ridged print in place hinge
V1.1: redesigned to print it flat on the build plate to make the axis more ridged. Therefore i added more material to avoid need of support and increased a bit the gaps.
- Downloads
- 1,522
- Likes
- 208
- Rating
- 5
Counting matching models…
V1.1: redesigned to print it flat on the build plate to make the axis more ridged. Therefore i added more material to avoid need of support and increased a bit the gaps.
This isn't a scan, it's a symmetrically beautiful 3D sea shell created from scratch in Fusion 360. It has a number of detailed ridges, has a hollow interior which prints without supports and is great for seeing how smooth your printer…
One of several custom lamp shade designs for the ikea Tarnaby. This one has attractive vertical ridges for a retro look. Works best in slow hot printed transparent materials for that nice and clear look. I printed mine in transparent pla…
Simple and aesthetic pots, with a ridge pattern. One large and one small.
This is my 3rd helmet for the dummy 13 bug I got bit by :) I tried to make it a bit more visually interesting with the geometry at the sides, and it is pushing the 0.4 nozzle I think. You have to make sure the extraction/wall width is…
This is a bridged replacement stand for building bridges with Carrera Go! 1:43 slotcar race tracks. It's an extension for https://www.printables.com/model/1078709-carrera-go-stutzen-pfeiler-pillar-support-for-143 . It is possible to…
No screws required, 2 clamps are used instead to hold the 2 enclosure parts together and also serve as feet. Steps to assemble: 1. Place the board into the bottom of the enclosure. 2. Place the top of the enclosure over the bottom one. 3.…
Various size reducer attachments designed to fit on my Ridged Shop Vac Draft angle measured from actual tool for a compression fit. Print fast if you want, no supports or complex geometry. I wanted the 0.5 inch internal diameter to suck…
If you are looking for a teardrop design, it can be found here: https://www.printables.com/model/912783-squash-racket-teardrop-or-open-throat
An organic sculpture with flowing branches and ornate structures. If you collect or download, please Like this file. Print Settings Rafts: No Supports: No Resolution: Hires Infill: 16% Notes: Designed for no supports. Print as large as…
These provide a little bit of extra grip and actuation for the rear buttons by provided small ridges to rest your fingers against. For my large hands, I've spaced the ridges a little farther apart since my middle finger tends to sit high…
🐣 Design Concept Celebrate the beauty of spring with this Ridged Easter Egg! 🌸 Its ridged egg shape is enhanced by elegant, evenly spaced grooves that give it a modern and decorative look. 🌼 Purpose Perfect as a standalone decoration for…
Some more versions of the my threaded box. The box is 50mm across and 30mm tall. Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10% Category: Containers
Print one of each part, paint and glue together. Stand files included. This post contains material that may be copyrighted by another rights holder, however as this artwork is transformative in nature and intended to be shared for…
A cup I designed to hold my remotes on my entertainment center. Some ridges add an interesting visual detail. Looks great in wood PLA.
procvičte si prstíky při výměně filamentu. jednoduchý tisk který ne každá tiskárna a filament zvládne :/ *** practice your fingers when changing the filament. simple printing that not every printer and filament can handle :/
These Christmas ornaments can be printed in most materials, but I find that transparent PETG in various colors looks beautiful in the illumination of Christmas lights on the tree. For best results, the ornaments should be printed with 2…
Printed in PETG with 15% Gyroid infill, other settings would probably work. This print did hold water but I have printed other planters that did not so your experience may differ. I have had good luck sealing others with silicone caulk,…
If the size doesnt fit, scale it a bit, but leave the height the same (or dont your choice).
Start here Choose your kit: 4 tools (1–4) or 8 tools (1–8). The table below is the complete printed-parts list for a simple, single-colour build with plain front plates. Print the quantities shown, then follow the shopping list and…
Another version of my 50mm threaded box. The box is 50mm across and 30mm tall. Print Settings Printer: Micromake D1 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.25mm Infill: 10% Category: Containers
Print as oriented, no supports or brim needed. Draft angles taken directly from the tools, works with a compression fit. The sander has a locking mechanism but it stays connected with compression so I probably won't redesign it.
A full set of number stencils 0–9 , each on a rigid 60 × 80 mm sheet. The enclosed parts – the middles of 0, 4, 6, 8 and 9 – are held by short straight bridges, like classic stencil lettering, so nothing falls out and the sheet doesn't…
A scraper for your print bed to help get items of of the bed.
Even with brimming my parts were failing. Adding a bridge between the pegs helped stabilize the objects and reduce likelihood of failure.
Twist half a lemon, lime or orange on the ridged cone and the juice runs into the dish; a slotted ring round the cone holds back most of the pips. Pour from the notch. DETAILS • 55 mm reamer (lemons and limes; set 75 for oranges) in a 115…
Key Features Tiered Visibility: Unlike traditional flat storage boxes, the slot system is engineered to hold the cards at a precise parallel tilt. This tiered, staggered angles ensures that the top edge of every single card remains fully…
A coaster with ridges to not stick to wet cups. also has smiley face design because i thought it was a bit boring.
The Problem There is nothing more annoying than dropping a perfectly good water bottle and having the plastic cap crack or shatter. Instead of throwing the bottle away, I fired up the 3D printer to create a durable, watertight…
a simple TPU adapter for attaching sa 2.5" (nominal) Rigid Shop VAC hose to the dust shoe attachment for aMAKITA router powered CNC. Apdapater fits on OUTSIDE OF both vacuum hose and dust shoe port
🐣 Design Concept Celebrate the beauty of spring with this Ridged Easter Egg! 🌸 Its ridged egg shape is enhanced by elegant, evenly spaced grooves that give it a modern and decorative look. 🌼 Purpose Perfect as a standalone decoration for…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== This is for e26/e27 lightbulbs. You require a hanging light cord such as this: https://a.co/d/dKbt8kF You must use an LED lightbulb. 6-12% infill 5 top layers 2-3 outer walls.…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== File Dimensions and Minimum Print Area X/199.90mm x Y/199.89mm x Z/198.95mm This is for e26/e27 lightbulbs. You require a hanging light cord such as this:…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer walls. No supports. Scale to desired height. ====================== MODERN MACHINE© STL files are strictly for personal…
COMMERCIAL LICENSE PRINT INSTRUCTIONS • 8-15% infill. • 6 top layers. • 2-3 outer walls. • Scale to desired size. • Supports not used. MODERN MACHINE© STL files are strictly for personal use. Unauthorized resale of these digital files is…
It's mainly a decorative object. It's not supposed to contain anything other than dry flowers. This vase is to be printed in PLA. Its size is 187mm height and its max circumference is 95mm. For those who are wondering which PLA I used on…