Search results: remake

F-35 Lightning (Remake 2.0)

F-35 Lightning (Remake 2.0). Model fixed upon suggestion.

Supportless Raven REMAKE - Halloween 2023

This new model, just as the previous one, requires absolutely no supports (just a good filament and nice cooling)! After my original raven model was so well received i decided to perfect it a little. I didn't like how the feathers on the…

Dragon Egg - Game of Thrones - GOT - High Resolution Remake

Original Post: 3d scanned by User @AgainstYou (Hans Peter). I thought It was super cool and wanted to make a big ones, but the resolution was too low. After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.…

Kar98k bolt action pen remake (replaceble cartridge, easy print, designed support, easy writing, durable)

Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…

Stormtrooper Lego Toilet Paper Holder Remake

My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…

F-35 (Remake)

Original print was flawed. I stitched the pieces together; since there were numerous complaints about the sections were not square and internal support structure pin was irregular. I made this one piece body and reused existing stabilizer…

My Wifes 38G Boobs - Remake available!!

Resident Evil Remake Samurai Edge (Beretta M9)

Modified the original M9 models to resemble the Samurai Edge pistols from the Resident Evil games

hot wheels ramp remake

hotwheels

R2D2 kit Card Remake: R2Q5 Kit Card!

This is a multicolor only evil version of R2D2 R2Q5! Prints with supports on any multicolor printer colors are red, silver, and black! THIS IS THE SEQUAL TO R2D2 KIT CARD!

Nintendo Switch Game Cart case insert Remake

This is only a remix insofar as reusing the measurements from the STL mesh. I finished remixing the STL but figured a new model would mean better adjustability. Added a lip for the cart holder Added a divot so you can press the cart to…

Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws (remake)

I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…

SW:Armada Falcon Pack HD Remake

Millenium Falcon Pack, HD remake for Star Wars Armada. Designed for resin 3D printers, for best result print at 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations…

Giganotosaurus Dinosaur Kit Card_Remake

Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.

Rsident Evil 4 Remake fighting knife

Second knife of the resident evil series i really wanted to make (i may just go ahead and make a bunch more) This time around i used some different tools from fusion 360 to make the bevels of the blade to keep the shape as authentic to…

Resident Evil 4 Remake primal knife

being a RE4 and RE4 remake fan, i really appreciated they inculded the original's knife as an unlockable in the game i also took the opportunity to practice knurling on a non-cylindrical shape, for the handle speaking of which, included a…

Prusa MK2/MK2S/MK2.5/MK3 R3 angled fan nozzle duct remake

This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward…

Xerses Remix/Remake - Kia EV6 Console Capacitive Button Cover

2025-01-26 UPDATE: I received a request to make one without the heated steering button so I added it to the 3MF and I created a new set for RHD vehicles, so there is a new RHD 3MF file, as well as the RHD STL files. 2025-01-25 ADDED A…

HP PRODESK/ELITEDESK SSF G2 HDD Cage Remake

A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…

Ada Wong RE2 Remake Poseable Figure

This is my first attempt at making a poseable action figure starting from an xps file and ending up with a printable stl. I am a big fan of the Resident Evil series and I decided to make this just after Resident Evil 2 remake was…

Asuna's sword! Lambent Light Remake! Correct size! (No rod! 100% 3D Printable!)

I am making the Elucidator and I saw this and was like "a metal rod ?!?!?!?!" so here is a 100% 3d printable version using pegs and glue AND THE CORRECT SIZE! Overall Length: 42.25 Inches Blade Length: 30.25 Inches. Here is the Og…

Rufus Shinra Fierce Pride Coin - Final Fantasy VII Remake - MSLA

Rufus Shinra's Coins used in his Bright Lights attack while fighting Cloud. Printed in resin on an Elegoo Saturn.

fishing lure - easy print - remake

hello there. this new version of fishing lure. have fun

Hive Game Derivative "Swarm" Remake & Multi material

I really liked the original design, but wanted to change some things. The shapes of the insects are copied from the original and these are the changes I've made. Please post a make if you end up printing these files, thank you. Changes:…

Ginger Bread House Remake for MMU2s

Ginger Bread House Remake for MMU2s. Original by Nakozen is here: https://www.thingiverse.com/thing:4689896.

Fairy Flower Remake

Infill: %10 Printed with supports - normal type Gold colour PLA Premium by Turkish brand Porima was used on mine

MiSTer Pi Compact Case (Taki Udon and Retro Remake)

The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout and the USB port beside the SD card cutout. Please see photos for details. To…

Bambulabs X1C PTFE-Bracket Extendet Simple Print Version *REMAKE*

I have here the Extendet Remake again Remake'd

Linksys Velop Wall Mount Remake

I downloaded this print...https://www.thingiverse.com/thing:2657972 and was blown away by how accurately it fit my Linksys Velop, but quickly realized that it was going to fail if I used the small holes provided…so I beefed it up a little.

FlashForge AD5X LED light Another remake

This is a modified version for the very common light bar used on Flashforge AD5M and AD5X printers. Includes a secondary cut-out so that desoldering will not be necessary. Also lengthened the ends to allow the 230mm long light bar to fit.…

Gap Fix - new Front & Roller Remake | 1-3KG Dry Spool Box - Ikea 365 10.6L

Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm

iPhone X Ultimate Dock Remake Solid 2

Edit 21-11-2019 - 20:25: Replaced with V3 in which some faces have been fixed so they are combined by using new lofts and an unknown floating edge preventing a single front face has been removed. I really love this iPhone dock made my…

Nano Leaf Replica Remake to get better Diffusion

A cool Replica. With great Software solution. Thanks For more information see the "Smart Nanoleaf Replica" Print instructions I made the leafs higher, so the light can get more diffus. So it is a remake of the hardware, the software is…

Elegoo Neptune 4/4PRO Cable Chain - z-mount remake

I would like to print the cable chain from Simin03 for my N4Pro, but I don't like the z-mount with all “Elegoo” print on allside, so I remake the z-mount from scratch based on official Elegoo Tool Holder. I use my remake z-mount .step…

Snap on CoreOne Extruder Fan Grill Cover - Remake of @IceCube Sol. cover design

A redesign of @IceCube Sol. “ Prusa CORE ONE/MK4 Honeycomb Fan Grill Cover (EASY INSTALL) ” where I created a modifier part along with the new design of the fan cover that is now snap on using the existing screw heads and the existing…

Prusa i3 MK2 Y-axis remake for bearing mounts

Y Axis remake for use with bearing mount All parts are based on original Prusa i3 MK2 design. Print instructions y idler requires support. y corners have support build into design. BOM: 4x LM8UU M3 nuts and bolts

Friday the 13th 2009 Remake Hockey Mask Strap Connector

Full scale model inspired by the hockey mask strap connector from Friday the 13th 2009. The model may need supports for SLA/FDM 3D printing! Dimensions: X 2.25144 inches Y 1.62577 inches Z 0.195313 inches FOR PERSONAL USE ONLY. IF YOU…

Grogu aka Baby Yoda Cookie Cutter (Remake)

Remake to make the cookie cutter faster to print and easier to clean (savings of 12 minutes print time at 0.25mm draft on Prusa MINI as well as much easier to clean dough out of). I'm including the OBJ/step files for the body that I…

MK4 Side Boxes (Remake)

Thanks to @VisualReversal for this great solution. I needed to reduce the length of the left waste bin, from 170mm to 160mm because of my webcam installation. As the org. stl-files (via 3mf) had only textured walls I imprinted a light hex…

Frog jibbitz remake

use supports but just on the overhang of the rock on the rock the frog doesnt require any. i used 15% infil and coloured it on the bambulabs slicer to make it look fantastic.

Baby's First Mace - Remake

I started a quick remake of this excellent design by dutchmogul only because having facets on a round object is a pet peeve of mine. Then, I thought, while I am at it I might as well make it print better without supports. So I made the…

Mystery Dragon Egg Remake

It's a pretty loose fit so don't think much printers will have problems, but print the test rings just in case. The bottom of the egg might print rough. Used tree supports for the overhang for the inside lip. The top part inside the egg…

35mm Film Carrier for Full Border Camera Scanning tailored for "JJC Slide and Film Remake"

I made a quick remix on Evan's design to work directly with the "JJC Slide and Film Remake" light that can be bought here at Amazon

Giganotosaurus Skull (Remake)

Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…

LayerThicknessVisualizer - Remake : Easy To Print and Paint

Thanks @Janne for your design ! I love it, but it felt a bit inconvenient starting at the first layer with the numbers, because they messed my bottom layer up… So here ist my remixed version. One solid file. Easy to paint in your slicer…

Ocarina of Time remake - Ocarina

These are a new neck and ring for the original ocarina to give it the look of the one seen in the new remake

Cactus Canyon Train Track Mod for CGC Remake Pinball Machine

Upgrade your CCr Special Edition to an LE with this train track mod! I added wood grain pattern to the railroad ties for a rustic effect. Prints and paints easily. Printing & Assembly: Printed at 30% infill and supports enabled (for…

Tigger Lego Toilet Paper Holder Remake

This is all based on the original toilet paper holder from vvk187: https://www.thingiverse.com/thing:1996077 That said, I actually used all the STLs from pugwash, as I liked the design with the hands that are retained and the solid and…

Heat Insert Press (Remake)

As I still had a couple of linear rails and guides from other projects as leftovers, I re-resigned this part of the press. Made some dimensions more “open” for more userfriendly assembly in case your printer does not highest quality in…

remaked hook for headphones to use with 300mm desk

used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…

Remake of Stryker M1126 Stryker ICV

This is a remake of the M1126 IVC. I opened the slats, they are see through now..

Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit

Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit. Original designer is koldo19

sptingtrap remake

isnt my model using it because other wont work

Competition Pro Remake Using Arcade Parts - STL Version!

UPDATE 10/07/24: STL version now available after being on my Patreon forever. The Competition Pro is a legendary joystick from the early 80s created by Kempston Micro Electronics, the same company that produced the Kempston interface for…

CyberPunk Ballisong Remake

Hecho con 3D Builder, Utilizando como referencia el modelo original Recomiendo para los pines los del modelo original y para el del seguro utilizar un trozo del propio Filamento ya que dará una mejor resistencia

Soldering Clamp Remake / Löthilfe

I like the simplicity of the original model. But it has closed clamps. So I designed one with open / flexible clamps.

REMAKE: Star Wars Revenge of the Sith DC15-EX hybrid rifle for 1:12 , 1:6 and 1:1 figures and cosplay

Remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the basis which hopefully makes it more accurate and…

Rudolph the Red Nose SNOWDOG Christmas ornament (remake with a hook)

This is my remake of Bugman_140's rudolph on which i added hook 😃 . Happy Holidays! If you wish you can donate on my ko-fi page .

Remake of Samsung Freestyle Projector screw

I originally found the model here on Printables ( link to original model ), and I want to start by giving a big thank you to the creator for the great work! 🙏 I've made a small tweak/improvement that helped in my own setup – maybe it can…

Firefly Last of Us - decorative remake of the logo

Modification of the logo from the game. Can be used as a wall decoration

Splendor Game Box Remake

I wanted a box that snapped together a little tighter and fit all the gem pieces. Liked the original quite a bit, love the space saving. For the best colored logo finish, I recommend printing with the logo facing up, with organic…

Remake of Tractor design found in tinkercad

Remake of Tractor design found in tinkercad Category: Toys & Games

Aya neo grips Remake(fits tightly in skull & co case)

I couldn't buy Skull & Co's grip anywhere. So I tried to make it into a 3D printer. But I didn't like any of the designs. So I brought an existing design and made a new one. The design concepts are as follows: With the grip attached, fit…

Meta Quest Pro Speaker Amplifiers Remake

Amplify the audio volume and low frequencies of your Quest Pro. Mount them, and you can easily decrease the volume slider by about 3–4 bars and finally hear the bass! Mounting requires no additional tools. Base variants:…

Soul Reaver Remake from Legacy Of Kain

Soul Reaver Remake from Legacy Of Kain full sword

Shelf Bracket ReMake

Made with stronger ends and larger mounting holes.

CamLock Female STEP remake

If you want to make proper, precise remixes of the main CamLock hose end, the author does not provide STEP or other proper CAD source files. I remade his design and am providing the STEP file for anyone to work from. The current model has…

Remake - Portable drill press for Makita Driver-Drills

Great design by @MazaaFIN which I adjusted to fit better with the sliding bearings I bought on Amazon. They where getting a bit stuck so had to ad another holder and additional heat sinks as well as new sled with a cut out for the lamp…

Biggs Hand Cannon FFVII Remake

Not for commercial use Hand cannon that Biggs uses in the remake of FFVII. Should be full sized and ready to print on 225x225 printer Not for commercial use Update: Missing section should be appearing shortly. I just added it into the…

3 score travel game (remake) now with mini version

Final update: I have completed the final version with the tray, notches, and made the sides of the trays thicker to make the stands not as flimsy. Quick update: I added notches to the game board (mini version for now) so you can slot it…

The head is easy to remake. Xiaomi Mi Band 8 charging station.

The STP file for remaking the mount for other bands is in a separate folder, along with the logo. If you need anything or have any suggestions, please send me a private message. There's also a stand for a Samsung band on my page. This…

Arduino Pro Micro Holder remake F3D

Deeper adjustable rail [0,3 mm] for stronger hold. Use FX in fusion to change parameter.

AMAZED board game REMAKE

I've been looking into 3D printed boardgames to print that don't excist otherwise for a while now. This boardgame looked interesting to me so i decided to print it. The original design and files weren't exactly what i wanted, so i…

Butterfly nut for M6 handle - nut location remake

Small remake of batterfly nut handle. Changed nut location. Now it is not on the end of handle, it is inside of it. Also maked handle little bigger, to be more strong. Instructions Printed with 0.8 infill Part was very strong Scad source…

Shinra PHS Cosplay Phone Accessory– Final Fantasy VII: Remake - FDM/MSLA

Make any cell phone into a Shinra Issued PHS! The perfect look for any Board Director, Turk, or S.O.L.D.I.E.R. Disclaimer: These PHS accessories are just for visual style and DO NOT protect a phone from any drops, bumps, screen breakage,…

Would Poop Here Again - Remake for Face Down printing

Designed to be printed face down as to get a textured design on it, but can be printed up if you'd like. Smooth or a fancy design that transfers over to the plate surface makes it pop better. Best results is face down with smooth or…

Dummy13 Head Remake with Compartment for Cables and Battery

Refonte de la tête de Dummy13 avec un compartiment intégré

Refill Spool MasterSpool V5 RichRap remake by 3D Tagraum

Das ist ein remake von RichRap der das Refill Filament von z.B. DasFilament, Fiberlogy etc. unterstützt. AMS kompatibel.

Thule load stop 314 (remake)

An additional Thule adapter with M8 thread and M8 DIN 934 nut must be purchased or made. In this example, the adapter is made for the Turtle Air 1 cross-bracket.

Triaxial Numechron Clock Remake (24h)

This is a remake of shiura's Triaxial Numechron Clock , which i did as a school project. Here is the main changes that has been done to the original design: The 12-hour wheel has been replaced with a 24-hour wheel. The numbers on the…

Cactaur 3d Figurine Final Fantasy 7 Remake

A touch of zany fun to your collection with this adorable chibi 3D model of a Cactuar from Final Fantasy 7 ! This iconic, quirky mascot is the perfect 3D printing project for any fan of the series. With its classic running pose,…

Poignée trottinette Freestyle (Odi remake) - Handlebar

Poignée trottinette Freestyle Mesure prise sur poignée de marque Odi. l'extrémité est volontairement bouché afin d'éviter de mettre des bouchons de barre. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…

Alien UFO Clock (Remake)

This is a remake of a clock I found on another site. I made it multi-colored, separated the alien head (to make it easier to print in a different color), and made separate pieces for the alien's eyes and the black dots on the clock face.…

Filament RunOut Sensor Remake PTFE insert

Filament RunOut Sensor Remake PTFE insert

Osmo-Mobile-7p- Case Remake

its a better and cooler case and better to print!

Prusa i3 MK2 X-Ends remake

I recently purchased some POM nuts from RobotDigg, but noticed they only had 3 mounting holes. Since I am running a custom MK2 clone, I wanted something close to the original with little modification, Enter the new x ends. This is a…

Stacking Texture Roller Organizers for CustomMiniatureMaker Only-Games.co Small Texture Rollers

I have put 3/8 inch dowels through the small diameter texture rollers made by CustomMiniatureMaker sold through/printed by only-games.co and I made these to organize and protect the rollers. These are stacking trays that keep them…

Phone Tripod Stand [(Improved) Remake]

The bottom of a sipmple Phone Tripod Stand.

Pull-copter rotor - remake

a few hints for designing: More blades = more weight, more thrust, more resistance Thicker rim = more weight Steeper blades = more thrust, more resistance Results: More weight = more energy, more flight time, more thrust or rotation speed…

Kenwood Disc Holder Remake for 6 Discs

Kenwood Disc Holder for 6 discs

Self-Watering Flowerpot Large Remake

This is a remake of my self-watering flower pot that i designed a while ago, as requested by one of my followers. This is one is designed to be more easily printed with a 0.6 and 0.4mm nozzle. It has a thicker shell that can be printed as…

Recreator3D Ender 3 V2 Fan Shroud Remake

Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…

Xerses Remix/Remake - X3D v3 AMS Riser Tool Holder

Custom tool holder for X3D v3 Hex AMS Riser - See the complete details below.

No-Support Remake of SAMLA Hanga

This is basically a remix of the SAMLA Hanga for storing filament in an IKEA SAMLA box. The original design was all one piece and required a lot of support. With my settings in Cura the original took 9.5m and time of 1:50. Plus there was…

Plantygon Remake with Fusion File

Credit to printfutura @printfutura_36661 https://www.printables.com/model/11351-plantygon-modular-geometric-stacking-planter-for-s Several years ago I tried redesigning printfutura's Plantygon since I liked the design and was curious…

Prusa MK3/S Einsy Ultimately ( REMAKE )

ITs FINALY HERE. My havy rebuild of Eisy Enclosure by KalleKnall. Its have several updates like a direct mount with Raspberry piW Zero2 to eisy bord. Check the UPDATE section for more info. I noted that original did not have enough space…

Remake of Slider for Soldering Iron Press for Threaded Inserts

Remake of Slider for Soldering Iron Press for Threaded Inserts to accomodate for 4x LM8U instead of 2x

Handles, Spacing Rings, and Stacking Organizer for CustomMiniatureMaker texture rollers

The handles attach to the rollers using 5/8 wooden dowel sections cut to size and glue; I use foaming polyurethane glue i.e. “Original Gorilla Glue” as it will fill the gaps nicely and form a solid bond. The spacing rings will be VERY…

LEGO Brick Ice Cube Tray remake mold for thermoforming

designed to be used on a MAKYU Multiplier (pressure former)

Fanatec GT3 v2 magnetic shifter mod Remake for QR2 Lite

everything was printed in 1 color so not very clear to see they work great! micro switch i used was: Micro switch KW10-Z6P075