715 models
Wall Socket Refrigerator Magnet with universal hole pattern for 2 to 4 pieces of magnets ⌀4 - 10 mm x height of 2 or 3 mm are uploaded. Please let me know, if you need different holes for your magnets. Support material is only needed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
A drip pan designed for the in-door water/ice dispenser of some Whirlpool refrigerators. Certain models place the water dispenser so close to the front, it ends up dripping down the door. This tray catches those drips. A sleeve for a…
Print approx. €10.56–€12.90 excl. taxPreliminary estimate for one variant
I love the original fish magnet from kennyd1gital but I don't have the exact magnet size, so I made this remix for 8x3mm magnets. You can stick a maximum of 3 magnets in, but in my opinion 2 are enough :) Please also give a like to…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Uses 12mm x 2mm magnets. Four layers of manual color change.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Made a Pitt refrigerator magnet and have embedded 3 8x3mm magnets. There are filament change stops for the magnet insertion, which is first(4.55) and then the color change(6.80). Printed on a Prusa MK3S+. No supports
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
РУЧКА ХОЛОДИЛЬНИКА. РАССТОЯНИЕ МЕЖДУ ОТВЕРСТИЯМИ 238ММ
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
People got tired of me trying to give them little tanks, and wanted rockets instead, so I drew this up the other night. It's a rather basic model of a Patriot PAC3 MSE missile, sliced lengthwise and with a couple of holes for 6x3mm…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Refrigerator egg holder for 6 eggs. Size: 129x97x23.5 mm Diameter of the hole: 35mm Print Settings Printer Brand: Prusa Printer: Mini+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Perimeters: 2 Filament: PLA or PETG
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Did your fridge handle let go? Do you want to stop thinking about this problem before you let go too? Print this thing! It's made for a whirlpool fridge, but seems like a common problem and design flaw among similar fridges so it may work…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Kühlschrank-Eierfach- Modular / Puzzle für Hünerei Gr.M oder 2 Wachteleier. Fehler-Update 27.04.2025: Der Puzzle-Zapfen bei Dateien Kühlschank-Eierfach- Modular 02 würde bei gemischter Zusammenstellung (2 kleine / 1 großes) zu Schäden am…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
Lösung für gebrochene Nasen an den Kunststoff Halteschienen Halterung für 4mm Kühlschrank Glasböden /Bauknecht/ und Andere
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This water ballast functions as a thermal buffer, stabilizing temperatures in cold chain refrigerators. Located above the storage baskets, this container, filled with water ice packs, uses its high thermal mass to absorb heat and preserve…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
This water ballast functions as a thermal buffer, stabilizing temperatures in cold chain refrigerators. Located above the storage baskets, this container, filled with water ice packs, uses its high thermal mass to absorb heat and preserve…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
I printed additional struts for the bottle rack of my BOSCH KGN39EICF refrigerator. Now also small bottles and beverage cans can be stored conveniently. Update: Added a cross stud in the back. - See pictures.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full. This…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Refrigerator Can Holder holds 10x 330ml drinks cans (see Print Instructions , below, if your cans are a different size). You put the cans in the front at the top, they roll to the back, drop to the bottom then roll to the front so you can…
This is a really simple print that needs no support. Thanks to input from Printables user faqiu who suggested making a shorter version, I have uploaded two alternative sizes to the original 240mm long model - 200 and 160 mm. I use the…
A fun little fish-shaped refrigerator magnet! The fridge magnet is actually quite strong because it uses (3) 6.4x6.4x2.5mm neodymium-iron-boron (rare-earth) block magnets, which are embedded in the body during printing (shown in the…
This is a replacement for the awful button style water dispenser in some Whirlpool refrigerators. There are two models attached, a “standard” and a “extra." The standard one may not depress the button due to flex in the model based on the…
This model was design for looks and not function. All the parts were printed separately and glued together. I used a stainless steel peel and stick for the body and doors. I did do a lot of sanding and smoothing on the printed parts to…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Use these 1250 names together with “ fridge poetry ” to create some refrigerator messages or poetry: Just print the names with a filament color change, slide in a 8x1mm magnet from the bottom (it sticks without glue) and have fun!…
This can organizer keeps the coldest/oldest drink at the front of the shelf where it is easy to grab. It is broken into six pieces to easily fit on the bed of your printer and can be easily glued together with CA glue. There are holes at…
Print it in PETG for more flexiblity - or TPU if you like.
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
I entered last competition with Skeleton theme soap dish, so it would be fun to make it as a tradition ! For this competition I modelled in Blender Full body skeleton with 6x3mm magnet connection holes. Had to make small changes to…
Inspiration This is my submission for the April 2025 fridge-themed printables design contest . The contest was my main motive for making this. I used to keep a magnetic whiteboard on my fridge to track needed groceries. But I found I was…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
The same great Fish Refrigerator Magnet , only smaller! Size decreased by 55%. Cuteness increased by 200%. Magnet consumption reduced by 66%! What's not to love?! Similarly to the original, a print pause is used to insert (1x)…
Tired of the cheap letters you find in stores that are weak and fall off, or made of foam and therefore impossible to properly clean? These letters are designed to be durable and super magnetic, strong enough to hold up paper notes, and…
This adds space for 3.97mm x 3.175mm magnets for Rikkers' Tiger Shark Clip design. The 3mf file is configured to pause for magnet installation. Warning during printing: the magnet can potentially jump up and stick to magnetic material…
refrigerator egg holder for 10eggs compatibile: Grundig GQN 21225 GB size: 241x108x28 mm diameter of the hole: 40mm
printed with 0.15 layer height Prusament PLA, Pinapple Yellow, Jet Black and Lipstick Red. Added an extra layer for the red cheeks and made three pockets for magnet size Ø 6x3 mm.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This water filter cap should replace various Whirlpool brand side-by-side refrigerator filter caps. Our cap was missing from the day we moved in, probably left on an old filter. It was always a pain to grab hold of the filter to remove it…
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
Tired of wasted vertical space in your fridge? This stackable organizer box helps you make the most of every shelf. Design highlights: Split into two print-friendly parts — no supports required Optional stacking connector — print only…
Mini refrigerator based on the Haier Model. Printed using PLA withe and silver. On the doors I used a metallic self-adhesive paper. For the interior shelves I used acrylic sheet to give a glass effect. Please feel free to comment to help…
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
This device is design for the DM26xx and DM28xx Dometic refrigerator models. I have included the design file so you can modify it to work with your brand/model of refrigerator. Simply install the device to hold the door slightly open.…
What if you and your young kid are alone at home, and you have to cook the dinner, but the kid likes to mess up the whole room while you are in the kitchen? In that case you bring your kid with you to the kitchen, but making a playground…
Base for Philips 2200 Automatic Espresso Machine with LatteGo Should fit the others as well but I haven't tested. Printed on BambuLab P1S at .2mm Layer in Black Elegoo PLA This was 3D scanned and modeled by www.f3dscans.com
This is yet another Samsung door mullion repair piece. There are a couple designs out there, and this is my attempt. This is the flipper that closes the center door flap on several Samsung refrigerators. It fits quite well, I've installed…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
This model is for a refrigerator magnet intended to be printed in 2 colors. I've included 2 models; one for an 8mm diameter round magnet and the other for a 10mm diameter round magnet. You can scale the design (X & Y) in the slicer for…
Designed this to fit a Whirlpool ice maker includes an insert that drops into the tray that can be replaced when stained or dirty. Print the insert on a textured sheet to help hide the water stains.
The source marked this model as adult content.
If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
For the best result print from PLA Prusament. Printing settings: layer height 0,2mm, 2 perimeters, 10~15% infill, 3 botton and 3 top layers, detect thin walls, detect bridge layers, no supports needed. Clean openings in Basket for Ratchet…
Combs to reshape the ac fins
My Mother in Law wanted me to print a can holder for her refrigerator and sent me a file. It was one of those HEX shapes and I printed it. Low and Behold a long print time and a failure. So I said the hell with it and just designed a new…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
EN: The stackable fridge egg holder is designed for printing on very small 3D printers such as the Průša MINI+. It consists of two parts (top and bottom). The bottom part (17x9x2cm) is designed in two versions (for 8 smaller eggs or 6…
LG Refrigerator door in door latch stop (Model LRSDS2706S). Since the OEM screw is very hard to access, this model is designed for you to scrape/cut the broken one flat on the bottom (pictured) then install this on top, gluing it on the…
Hold Your RV Fridge Door Open These door holders can be used to prevent your RV refrigerator from getting moldy when your motor home is not in use. Simply turn off your refrigerator as you normally would and insert these door stops…
The door bins that came in our ~20-year-old refrigerator gave out about 15 years ago. Frigidaire wants a whopping $55/ea to replace with an official Frigidaire part. But I am a 3D Printer! This design doesn't quite mimic the appearance of…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
DEMON SLAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Inosuke Hashibira magnet. Category: 2D Art
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
LG refrigerators like the one I have containing a rotating portion deep within the connector for the water filter. Sometimes, the rotating piece is left in a bad position after removing the old filter (such as in the example picture). If…
Thanks to @Kemmotar for the excellent design of the original. I made a few different sizes, and decided to put my Ender Extender kit to work. The result is marvelous. 30% Infill was used here, in Cubic Subdivision arrangement. I only did…
Originally modeled in Tinkercad as a replacement for a lost hinge courtesy of my kids…. Printed in PLA, general, defaults are ok, supports recommended for pin. This should slide onto the hook built into the door, however, in my case,…
A nice splattered Wiley Coyote refrigerator magnet (uses two 10 x 3mm magnets). Quick and easy to print requires no supports and minimal infill. Press a couple of 10 x 3mm magnets into the recesses (may need glue) and he's ready for…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Synopsis: Refrigerator door stopped closing on its own and eventually the bottom of the shelf thing started scraping the liner at the bottom. Diagnosis revealed that the two-part door closing cam system at the bottom-right door hinge…
I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Here's my take on those old refrigerator alphabet magnets. These measure about 2" tall and utilize 5mmx2mm round magnets. Each letter has it's own STL so you can batch print in different colors if you need. Here's a link for the magnets…
I made these for my son who is into all things truck. They all use three 8x3mm (real thickness 2.65mm) magnets found on Amazon here . Slice at 0.3mm layer height to give one layer of thickness to hold the magnet in. Two pauses/color…
Divider clips on to the lip of the door shelves in an RV refrigerator to keep things in place. 76mm front to rear clip width is 3.5mm. No supports needed.
The door shelves on every Frigidaire refrigerator Ive owned has broken in the same spot in the middle. This model helps fix that problem. Recommend printing with at least 3 walls and 20% infill. I printed in PETG as its a little more…
Individual Letters and Numbers based on the Spooky Chiller Font. Each has a set of embedded 1x3 mm magnets. These letters and numbers let you typeset your own message, practice your alphabet skills (for those kids out there) or keep track…
This is a simple winter cover to put behind the Thetford vent cover as shown in the picture. You can buy these at the store but they are expensive (for some piece of plastic) and mine are foldable and fit perfectly. These are sold as…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I recommend printing with the first layer at 20% speed without supports; this is already set in the .mf3 and .gcode files. The magnets I used were 5mm diameter and 2mm height. You will most likely need to put a little super glue in each…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
好吧，我設計了 Dachshund 的所有部分，它是這些的一部分。而且這些都是用磁鐵結合的，快來試試吧~
Printing instructions: Prints in 2 pieces with a color change for the egg. Use superglue to put it together. Skillet requires supports for the handle (theoretically you can print it upside down and rely on bridging but I don't recommend…
Got frustrated with the drips of water from the water dispenser running down the front of my fridge and staining. it. This tray helps alleviate that problem by holding back the small drips the might come from the spout or splash off as…
This is a door prop for a Dometic Refrigerator model 690470-05 used in the Airstream Bambi 16' Sport trailer to keep the fridge aired out during storage. Confirmed to work in the Dometic Refrigerator for the ALiner Expedition 2018. Should…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A practical wall-mount holder for Mounjaro (tirzepatide) injector pens / KwikPens. Attaches to the inside wall of your refrigerator to keep pens organized, easy to access, and out of the way — helping maximize fridge space. Features:…
Photo shows them as printed on my fridge. Printed using PLA, nozzle 0.4mm and layer height 0.20mm The magnet is 5mm/1mm and I ordered them from amazon. They fit snug in place, but will require drop of glue. You can print as many as you'd…
Samsung French door refrigerator doors have an issue where sometimes the mullion doesn't close properly due to the left door being misaligned too low. This shim is a $0.02 replacement for the $12 OEM part. Video describing problem and…
Printed in 2 colours for good contrast, black background and white logo. I used small magnets (11.60mm diameter, 3mm thickness). You can glue them on with super glue, but if the holes are a bit too small you can insert them with a hot…
Star Trek Emblem Refrigerator Magnet - Multi-material model - Printed on a Prusa MK3 with a Platte 3. Printer with 15% Infill in PETG
Magnet sizes are 8x3, 10x3, 12x3 ( also added one 15x5, so its more “universal” but its not tested yet ) To insert the magnets, print with a 0.15 layerheight then set "change filament" >>>layer 25<<< ( 3.80mm ) For the 15x5 at >>>layer…
Una simple llave, para facilitar la apertura del tapon de líquido refrigerante de una piaggio mp3.
![Skeleton [Refrigerator Magnet]](https://media.printables.com/media/prints/218804/images/1999824_ef024956-fe97-47fa-bc4d-b47d4fc6f789/0f347690-3a88-4947-84ce-f7cb67769895.jpeg)
