Search results: rax

Sort order

1,471 models

P
PrintablesRockChalkAZ

Gravitrax Compatible Spacer (various heights) No Support Needed

This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
1,367
Likes
119
Rating
4.92
P
Printableswill rollup

wave rail for gravitrax

this amazingly fun addon for gravitrax adds a fun new twist to your existing tracks. it suddenly drops and then comes right back up, it incredibly satisfying & smooth!

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant

Downloads
1,340
Likes
180
Rating
5
P
PrintablesDusBus

GraviTrax Junior compatible spacer

Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
791
Likes
59
Rating
4.8
P
PrintablesDusBus

GraviTrax Junior compatible corner

Transform GraviTrax Junior with this compatible 3D-printed corner piece! Take marbles on a thrilling ride with twists and turns. Also contains a hole so you can add your favorite accessories. Will need some support and a little bit of…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant

Downloads
455
Likes
50
Rating
4.67
P
PrintablesDanielAlex

Star Wars Ataraxia

The Ataraxia “the Ataraxia, the one large starship under direct control of the Jedi Order. It was a beautiful ship, designed to subtly evoke the Order’s symbol with its hull and sweeping, curved wings accented in white and gold. While the…

Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant

Downloads
429
Likes
95
Rating
0
P
PrintablesBINGOBRICKS

GRAVITRAX - One turn switch (Einwegweiche)

The normal Gravitrax switch steers the ball alternately left and right. This part only directs the ball once to the left (or right) and then all other balls in the other direction. This is useful, for example, to steer a ball onto an…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
39
Rating
4.67
P
PrintablesDusBus

GraviTrax compatible straight

Elevate your GraviTrax Junior vibes with this compatible 3D-printed straight! Will require supports and some minor cleanup work. Disclaimer: Only works with GraviTrax Junior!

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
204
Likes
19
Rating
5
P
PrintablesThunderTronH123

Digitrax Throttle Holder (DT600, DT500, UT4)

Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
10
Rating
5
P
PrintablesLsGeorge

HEXA kostka propadlo výstup (Gravitrax)

Doplňková kostka na vytvoření propadla vnitřkem věže

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
182
Likes
21
Rating
4.75
P
Printablesbertwest

Carrera Strax Track

This is my present version of the Carrera Strax track part. Status: I'm still not satisfied with this. The printed parts are not as easy to connect to each other and the original ones than expected. And the resulting track is not as…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
11
Rating
0
P
PrintablesMichal K

Maxtrax Roof Rack / car body Holder for 3D Sets Bamboo

Works with: Maxtrax board from daver18qc . Note: The board is 1/8 (not 1/10 as described), don't resize it! Mount it on the: roof rack with 4mm diameter (print part A+B) sideways on the car body just drill the holes on the body of the car…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
150
Likes
50
Rating
5
P
PrintablesErikSi

059 Vorsicht: Spielende Zahlen! - Gravitation with Gravitrax

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
24
Rating
4.75
P
PrintablesNigeke

GRAVITRAX Stone with triple small corners and height stone with pass throughs

GRAVITRAX ; Ever wondered why they only do small and medium corners combined? You can do triple small corners now too. Is that Column in the way too? Let’s pass through it then. Just print your own! GRAVITRAX Stone with triple small…

Print approx. €2.72–€3.33 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
21
Rating
5
P
PrintablesSlawoFu

Ultimate Traxxas TQi controller GoPro mount

If you need to mount a GoPro (or any other camera) on your Traxxas TQi controller get that model and print it out! The camera mount is at 30° angle to let you navigate your RC model freely. I've tested it with GoPro 11 and 11 mini - at…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
103
Likes
21
Rating
5
P
PrintablesPetr O

REGIOJET - TRAXX - Locomotive

Model of REGIOJET (TRAXX) electric locomotive for children. Nice to print with metal colour filament deck & non-shiny underframe. Gcode with ideal print options included.

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant

Downloads
74
Likes
9
Rating
5
P
PrintablesSilverBullet126

Hobbywing Max10 SCT Mount for Traxxas Stampede 4x4

A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
73
Likes
4
Rating
5
P
PrintablesDiana Šinková

GraviTrax Junior Startblock CROWN

Alternative to starter GRAVITRAX JUNIOR

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
10
Rating
0
P
PrintablesFlexi-Maker

Gravitrax Glas Ersatzteil

Das Teil passt in die Gravitrax pro Erweiterung. Kompatibel mit Gravitrax. Kann man festkleben damit es stabiler ist.

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
10
Rating
0
P
PrintablesJ. Kaiser

Flugcomputer (Skytraxx) Beinhalter

Ich habe mir Beingurte genäht, um meinen Flugcomputer auch mit meiner Hike&Fly-Ausrüstung komfortabel sehen zu können. Das von Skytraxx originale Teil war mir zu teuer und erschien mir zu wackelig, also habe ich eine eigene Interpretation…

Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
PrintablesMatthijz98

Gravitrax spacers in many sizes

These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…

Downloads
5,216
Likes
453
Rating
4.87
P
PrintablesJDO solutions

Marble track - Motorized Lift 2021 version (v4) - stand-alone height adjustable Gravitrax compatible!

Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…

Downloads
3,562
Likes
470
Rating
4.92
P
PrintablesJDO solutions

Marble track - rails (Gravitrax compatible)

I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…

Downloads
3,300
Likes
308
Rating
4.97
P
PrintablesEmiliano M.

SYRAX DRAGON

Syrax Dragon

Downloads
2,949
Likes
545
Rating
5
P
Printablesdeepblue4200

Gravitrax spacers 1 to 7,10,14,15 tiles high

These spacers are easy to print do not require supports or any glue. They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL. Since they fit tight with themselves and original tiles I wanted to have some smaller ones as…

Downloads
2,838
Likes
240
Rating
4.85
P
Printablesdaver18qc

1/10 Scale MaxTrax MKII Traction Board

These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high. Comments and suggestions are welcome ! * UPDATE : I uploaded V2 which has the little traction losanges 0.28mm higher for…

Downloads
2,671
Likes
348
Rating
4.96
P
PrintablesMatthijz98

21 different Gravitrax tiles

All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…

Downloads
2,643
Likes
325
Rating
4.97
P
PrintablesJDO solutions

Marble track - basic tile v2 (Gravitrax compatible)

update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…

Downloads
2,608
Likes
187
Rating
4.91
P
Printablescrudo

Gravitrax bridge

Gravitrax compatible bridge for multilayer tracks without supports

Downloads
2,552
Likes
290
Rating
4.94
P
PrintablesJDO solutions

Marble track - 16 different tile insets (gravitrax compatible by using my 6 exits basic tile)

16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…

Downloads
2,241
Likes
289
Rating
4.94
P
PrintablesGunnar Lachmann

Gravitrax Corkscrew

I divided it into two parts for better printing, if you have trouble with the overhangs. You'll need a lot of power to get through: https://www.thingiverse.com/thing:4800097 helps, normal gauss won't work Video:…

Downloads
2,153
Likes
269
Rating
4.87
P
PrintablesDennis M

Eiffel Tower Gravitrax scene

Scenic tile! Add some travel destinations for your Gravitrax marbles with the addition of the Eiffel Tower pass through tile. My wife did one setup where she put this tile in the middle of a bunch of wavy slow rails and she called it the…

Downloads
1,874
Likes
204
Rating
4.88
P
PrintablesBenjamin

GRAVITRAX tower with marble track channel. Gravitrax kompatibel Turm mit Ball Kanal. Gravitrax Tunnel

This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:

Downloads
1,619
Likes
227
Rating
4.71
P
PrintablesRockChalkAZ

Gravitrax Compatible Straight Rails

These are straight rails for use with Gravitrax Print instructions Category: Mechanical Toys Summary These are straight rails for use with Gravitrax

Downloads
1,588
Likes
131
Rating
4.95
P
PrintablesJDO solutions

Marble track - hammer (Gravitrax compatible when using my basic tile)

Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…

Downloads
1,562
Likes
168
Rating
4.75
P
PrintablesSeppel

GraviTrax Junior 5 Fach Höhenstein / high stone

Fünf auf einen Streich… Mit Stützstrucktur (nur für den Absatz unten) Standardmodell - ca. 33g (einfacher Druck) Lightmodell - ca. 23g (relativ großer Überhang, hat bei mir ohne zusätzliche Stützstruktur funktioniert)

Downloads
1,520
Likes
92
Rating
4.93

Traxxas TRX4 Chain Drive, Track Drive, All-Terrain Traxx

I have developed a chain drive for Traxxas TRX4 RC cars, which can be almost completely 3D printed. All you need are a few ball bearings and M3 screws. The drive train is fully functional and has already been tested extensively (in snow…

Downloads
1,519
Likes
594
Rating
5
P
PrintablesSwan_Kikaku

Curved Rails for Gravitrax

While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own. I also made…

Downloads
1,514
Likes
191
Rating
4.92
P
PrintablesJoza

Defender 1/18 Recovery boards for Traxxas TRX-4M (TRX4M)

1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…

Downloads
1,476
Likes
135
Rating
4.5
P
PrintablesMax Mühlstädt

Gravitrax Höhenstein/ Gravitrax Spacer

Gravitrax Höhenstein. Passt mit originalen Zusammen und hält stabil auf der Platte. Gedruckt aus PETG. Der Höhenstein sollte mit der eigentlichen Oberseite auf dem Druckbett gedruckt werden. Support auf dem Druckbett sollte aktiviert…

Downloads
1,439
Likes
100
Rating
5
P
PrintablesBas

Gravitrax high speed curve

My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…

Downloads
1,392
Likes
152
Rating
4.84
P
PrintablesSwan_Kikaku

Serene Funnel for Gravitrax (25/1/28 v1.1 uploaded)

A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…

Downloads
1,369
Likes
151
Rating
4.94
P
Printablesuhltimate

Magnetic Kickback - Reverse Gauss Cannon - Gravitrax Extension

This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…

Downloads
1,313
Likes
303
Rating
4.92
P
PrintablesJDO solutions

Marble track - horizontal loop (gravitrax compatible by using my 6 exits basic tile)

A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…

Downloads
1,293
Likes
161
Rating
5
P
PrintablesMatInCat

Snake rail for Gravitrax

A fun rail for gravitrax. The rail is a larger wobble rail. Designed in OnShape.

Downloads
1,281
Likes
126
Rating
4.67
P
PrintablesMatthijz98

Gravitrax brige plates

These bridges give some new possibilities and can help save some spacers. Al files can be printed without any supports

Downloads
1,257
Likes
151
Rating
4.92
P
PrintablesPokot

Gravitrax hexagonal plate

I first designed the plate as one piece based on the original cardboard and then “cut” it into 4 different pieces in order to print it. Use the 4 files gravitrax_hexa_plate_top_left, gravitrax_hexa_plate_top_right,…

Downloads
1,196
Likes
124
Rating
4.57
P
Printablesthomas

Marbletrack - Spiral (Gravitrax compatible)

The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…

Downloads
1,189
Likes
187
Rating
4.8
P
PrintablesPrint-3D

Gravitrax-compatible height unit

An accesory to lift your Gravitrax-rails. Use the enclosed F3D.-File to scale the height to your needs. Contains files for: 1HU - original height 2HU 3HU 4HU 5HU 10HU Print instructions Print in PLA. No support needed.

Downloads
1,168
Likes
69
Rating
5
P
Printablesuhltimate

Powerful Magnetic Marble Cannon (Easy Reload) - Gravitrax Extension

Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…

Downloads
1,073
Likes
182
Rating
4.96
P
PrintablesTom

Gravitrax, Spacer, 10mm

I had two design goals. First a fast print. And second in one piece without support. For the last goal the inner plate was skipped. AFAIK this surface isn't necessary in any condition. The spacer is still stiff. Even more, now a marble…

Downloads
1,057
Likes
73
Rating
4.93
P
PrintablesBINGOBRICKS

GRAVITRAX - Catcher for the catapult

This is a catcher for your Gravitrax catapult. Use it together with the original Gravitrax base stone. The special thing about this catcher is that you can use the inset to choose which exit the ball should take. Tip: Glue the funnel into…

Downloads
1,051
Likes
128
Rating
4.94
P
PrintablesStefan

Tunnel for Gravitrax V2

The stones are as high as 2,5 height stones. There are two parts on every design. Print the inlay up side down and glue them together. For the STLs use the “split to object” function in Prusaslicer to split the parts. Update 2022-04: I…

Downloads
1,048
Likes
115
Rating
4.75
P
PrintablesCelta

LAX RAX game shelf insert DIY

Boardgame shelf. Two versions: With cover edge - Hides the sticky pad on the back Without cover edge - Prints better ↳ The model with a cover edge from behind, Red for stick pad representation Each piece has slots to help to aline the…

Downloads
1,040
Likes
187
Rating
4.5
P
PrintablesORM

Gravitrax base tile

This is my version of the Gravitrax compatible baseplate with 6 exits and interchangeable insets as well as corner holes for height blocks - all for the construction of flexible tracks. To be able to use this building block, you need to…

Downloads
1,017
Likes
101
Rating
4.94
P
PrintablesEndersen

Trichter - Gravitrax Kompatibel

Remixed from Thingiverse User thomasdr if you like my model please leave a like there

Downloads
1,002
Likes
121
Rating
4.86
P
PrintablesFlorian

NS Traxx

NS traxx model

Downloads
1,002
Likes
30
Rating
0
P
Printablesoxygene

High speed curve (Gravitrax compatible)

To print in two colors like in the images, set up your slicer to change filament at approx. 10.5 mm. For best results, place a dummy cube next to the object and make sure that it is printed first on every layer so that the nozzle is clean…

Downloads
985
Likes
144
Rating
4.95
P
PrintablesChriz

Stacker for Gravitrax rails

Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!

Downloads
980
Likes
180
Rating
4.92
P
PrintablesJDO solutions

Marble track - motorized lift - v3 - stand-alone height adjustable Gravitrax compatible!

——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…

Downloads
974
Likes
143
Rating
5
P
PrintablesJoza

Bumper shackle for Traxxas TRX-4M (TRX4M)

A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…

Downloads
972
Likes
95
Rating
5
P
PrintablesEndersen

Gravitrax Spacer 50-100mm

Meine 140mm Spacer findet ihr hier: https://www.printables.com/de/model/17152-spacer-140mm-gravitrax

Downloads
962
Likes
113
Rating
5
P
PrintablesFanofgenetics

All basic GraviTrax Junior pieces (no support)

UPDATE: The reported issue with the bridge has been solved. Additionally, you can now downland both right to left and left-to right orientations of the bridge. This collection of GraviTrax Junior-compatible tiles contains replacements for…

Downloads
940
Likes
85
Rating
4.67
P
PrintablesClemi

Extendable rail marble track - gravitrax compatible

An extendable track for your marble run compatible with Gravitrax. Depending on the height, the original rails were always a little too short. With this track you can adjust the length variably. Print instructions: You can print it…

Downloads
935
Likes
142
Rating
4.89
P
PrintablesEndersen

Spacer 140mm - Gravitrax

140mm Spacer für Gravitrax Hier findest du noch andere größen https://www.printables.com/de/model/511208-gravitrax-spacer-50-100mm if you like my model please leave a like there

Downloads
931
Likes
112
Rating
4.6
P
PrintablesDennis M

Statue of Liberty Gravitrax scene

UPDATE I'm working on printing this and I think it might be a little small. The printer is having some trouble with the statue's details. I'm going to try a slightly larger model and see how it works and I'll update the files here soon.…

Downloads
928
Likes
91
Rating
4
P
PrintablesJoza

Defender 1 inch RC wheels for Traxxas TRX-4M (TRX4M)

Wheels for the Traxxass TRX-4M Defender. All fit the original rubber and have the same offset as stock by default. Alternate versions with +X push the wheel out by Xmm, the wheel sits further out. -X brings the wheel closer to the body by…

Downloads
893
Likes
92
Rating
4.8
P
PrintablesJDO solutions

Marble track - elevation system (gravitrax compatible)

The elevation system to use with the basic tile to create different levels in your marble track. The sticks fit into the holes of the basic tiles and can be fitted either in; the ground plate, another basic tile or the spacer plate. The…

Downloads
885
Likes
92
Rating
4.88
P
PrintablesDimension Zero

GraviTrax Junior Raiser (1-5cm)

These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs

Downloads
866
Likes
62
Rating
4.8
P
PrintablesSeppel

GraviTrax Junior Brücke / Bridge

Durch diese Brücke spart man sich nicht nur viele Höhensteinen, sondern hier können neue Ebenen geschaffen werden. Die Mitte ist zwei Steine hoch. Sehr einfacher und schneller Druck. Die Drei Steine mit der großen flachen Fläche mit…

Downloads
841
Likes
75
Rating
5
P
PrintablesORM

Gravitrax insets

This is a set of Gravitrax compatible 'standard' inserts. More of my models Click here if you are interested in seeing more of my models for Gravitrax Feedback is always a good thing. To encourage me or other designers to make more…

Downloads
827
Likes
110
Rating
5
P
PrintablesORM

Gravitrax pillars

One of the cornerstones of the Gravitrax system is building at height. These columns are a flexible way to build the marble tracks in an efficient way. The advantage is that the columns together with the base plate are flexible and allow…

Downloads
804
Likes
118
Rating
5
P
PrintablesVenoe Creations

Draxlotl Articulated

Draxlotl is its name, its a hybrid between a dragon and a axlotl, it was made with a mindset of something cute, various versions if you check my other files, they are made with a loving mindset, with my boys in mind, one isnt here…

Downloads
799
Likes
184
Rating
5
P
PrintablesMatthijz98

Gravitrax randomizers 2/3/6 ways

Not fully tested yet but wanted to share anyway. The goal of the design was to randomize the way the marbels are coming out.

Downloads
791
Likes
137
Rating
5
P
PrintablesDennis M

Big Ben Gravitrax scene

Continue your Gravitrax marble tour around the world by visiting London and seeing Big Ben! I'm enjoying adding some scenery to our marble layouts and will be doing a bunch more. Enjoy! This is a remix of these models:…

Downloads
789
Likes
116
Rating
5
P
PrintablesJoza

Defender Light guards for Traxxas TRX-4M (TRX4M)

Front light guard for my Traxxas TRX-4M Defender. I printed mine in resin and glued them on. Print some spares as the thin tubes might get broken in print (0.5mm in diameter). I printed 4 at a time and one guard had one bar broken.…

Downloads
780
Likes
84
Rating
0
P
PrintablesRockChalkAZ

Gravitrax Compatible Wiggle Rail

This is a high quality curving rail compatible with the Gravitrax brand marble run. This is designed to be easy and reliable to print with minimal post processing. There is a single layer of "support" built into the model to ensure that…

Downloads
779
Likes
100
Rating
4.83
P
Printablesoxygene

S-Curve (Gravitrax compatible, easy print)

S-Curve compatible with Gravitrax. Easy to print , needs only support where the hooks are (see image), all other overhangs are 45 degrees at most. Maybe you can even turn off support at all if you print slow enough and your…

Downloads
763
Likes
108
Rating
4.91
P
PrintablesFanofgenetics

GraviTrax Junior compatible Tunel

UPDATE: now also includes tunnel with a slope With this model, you can print a tunnel compatible with the GraviTrax Junior and extend your marble run building options. This model can be printed without any support and assembled without…

Downloads
747
Likes
61
Rating
5
P
PrintablesJDO solutions

Marble track - lane switch (Gravitrax compatible when using my 6 exit basic tile)

This is a lane switcher which causes half of the balls running through the marble track to go left and the other half will travel right. It consists of to parts which can be clicked together to prevent them to be separated when storing…

Downloads
746
Likes
83
Rating
4.75
P
PrintablesDennis M

Leaning Tower of Pisa Gravitrax scene

Presenting the leaning tower of Pisa in a Gravitrax tile to continue the scenic tour around Europe. Have your marbles enjoy the views while using gravity to follow your pre-determined paths along the way! Printed with two different…

Downloads
746
Likes
101
Rating
4.86
P
PrintablesBINGOBRICKS

GRAVITRAX - Seesaw / Wippe

This is a seesaw for your GRAVITRAX marble run system. The special thing about this seesaw is that you can use it with 2, 3 or 4 balls. Use the dividers to keep the desired number of balls in the seesaw. Remember that there must be at…

Downloads
740
Likes
120
Rating
4.45
P
PrintablesRockChalkAZ

Gravitrax Compatible Tile 1

An improved tile compatible with the Gravitrax brand marble run. This tile consists of a single straight and two sharp turns. No supports are required and the design incorporates a small chamfer on the bottom that nearly eliminates the…

Downloads
738
Likes
78
Rating
4.9
P
PrintablesFlexi-Maker

Gravitrax seesaw

Kompatible Gravitrax Wippe Kleine Feinarbeiten durch schleifen notwendig.

Downloads
733
Likes
129
Rating
4.2
P
PrintablesLCruz3D

Airless Tyre for Traxxas E-Revo VXL (Dual Extrusion)

Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible…

Downloads
724
Likes
80
Rating
5
P
Printableshebbet

Gravitrax Tower Gravitrax Turm

A tower for Gravitrax printed in PLA. Support not needed

Downloads
719
Likes
100
Rating
4.75
P
PrintablesCarson Raymond

Traxxas TRX4m snow plow

Remixed from a scx24 snowplow. Replaces front bumper. Body does not clip in unless someone wants to remix it. Requires 2 m2x6 screws and a paperclip.

Downloads
716
Likes
125
Rating
5
P
PrintablesDom360

Gravitrax Junior - Base Plate/Foundation

v4 foundation is confirmed compatible with OEM baseplates. This foundation piece resolves a number of issues identified with other foundation pieces I've seen on this site, mainly: tile spacing, proper hex shape, compatibility with OEM…

Downloads
713
Likes
59
Rating
5
P
PrintablesEndersen

5° Spacer - Gravitrax

if you like my model please leave a like there

Downloads
689
Likes
113
Rating
4.71
P
PrintablesJoH

Organizer for Gravitrax elements

The organizer is a simple plate with 8x3 Slots for Gravitrax elements, and can store up to 24 elements. Even most special elements fit, although they will block other slots. Freecad file for easy modification included. I printed with 2…

Downloads
672
Likes
128
Rating
5
P
PrintablesORM

Gravitrax tilted spacer blocks

Here are two different spacers with 9.5° and 4.75° inclination for Gravitrax marble tracks. For the 9.5° sloped spacer block, the top track entry is 10mm higher than the bottom track entry. For the second spacer block with 4.75°…

Downloads
669
Likes
70
Rating
4.64
P
PrintablesDom360

Gravitrax Junior - Curved Slope

See https://www.printables.com/@Dom360/collections/1929103 for more gravitrax junior pieces Update: updated models to not catch the marble if its going too slow

Downloads
658
Likes
44
Rating
5
P
PrintablesHonzal

Gravitrax Ballista-pipe

materiál PLA tryska 0,4 mm vrstvy 0,20 mm počet kusů naznačen v názvu souboru šroub M8x8 + matka 2x šroub M3x18 do otvorů 1,8mm možno zakotvit filament jako nárazník

Downloads
640
Likes
127
Rating
4.6
P
PrintablesFroballer12

Stand for Traxxas Trx4M

This is a stand for the Traxxas Trx4m crawlers. It sits on the front and rear links of the vehicle. All parts are posted in the orientation of how they should be printed. Roughly 1hr 45min to print dependant on settings. 4 pieces then…

Downloads
634
Likes
102
Rating
4.71
P
PrintablesJoza

Traxxas TRX-4M Drive hex +1.8mm (TRX4M)

7mm long drive hex for the Traxxas TRX-4M Defender. I did not like how the axle thread is vissible with the stock hex drives (just asking to be damaged). This one is just long enough to have the nut flush with the end of the thread while…

Downloads
633
Likes
57
Rating
3
P

12mm Hex Wheel Hubs for Traxxas

12mm Hex Wheel Hubs for 5mm axles. Work on 2WD and 4WD vehicles. 12mm hex in various widths from 4mm to 12mm. Perfect for adjusting fit when using alternative tires and bodies. Category: R/C Vehicles

Downloads
632
Likes
48
Rating
5
P
PrintablesJDO solutions

Marble track - collectors (gravitrax compatible by using my 6 exits basic tile)

2 collectors which can be used in my basic tile to create new marble tracks. One is the drop collector, which catches the ball from a higher level, redirecting it to a rails to continue it's journey. The other is the endpoint of a marble…

Downloads
630
Likes
73
Rating
5
P
PrintablesJDO solutions

marble track - drop tube (gravitrax compatible by using my 6 exits basic tile)

This drop tube collects the balls and guides them down through the tube. The exit of the tube is compatible with the marble rails (see my other designs). Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is…

Downloads
621
Likes
58
Rating
5
P
PrintablesStijn Geerdink

Manual lift Gravitrax

Every gravitrax lift is motorized but not this one. That is very handy, no cables and motors, but just with your hand. You can raise your marbles to different heights. !! Now With Knob !!

Downloads
610
Likes
70
Rating
4.6
P
PrintablesTheAim4074

Full functional RC Boat made of Traxxas Blast elements

Hi, I just finished the rework of some kind of sump boat which I designed for my son. It just started with a simple idea of having our Traxxas Blast boat modified a little bit but it ended with 26 parts for the boat itself, 9 parts for a…

Downloads
603
Likes
157
Rating
0
P
PrintablesJacyk
Downloads
603
Likes
76
Rating
5