Search results: rocketry

Sort order

23 models

P
Printablesjcieslak

Horizontal EGG Shock Absorbers TPU Cushions for American Rocketry Challenge 2025

GENERAL: 3D file to protect your Eggs in the American Rocketry 2025 Challenge see The American Rocketry Challenge - World's Largest Student Rocket Contest . This year’s ARC challenge has 2 grade A large eggs horizontally mounted in the…

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
2
Rating
0
P
PrintablesSyndicate plays

Model Rocket for Model Rocketry

Model made for use with Estes Model rocketry parts you need 2 centering rings

Downloads
235
Likes
25
Rating
0
P
Printablesjdegs

Advanced Vase-Mode Hollow Cylinders (model rocketry related)

Inspired by Nerys (Today's 3D Print on youtube), I created some hollow cylinders with spiral reinforcement ribs. In the initial release I have included two outer diameter tube sizes corresponding to BT-50 and BT-55 rocket tube sizes. The…

Downloads
148
Likes
23
Rating
0
P
Printablesjcieslak

3D printed Egg Capsule for Model Rocketry.

This Egg Capsule is for NRC (NAR) Egg lofting model rocket competition. Previously competition capsules were vacu-formed styrene capsules. Now these are harder to find. This approach offers an alternative that is very close in size with a…

Downloads
81
Likes
6
Rating
0
P
PrintablesINFX_TryHard

BRRDS (Best Rocketry Research Determination System)

Hello, this is BRRDS, (Best Rocketry Research Determination System), a high-power rocket developed at NCSSM over the past 3 years from 2019 and launched in late 2021. The purpose of the rocket was for research but really being able to go…

Downloads
63
Likes
17
Rating
0
P
PrintablesDanno

Rocketry Fin Jig

Two OpenSCAD files for generating fin alignment jigs (one for three-finned rockets and one for four-finned rockets). Set the parameters at the start of the file and the rest should be pretty automatic. Please contact me with any questions…

Downloads
61
Likes
6
Rating
0
P
Printablescwbullet

Ejection Canister for Rocketry

Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg = approximately 1 cc. The bottom takes a #4 or M3 screw to hold it to the bulk plate. The hole at 45 degrees is for the…

Downloads
60
Likes
11
Rating
0
P
PrintablesNerys

Micro Quick Link for Rocketry or anything really

I have been prowling the internet for TINY quick links for my rockets. the normal smallest is 3.5mm and its just too large and way to heavy for a typical 3" rocket. I did find some 2mm quick links but its a Japanese specialty item and…

Downloads
57
Likes
7
Rating
0
P
PrintablesGolddragons

3 Inch Rocket Fin Jig / Guides for High Power Rocketry HPR

This is a set of three parts for helping with building your 3 Inch High Power Rocket. This is designed to work with a 3 Fin style rocket, with a 3 inch body tube. This let me epoxy all three fins to the engine mount at the same time and…

Downloads
50
Likes
3
Rating
5
P
PrintablesRocketMan

High-Powered Rocketry

Just a few parts of a high-powered rocket to get folks thinking about what's possible. Stl's of the Nose cone, body tube section (with male and female threads) and the fin can. You would need further customization to turn this into a…

Downloads
45
Likes
10
Rating
0
P
PrintablesTodd Kinney

Anti-zipper for model rocketry

Used in model rocketry to prevent “zippering” or tearing of cardboard tubes during parachute deployment. I printed in TPU. Not sure why you would want it to be rigid, but you could print with anything. I designed it to be used with 3mm…

Downloads
34
Likes
9
Rating
5
P
Printablesjcieslak

LW-PLA Dual Egg Capsule for Model Rocketry NRC Competition

A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…

Downloads
18
Likes
1
Rating
0
P
Printablesjcieslak

Multi-Diameter Launch Tower for Model Rocketry -Space Modeling

Multi - Diameter Launch Tower System. This is a Tower launcher Head I developed for a camera tripod I was given. It has a center open zone or tube suitable for piston usage. The “tripod head assembly” consists of usually three (3) of the…

Downloads
16
Likes
2
Rating
0
P
PrintablesuOttawaRocketry

uOttawa Rocketry Team Ornament

PLA No supports Brim recommended TinkerCAD Ender 3, Ultimaker 2+ by akif a

Downloads
16
Likes
3
Rating
0
P
PrintablesAlby312

UniCT Rocketry Team key ring

UniCT Rocketry Team key ring

Downloads
15
Likes
4
Rating
0
P
PrintablesInaki Iturriaga

Altitude Indicator with Beeper for Rocketry

The Altitude Indicator is a DIY tool to audibly report the peak altitude of model rockets. Check the full project on PCBway: https://www.pcbway.com/project/shareproject/Altitude_Indicator_with_Beeper_for_Rocketry_2c6ef724.html

Downloads
13
Likes
2
Rating
0
P
PrintablesJamie Claye

Rocketry Trophy

Introducing the Rocketry Trophy Mod! Designed to fit those inexpensive participation trophies that just shout WINNER! Just fire up your printer, slap this mod on, and BINGO, you get the first place award to enjoy in the comfort of your…

Downloads
10
Likes
5
Rating
0
P
PrintablesBob_The_Brewer

Rocketry 3.0in Electronics Bay for 2S Battery

Model is a high powered rocket electronics bay sled to hold a 2S 300mAh battery for powering electronics in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. Slots are used to mount battery to…

Downloads
10
Likes
3
Rating
0
P
PrintablesBob_The_Brewer

High Powered Rocketry Removable Rail Button & Launch Lug Set

High powered rocketry requires use of rail buttons to retain the rockets to the guide rails. The rail buttons are either affixed using wood screws into the rocket body or with weld nuts that don't mount flushly against the inner rocket…

Downloads
10
Likes
1
Rating
0

Model Rocketry Display Stand Collection

A collection of model rocket display stands. Includes 18 mm and 24 mm mounts. These were previously available separately, but I have decided to place them all together in a single location. This is labeled as a "Work in Progress" as I…

Downloads
10
Likes
2
Rating
0
P
PrintablesBob_The_Brewer

Rocketry 3.0in Electronics Bay for Eggfinder Mini TX

Model is a high powered rocket electronics bay sled to hold a Eggfinder MiniTX GPS Tracking unit in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. #4 fasteners are required to attached MiniTX…

Downloads
9
Likes
1
Rating
0
P
PrintablesHeavyOsmium

Ryobi Battery Sleeve with Switches for Model Rocketry

A handle or sleeve with switches to connect to an 18V Ryobi for launching model rockets Instructions Print the parts (one of each except 2X glue rings). Glue the sleeve to the clip plate and reinforce by gluing one ring at the bottom. Use…

Downloads
4
Likes
1
Rating
0
P
Printables

Ryobi Battery Sleeve with Switches for Model Rocketry

A handle or sleeve with switches to connect to an 18V Ryobi for launching model rockets Instructions Print the parts (one of each except 2X glue rings). Glue the sleeve to the clip plate and reinforce by gluing one ring at the bottom. Use…