1 / 5
The head is easy to remake. Xiaomi Mi Band 8 charging station. — image 1
1 / 5

The head is easy to remake. Xiaomi Mi Band 8 charging station.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The kit includes an STP file that can be easily modified to fit any bracelet.

Rating
3.333 / 5
Likes
10
Downloads
66
Makes
3
Views
394
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

   The STP file for remaking the mount for other bands is in a separate folder, along with the logo. If you need anything or have any suggestions, please send me a private message. There's also a stand for a Samsung band on my page. 

   This project was made a long time ago, and I didn't post it for a long time because I didn't have time to prepare, check, and finalize everything. After buying the Mi Band 8, I went to see what others had done for it, but I wasn't satisfied with the quality at all, so I did better (that's my opinion!). I took the concept and developed everything from scratch, reworked and expanded this project, and am ready to post the final version.

There are two options: a horizontal or vertical bracelet stand. You can assemble the one that suits you best using parts 1-4. 

  1.  Stand (base) 
  2.  Stand head (insert the charging connector here) 
  3.  Covers to cover the wire (placed at the end) 
  4.  Logo (for multi-color printing)

Print! 

   Print the outer perimeters with a layer thickness of 0.4 and a height of 0.1 or 0.2. Optimally, three walls. Set the infill of the base of the stand to 100%, and the rest to 10-20%.

Miscellaneous Parts #2: 

  1. In STP format for those who want to repurpose the stand for a newer or older version. 
  2. With a lip for horizontal placement of the bracelet. 
  3. With a bevel, for bracelets with a strap that is thicker at the base than the original. 
  4. The widest part is for those wearing a bracelet with a silicone case.

Assembly Vertical stand. 

   First, insert the end of the cable into the head (2), then insert the cable into the channel of part 1 from above, pulling the cable until the head snaps into place. The head is inserted with some force to ensure assembly and disassembly without glue; check parts 1 and 2 beforehand. Then, insert the cable along the entire channel and close it with plug 3. 

Assembly  Horizontal stand. 

   Insert the end of the cable into the head (2), connect the head to part 1, and secure the cable in the channel. Then remove the head (2) by pressing down on the end of the charging cable to prevent it from wrinkling. Slide the plug (3) into the slots and bend it. Then, replace the head (2) by inserting the end of the cable into it.

Tags