The Rock Croc Charms Small
Credit to original creator: https://www.thingiverse.com/thing:5166677
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
- Downloads
- 4,177
- Likes
- 260
- Rating
- 4.73
1,689 models
Credit to original creator: https://www.thingiverse.com/thing:5166677
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Low Poly Heard with arms and legs
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
The dragon coins feature dragon scales on one side and a dragon wing on the other. You decide which is heads and which is tails. They are perfect for upgrading cardboard tokens from games like Wyrmspan. I designed the coins in Fusion 360…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Better than cardboard Wyrmspan Resources Wyrmspan is a 1-5 player game from Stonemaier Games where you build and explore a cavernous sanctuary for dragons, based partially on the popular game Wingspan. I have created 3d printable versions…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
2023.01.28 EDIT: I have uploaded millimeter based .OBJ files under “Armskore Coil Gun Pistol V2” and added a better stand for the prop under “Baseplate Assembly V2 Slim” folder. I designed all parts to be as 3d printable as possible with…
Print approx. €4.80–€5.86 excl. taxPreliminary estimate for one variant
The last time I played Wyrmspan with friends, we ran out of eggs near the end of the game and had to scramble to use substitutes. (I'm not good with the multiplier tokens) So I decided to create a simple 3d printable one similar to those…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
These creepy hands are nice decoration when on the base. When attached to the handles, they can be used at Halloween, in cosplay, and also make good back scratchers! If you like these cool, err I mean creepy hands, check out this dice…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Set of Lego platforms with sizes: 1x3, 1x4, 1x6, 1x8 and 1x10. Details are printed upside down to minimize print defects. Print instructions All models are designed to be printed upside down with supports to minimize print defects.…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
New Versions : with holes to easily push out cards from the back with and without risers to make it easier to pick up the cards I created this model based on a suggestion/desire expressed on facebook. The card holder is designed replace…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A lovely fan which offers a cooling breeze that can be fully 3D printed (other than the motor, battery, and switch). Makes use of a snap-ball-joint system to create three articulating arms which can be conveniently flexed in a myriad of…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
I created an adapter that allows you to mount normal M8 threads on the Original Prusa spool holder ( https://www.printables.com/de/model/511105-m8-adapter-for-original-prusa-mk3-spoolholder ) . So I was able to attach the Universal…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
The heraldic emblem of the Ronov Family (Lords of Leipa), which is used by Hans Capon (of Pirkstein) and his uncle Hanush of Leipa in the game Kingdom Come: Deliverance (and KCD2). The dimensions of the object are approximately: 28.56 x…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Use these 1250 names and words on your Coolermaster Qube 600 housing to customize it! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Just print the…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Printed in PLA with a prusa MK3S 0.6mm nozzle, with Makers Muze its speeds settings. It cost some quality, but gave the result within 10hr. I integrated two M8 nuts and two M8x100 screws. To complete the hand screw I added some general…
Print approx. €21.22–€25.93 excl. taxPreliminary estimate for one variant
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for PETGSource material: PET
Logo of RuptureFarms from the game Oddworld. To print the base you should add a color change step on the right layer. Then you can print the head separately and glue it to the base.
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Token, egg and card container for Wyrmspan game, fits into original box alongside other game boards and cards
Print approx. €13.17–€16.10 excl. taxPreliminary estimate for one variant
A 3d model of Portugal's official Coat of Arms with an extra handle so it can be used as a keychain. I really like the coat of arms thats present in the flag but didnt really find any model already present besides the medieval(very…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
These are display models of Musellifer profundus Vivier 1974, a deep-sea gastrotrich. This worm is frequently encountered in the vast plains of the ocean bottom, from shallow coastal waters to the deepest depths. Members of this species…
Print approx. €2.02–€2.46 excl. taxPreliminary estimate for one variant
This coat of arms of the city of Katowice was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for one variant
Vertikální grip na zabraň M16 od značky SPECNA ARMS konkrétně modelu SA-A90. Grip je dělán pouze na předpažbí tohoto modelu, tudíž nezaručím že bude pasovat na jiné zbraně a jiná M-lock předpažbí. Grip je velice solidní drží krásně na…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for PETGSource material: PET
The model is a tactile coat of arms of Darłowo, a city located in Western Pomerania, Poland. How to print We recommend printing it at a side, with raft and supports. Alternatively, it is possible to print using 0.25 mm nozzle, but the…
Print approx. €21.15–€25.84 excl. taxPreliminary estimate for one variant
This a name tag for each team of the WRMS Robotics Club.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Worms Armagedon Logo, to print, sources included maibe you can do more better. You can print white and paint or use MMU3 😎 Scale 69%, fit to print.
Print approx. €7.23–€8.84 excl. taxPreliminary estimate for PETGSource material: PET
Molds for creating Christmas charms and decorations with terrazzo technique using cement and porcelain materials for casting.
Print approx. €2.35–€2.88 excl. taxPreliminary estimate for PETGSource material: PET
I have printed the extremely popular articulated lizard many, many times. Its my kids favorite item I have printed for them. https://www.myminifactory.com/object/3d-print-articulated-lizard-98192 My kids also love axolotls so I searched…
A quick break from my usual stuff to get a few teachers mad at me. Pencil Polearms is a collection of seven pencil toppers that turn your writing implements into weapons of war. Included are a halberd, poleaxe, double axe, partisan,…
There is not much to write about this ship. World famous and unique to this day. The RMS Titanic is my first ship of the 1:1000 series. This is how history comes alive and can be touched. I have given this model a stand and hope that it…
Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…
Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…
Looking at all the Dummy 13 addons available made me feel like a kid picking out cool new parts for a LEGO Hero Factory set as a kid, so I wanted to add to the mix one of my favorite parts of those sets - HUGE ARM CANNONS! Megaman,…
These are customizable arms and knobs for the Modular Mounting System, similar to GoPro's Three-Way Pivot Mounting System . The design is entirely based on the Modular Mounting System Arm V4 ( thing:3689842 ) by jtronics but it uses the…
This is a remix of articulated Gorilla tag figure by @willrollup_223686 . I had trouble printing the original model due to an issue with the forearm being fused to the upper arm . Half of my attempts to loosen the fused pieces resulted in…
These files are for printing a replica of Johnny's pistol from Cyberpunk 2077. All parts were designed to be printed in resin. A mid size printer such as a Saturn or Mono X are required for some of the larger parts. The finished prop…
Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…
My version of Minecraft's character Steve. With articulated head, arms and legs. Easy to print with minimal supports. The model is quite big but can be scaled to any size. I printed one at 50% and a small one at 33% scale. The joints…
Chickens not included! This is not original with me - just a print I made for someone from the file here : https://www.thingiverse.com/thing:4614774 Print instructions Print in PLA using the 3mf file provided; otherwise : 0.2mm layer…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
Update 1-6-26 With the combinations of mats and sleeves and expansion, what to print is confusing. Here's a chart to help: Update 10-22-25 I have made new files that allow for storage of the Dragon academy cards, tokens and other…
this is an upgrade of ''dummy13FANBOY'' version including a revised version of the frame and new upper and lower armor parts to fit an extra set of arms. I added flat spot on the second set of joint on the frame for easier printing and…
I recently printed a similar design to this, but it was a single print design. But all of the joints failed when printing, as they were printing in mid air within the model. So i designed this from the ground up. After some post printing,…
please leave a review if you like this model and let me know if what you would like me to make next
Wyrmspan, a Wingspan game, takes the core elements of Wingspan and adapts them to a new theme for a familiar but fresh experience. This insert is primarily to assist with setup and teardown and includes a card market tray that can be…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
Prebuilt copies and kits in the future are available here: https://www.frontlinefoam.com/product/the-mhp-lmg/ A nerf dart blaster that uses flywheels and a metal TT gearbox to feed and fire darts from a disintegrating belt. Currently…
A simple mod that gives Dummy 13(or anything compatible with it) another pair of arms. Kinda like a sorcerer from thousands of years ago in Japan….. Please print this with a strong filament, with PLA I had to reprint this a couple of times
God, I just need to release these. I'll keep iterating on them forever and never get them out there otherwise. THE NEW AND IMPROVED BLASTER ARMS ARE HERE! READ THIS: ALL of these guns are designed to be printed vertically; I personally…
Feeling Bound by the Grid? I love the Gridfinity system by Zach Freedman but find that my Prusa Mini is limited to printing only 4 units in either direction. I thought I'd make a sideless bin and platforms so I could make bins larger than…
Update: I've got a newer version to print parametric support-free breast forms! Check it out here! Update: 9/7/25, V2.2 Here's a slightly wider, but less taller version of the form that also works without supports, and came out rather…
Alfred is flexi! Enjoy!🔥 The Worm Gang is a series of toys for boys and girls, quick and easy to print, suitable for gifts and to brighten up your days. Collect them all! Commercial license Do you want to sell prints of this model? You…
Halterung Abspannleiter Vorzelt für Tellerkopfschrauben Filament: PETG or ASA Settings: 7 Wände und je 7 Boden und Toplayer, Infill: Gyroid 42% Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I…
To replace the arms of your glasses ... maybe this model can do it (and save you the time to go to the optician) :D Print in less than 20 minutes @ 0.15mm Remix from “ericsko” tuned with onshape
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
The new Carbon 13 figure is great, but the exposed connector in the torso was bothering me in an otherwise completelly smooth figure. So I decided to adapt the torso from the Frame Arms compatible kit I had published previously, with…
Iron Spider arms for L13 using parts from RxR's multi joints. Edit: Need a villain to battle against? What about Doc Ock ? My little human loves Spiderman and has always been excited about the Iron Spider arms from the movie. So when I…
For the small version of the excellent "multifunction arm mounting system" there is a remix for a more stable bracket that allows heavier objects attached to the arm. I wanted to attach this bracket to my IKEA "Kallax" shelves (~38mm).…
doctor octopus arms that attach to dummy 13. I used 33 ball joints not including the weapon connector, but you can you less or more. 10/3: I added 4 ball joint connectors so it's much better and added sword holders for the swords from my…
After printing some Pokemon sitting on rather flat platforms it became clear that this wasn't suitable for the balance game. My kids thought they were cool but gave up on the game and just played with the figurines. So I set upon making…
All new designs! Three different heights, and three different bottom designs. Printed at 0.16mm layer height on my Bambu Lab P1P using PolyTerra Matte Charcoal Black: https://amzn.to/3F4Dv7d Heights: 15mm 18mm 21mm Bottom design: 45…
This is my North American Arms (NAA) mini revolver model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
UPDATES August 22, 2024 - NEW 2 Cent Euro I've had a couple of folks show some makes using the 2 cent euro where they had to scale the model a bit to get it working. I've updated my model to allow me to more easily add different coin…
This is my take on Wyrmspan resources. I wanted to resize the original pieces so they were all roughly the same size, but ended up remodeling most of them from scratch so I could adjust their shape as well. The gold bar is modeled after…
Articulated Axolotl With Articulated Arms and Legs
Para los antebrazos hice las piezas.2x marco espi n,2x armadura de rodilla v2.stl
A Fully encased forearm and Shin for Dummy 13. New simple Look Fully covers arm/leg frames Snug fit (If print fails in the vertical position, print horizontally on the bed)
This is a beta version You can find the joints part here : https://www.printables.com/fr/model/169928-multi-joints-for-lucky-13/files and Iron Spider arms here : https://www.printables.com/fr/model/187391-iron-spider-arms-for-lucky-13
Thor-approved variants of soozafone's Pencil Polearms: print as-is, without supports. Uses the same topper piece as the original (included). The socket and layer orientation might cause the fit to be a little tighter than the “open”…
A selection of Lego CCBS compatible pieces. Attached pictures show examples of Bionicle MOCs build using these 3D printed arms and legs. I recommend to print in PETG (this is what I've tested). UPDATE. After few months the sockets got a…
This remix adds revamped arms and legs to @JHB's already-awesome Bender model as well as adding new beer bottle and cigar accessories. The arm/leg segments are unified (use 5 for legs, 4 for arms) and use a ball-socket design for full…
Very similar to the Popular T. rex Chicken Arms. Modified by adding another Finger/Claw and stretching the length and size of the arms to resemble the velociraptors from Jurassic Park/Jurassic World, but not too large that it hinders the…
This is a type of bench/seats found on austrian trainstation platforms. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.1mm Notes: I disabled support roofs in Cura due to the added…
Digital 3D model of Durmstrang Institute of Magic wand (Whole/Parts) Classic . This model is a fan-made replica of the wand from Harry Potter. The files contain the whole wand + wand parts + connection screw in STL. This assembly system…
This is a little “bait can.” It's about 58mm tall and 100mm diameter. The lid has holes in it for the little wormies. I have also included an alternative lid (shown in orange) that is a little easier to operate, and has larger/more…
Popeye arms for your cat. The ones I printed were a little small for my bigger cat. He's 13lb, so you can use that as a guide. I upped it to 115 percent after the pic. Those are cans of spinach in the hands if you decide to throw some…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon https://www.patreon.com/c/Adamnant - where you can ask me…
This torso and head will replace your Dummy13 torso and head. Best if printed at 150% or larger. The torso has all the connectors printed inside so it is one piece. You will need the neck and head mount for the Xenomorph head. I am…
Use the included 360 emojis on your Crocs to customize them (jibbitz)! Press “Download STL” to find them all. If an emoji is missing or you need different sizes, you can easily create it using the makerworld customizer ! Or the included…
DISCLAIMER: THIS IS A HARD KIT. It is a injection molding kit adapted to 3D Printing, not something like Dummy 13 that's designed to be printed. It REQUIRES resin printing to be printed at 100%, for filament printing, the minimal scale is…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 7 weapon designs: Fork Billhook Simple Halberd Simple Spear Pitchfork Fancy Halberd Full Staff
Various Croc charms. Initial designs are a duck, pig, ghost, and brick. Printed in PLA and PETG and both worked fine. 0.15 layer height with the 0.4mm HF nozzle on the Prusa MK4S. Works best with organic supports on base plate only.
This an Investigator card stand for the board game Arkham Horror LCG. I liked timograw's general design for an Investigator stand, but this version mixes in more realistic octopus arms and tentacles by ClayRade. The rectangular card frame…
After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…
We are currently building two armies for playing OnePageRules: Age of Fantasy. There are a lot of models available. However, I wasn't able to find fitting proxies for everything. So, this is my take on the 'Ghost Swarms'. Six small ghosts…
Compatible with the magnetic, twist lock and one button articulated arms. *Added longer jaws for tablets or smartphones in landscape in a remix* *Removed the remix and included longer jaws here for tidiness *Added an alternative holder…
This OpenSCAD file enables you to create breast forms in various sizes to suit your needs. Simply load the file up in OpenSCAD. (I recommend the nightly builds , which render super quickly) Features include: Fully customizable with a few…
Dies ist ein Remix von Lukass' Electric pole raillroad 1:87 H0. Der Mast wurde verstärkt und vergrößert. Es wurden unten Befestigungen zugefügt. Zusätzlich wurden Halterungen eingefügt, um alte Märklin Querträger und Ausleger zu…
I've adapted the smooth forearms of the eva figure to the vanilla one, also removed the blade on the back. It prints easily and looks a little more organic than the original one.
Needs some supports Needs a durable filament material because they can break easily when wearing them. Can be paired with the nose from the last upgrade.
Parametric servo arms generator with OpenSCAD. Download last version on GitHub : https://github.com/hugokernel/OpenSCAD\_ServoArms Instructions Easy to use : servo_standard(20, 4); first parameter : the arm size second parameter : the arm…