups enjoy a little wager on the game to give everyone something to root for. I've attached game sheets so you can start up a game with your family…
Improve your orbital sander's dust extraction by precisely aligning holes in sandpaper sheets. Helps stack discs in a very neat and organized way. Printing Rigid filament, 10%+ infill. Layer height doesn't matter. No supports needed, but…
Pretty strait up.
A quick adapter I made for my battery operated makita random orbital hand sander to connect it to my Shop vac vacuum. Measurements are 27mm on one end and 36mm on the other. Enjoy !
3 STLs included, one with the vertical channel and 2 without. Vertical channel was a legacy design for filming time-lapses.
random high hex acoustic wall panel there are 20 random high
I like stencils. The detail you can get from these stencils is great! Mario Mushroom, Alien Abduct, Google Dino, Cool Zebra, Among Us, Hands Up, Cat Scratching. This was a request from a friend, and it turned out great! I had to share.…
Update 7-18-2026 : Added a larger version to accept more cards as more sets are being released. Its about 1/3 more card storage (Widened the inner are from 20mm to 30mm). Update 2-6-2025 : I test printed it over night and I'm pleased with…
Have you ever wanted something special? Well now, with this pack, you can make your nerf gun special! What do you think?
This uses the DDD Printable Wall Control System ( github ) to mount the sander. I have the Bosch 5" sander, but it seems like the hook & loop sanding pads are fairly standard which is what the mount is using. Use a good percentage infill…
This is a randomiser for the Three Path dice tower. It also includes a new top level that has a single path that is supposed to sit on the randomiser. I pretty much finished this before @Hsus did their excellent version, but thought that…
To print the included STLs you need the following settings: * 0.4mm line width * 110% flow rate * Top/bottom thickness of 0.6mm * Spiralize outer contour enabled * Smooth Spiralize Contour disabled Explanation: * The provided models will…
This is a pedestal that I made for a chess piece that I am working on. Its a simple and funky design that really you can put anything on. It prints relatively fast on a med setting and can is best printed with support material. Print…
General: See video on Youtube: Random League (real life Rocket League) (youtube.com) All parts can be printed on 225x225 bed size Cars used are “turbo racing 1/76” rc cars. (Not the drift type, but the "speed" ones.) Type C71, C72, C73,…
Holder top be mounted to “ceiling” or vertical wall to store you sander. can be used with sand disk on sander.
First model I've ever posted! Be kind I'm kinda new. I can't stand fighting the hook-n-loop when aligning the sawdust holes on my sander. I saw someone making a jig with dowels and I figured it'd be an easy thing to design and print. It…
These are Potion Randomizer Tokens for Potion Explosion! I always found randomizing the potions for use during setup was messy and not the easiest thing to do. So I created tokens with the symbol of each potion on them. Draw six during…
Customized version of http://www.thingiverse.com/thing:128686 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=128686 Instructions Using the following options: seed = 42 number_of_levels = 6 Category: Math…
It prints easily in the upright position, without supports. I printed mine in ABS because I need to get rid of it, but PETG or PLA would also work.
Fitting designed for Makita BO5041 5" Random Orbital Sander, but should work on any ROS with an output port OD of 7/8". You will also need a nylon lock nut and hardware to clamp the fitting to the tool. Recommend adding some thin craft…
Just a random mushroom I designed, feel free to edit it or do whatever you want with it.
This is a wall support for an Random Orbital Sander Support. I glued it with epoxy to my wooden wall. You can remix it to add screw support, or ask me if you need it. Size available: 125mm - 150mm - 180mm Medium (10mm thickness) and Heavy…
This contraption will automatically draw a coin capsule token and shuffle the remaining in a single crank of the handle. It was originally designed as a chaos bag replacement in Arkham Horror LCG but can be used anywhere you need to draw…
---READ ALL OF THIS--- Use black PETG I made a quick gcode to print. It should print fine but if you choose to slice it yourself, here are the instructions from prusa: "RECOMMENDED PRINT SETTINGS: 0.2 mm layer height, infill 20% GRID and…
I recently played Dice Throne and purchased the Season 2 battle chest and also got the promo cards along with it. If you've seen the Battle Chest, you know how nicely everything fits in the box and the excellent organizational design. The…
Click on the Customizer button in this page to create your own random tile. Category: Math Art
A collection of test prints I made in Autocad, they contain overhangs, arcs and sketchy figures
My orbital sander came in a cardboard box, which didn't last long. I also wanted to store my sanding paper and various other accessories together with the sander, so I created this model. It has both Czech and English version for the text…
Various shells that I thought of while making the Sniper barrel. Short rival and slugs are about the length of 40mm. Regular slug shells require tubing listed in the name of the file. Can't test these as I don't have any blasters that can…
Album cover art for daft punks random access memories Please DM me if you would like the hfp files for hueforge to edit Project: RANDOM ACCESS MEMORIES HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of…
Adapter to connect a Bosch Professional vacuum cleaner to a Makita random orbital sander.
This creates a grassy hillock that can be used as a stand for other projects, a holder for small objects or just a piece of decor. The position, height and orientation of each blade of grass is randomised so if you create your own knoll…
Three coins from an episode of Star Trek: Voyager (Season 4, Episode 10: Random Thoughts). As per the prop site that documented these parts : A collection of three metal pieces of Alien currency featured in the Star Trek: Voyager episode…
These are designed to use 6mm x 2mm disc magnets. They should be able to be press fit without the need for glue. However, if it is too tight I would recommend using a 15/64 or 1/4 in drill bit to widen out the holes a little bit. Here is…
A set of tokens for Cthulhu: Death May Die board game that can be used to randomly pick an Elder One for a scenario/game. I have included all the Elder Ones from already existing Season 1, Season 3 and Season 4 sets (there is no Elder One…
