RotorRiot Vision40 Prints
Print files for the Rotor Riot Vision40
- Downloads
- 1,904
- Likes
- 107
- Rating
- 5
Counting matching models…
Print files for the Rotor Riot Vision40
Since there isn't a riot shield for dummy, or at least isn't a good one, I decided to make one myself.
Be careful when removing supports on the right arm, it is sort of weak and can break easily.
Color change is as follows navy blue, red, gray, white.
I made a nice bottle holder for the Thule Chariot. This one is made for 75mm bottles/cups but if a bigger is needed its easy to just adapt the size. The two parts i but together with threaded inserts for god strength and ease of printing.…
A remix of Denste17 's bike mount, which is also a remix of Florian Z's (Weberflo) Multihalter für Thule Chariot . My remix is based on another remix by Philipp Unstoppable (allXages) who added a PLA Version . Denste17's Mount…
FALLOUT NEW VEGAS ELITE RIOT GEAR
Das ist ein Haken der für die Thule Produktreihe (Urban Glider 2/ Chariot Sport / etc.) funktioniert. Im Gegensatz zum Original ist er etwas größer.
When children begin to ride their own bike, they sometimes get tired quite unexpectedly during cycling tours or walks. Therefore you need to have a possibility to transport their bike when they change into the trailer. So I made these…
Should be able to be printed as is you may need to scale them to fit on the print bed.
Official 3D print files for the Skyliner MK3.
I wanted to make a Police shield that looked a bit more modern and came up with a few designs both with and without viewports. I also wanted to add ‘lighting’ like many shields nowadays seem to have so I present to you some options. My…
It's a riot gun model I made from reference pictures. It takes around 6 minutes to print, so instead of hopping on Valorant and try to queue up with a dev just print it out! (: I used standard settings so if you want it to look a little…
Pay attention to the naming of the file - it has clues as to which antenna/camera/tilt degree... The core, blaze, and OCP antennas are upgraded TrueRC Antennas that can be purchased separately. Update: the extended O3 DJI camera mount is…
I made this suit/suits awhile ago and was never really satisfied with how it came out and kind of forgot about it. Few days ago I was digging around some of my old work looking for some reference material when I stubbled across this once…
Resolution: 0.12 layer height Notes: Printed at 0.12 layer height Print 2 sets of the fist for a full assembly I would suggest standard supports for the base piece in the slot for the extension Place a small dot of super glue in the holes…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Blériot XI This is another plane for your collection : the incredible Blériot XI, the…
This modified version of my Patriot Exosuit has been updated for quality of life. While it has lost some detail on the back, it should generally be a more pleasant process for folks. Enjoy!
Holder designed to clip on the Thule Chariot top aluminum extrusion. It's a two parts design. The clip and the bottle holder. Work great with Yeti 30oz rambler and Takeya 22oz and Takeya 24oz water bottle. The mug holder work ok for Yeti…
Doporučuji tisknout dnem vzhůru a vytvořit podpěry na háčku. Nejlépe tisknout z PETG či ABS(ASA).
Official 3D print files for the CL2.
Patriots logo, ideal decoration for your office, or desk, or fan exhibition.
I made a tray attachment to Thule Chariot for easy access to things like phone, glasses. I have used M3 insets (CNC-kitchen) in the Profile mount to attach the frame to it for secure mounting but you could glue it with CA glue, the bottom…
Official 3D print files for the Moxy.
I created these two different New England Patriots inspired coasters. Each style requires 4 colors and preferably an AMS system to make the swapping colors easier. These were printed on a Bambu X1C using Bambu Black PLA, Bambu Matte White…
This was designed to be sliced and printed on BambuLab printer with AMS to switch between the red, white and blue filaments. Tip: print multiples on the same plate in less time and with less waste than you could print one at a time! ~16…
An updated version of my Twin Tower and WTC Marriott Models.
Mounting: place AirTag inside and snap it under the “center” bar - model has little protrusions that should prevent it moving back and forth Printing: PETG or something more heat-resistant - after a bit of summer riding PLA one deformed…
please leave a review if you like this model and let me know if what you would like me to make next update 3-27-24: i added a police shield variant how to assemble shield
Summary Edit: I uploaded the repaired version, which is exported from Prusaslicer after running the auto-repair function. Please download that to avoid possibly broken model. Sorry if this caused you any trouble! Tips: See the comment…
This model is double sided, meaning it has the Valorant “V” on 1 side and the fist on the other. may be a little tricky to print, but you can remove the V in the slicing software you are using. Cura is easiest to do this in.
Moin Moin, here is my New England Patriots logo. Have fun with it! :) Print settings are: Nozzle 0.4mm Layer height 0.2mm Filling 20% Walls 3 Lid top + bottom 4 ________________________________________________________________________ Moin…
New England Patriots Oversized Necklace Logo that I designed. I hope you enjoy!
This is a multi color version of my patriot exosuit!
Basados en el modelo de Philip Treml .Proyecto de los alumnos Petitti Camilo, Suarez Natalia y Valenzuela Ailin de la Universidad Nacional de Hurlingham. Modelo con mejoras. Este modelo fue modificado, hacer pruebas de tolerancias y…
This hook attaches to the top of Thule chariot strollers and provides additional hanging point if you need to quickly put somewhere a jogging wheel or groceries bag, etc...
Simple one sided Xmas Ornament with varying heights for multi-colored prints without having MMU. In Prusa Slicer, select “Apply Color change automatically” to add color change breaks at .80 / 1.4 / 2.0 mm (using .20mm slices) and have…
Official 3D print files for the Skyeliner HD.
If you’ve lost or broken the original light mount (Thule part no. 1500055273), this 3D-printed part restores the ability to attach the LED rear light securely to your child trailer. It clips onto the rear frame bar and holds the light…
Introduction Riot! is my answer to “I like Blitz but this event's cap is 200fps”. Utilizing Quickdraw motors and Manshee wheels, this blaster comfortably hits 200fps on 3s and up to 220fps on 4s (though your ears may not love you for that…
I wanted to make a New England Patriots logo, but my printer only has one extruder, and I didn't want to buy 4 more colors of filament. The parts fit together with friction, but I used a dab of super glue to hold them in place. There's a…
All files in this collection belong to Bubby FPV. Please show support for the original creator.
These models were quickly put together to meet Super Bowl 60. The diameter of the hole on the ring is 0.875 inches, scale if need be. GO PATS!
New England Patriots 1st Layer Silver 2nd White 3rd Blue 4th Red
Perfectly constructed and detailed MIM104 Patriot Launcher, this small-scaled model is ideal for war and battle tactics simulation or sand table modeling. With its subtle yet stunning details, it's incredibly easy to print at home or in…
I kept loosing the padlock so did this to keep it in place when not in use. The hook is slightly modified since the photo was taken. Both are printed with Prusament Petg
This South Pointing Chariot model illustrates differential gearing. For more photos, and a complete article including design details, see my blog: http://keveney.com/posts/south-pointing-chariot/ I've updated this model. The new version…
This is a part separated version of my Helldivers 2 patriot exosuit
Mount for Garmin Varia rear light, designed to fit on the Thule Chariot top bar. You will need to purchase the mounting plate for the Varia (I got mine from Temu ). The plate is secured to the printed part with two M3x10 DIN 912 screws.…
It is a fantastik 3 d printet logo!
Fins to fit older riot kayaks 1. 2" fin 2. 2.5" Fin 3. 1.5" Knubster 4. 1" Wake fin
This set contains a lot of stuff to pimp your Thule Chariot trailer. Some of the stuff might be obsolete if you own a new(er) version of the Thule trailers, so always check if the add-on is appropriate for your trailer. All the light…
Official 3D print files for the CL1.
Summary I made few small hooks that are mounted on a wall to hold accessory for Thule Chariot Sport stroller. This makes the storage of the entire stroller a bit more tidy in a garage as the equipment is otherwise laying all over the…
Dolly (or trolley ?) for medium size glider in towing mode. Chariot de remorquage pour planeur petit et moyen 3mm diam for the wheels steel shaft inside a 4mm brass tube / Axe en corde à piano de 3mm dans un tube laiton de 4mm I added a…
This is a remake of my 3 string instrument called the Triotune. It is very similar to a soprano ukulele, minus one string. This is designed to be modular, so you can swap out parts to fit your needs. There are three necks to choose from…
Join the ranks of the legends by printing this glorious tribute to bravery and sacrifice! These 5 shining stars and the powerful Outstanding Patriotism message immortalize the excellence of a true Hero of Super Earth. Perfect for…
NCR Elite Riot Gear in pieces, only the V2 version if you want the other versions make it yourself
Iconic Movie Moments - Ben-Hur - The Chariot Race - 1959 3D printable model.
Two parts adaptor for lenses M39x1 with lock ring for Durst Enlargers. Simple to print without support, also you can glue it together but its not necessary.
Custom Rotor Riot themed gimbal/stick protectors for FrSky Taranis Q X7.
Using the Rotor Riot logo to protect your FS-i6 sticks Inspired from http://www.thingiverse.com/thing:2073993 but redrawn from scratch, using logo and joined together with a bridge as I prefer those style designs. It should protect the…
Summary I made few small hooks that are mounted on a wall to hold wheels for Thule Chariot Sport stroller. This makes the storage of the entire stroller a bit more tidy in a garage as the stroller is way smaller without the wheels. Also…
Can be printed in ABS or PLA just fine, no supports needed. Photos using a 0.4mm nozzle and 0.2mm layer height
It is a part that remodels Kyosho's mini-z 4x4 into a Netflix version lost in space chariot with a 3D printer. Feel free to support me at: https://buymeacoffee.com/andcraft3d For assembly, please refer to the stl data and video in…
This is my 3 string instrument called a Triotune. It is similar to a ukulele, guitar, cigar-box guitar, balalaika, or Appalachian dulcimer. This instrument is modular so you can customize and swap out parts to fit your needs. The new…
This is a table center piece I made for Superbowl LII. It prints in 4 separate colors and assembles by snapping the pieces into the blue main part. Tolerance used is 0.3mm. Meant to be printed in 0.2mm Print Settings Printer: Creality…
Here is the New England Patriots football team logo for 3d printing. No need for multicolor or AMS. Change filament at the following layers: -Start with white -Change to blue at layer 10 -Change to gray color at layer 16 for the face…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 Please follow the txt instructions for pauses and filament changes. You can resize, but do not resize the height.
Introducing 'Patriot's Creed Illumination'—a stirring light box embodying the resilience of 'We the People' since 1776. The powerful statement, 'We were not ascended from weak men,' serves as a bold reminder of our shared history and…
Je voulais remplacer le moteur d’origine par un moteur 500w, j'ai donc modélisé un nouveau support moteur compatible avec mes butées limites de mon chariot X.
Summary Remix of thing: https://www.thingiverse.com/thing:4484227 for lamp ( https://www.amazon.de/Smart-SMART-LED-Batterier%C3%BCcklicht-Star/dp/B01M01OIYL/ref=cts_sp_3_vtp?tag=tv-auto-20 ).
Kerberos Panzer Cop riot shield from the anime Jin Roh for custom 1:12 scale 6 inch and 1:6 scale 12 inch figures plus 1:1 scale for cosplay. I may do more Kerberos stuff in future as I gradually tick projects off my to make list. I also…
Replacement Axl for Playmobil Roman chariot. I've made 4 different sizes because I noticed with different filament and printers, the fit was a little to loose or to tight.
Official 3D print files for the HD1.
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
A 1/100 Anti Material Rifle For Mecha Model Kits Scaled For 1/100 Mecha Kits (Master Grade Gunpla, Reborn 1/100/ 1/100 Full Mechanics Gunpla, Etc) Print At 20% With Normal Supports Remix Of:…
This is an update to my South-pointing Chariot project. For completeness' sake, it includes all the unchanged files as well. Full details on my website: https://keveney.com/posts/south-pointing-chariot-updates/
Keep your cell phone and note pad safe and organized with this patriotic bald eagle holder. The intricate design features the iconic symbol of the United States and can easily hold your device. The holder is perfect for those who love to…
Chariot CX Ski Kit Axle Adapter for drum brake models.
To apply this update, you must first perform the following "Lost in Space Chariot /MINI-Z 4x4 Body". https://www.printables.com/model/794624-lost-in-space-chariot-mini-z-4x4-body Also, please enjoy remodeling such as SCX24 and FCX24 of…
I wanted to use simple buttons to make the end stops of my 3018 Pro cnc. So I got into modeling.
Just the New England Patriots Logo by pieces, so you can print each one in its color.
This is remix of bike light mount on Thule Chariot. This remix is more robust as you can see on picture (right = original, left = remix)
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
New England Patriots Koozie. If you print it make sure to post your make I would love to see it!
This version will not be updated anymore. If you want the most recent version, check version 4 out here: https://www.printables.com/model/343896-playable-3-string-ukulele-like-instrument-v4 Credits: /u/Berkbig77 for helping me figure out…
Printing instructions: Material: a non-brittle material (i.e. not pure PLA). Layer height: 0.28 layer height for Ender3 style printers Perimeters: use 4 perimeters Infill: 100% or set bottom horizontal shell thickness to 2mm Print…
I bought the velcro straps from Menards and the hardware from Ace hardware. Its very adjustable for any sized users. I recommend 30% infill if PLA, Also, print on its side for maximum strength. Also depending on the size of your printer…
The original holder didn’t work well for me, so I decided to design my own version to hold the bike more securely. I finished this model just a day before our bikepacking trip, and it performed excellently throughout the journey. This is…
This is a remix of the Arm Protector for the Rotor Riot TANQ 1 and 2 as the arms are the same. Got tired of chopping and having to resolder my Fly High FPV LED strips everytime I got in a good crash. Clear TPU actually disperses the light…
Just an other Gimbal protector for Graupner MZ12 / MZ12 Pro and other Graupner Transmitter. No Remix, completly new constructed with OnShape STLs for singlecolor print and MMU-Print included Print instructions Category: R/C Vehicles Print…
Iron Patriot Helmet from someone over on Thingiverse. They posted this helmet in small pieces for smaller 3D Printers, but for the people that want bigger pieces, these files are designed to be in big sections for medium 3D Printers.
I have received another request for a character from the anime series - My Hero Acadamie. This time it is Eijiro Kirishima (Red Riot). As always I am including a copy of my basic "Sugar Cookie Dough" recipe. Print Settings Printer Brand:…
Replaceement for original Chariot CX part, for mounting the Ski Kit on the Axle. For drum brake models. Printed with 0,16 layer height, 3 perimeters and 40 % gyroid infill.
A Small Hotel in Between Two Towers