1/10 scale recovery boards / vyprošťovací desky (vafle)
Staré dobré vyprošťovací desky (vafle) 40x125mm .
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
- Downloads
- 29
- Likes
- 7
- Rating
- 0
Counting matching models…
Staré dobré vyprošťovací desky (vafle) 40x125mm .
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
1/18 scale version of the original 1/10 by MrStolarsky. Pins were re-aligned and the whole board was made stackable. I test printed mine in resin and they came out awesome. I designed hangers for the Traxxas TRX-4M Defender, to hang a…
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
🆕 Available on Etsy, from me, with free shipping These are 1:10 scale recovery boards for RC crawlers and other toys. I really made these for a fridge magnet but folks at Etsy loved it for the detail. I am sure the community here on…
The Multi-Mission Recovery System (MMRS) is a powerful vehicle designed to retrieve and repair disabled military vehicles in challenging environments. It boasts a 360-degree rotating boom with a 41-foot reach and impressive lifting…
Your SATA connector broke of and you are having a bad day? This part helped me and many others not just recover data but keep using a drive. I did not even glue it in but just used it as a wedge so the metal strips make good contact.…
This is a 180mm long model of the Bombi that features in many of the Matt's Off-Road Recovery videos on YouTube. This radio controlled model is driven by four N20 motors and uses easy to obtain parts for the ESC etc. It was designed to be…
Freight Ten Recovery Vehicle as inspired by my four “Mongruxx” Novels. In love and war, both machinery and people break down. Having a recovery vehicle in your armoured column doesn't just make sense. It's criminal if you don't! Recover…
This is the Mongruxx “Attack Recovery Vessel” as inspired by my four “Mongruxx” Novels. In love and war, both machinery and people break down. Having a recovery vehicle in your armoured column doesn't just make sense. It's criminal if you…
Box cannot be opened without breaking it. This makes it easy to store your recovery key and identify if it has been messed with. Simply pause the print when getting to the crease at the top and insert your paper. The key should sit well…
These are recovery boards for the TRX4m Bronco. They are 1/18 scale and very detailed. Thanks to the original creator for the board design. I removed the Defender logo from the originals and added TRX4m and Traxxas logos, named…
Working with @BadLuck_423300, here is the newest version of the Luck Maker! Introducing the “Luck Maker 2.0,” a PLA 3D printed drone claw that embodies innovation and user-friendly design. Material : Crafted from PLA plastic, printed with…
Quick and easy prints to recover old CD and DVD cases
Freight Ten BullNose Recovery Vehicle as inspired by my four “Mongruxx” Novels. In love and war, both machinery and people break down. Having a recovery vehicle in your armoured column doesn't just make sense. It's criminal if you don't!…
In sobriety I have found plenty of free time for my new hobby: 3D printing. I have not found any prints for chip displays so I figured I might as well make one myself! If there's demand I can tweak the designs as needed, or eventually I…
Finally, a month after buying the first drone, I couldn't find an abnormal solution to an emergency landing on water, so I did it myself. For those who don't want to buy it in China: Use styrofoam parts so that the drone can land on the…
These are recovery boards for the TRX4m Bronco. They are 1/18 scale and very detailed. Thanks to the original creator for the board design. I've tailored them to the Bronco better by changing the logo from a Defender logo. Otherwise, they…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
If it looks like a wine bottle opener it's because that's where I got the idea lol I'M SHUTTING IT DOWN THE REMIX IS %1000 BETTER DONT DOWNLOAD MY MODEL CLICK HERE TO DOWNLOAD THE FUNCTIONING REMIX The speed of descent is too slow to…
EN: This filter was designed to prevent leaves, twigs and even certain insects from entering rainwater trays ! The gutter in the image measures 102.5mm wide by 62mm radius. Here is the list of necessary equipment: 1x water recovery filter…
In this sealed container you can store a seed phrase / recovery words for your krypto wallet. The predetermined breaking point at the top is meant to indicate whether the backup card is untouched or not. Also the container will help to…
I designed this model as a spare, since I broke the original. print in petg for food use, if possible coat it with resin
I created a plaque with a different text for the Crescent vase designed by @Osama.xyz, it is a prayer for recovery, a beautiful gift to give to your friends and family who are ill (May Allah heal them). Text : " شفاك الله وعافاك " “May…
Too hard for find good version of water landing. Take it. All-in-one. Foam or fully buoy. Base infill - 40%. Buoy/ponton - 5%. Category: R/C Vehicles
Seed phrase recovery sheet case fits Trezor and ledger recovery sheet
I had a refrigerant recovery cylinder with a cracked knob which I nursed along until it broke. I've been putting off printing a new knob for it, but when I got into it, the new one looked so good I had to do the other one as well. I…
The recovery hooks on Jeeps are great but it always seems like whatever I hook onto them has weaseled it's way off in the time it takes me to walk 50 ft away to operate the winch or whatever. Here are two models for the front and rear…
Print 100% infill with brim. 2x M2x10 2x M2 nut I recommend lightly gluing the screws so that they don't loosen during the ride and to prevent them from getting lost. Doporučuji šroubky lehce přilepit, aby se během jízdy nemohly uvolnit a…
A simple spare Therabody RecoveryTherm Cube Strap Mount.
This recovery float is intended for easy recovery after a fall into the water. The Mavic Mini will be irreparably damaged, but whoever is covered by disaster insurance will be able (maybe) to return it to receive the replacement. It is…
This is a printable design inspired by the classic Mosquito mini engine-powered model rocket. It's currently in development/testing, so feedback is welcome! I would recommend launching on a 1/4A of some kind (e.g. 1/4A3-3T); I've lost one…
Here you are spare parts for the most popular children toy that is produced 40 years (1985 till now). In the past there was produced Tatra in 2 variants. an excavator dump truck Today, only the dumper variant is produced and the excavator…
Many people have plenty of spare parts left over from upgrading their printer. The EnderBench is designed to fit most spares including Hotends, Stepper Motors, End Stops and Fan Ducts/Part Coolers The purpose of this is to test parts…
This magnet is designed for 6x3mm magnets in the back, and layered for multi color printing via Pause on Layer. Print your base in one color, flag in a color, then ribbon and wording in another. Recommend teal for the top color which is…
This is a hard case for the recovery phrase paper that comes with Ledger devices. The two pieces sandwich together to keep the sheet from coming out. Things you'll need 4x M2.5x12 screws 4x M2.5 bolts Instructions Place the recovery…
This project started as a desire to have a modern digital clock that would use the natural light of the room for illumination. This means that the screen is always at a natural brightness, with it looking like paper rather than a…
Same model settings add a pause at layer 11, drop the magnet in, and continue printing. Set so the magnet is behind .4mm of plastic and should hold just as well without worrying about glue. Magent 12mm x 2mm
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 6 textstring1 = Riverbend…
Recovery Tokens for 1 day, 10 days, 100 days and achievements tokens for 10, 50 days and 1 year. Box for tokens. Included FreeCAD 1.0 source file.
Situation: Sometimes you have to arrange your print in a way that is optimal for the print as a whole but will exceed the critical overhang angle in some small or minor regions. Exceeding the critical overhang angle leads to…
See Tutorial @ https://www.youtube.com/watch?v=yt6jZKzcsIE
vitrectomy recovery mirror, to help those who need to spend two weeks facing to the floor. parts you will need 2 mirror thickness of 4mm (you can choose length and width, I used 282x195mm for length and width) and hot glue
High recovery solvent reservoir for robotic liquid handeling in 96-well plate format. Also a two channel devision. Fusion360 file has the division as a separate object so that it can be moved to make a division in any location. Category:…
RC Scale Revery Boards / Traction Boards Designed for scale RC adventures, these recovery boards are an essential accessory when your RC car gets stuck in sand, mud, or tricky off-road terrain. Whether you need to slide them under your…
Customized version of https://www.thingiverse.com/thing:2305259 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2305259 Instructions Using the following options: BUILD = SINGLE WORDS1 = Riverbend WORDS2 =…
Customized version of https://www.thingiverse.com/thing:94018 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=94018 Instructions Using the following options: text = Riverbend Recovery height = 1 offset =…
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Riverbend line2 = Recovery line3 =…
My brother's massage gun has a button on the side which helps to release the battery, which broke. I had the design made in fusion as a part like the original and it works perfectly.. I know the chance is very small that someone else has…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
This 3D-printed quick-swap strap connector is designed for the Therabody RecoveryTherm unit, making it easier than ever to switch between short and long straps. No more fiddling with Velcro straps and readjusting each time you change the…
The two large models are not (quick) calibration tests. They are intended to print a 'real' bridge set high above the bed and wide enough to look and functions as a proper bridge to mimic the setting on a real print. Provides info on how…
Here is a brief tutorial on how to easily resume any print by automatically updating it GCODE. No more scrolling, moving and deleting like mad in notepad, only to forget a step and rage-reprint the whole thing. You just need to run this…
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = Riverbend line2 = Recovery line3 =…
This is my first real project, I was commissioned to make a set of coasters with the ARC logo on it. To see the real log check out www.ashevillerecoverycenter.com for a reference image.
English A simple temporary plug for a 126 mm inner diameter ventilation / heat recovery pipe. I designed this plug to close an open heat recovery ventilation pipe during construction, before the final diffuser or air valve is installed.…
Hi, please visit my channel for more models! https://www.youtube.com/channel/UCLE0Gmir5LrE8t9jllJq6vQ?sub_confirmation=1 Here is the original state of the car I started the “recovery”, I'll post the results soon
Created this to hand out at meetings or to use at home. Works great as a straight edge for underlining. You can print with no top or bottom layers and play around with infill settings to get a sturdy, see-through straight edge.
ice cube clicker from bfdi if you want you can add a 2 magnet and glue one on to ice cube and the other to the clicker so you can take her out of the ice cube recovery center
Requires a few m2 bolts to connect two parts.
Guide for mounting an ELRS recovery receiver module.
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
I created a plaque with a different text for the Crescent vase designed by @Osama.xyz, it is a prayer for recovery, a beautiful gift to give to your friends and family who are ill (May Allah heal them). Text : " شفاك الله وعافاك " “May…
Too hard for find good version of water landing. Take it. All-in-one. Foam or fully buoy. Base infill - 40%. Buoy/ponton - 5%. Category: R/C Vehicles
vitrectomy recovery mirror, to help those who need to spend two weeks facing to the floor. parts you will need 2 mirror thickness of 4mm (you can choose length and width, I used 282x195mm for length and width) and hot glue