Search results: rein

Sort order

2,555 models

P
PrintablesSeppo

Reindeer Christmas Card Snap-Together Reindeer

This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…

Downloads
13,706
Likes
3,033
Rating
4.88
P
PrintablesDeltaprints

Cute minimalist Christmas reindeer decoration

This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…

Downloads
13,665
Likes
2,506
Rating
4.99
P
PrintablesDeltaprints

Minimalist (Christmas) low poly reindeer

🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…

Downloads
13,073
Likes
2,252
Rating
4.73
P
PrintablesAWT Works

Modular Filament Storage System - V1 (Tested & Reinforced Design)

IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…

Downloads
9,197
Likes
3,085
Rating
4.89
P
PrintablesMaxT

Christmas Door Trim Corner 18 - Santa Sleigh and Reindeer and Christmas Tree (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
7,243
Likes
1,619
Rating
4.96
P
Printablesevax design

Cookie Cutters Reindeer

It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…

Downloads
4,974
Likes
1,118
Rating
4.79
P
Printables3D Fluffies

Knitted Reindeer

CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!

Downloads
4,844
Likes
1,139
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 60 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
4,453
Likes
838
Rating
5
P
PrintablesMolodos

Ferrero Rocher Reindeer

A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…

Downloads
4,062
Likes
1,217
Rating
4.98
P
PrintablesKaminoKGY

Reinforced replacement for broken kitchen hinge

Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰

Downloads
3,897
Likes
2,099
Rating
5
P
PrintablesE3D

Rupert the Reindeer ~ A 3D Printer stress test

MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…

Downloads
3,191
Likes
460
Rating
4.94
P
Printablesvexanix

Reinforced Articulated Shark

The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…

Downloads
3,041
Likes
415
Rating
4.77
P
PrintablesJADV

IKEA LACK reinforcement

Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…

Downloads
2,938
Likes
991
Rating
4.97
P
Printableskang159

Reinforced Articulated Shark w/ Keyring

I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…

Downloads
2,414
Likes
317
Rating
5
P
PrintablesTms Lht

Heavy-Duty Wall Hook – Reinforced 3D Printable Storage Hanger

A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…

Downloads
2,387
Likes
607
Rating
4.38
P
Printablesjet_maker

Deer Head low poly / Hirsch Kopf / reindeer head / Rentier Kopf

This is my version of a reindeer head. It seems like there is a nearly similar version, but this is made by a special computerprogramm so not copied. It was made with a free vector picture. Enjoy printing. View my other models too.

Downloads
2,321
Likes
567
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 62 - Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,296
Likes
490
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 57 - Santa Sleigh and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
2,280
Likes
489
Rating
4.81
P
Printables3DesignsCH

Ikea Lack Table Reinforcement

The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking. My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for…

Downloads
2,233
Likes
493
Rating
4.92
P
PrintablesBaeoniq

Reinforced Wall Hook - V2

This updated version of my original 'Wallhook' makes it even stronger than before, and featuring rounded edges that provide a cleaner look while reducing stress concentration points in the plastic. I have integrated two dedicated screw…

Downloads
2,086
Likes
911
Rating
5
P
PrintablesPrintThatBoii

Christmas tree reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Downloads
1,897
Likes
371
Rating
4.87
P
PrintablesFilcuk

Best Spoon Rest Ever - Reinforced [remix]

A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…

Downloads
1,871
Likes
548
Rating
5
P
Printablesedgett

Christmas Reindeer - Prancer

This remix improves on a few areas that made printing the original design very difficult. feet have been made flat on the bottom and even, so deer stands in a more stable manner custom supports have been made more substantial to provide…

Downloads
1,743
Likes
355
Rating
5
P
PrintablesEqubuxu

Reinforced Economical Gridfinity Bins - No vase mode (w/ half grid)

Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…

Downloads
1,675
Likes
303
Rating
4.96
P

MINI REINDEER / CHRISTMAS MINI FIGURE / FIGURE / FIGURINE / TABLETOP DECOR / LITTLE GIFT

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI REINDEER Say hello to…

Downloads
1,608
Likes
284
Rating
5
P
PrintablesStenly_G

Rudolph the Red-Nosed Reindeer - Christmas

Rudolph 🦌, the red-nosed reindeer, shines bright as the hero of Christmas Eve! With his glowing nose and cheerful spirit, he leads Santa's sleigh and spreads holiday magic everywhere. 🎄✨

Downloads
1,582
Likes
365
Rating
4.75
P
PrintablesMehTechArt

Heavy-Duty Reinforced Corner Brackets

Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…

Downloads
1,566
Likes
805
Rating
5
P
PrintablesMaxT

Christmas Door Trim Corner 27 - Santa Sleigh and Reindeer and Snowflake (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,566
Likes
346
Rating
5
P
PrintablesC47_3d

Reindeer Phone Stand

Check out more models from Phone collection https://www.printables.com/@C47_3d/collections/793008 and Xmas collection https://www.printables.com/@C47_3d/collections/155488 --- If you want to sell prints of this models you can buy a…

Downloads
1,542
Likes
471
Rating
5

Ikea LACK Reinforcement

No support needed. Use 4x20 mm wood screws without predrilling.

Downloads
1,531
Likes
325
Rating
5

Reinforced Creality K1 Side Spool Holder with Filament Guide - 2 Piece Print

Fellow Creality K1 Owners, Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to…

Downloads
1,524
Likes
190
Rating
4.88
P
PrintablesMarco Di Fiore

Reindeer Voronoi

I printed this model with a white PLA, 0.4 nozzle, 0.2 line width and organic supports on. I added a cylinder for each leg to improve the first layer adesion and help the model to stand. My first print was downscaled to a 10cm model, and…

Downloads
1,520
Likes
366
Rating
4
P
PrintablesMaxT

Christmas Door Trim Corner 23 - Santa Sleigh and Reindeer and Gifts (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…

Downloads
1,504
Likes
328
Rating
5
P
Printablesmoodyswing

Reinforced Side Spool Holder - Ender 3 V3 SE/KE

Reinforced version of side spool holder with option to attach side bin

Downloads
1,425
Likes
165
Rating
4.91
P
PrintablesFreshAndClean

Holiday Reindeer Decorations

Reindeer are a staple of the holiday season. These models are unique and work well in any scenario. You can hang them on a tree, or just place them on a table. The base model used for this design is a composite of multiple others I had…

Downloads
1,341
Likes
276
Rating
5
P
Printablesp3rr1ff3ry

Reindeer Antlers Headband

Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…

Downloads
1,304
Likes
221
Rating
5
P
Printableswrkyle

Honeycomb Bookend (reinforced)

A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…

Downloads
1,273
Likes
187
Rating
4.88
P
Printablesf4r0kh

Flipper Zero case (reinforced)

I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…

Downloads
1,254
Likes
167
Rating
4.91
P
PrintablesJADV

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Downloads
1,253
Likes
236
Rating
4.97

NASA-Style Hexagonal Flexible Mesh/Fabric (Reinforced) l Full design process included (Fusion 360)

🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…

Downloads
1,220
Likes
138
Rating
4.89
P
PrintablesAUGU5TO

Modular Gravity Tool Holder – Adjustable, Reinforced & T-Nut Mountable (Remix)

Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…

Downloads
1,208
Likes
1,006
Rating
4.75
P
PrintablesDuckMeat

Bambu X1/P1S Chamber LED Riser Upgrade (Reinforced)

Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…

Downloads
1,198
Likes
255
Rating
4.95
P

19-inch Reinforced Modular Rack Mount Blanks

A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…

Downloads
1,196
Likes
111
Rating
5
P
PrintablesTaylor

QUICK-CLIP : Heavy-Duty Reinforced Buckles

NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…

Downloads
1,179
Likes
215
Rating
4.88
P
PrintablesOshhe Yt

Universal Reinforced 90° Corner Bracket

⚙ Print Settings & Advice: * Orientation: Position the model flat on the bed to ensure the screw holes and reinforcing rib print perfectly without any support material. * Perimeters (Walls): Min. 4 perimeters for extra rigidity. *…

Downloads
1,152
Likes
579
Rating
0
P
PrintablesNozzleSting

45° Winkel mit Verstärkungsrippen für Regale <<>> 45° angle with reinforcing ribs for shelves

(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…

Downloads
1,146
Likes
389
Rating
5
P
PrintablesWusaweki

Coffee Scoop reinforced

The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.

Downloads
1,138
Likes
119
Rating
4.87
P
Printablestammets

Reindeer napkin holder

Reindeer napkin holder for Christmas. Or why not every other time as well.

Downloads
1,088
Likes
315
Rating
4.81
P
Printablesthall72

Lego Compatible (10928.dat) Technic Gear 8 Tooth Reinforced

This model is compatible with the lego system.

Downloads
1,082
Likes
67
Rating
5
P
PrintablesDarazsweb

IKEA Lack enclosure reinforcement supports

The IKEA Lack table is used by many makers to build a 3D printer enclosure. But the table is lacking stability, the legs are not connected to the table tightly enough. By the time the connecting screw gets even looser in the soft (pressed…

Downloads
1,049
Likes
196
Rating
4.83
P
Printablesastrophage

Reinforced Parametric Zip Toggle

This remix thickens the loop to reduce the change of breakage via wear and tear.

Downloads
1,025
Likes
169
Rating
4.86
P
Printablesttr0n

Bird Water feeder (reinforced)

A remix of Hajo's most excellent bird water feeder. Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works! Unfortunately, I over tightened the PET bottle and sheared the…

Downloads
1,004
Likes
115
Rating
4.91
P
PrintablesTheMasonX

Happy Reinforced Articulated Shark

Liked the reinforced joints that vexanix added, just wanted the other head(s) from the sharks Category: Toys & Games

Downloads
1,002
Likes
113
Rating
5
P
PrintablesvmLOGIC

Bundesliga - alle 18 Vereinswappen 2023/24

English: This set includes the emblems of all the clubs in the 2023/24 season of the German Football League (Bundesliga). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…

Downloads
996
Likes
42
Rating
5

Winter Reindeer - Christmas Holiday Ornaments - 4 Knitted Styles

According to my girlfriend, this is the cutest model I've made so far. This is my Reindeer Christmas Holiday Ornaments ! Check out my page for them as just decorations, if you don't need any more ornaments! I printed one myself, and the…

Downloads
993
Likes
178
Rating
5
P
PrintablesKinematic Digit

5015 Parts Fan Mount for Sprite Extruder (Reindeer Shroud)

My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…

Downloads
987
Likes
157
Rating
4.89
P
Printablesthall72

Lego Compatible (3941.dat) Brick 2 x 2 Round without Reinforcement

This model is compatible with the lego system.

Downloads
986
Likes
45
Rating
5
P
Printablesrstastny

Reindeer christmas cookie cutter

Reindeer christmas cookie cutter

Downloads
982
Likes
114
Rating
4.86
P
PrintablesIvanovic

Succubus Reina Infernal - Demon Queen Pose Dominante

¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…

Downloads
978
Likes
151
Rating
5
P
Printablesthall72

Lego Compatible (94925.dat) Technic Gear 16 Tooth Reinforced

This model is compatible with the lego system.

Downloads
970
Likes
55
Rating
5
P
Printables3D MAGIC

Knitted Christmas Reindeer

A little deer with a cozy Christmas feel! 🦌🎄 With its big eyes, tiny antlers, and knitted texture, this little deer makes a sweet addition to your holiday decorations. The raised cable-knit pattern gives it the look of a winter sweater,…

Downloads
967
Likes
207
Rating
5
P
PrintablesReddaux

Reindeer for Giant LEGO Wreath (Christmas)

I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, and thought this reindeer was cute. Left and right facing versions included. No supports needed. Thank you @ClarasLittleArtworks for the original reindeer…

Downloads
958
Likes
302
Rating
5

Reinforced corner connection for pipes

This is a parametric model made in Fusion 360 to suit your pipy needs. Simply go to “Modify→Change Parameters” and choose the values that you want to suit your pipe's diameter. Beware, the stl provided is for 32mm diameter pipes. Thanks…

Downloads
919
Likes
421
Rating
5
P
PrintablesKOGI3D

Print in Place Articulated Reindeer Model

🎨Try KOGI LAB for free at kogilab.com ! 🦌 Christmas Reindeer – Multicolor Flexy Miniature🎄 Hey everyone! 🎅✨ The holiday spirit just got an upgrade - say hello to the Christmas Reindeer! 🦌🎄 This adorable flexy reindeer is ready to trot…

Downloads
901
Likes
245
Rating
5
P
PrintablesLW design

IKEA LACK reinforcement bracket

A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…

Downloads
897
Likes
172
Rating
5
P
PrintablesKadi79

Ikea LACK Table Reinforcement

Printable without support. PETG recommendet, everything else possible. Screw holes for 4x40 Woodscrews. Credit to Littleorangeprintthingy for the original design I oriented this on. Althogh I constructed everything form Scratch.

Downloads
875
Likes
448
Rating
4.67
P

Reinforced Modular 19-inch keystone patchpanel

A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…

Downloads
870
Likes
81
Rating
5
P
PrintablesKONEz*347

Santa Sleigh & Reindeer Christmas Decoration

Santa Sleigh & Reindeer Christmas Decoration

Downloads
864
Likes
220
Rating
5
P
Printablesgeodave

Better Tolerances on Reindeer Christmas Card

I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…

Downloads
861
Likes
137
Rating
4.88
P
Printablesgerda

Reinigungs Spachtel Opti Grill

Das Tool ist zum ersten groben reinigen der Grill Kontakt Platten des Optigrill und Optigrill Elite im kalten Zustand nach dem grillen, um die angebrannten Reste problemlos zu entfernen. Mit Küchentüchern sind die Gnupsis damit das…

Downloads
858
Likes
72
Rating
4.75
P
PrintablesPrintThatBoii

Jumping Christmas reindeer 2 wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Downloads
854
Likes
179
Rating
4.75
P
PrintablesKarkovski

Prusa MMU2 Reinforced Idler

This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…

Downloads
842
Likes
87
Rating
4.86
P
PrintablesŠtístko

Voronoi Reindeer

This 3D model is a reindeer designed with a Voronoi pattern, which gives it a modern, cellular look. It's perfect for festive decoration or as a year-round piece of art. Detailed Description and Usage The Voronoi Reindeer model is a…

Downloads
827
Likes
140
Rating
5
P
PrintablesBuildItMakeIt

Reindeer Kit Card Multicolor

The reindeer card kit is a remix for multicolor printing. The ears, eye, nose, hoofs, and bum are all separate so you can print easily changes like removing the eye and setting all the colors. Clippers can be helpful to remove from the…

Downloads
826
Likes
324
Rating
5
P
PrintablesJoão

CHRISTMAS REINDEER COOKIE CUTTER

CHRISTMAS REINDEER COOKIE CUTTER

Downloads
814
Likes
82
Rating
5
P
PrintablesMiscPrinter

PIP Vise Grips with Reinforced Handle

Remix to increase the stiffness of the handle. Added a chamfered rib to the back of the handle so it flexes less during use. I also made moderate changes to how the joints are built to increase their stability during printing. I recommend…

Downloads
795
Likes
97
Rating
4.89
P
Printablesplasticbugs

Bag Clip (Reinforced with M3 Bolt and Nut)

This is a remix of the Bag Clip by Andrei. I love the design and in the spirit of over-engineering a bag clip, I added a hole for an M3 bolt and nut in place of the original's printed dowel. It uses a standard 15mm long M3 bolt and M3 nut…

Downloads
793
Likes
150
Rating
4.88
P
PrintablesMaxT

Christmas Door Trim Corner 56 - Christmas Tree and Reindeer (Christmas ornament)

https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…

Downloads
782
Likes
174
Rating
5
P
PrintablesDan Erbert

Next Level Racing - GT Lite / GT Lite Pro - Reinforcement

EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…

Downloads
775
Likes
76
Rating
5
P
PrintablesSLIMPRINT

Minimalist Reindeer, Seasonal Christmas Decoration

A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…

Downloads
766
Likes
195
Rating
5
P
PrintablesPrintThatBoii

Jumping Christmas reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Downloads
766
Likes
200
Rating
4.75
P
PrintablesIdea Prints

Christmas Door Trim Corner -Reindeer #5

Christmas Door Trim Corner -Reindeer🦌 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…

Downloads
764
Likes
137
Rating
5
P
PrintablesFuriku

Flexible Christmas Reindeer

Christmas Reindeer in flexible form! Became inspired to make one after having found flexible christmas tree on reddit posted couple days prior (you can actually see them in the background on my picture) -…

Downloads
750
Likes
149
Rating
4.83
P
PrintablesKolbi

Christmas Cookie Biscuit Gingerbread Cutters (vykrajovátka na sušenky perník Vánoce) Part_01 9Pcs, Gingerbread Man (Reindeer) Panáček Sob, Glove Rukavice, House, Christmas Sock, Lollipop, Santa Claus Mikuláš, Sleigh Saně, Snowflake Vločka, Star Hvězda

Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
745
Likes
66
Rating
5
P
PrintablesPrintThatBoii

Christmas cute reindeer wall art/Christmas tree decoration

You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…

Downloads
735
Likes
183
Rating
4.67
P
Printablesthall72

Lego Compatible (4185a.dat) Technic Wedge Belt Wheel - Not Reinforced

This model is compatible with the lego system.

Downloads
732
Likes
42
Rating
0
P
PrintablesSK S

Furniture corner with reinforcement.

Уголок мебельный с усилением 25 мм.

Downloads
728
Likes
158
Rating
5
P
Printables3D Brothers

Low-Poly Reindeer

🦌 Low-Poly Reindeer Minimalist, geometric reindeer for 3D printing ✨. Sturdy, decorative, and perfect for festive projects 🎄. Have fun printing! 😄✨

Downloads
725
Likes
177
Rating
5
P
Printablesstijn

19" rack keystone patch panel 1u reinforced

this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…

Downloads
710
Likes
89
Rating
5
P
PrintablesZuff

ENDER 3 S1, S1 PRO, REINFORCED BRACKET Z AXIS MOTOR

FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Reinforced part to fix the "Nema 17" motors of the Z axis on Creality…

Downloads
706
Likes
132
Rating
5
P
Printablesskak76

Multifunctional Arm (Phone holder) reinforced

More durable design, changed the phone holder to another one.

Downloads
698
Likes
178
Rating
4
P
PrintablesPeter Farell

Bumble Snow Monster : Rudolph the Red Nose Reindeer.

Bumble Snow Monster: Rudolph the Red Nose Reindeer. The one thing about Bumbles → Bumbles Bounce. Tree topper Version Included. His teeth are bad. He really does need a dentist. Suppose I should do a Hermey

Downloads
694
Likes
183
Rating
5
P
PrintablesvmLOGIC

2. Bundesliga - alle 18 Vereinswappen 2023/24

English: This set includes the emblems of all the clubs in the 2023/24 season of the 2nd German Football League (Bundesliga 2). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…

Downloads
691
Likes
37
Rating
5
P
PrintablesLele88

Flexi Reindeer Rex Sleigh Santa Claus (with step file)

I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . I decided to remix this file by adding Santa's sleigh to it. An unusual reindeer XDXD Mi…

Downloads
690
Likes
186
Rating
5
P
PrintablesPotato Factory

IKEA Lack Table Angled Leg Reinforcement

Simply put, I've been using the non-mmu lack enclosure. I found the structure lacking especially in rigidity. Ironically the bottom table was fine, it was the top one that wobbled around. There also didn't seem to be a lot of angle…

Downloads
682
Likes
174
Rating
5
P
PrintablesLiouma

Tarmo5 MODS: reinforce all the frequently breaking parts

Tarmo5 is a great project by Engineering Nonsense. Now, my build is robust and powerful and also resistant to my son's driving skill. → if you are looking for my cover and wing, the page moved here :…

Downloads
680
Likes
100
Rating
5

Articulated Reindeer Christmas Bauble

Supports and Raft required, If using "Auto-Support" please make sure to remove any supports from "within" the articulated links to make movement of joints smoother and easier and to prevent any fusion.

Downloads
672
Likes
158
Rating
5
P
PrintablesJTxWölfchen

VW Golf 6 R Getränkehaltereinsatz cupholder

replacement for volkswagen golf 6 cupholder insert + R-logo

Downloads
658
Likes
53
Rating
0
P
PrintablesTheRealJocki

Tamiya TT02 TT-02 Versteifungsplatte | Reinforcement | Top Deck - LipoSaver

Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02

Downloads
658
Likes
53
Rating
5
P
PrintablesUFAB

Santa Claus on a sleigh with reindeer

Santa Claus on a sleigh with reindeer Print: Nozzle 0.40 mm Layer height 0.2 mm Infill: 10 % Support: I selected organically and placed it everywhere. Maximum print speed set to 100 mm/s. I used regular PLA. I left the reins on the sled…

Downloads
652
Likes
45
Rating
5