Ikea Billy Regal Hook
i create a hook for the Ikea Billy Regal Print instructions Infill between 10-15% You need no support for printing
- Downloads
- 143
- Likes
- 33
- Rating
- 5
813 models
i create a hook for the Ikea Billy Regal Print instructions Infill between 10-15% You need no support for printing
Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…
Since I couldn't find any replacement parts for my old IKEA Benno shelf, I simply designed my own shelf pins for 5mm. The vertical part is slightly longer to better balance the pressure. Print the model upside down; it will adhere better…
english In our living room furniture, which is over 30 years old, the shelf supports become brittle and break at the slightest vibration. Since the shelves are milled out on the sides, the supports must have exactly the same dimensions.…
Regalhalter für Holzbretter, sehr stabil und im Design ansprechend. Versteckte verschraubung für 3-3,5mm Schraubendurchmesser. Shelf holder for wooden shelves, very sturdy and attractive in design. Hidden screw connection for 3-3.5mm…
This tool holder is suitable for REGAL VISE You can rotate a holder when tying
Druck-Tipps: mit drei Außenkonturen drucken für bessere Stabilität mit Hilfe eines Höhenbereichs-Modifizierer zwischen 4 mm und 6 mm mit 6 Außenkonturen (Perimeter) und 5 massive Basisschichten drucken, damit der Haken für die Wandschiene…
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it.
Das Eckregal ist innen in zwei Fächer geteilt. Es besteht aus der Eckablage selbst sowie dem Halter Der rechte Halter wird mit zwei Streifen Doppelklebeband an den Kacheln fixiert. Danach wird das Regal wie auf ein Scharnier einfach…
Ein Regal, das mit einem Powerstrip Large (2 kg Tragkraft) an die Rückwand eines Schrankes geklebt wird. Die Lasche des Strips steht über, sodass er sich einfach wieder entfernen lässt (siehe Foto). Die Abmessungen der Ablagen betragen…
Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…
Der Regalhalter ist für ein Rohr (Installationsrohr) mit Außendurchmesser von 25mm konstruiert. Die Länge des Rohres bitte an dein Regal anpassen. Bitte kontrolliere vor dem Druck, ob die Position der Bohrung für deinen Regalhalter passt!
Schnell und einfach zu druckende Filamenthalterung zur Montage im Schrank oder an der Wand. Zusätzlich wird ein Rundholz mit einem Durchmesser von 30 mm aus dem Baumarkt benötigt. Dieses kann auf eine beliebige Länge zugeschnitten werden.…
holder for cable/filament spools . the hole for the pipe is 25mm
designed to hang a Rega Planar Neo v2 PSU underneath a 8mm thick glass table
Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…
Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…
Articulated surprise gift box: Educational, its articulated base will allow you to surprise your friends with a surprise gift. Customizable, its pieces are printed separately, you can use different colors without needing a multi-material…
Just another hexagon-style filament rack for spools with a diameter of 200mm. For the horizontal struts I use 500mm long round rods made of beech with a 20mm diameter. In my case, 7 spools with a width of +/- 65mm fit on it. Printed out…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
Dieses modulare Holy-Regal kann mit nahezu beliebig vielen Haltern zusammengesteckt werden, empfohlen wären aber maximal zehn Halter pro Regal. Beim Zusammenstecken legt man am besten ein Seitenteil mit den Bolzen nach oben hin, baut die…
Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to The honeycomb shelf is invisibly attached to the wall with the base plate. The…
Regal's Prop Shop team worked from WETA's 3D scans of Alexander Skarsgård costume to provide fans the ability to print their own WICKER collectible popcorn container in celebration this unique film opening at Regal theatres 10/23! FREE…
Es ist ein Winkel für eine Regalfläche.
ein Regalhalter kompatibel mit der Honeycomb Storage Wall mit einer Tiefe von 250mm & Höhe 200mm.
Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…
Here we have shelf angles in 200mm. The brackets can be installed hanging or standing. There are 2 versions with sharp and rounded edges additionally there is 2 different versions of thickness (7 and 10mm). If further versions are desired…
Regal für Weihnachtswichtel oder Puppenhäuser. 11 verschiedene Regale und 4 verschiedene Boxen.
Remix v2 TonieWabe - Modulares Regal für Toniebox-Figuren. TonieHive - Modular shelf for Toniebox figures.
Hier eine platzsparende Lösung um ein Paar Schuhe im Wohnmobil unterzubringen. Ich habe das Teil in ASA gedruckt mit 3 Walls, am besten mit Brim innen und außen drucken, da das Teil zum warpen neigt.
Dieses moderne geometrische Wandregal kombiniert minimalistisches Design mit praktischer Funktionalität. Durch die versetzt angeordneten quadratischen Fächer entsteht ein einzigartiger Blickfang, der sich perfekt für Wohn-, Schlaf-,…
He does need support around his tiny front legs and fangs I just paint the supports on and make sure the supports don't encapsulate the fangs. I have printed at the size i published at but his legs are fragile i would size up a tad to…
Für meine PRUSAMENT Filament Rollen, habe ich dieses Regal entwickelt. Für die beste Druckqualität (0,2 mm) muss man leider viel (Druck-)Zeit haben, die sich jedoch sehr lohnt. Druckt man die Teile im 0,3 mm Draft-Modus, werden die…
Dies ist ein Monitor-Regal (monitor shelf) passend für den 34 Zoll Curved-Monitor Philips 349X7 Print instructions Printed on Prusa i3 MK3S Layer height 0.20 mm Infill 15% No supports if you printed up-side down, no brim
Gewürzregal passend für die Dosen von JustSpices als 4er 5er oder 6er Variante können Sie das Regal einfach mit poppelseitigen Klebeband in der Küche montieren.
🖤 Modernes Wandregal – Versetzte Ablageflächen
Metal rods for board in cabinet wern´t enough to support weight. So I designed some brackets with to holes to screw them in place. When I uploade the model I realized there were already some similar models so I added this my model as a…
Modulares Regal für Lego-Figuren mit: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der Waben sichtbar Integrierter Einschub für 2x2 Legoplatte damit die Figuren halten…
Now that the free TonieHIVE shelf has been downloaded over 10,000 times from various platforms, it was time to design a new version for my second child! Even more possibilities for creativity and perfect adaptation to the sizes of the…
Für meine 3D Drucke wollte ich ein Regal haben. So habe ich mir Teile für ein Hex-Regal konstruiert. Die Teile dazwischen sind aus 4mm dickem Pappel Sperrholz. Die Sperrholz-Platten sind ca. 420x600x4mm. Zuschnittsdaten als DXF habe ich…
2 Walls 15% Infill 0,2mm layer height
Hexagon Regal für Funko Pop Figuren. verschiedene teilstucke die ineinander verbunden werden mit Verbindern. Mit Plattformen und auch ohne einfach ineinander stecken wie man es möchte. das innen Teilstück sollte transparent sein und wird…
Un regalo d'amore in un giorno importante Buona festa *** A gift of love on an important day Good party
Découvrez le modèle 3D du Stickman Assis (Regard le ciel), une représentation charmante d'un personnage dans une pose contemplative. Ce modèle ludique et minimaliste est conçu pour être imprimé en 3D, permettant ainsi de créer des scènes…
Das Langloch ist ca. 6x13mm, das vierkant ca. 8x6mm
Winkel für ein Stabiles Regal. Super für schwere Gegenstände einfach zu drucken.
Regal has partnered with A24, to provide fans the ability to print their own Backrooms collectible popcorn container in celebration this unique film opening at Regal theatres May 29th. FREE POPCORN!!! If you print this out at full scale…
Majestic, powerful, and proud — the Regal Griffin stands as a timeless guardian between earth and sky. With the body of a lion and the head and wings of an eagle, this noble creature is a symbol of strength and vigilance. From its…
Hier ist mein selbst designtes 20cm x 20cm Wand Regal mit 2 Langlöchern um es ordentlich an die wand zu montieren.
Strong wall bracket with round bar support. -- A round bar with a diameter of 20 mm is required for the print. The round bar must be angled at the ends and must rest against the wall and the overlying wooden board. Printed with 0.4 nozzle…
Der Schrankkorpus muss mit ABS gedruckt werden. Für die Front wird 3mm dickes Acrylglas benötigt. Jedes Frontelement wird mit 3 verdeckt angebrachten Scharnieren am Korpus befestigt und durch jeweils 2 Magnete verriegelt. Die 3 einzelnen…
un plato para regar cualquier tipo de planta simpre que quepa y se puede hacer a altas velocidades.
Hier habt ihr mein designtes Wand regal in Hexagon form
Porta la magia del Natale nella tua stampante 3D! Questo modello rappresenta una simpatica statuina di Babbo Natale affiancato da un albero decorato e alcuni pacchetti regalo. Il design è pensato per essere stampato facilmente, mantenendo…
Here is the model for Regan Bear. The Regan is a good but Possessed friend of Barry, and like her friend she seems to just want to be your friend too, do you have space for the Regan Bear? maybe she can keep Barry Company. I hope you…
Model is suitable for most of the printers to print. check out my portfolio- https://deep3dsea.com/ Models can be resized to other scales. If you need any help, feel free to contact me. Thanks
choose the casing that you need, choose the cover that you need. In case of more cover, please let me know and send me the dimensions of you shield Found lots of more case and covers in the remixes .
Zubehör für die beliebten TKT Schwerlastregale (z.B. erhältlich bei TOOM). Enthält: Einzelfuß (Höhe von 1-4mm) Doppelfuß (Höhe von 1-4mm) Biegehilfe für den Unterzug (60°) Clips zum Verbinden von 2 Regalen Abdeckkappe um die Lücke…
Add a touch of strength and elegance to your workspace with this low-poly lion statue. Designed to balance realism with clean geometric lines, this model gives off a modern 3D-printed aesthetic while maintaining the proud, regal posture…
Pocket Christian crosses for Church Congregations to provide a daily reminder of Jesus Christ's teachings.
Beim Drucken von Fach links und rechts braucht ihr keine Stützen und könnt ihr dann einfach die Teile ineinanderschieben, bei den Senkrecht und Waagerecht Verbinder bitte mit Stützen drucken. Falls ihr Verbandskasten, Warnwesten drucken…
Can be printed without support Can be arranged to a bigger shelf if you print more.
A resizing of the Iron lung popcorn bucket for soda cans. All credit goes to original creators.
Regal Rooster is an elegant 3D sculpture that embodies the pride and charm of a rooster. With its flowing curves and majestic stance, this minimalist design highlights the rooster's iconic comb and tail feathers. Perfect for 3D printing…
modular shelf for 5mm thick wooden boards can be assembled in different sizes boards can be inserted every 60 mm wooden boards can be put in with a hammer, I didn`t need any clue, holds tight with connectors the legs can be connected…
Regal Winkel für Bad als Stecksystem.
Regal has partnered with Netflix, to provide fans the ability to print their own One Piece collectible popcorn container in celebration of Season 2 playing at select theatres March 10th. FREE POPCORN!!! If you print this out at full scale…
Die Inspiration zur Konstruktion des Weinflaschenregals bekam ich von Vanson und pedrocadiz ( https://www.thingiverse.com/thing:2288142 und https://www.thingiverse.com/thing:2886369 ). Ich habe diese Idee aber neu umgesetzt, um das Regal…
This is just a little filament storage system. You can stack multiple parts of this. It's just so you can reach your spools in a tower much easier. On the bottom you have some little feet that can interlock with the holes on top so it…
Two different sizes with 190 or 150 mm length
Ständig hat man etwas irgendwo aufzuhängen, sei es die Arbeitsjacke, die man ständig benötigt oder aber der Klammerbeutel der Frau. Ein kleiner Haken mit der Aufnahme für mein Schwerlastregal schafft nun Abhilfe. Solltet ihr diesen in PLA…
Printed with Extrdur PETG Metallic and with M3 Inlets and screws.
Gewürzregal speziell konzipiert für Fuchs-Gewürzdosen, zur Montage an der Wand oder Innenseite der Küchenschranktür.
A simple clean looking Bracket for a shelf 13x13cm in size, Pretty stable with 15% infill. // Ein simpler Regal Winkel für Regale, 13x13cm groß, Ziemlich stabil mit nur 15% Infill.
Painted with four colors: Black, Blood Red, Bone, Lighter Red.
This highly detailed Superman wall relief features a stylized bust of the Man of Steel embedded in an ornate, shield-shaped frame. Perfect as a heroic decorative piece for any fan cave, shelf, or wall display. The elegant swirling…
Clip-In-Stabilisator für Badregalfach - VW Grand California 600 Funktion: Das 3D-gedruckte Clip-In-Modul dient als rutschhemmender Einsatz für das Badregalfach des VW Grand California. Es wird direkt an die horizontalen Stangen des…
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. For personal use only. No commercial sales.
This tool holder is suitable for REGAL VISE (shaft diameter is 10mm) You can rotate a holder when tying You can up holder height by using lift up tube
A set of slides to get the Trofas Boxes into an Kallax shelf. It s a short and a long slide, both together are the full length of an Kallax sqare. Printing in PLA and PETG is possible. Ein Set von 2 Schienen, um die Trofas Boxen in den…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I loved “ Bomb Busters Insert, Organizer, and Drop-In Replacement Upgraded Wire Stands ” by iamrobertv , but we had some issues with wire tiles being easy to knock over. I added some guides to help keep the wires in place and aligned with…
Dieses moderne offene Design-Regal kombiniert eine minimalistische Optik mit einer besonderen, geometrischen Form. Durch die integrierte zweite Ebene eignet sich das Modell perfekt zur stilvollen Präsentation von kleinen Deko-Objekten,…
Ein einfacher Halter für 3 Prusa MK3S Druckplatten zur Montage unter Regal, Tisch, etc.. Die beiden Halter habe ich mit 3,5x16 Schrauben von unten an ein Regalbrett geschraubt. Die Druckplatten werden dann von vorne eingeschoben.
Eine einfache Regalboden Halterung je mit halteplatte und 2x mit Anschlag für jede Seite, damit das Brett nicht raus Rutschen kann. Die Bohrung hat 5mm und lässt sich sehr Passend einsetzen. Gedruckt mit einfachem PLA, 0.4er Düse. Drucker…
Best robustness you get if you print it in shown Direktion. Upper Hole = 10mm lower Holer = 5mm Distance between two Holes = 25mm Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Resolution: 0,22 Infill: 100% Notes:…
Da bei Ikea die Eckregalböden der Serie Ivar ausverkauft sind, habe ich mir aus 18mm Dreischichtplatten selbst welche gebastelt. Diese Verbinder halten den Regalboden auf der gewünschten Höhe und ist so abgestimmt, dass dieses wieder auf…
Dies ist die Halterung für ein Regalbrett. Die Tiefe des Regals beträgt zZt 20cm, kann aber mit der enthaltenen F360 Datei leicht angepasst werden. Gedruckt werden kann ohne Support, es ist jedoch zu beachten dass je nach benötigter…
Dieses kleine Regal ist perfekt, um deine 3D-gedruckten Benchys aufzubewahren. Mit doppelseitigem Klebeband lässt es sich ganz einfach befestigen. Die Waben an den Seiten sorgen dafür, dass es stabil, aber trotzdem leicht ist. Gedruckt…
Filtro de fregadero de cocina de plástico, colador, red de filtrado de alcantarillado, tapón de desagüe de piso, colecto fácil de imprimir ideal para los restos de filamento rápido de imprimir boquilla 0.4
Filamentaufbewahrung ist so eine Sache. Ich benutze öfters mal unterschiedliche Farben und Filamente. Daher habe ich mich entschlossen, ein kleines Sortiment immer parat zu haben und entschloss mich hierfür ein Wandregal zu gestalten. Es…
You can use a cheap and simple broom / device / tool handle as rods. Mine had a diameter of 27 mm. (The hole is 27,8 mm so check your tolerances. ;D ) I also added a version which fits for 28 mm handles. I printed the brackets in PLA. 3…
Für meine PRUSAMENT Filament Rollen in Trockenboxen , habe ich dieses Regal entwickelt. Für die beste Druckqualität (0,2 mm) muss man leider viel (Druck-)Zeit haben, die sich jedoch sehr lohnt. Druckt man die Teile im 0,3 mm Draft-Modus,…
Start your morning with a royal touch! 👑 The Regal Egg Holder brings a refined aesthetic to your breakfast table. Inspired by classic chalices, this egg cup offers a timeless, elegant silhouette, perfect for those who love stylish yet…