Search results: rockshox

Sort order

125 models

P
PrintablesChristkind53

RockShox (Rock Shox) Logo

I created a Rock Shox logo that you can put on your prints (eg. a mud guard)

Downloads
254
Likes
28
Rating
0
P
PrintablesAeggsbaerde

RockShox Valve Cap

Valve Cap for RockShox bike suspension fork and similar. Thread is M8x0.75 Suitable for RockShox Lockout Knob and RockShox Lockout Fix Cap

Downloads
209
Likes
13
Rating
0
P
PrintablesFilip L.

RockShox Bottomless Token

I was unable to buy them, so I replicated them. Use only if necessary and at your own risk. But they work just like the original for me. The shape is a bit different due to printing without supports. You should print with more resistant…

Downloads
863
Likes
49
Rating
5
P
PrintablesT_Stahl

Rockshox Zeb Front Fender V.1.0

This is my current version of the Rockshox Zeb bolt on front mudguard/fender. Fits 27.5" tires, not sure yet about 29". If you print it for a 29er and there is clearence issues please let me know so I can adjust the model! Mounts using 3x…

Downloads
796
Likes
69
Rating
4.86
P
PrintablesTeuflor

Rockshox Seal installation tool 35mm (lyrik, Yari, Pike...)

Hey, i created this Rockshox seal installation tool for 35mm seals like Pike / Lyric / Yari Forks. i would recommend 25-30% infill. 5top, 5bottom

Downloads
713
Likes
42
Rating
5
P
PrintablesPeyu

MTB Mudguard w/ a RockShox logo

A set of front and rear MTB mudguards with a RockShox logo. STEP files included so you could modify or scale. Could be printed in two colors.

Downloads
680
Likes
84
Rating
4.67
P
PrintablesJon Ballen

Rockshox Zeb Front Fender

This front fender is a two piece design that contains a front and rear piece. It was designed for a 29 inch wheel setup, so it will look slightly different with 27.5 inch wheels. Printing Instructions: At least 30% infill (I used…

Downloads
650
Likes
110
Rating
5
P
PrintablesBugalugs12

Rockshox Deluxe Volume Reducer/Token

Bottomless Tokens and Gnar Dog Tokens reduce air volume in your rear shock and create greater progression at the end of the shock's travel. Add or remove tokens to tune your shock's bottomless feel. Gnar Dog Tokens are equivalent to 2.5…

Downloads
482
Likes
30
Rating
5
P
PrintablesRenārs Vilnis

RockShox Dust/Oil Seal Installation Tool for 35mm stanchions

Low profile RockShox Dust/Oil Installation Tool for forks using 35mm stanchions. Fits satisfyingly with a "click" on the dust seal. Designed to have a very small footprint to save space in the toolbox for other stuff. Opensource design:…

Downloads
410
Likes
37
Rating
5
P
PrintablesTony Tsai

Rockshox cable clamp

Cable clamp for Front fork Print instructions Category: Sport & Outdoors

Downloads
406
Likes
28
Rating
5
P
PrintablesStuart Fleming

Mudguard For Rockshox Zeb & Domain

This is a basic mudguard that prints in 2 parts. I have designed a long version and a medium version. I was gonna make a short one but never got to it as I felt there isnt really a need. Ive printed it in PETG using 100 walls to achieve a…

Downloads
336
Likes
35
Rating
0
P
PrintablesEmsup

RockShox Purple Bottomless Token

RockShox purple bottomless token / volume spacers. This is for 2023 RockShox Super Deluxe Shocks that use the thinner purple volume spacers. I printed it on my Mini, with X and Y sizing set to 101.3% and Z to 100.5% in the slicer. Printed…

Downloads
317
Likes
17
Rating
5
P
Printablescmh

Adapter for standard hubs on RockShox Torque Cap forks

Pretty much a straight-up copy of the Newmen TC adapter because that's the simplest, most elegant solution that I've seen. In fact, the Newmen adapter is inexpensive and such a nice fix I'd suggest you just buy it from them and give them…

Downloads
300
Likes
22
Rating
0
P
PrintablesSocinPower

Fox and Rockshox and generic Vice Clampset

That's a Clampset for Mountainbike Mechanics, Hobbists, DIYers and much more. It is compatible with most Fox and Rockshox forks and shocks. Never tested it, so I am waiting for your opinion.

Downloads
293
Likes
30
Rating
5
P
PrintablesAndre

Rockshox MTB Mudguard

A mud flap for the rear wheel on my MTB. There are two print versions, one mirrored and one plain.

Downloads
274
Likes
65
Rating
0
P
Printablestsuga

Chamferless Sockets for Fox/Marzocchi/Rockshox

Chamferless 1/2in drive sockets designed to fit damper and air spring top caps on mountain bike suspension forks. This set includes common sizes for Fox, Marzocchi, and Rockshox forks. For reference, the 26mm socket printed with Prusament…

Downloads
271
Likes
43
Rating
5
P
Printableslucien atkinson

RockShox 35 mud guard

Made for my RockShox 35Gold RL but should work with other RockShox forks just use an M6 bolt to hold it on. STL file.

Downloads
267
Likes
45
Rating
5
P
PrintablesLeafy

Fox Shock to Rockshox Spring Adapter

This adapts from 35mm ID Fox springs found on many shocks (DNM Burner, DVO, Cane Creek) to 38mm ID Rockshox springs. Make it from something with good compressive strength and 99 perimeters. As shown briefly in this video.

Downloads
260
Likes
12
Rating
0
P
PrintablesBaklin

Rockshox top cap tool

This is an old design that I imported from my prints on Thingiverse. I needed to remove the top cap from the airspring on my Rockshox Sid. This can be done with a cassette tool but mine has a centre pin to locate it on the shaft/cassette.…

Downloads
243
Likes
19
Rating
5
P
PrintablesPlasticyBits

DU Bushing Removal Tool Fox RockShox Shocks

This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…

Downloads
207
Likes
21
Rating
5
P
PrintablesJhonas

24mm 1/4" Socket for Rockshox

Designed this socket to service my rockshox suspension(xc32) and made it to fit on my 1/4" torque wrench. Printed in PLA and it works really well for ocasional services at home. I recommend printing by side to take advantage of the layers…

Downloads
198
Likes
38
Rating
5
P
PrintablesJCJ

AirTag holder for RockShox forks

Printed with PETG, 15% Infill. No Support. You'll also need an M6 socket head cap screw and an M6 nut. Consider decreasing the layer height on the top section of the AirTag bracket model. The walls in that area are relatively thin, which…

Downloads
198
Likes
23
Rating
4.33
P
Printablesbasik

Steerer tube plug for RockShox Lyrik 2021 fork

Simple snug fitting plug for the bottom of a steerer tube of RockShox Lyrik 2021 fork

Downloads
194
Likes
16
Rating
5
P
PrintablesAsBurli

RockShox 35 Silver TK Fender for Scott Genius eride

complete redesign of the source. Fork crown adapted to RockShox 35 TK Silver installed in the Scott Genius eride. Mounting is done with 2 stainless steel screws 5x10 Print Settings Printer: VORON 2.1 Rafts: Doesn't Matter Supports: Yes…

Downloads
178
Likes
28
Rating
0
P
PrintablesLeafy

RockShox Motion Control Floodgate Shim

Allows you to adjust the floodgate opening amount on motion control forks with non-adjustable floodgates. Print instructions PLA works fine. This prints as a single layer so just scale it in Z to adjust the amount of shimming you add,…

Downloads
172
Likes
5
Rating
0
P
Printableskartbratoffel

Mudguard adaptor for RockShox Judy

The RockShox Judy is missing threads to attach a mudguard. This Adaptor fits into the struts of the fork bridge and is secured using zip ties (max. 7mm width). It uses a standard M6 bolt with 10mm hex-head and a nut (preferably nylock).…

Downloads
166
Likes
7
Rating
0
P
PrintablesBeMa0815

RockShox brake cable guide clamp

The cable guide fits most Rockshox forks from 2013-2023. The thread for the bolt is M3 and should be about 15-20mm long. The design is slightly different to the original, but a little lighter.

Downloads
162
Likes
12
Rating
0
P
PrintablesGrazhevskiy

Rockshox steerer tube plug

Simple and lightweight plug. The finger cutouts proved useless, so I offer two versions: with them (Type1) and without (Type2). Recommended Print Settings: Material: TPU Layer height: 0.2mm Walls: 2 Infill: 15% Top/Bottom shell: 4

Downloads
161
Likes
38
Rating
5
P
PrintablesDaniele

Rockshox bottomless token 30 mm in diameter

Rockshox token for 35 mm stanchion, token diameter 30 mm, screw thread M27x1

Downloads
160
Likes
5
Rating
0
P
PrintablesAleksi

RockShox wiper seal tool for 32 mm stanchions

Helpful for installing wiper seals

Downloads
149
Likes
12
Rating
0
P
Printablesbiketiger

ROCKSHOX U-TURN KNOB

Designed to replace broken U-turn knob on RockShox Judy fork

Downloads
148
Likes
4
Rating
0
P
Printablesaiber

Rockshox Manual Front Suspension Lockout Switch

This is a replacement lockout switch for a front suspension Rockshox fork. My fork is a coil fork, so I don't know if it works with their air forks. It was attached with a sheet metal/wood coarse thread screw. An octagonal inset in the…

Downloads
145
Likes
13
Rating
5
P
PrintablesHans

Rockshox Air Cap Remover Tool

Rockshox Air Cap Remover Tool My mountainbike has a rockshox fork and on top it has a cap to protect the airnippel. Even when I just finger tight the cap back it is hard to remove because it has only a tiny handle to untighten it. With…

Downloads
138
Likes
15
Rating
4.67
P
PrintablesSinJun

steerer tube plug rockshox zeb (38)

plug for use with rockshox zeb 160mm travel 38mm plungers fits with pushfit and can hold airtag

Downloads
137
Likes
6
Rating
5
P
Printablestomohulk

rockshox_judy_silver_tk_solo_air_27.5+_120_travel

first off, after watching the design on this: https://www.thingiverse.com/thing:4309078 fucking awesome work man, and I give you MAD PROPs for doing this customizable. I know you said you spent like a day just doing the fork crown fit,…

Downloads
117
Likes
22
Rating
0
P
PrintablesCrAnKBrOtHeR89

RRP bolt-on fender adapter - RockShox Pike Lyrik 2023

You need two DIN 439B M4 nuts. Pause the print, set in the nuts and continue the print. As shown in the pictures, you can use the screws supplied with the RRP mudguard. You only need a countersunk head screw for the middle one.

Downloads
113
Likes
29
Rating
0
P
PrintablesSirHades

Rockshox AirCap tool

After using Supjj's tool on our Fox suspensions, we needed something for our family's growing fleet of Rockshox forks. This tool allows for easy removal of the air cover cap without tears. Printed in PLA, 3 walls, 15% crosshatch infill…

Downloads
113
Likes
13
Rating
0
P
PrintablesStefan

15x110 thru Axle Mount for RockShox ZEB

Other front axle mounts available here are perfectly fine, but i needed one with a bit more clearance for the Rockshox ZEB fork's rebound-adjuster-cap.. So i made this one. Print Settings: PLA+ or PETG 20-30% infill does print fine…

Downloads
111
Likes
17
Rating
4
P
PrintablesClemi

RockShox Fork Shock Pump Pegboard Mount ikea skadis

Just a simple mount for a RockShox Fork/Shock Pump. You can use the T-Nuts for Ikea Skadis Pegboards system to mount it to ikea skadis. I didn't add the T-Nuts aligment guide so you can align the holder so the pump hangs straight. For…

Downloads
109
Likes
28
Rating
5
P
PrintablesDimitri Fendel

Adapter SKS Mudrocker for Rockshox Adapter 2023 ZEB Select Fork

Da der Original Adapter der mit dem Mudrocker von SKS mit geliefert wurde bei mir nicht Passte habe ich diesen Adapter entwickelt der Formtechnisch besser aussieht und Passt!

Downloads
108
Likes
12
Rating
5
P
PrintablesAsBurli

Base for MTB Fender RockShox35 TK Silver Fork

Base for the creation of a MTB mudguard fork Rockshox35 TK Silver

Downloads
107
Likes
15
Rating
0
P
PrintablesRJD2

Rockshox Zeb RRP mudguard Adapter

Adapter for fitting RRP mudguard to rockshox zeb fork. Tried it on 2022 model, not the 2023. This is v2.0. It requires a zip tie for extra security and m3 bolt and washer. Uses other screws from RRP mudguard kit. Do not torque the…

Downloads
102
Likes
9
Rating
5
P
PrintablesAeggsbaerde

RockShox Lockout Knob

Lockout knob for RockShox air suspension forks, easy to print without support. Suitable for RockShox Valve Cap

Downloads
97
Likes
8
Rating
5
P
PrintablesFelix Boesch

Vent Valve Tool for RockShox Reverb AXS Dropper Post

Tool to bleed the Rock Shox AXS Dropper Post on its Vent Valve System. Follow the Rockshox official tuturial video (Youtube) for instructions how to use. Quick fix if your dropper post feels squishy and needs a bleed. Duration of the…

Downloads
94
Likes
4
Rating
0
P

Rockshox SKS mudguard adapter / Adapter für SKS Schutzblech an Rockshox Paragon Gold Federgabel

Rockshox SKS mudguard adapter / Adapter für SKS Schutzblech an Rockshox Paragon Gold Federgabel

Downloads
92
Likes
6
Rating
5
P
Printablescmh

Rebound adjustment knob for RockShox SID SL Ultimate

The SID SL Ultimate comes with a very simple, very minimal rebound adjuster. It's just a small 2.5mm L key pressed into a plastic clip that holds it on the lower fork nut. It's surprisingly light at only 4.2g, but I was curious if I could…

Downloads
89
Likes
6
Rating
0
P
Printables74ck

RockShox PopLoc suspention housing

I designed this model to replace my original RockShox Judy Silver TK AIR PopLoc housing since my original one got broken. Fits and works for me since year! Should be printed at least with PETG / PC / ASA Print quality: 0.2mm (Higher print…

Downloads
88
Likes
7
Rating
0
P
Printableshaluzaak

Rockshox lockout knob.

Lockout knob for RockShox air suspension forks. It's designed for Recon 335, but it might work for some other forks too.

Downloads
84
Likes
8
Rating
0

32 mm rockshox recon steerer tube plug

this is a remix to make the plug fit a 32mm steerer tube

Downloads
79
Likes
6
Rating
0
P
PrintablesTony Tsai

Rockshox Rebound adjuster knob

Adjuster knob for rockshox forks. adjust for your fork Uses a 2.5mm hex key updated to have a longer grab in the middle for the key Print instructions Category: Sport & Outdoors

Downloads
74
Likes
10
Rating
0
P
PrintablesShokus

Rockshox Zeb Pressure Relief Valve Dust Cover

I lost the rubber pressure release valve dust covers for my Rockshox Zeb Ultimate. I printed these from TPU 95A and they seem to fit well.

Downloads
70
Likes
4
Rating
0
P
PrintablesAeggsbaerde

RockShox Lockout Fix Cap

Cap for RockShox air suspension fork. If you need a fixed position for lockout knob. Put it on 8-edged knob, turn it and press down on 6-edged nut and fix it with a countersunk screw. Easy to print without supports. Suitable for RockShox…

Downloads
67
Likes
7
Rating
5
P
PrintablesIBC

Low Profile RockShox Charger 3 RC2 LSC Cap

Needed a lower profile LSC knob for the Charger 3 RC2 damper in my RockShox Zeb forks. so that they cleared the down tube. Printed, tested, fitted, functions great. Supports shouldn't be needed, print upside-down at 100% infill with good…

Downloads
66
Likes
4
Rating
0
P
PrintablesMarosh

RockShox Reverb Bleed Adapter M5

Simple adapter for bleeding RS seatposts. Thread size M5 Print settings: Speed: slow (based on your printer capabilties) Material: PLA works just fine (with lower temps) Perimeters: 5 Layer Height: .12 mm Supports: No Use brim

Downloads
65
Likes
4
Rating
0
P
PrintablesmARTin

Páčka zamykání vidlice Rock Shox Poplock/ RockShox PopLoc remote lockout lever

Doporučuji alespoň PETg, ale PLA nejakou dobu taky vydrží. Minimálně 4 perimetry a min 15-20%výplň. Recomanded PETg, but PLA is also fine for few days. Minimum of 4 perimetres and minimum 15-20% infill

Downloads
65
Likes
19
Rating
0
P
Printablesaiber

Rockshox Lockout Remote System

These are the parts necessary to put together a remote lockout system for your front Rockshox suspension fork. Compatibility not guaranteed. How I Designed This http://www.alshub.com/Blog/Entries/2011/5/20_Putting_it_All_together.html &…

Downloads
62
Likes
8
Rating
0
P
PrintablesJack J

RockShox Mudguard-MTB/Downhill

RockShox Mudguard-MTB/Downhill, printed in TPU

Downloads
60
Likes
7
Rating
0
P
Printablesdonnyturns

Rockshox Recon suspension fork top mudguard mount

The Rockshox Recon suspension fork doesn't have a top mounting hole for a mudguard. This adapter provides a way to mount a mudguard. It fits into the top bridge of the fork and is secured by zip ties. An M5 bolt, pushed through the…

Downloads
54
Likes
5
Rating
0
P
Printablesdr.dentz

Rockshox SID Manual Lockout Remote Conversion Kit

I did not need the remote lockout for my SID fork. However I also did not want to completely modify the damper cartridge and take out the spring. Therefore I designed a manual lockout conversion kit that is quite simple. It only needs a…

Downloads
52
Likes
8
Rating
0
P
Printablesbutchja

Rockshox Charger RC Clamping Jaws

Jaws for 27.35mm Rockshox charger RC seal head, similar to 00.4318.029.000

Downloads
52
Likes
14
Rating
0
P
PrintablesKubiczek

RockShox Reba lockout from crown instead of remote lockout

INSTALATION: “reba_cover_body.3mf” should be printed “snug fit”, it needs to be pressed on 24mm hex screw firmly and it needs to be a little bit tilted(1mm is enough) to make crown work(crown need to hold a spring in a motion control…

Downloads
51
Likes
9
Rating
0
P
PrintablesGiannisTDM

10mm hex to 24mm socket for servicing forks, rockshox and fox and installing cassettes.

Should not be used to fully tighten on forks that have a direct 24mm 'bolt' on the top, Should be fine on forks that use a cassette tool, my cassette tool had a 24mm ‘bolt’ on top. This should be used to aid in damper, airspring or…

Downloads
50
Likes
3
Rating
0
P
PrintablesMiles L

RockShox Charger Race Day Damper Fork Lever

Replacement for SRAM Part Number 11.4018.082.023 Designed to accept heat set insert for setscrew.

Downloads
49
Likes
1
Rating
0
P
Printablessickkitty

rockshox mudguard for mtb

This model can be printed using ams or by doing a manual fillament swap.

Downloads
47
Likes
7
Rating
0
P
Printablescyron52

Fender for Rockshox Bluto - 4 Piece

Remixed from the fender design created by ChPech . I modified the design to print on a shorter printer. It prints in 4 pieces rather than 2. I added an extended interface to make it easy to glue the parts together. I just used super glue.…

Downloads
47
Likes
13
Rating
0
P
Printables3D Garage

AirLink RockShox Zeb

AirLink RockShox Zeb, the adapter allows you to use quick-fit adapters for 4mm ptfe tubes, the tuning reduces progression by passing the air from the sheath containing the hydraulics to the sheath containing the air and vice versa. The…

Downloads
47
Likes
6
Rating
4
P
Printablesfawqs

Rockshox Monarch Softjaws

Soft Jaws for Rockshox Monarch Sevice. Print in PETG. With holes for 1x5mm Magnets.

Downloads
44
Likes
5
Rating
0
P
Printablesmarvmilo

RockShox Remote Spool Casing – Durable Replacement

Why I Made This On all the RockShox forks I’ve owned, the small plastic spool housing eventually broke—usually right at the spot where the ferrule sits. To avoid replacing the same weak part again and again, I designed a stronger…

Downloads
44
Likes
6
Rating
0
P
PrintablesPlasticyBits

DU Bushing Removal Tool Fox RockShox Shocks

Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike. The bushing showed up, but the tool never did...... So I decided to try a 3D printed one; which worked surprisingly well. Use a 4mm…

Downloads
39
Likes
5
Rating
0
P
Printablestimo9799

Rockshox Reverb Stealth handlebar mount

Hello, Somedays ago I break the handlebar mount in metal of my Rockshox Reverb Stealth after a crash. I modeled it on Fusion 360. I printed with PLA with 60% density. Maybe it better to print it whit PETG or ABS for better resistance. I…

Downloads
38
Likes
8
Rating
0
P
Printablesmarigu

Rockshox fork tool

Air valve opener for Rockshox forks (maybe will fit to other brands, not tested). When you want to pump more air to your fork (or just check with manometer) sometime it is hard to open that top air valve cap with hand as it may be fit…

Downloads
36
Likes
6
Rating
0
P
Printablesdertester

Rockshox Paragon Gold Light Mount

Halterung für 2 Lichter auf der Rockshox Paragon Gold. Nutze ein Nabendynamolicht mit Bremslichtfunktion und ein normales Ebike-Licht. Zum Anpassen auch die Step dabei oder einfach Tinkercad. 2x M3 (25-30mm) incl. Muttern nötig für die…

Downloads
35
Likes
2
Rating
0

RockShox Travel Spacer

I needed to convert a 2018 RockShox Recon RL Gold from 140mm to 120mm travel. RockShox don't sell 30mm spacer for this fork, only 10 and 20mm. Designed based on 10mm spacer which was installed in the 140mm travel Recon and pictures, so…

Downloads
34
Likes
3
Rating
0

RockShox monarch volume reduse

RockShox monarch volume reduse printable petg. A cut is required for installation.

Downloads
34
Likes
1
Rating
0
P
Printablesjj000000

RockShox lever horizontal mount

Intro I made this alternative mount, because I didnt like the way the original looked and that the cable went straight down from the handlebars. For this mod you only need a single M4 nut. The other fasteners are reused from the original.…

Downloads
30
Likes
7
Rating
0
P
PrintablesÜLF

Rockshox (Pike) Fork Mudguard/Fender Adapter

Designed so that you can attach and remove a mudguard to your forks quickly without having to use zip ties that result in wasted time, fiddly installation and wastage every time you want to remove your mudguard. Permanently zip tie the…

Downloads
29
Likes
5
Rating
0
P
PrintablesBJKeane3

Rockshox AXS Reverb clamping jaws

Vice soft jaws for clamping the upper or lower section of a 30.9 AXS Reverb Dropper. The magnets I used are 5mm diameter x 2mm and are friction fit but you could also glue them. I printed these with 60% infill to ensure they will hold up…

Downloads
29
Likes
6
Rating
0
P
PrintablesRoger Essig

Front Mudguard Mold to suit Rockshox Lyrik/Yari Giant Crest 34

A mold to clamp a freshly 3D printed front mudguard, such as the stylish one from here! https://www.thingiverse.com/thing:4317969 If you are quick in transferring a finished and heated/flexible PETG flat mudguard to the mold, it will fit…

Downloads
28
Likes
17
Rating
5
P
PrintablesNicolas

Rockshox Shocks rebound/compresion tool

It goes on the rebound/compresion knobs and can be torned with a 8mm hex key

Downloads
27
Likes
6
Rating
0
P
PrintablesNickiDotDK

RockShox Reverb Stealth C1 IFP Tool 55mm

This IFP insert tool is made specific for Reverb Stealth C1 Dropper Posts. It inserts the IFP 55mm into the tube. It has a fat lip to prevent it from going in too far. It can be printet in any material that is not too soft. I have…

Downloads
27
Likes
2
Rating
0
P
PrintablesQuietCoder

RockShox Judy SL Lockout dial base design

This is a quick mockup of the plastic lockout dial on a RockShox Judy SL. It should be printable with no supports. This is here for people to take and remix for their needs. It will not do much in its current state (it would be hard to…

Downloads
24
Likes
2
Rating
0
P
PrintablesMattvie

rockshox shock pump handle holder

This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.

Downloads
20
Likes
4
Rating
0
P
Printablescaste1200

Rockshox Seringe to Fox FIT bleed Adapter

Best if printed with TPU but other materials should work ( be careful if you use a brittle material to no break it inside the cartige..

Downloads
20
Likes
4
Rating
0
P
PrintablesNicolas

Rockshox Zeb fork kork

This gets put in the lower hole of the steertube, use one o-ring in the groove to be sure it doesn't go out

Downloads
20
Likes
3
Rating
0
P
PrintablesTom

Rockshox Reverb Stealth Handlebar Mount

Hi, I bought a new dropperpost and forggot to buy a handelbar mount for it. Then I found and printed the model form @timo9799_2020501 but it broke. So I made it stronger and thicker and printed it in PETG. Now it works just fine. Remixed…

Downloads
19
Likes
8
Rating
0
P
Printablesdr.dentz

New Rockshox SID Manual Lockout Remote Conversion Kit

V2 of the manual lockout conversion kit. You will need a spring e.g. from a ball pen that has a diameter of about 4mm. You might have to play around with the sizing of the spring. It should be strong enough to keep the locker in place,…

Downloads
19
Likes
4
Rating
0
P
PrintablesJzinkbaker

Rockshox Zeb/Bontrager Hub Stiffener

I recall seeing these hub stiffeners being sold by trek/ bontrager but now I cant find them, so I made my own. Longer on goes on hub side with disc brake. Increases stiffness by increasing hub face/ fork face contact area from 22 to 34mm.…

Downloads
18
Likes
1
Rating
0
P
PrintablesMr_Guze

Rockshox Boxxer Team absorber cap

I created a matching 1:1 spring retainer plug for the 2009/2010 RockShox Boxxer Team. The thread fits perfectly to the dimensions inside. I printed it on PETG and so far it's holding up and nothing is happening with it. Filling : 25% I…

Downloads
18
Likes
1
Rating
0
P
Printablesdonnyturns

Rockshox Recon suspension fork mudguard mounts

The Rockshox Recon suspension fork (and presumably many other Rockshox models) do not have mounting holes for mudguards. This adapter can be attached to the lower legs of the fork using zip ties to provide a way to mount a mudguard to the…

Downloads
16
Likes
3
Rating
0
P
PrintablesGrazhevskiy

Rockshox lockout cap cover

While I'm thinking about whether I need a remote lever, I've made a cover. Print in TPU with no infill.

Downloads
16
Likes
1
Rating
0
P
PrintablesCreepShow

RockShox Digital Fork | Shock Pump Handle

The stock handle on the RockShox Digital Shock Pump can get a bit uncomfortable while pumping shocks to high pressures. I created this handle to easily go over the existing handle and can easily be removed. M5 hardware was used Printed in…

Downloads
15
Likes
4
Rating
0
P
Printablesloasmap

Rockshox Judy Gold RL fork token/volume spacer

Maximum of 3 tokens, 4 might fit but untested First token needs to be glued to the top cap of the air spring, i used JB Weld but any good plastic-metal bonder should work. Additional tokens can just be linked to the first one by pushing…

Downloads
15
Likes
1
Rating
0
P
Printablesa9000s

ROCKSHOX SIDLuxe volume reducer

i needed a volume reducer, and could not buy it fast, so i draw my own first experimental version, installed but not tested outdoor yet

Downloads
12
Likes
2
Rating
0
P
Printableskieran finn

Rockshox Recon Silver Volume Spacer

This Volume Spacer is designed to friction-fit into the top of the cap, based on a YouTube video I saw where they used a rubber bung pushed into the top cap.

Downloads
12
Likes
2
Rating
0
P
PrintablesRok Bukva

Rockshox Sonic volume token

Not for super deluxe

Downloads
12
Likes
1
Rating
0
P
PrintablesNicolas

Rockshox super deluxe body vise block with lower bearing eyelet

This tool is for the shocks that use a bearing lower eyelet. I also have one for the shocks with a normal bushing.

Downloads
11
Likes
3
Rating
0
P
PrintablesSuke

EXT spring adapter to Rockshox

With this adapter you can use EXT Coils for RockShox shock. Material: PETG (minimum), ASA (recommended), PA12+CF15 (probably best). A lot of perimeters. Better top surface then 100% infil..

Downloads
10
Likes
0
Rating
0
P
Printables^TeD^

Rockshox SID lockout front suspension

Rockshox SID lockout front suspension to replace remote lock Category: Sport & Outdoors

Downloads
10
Likes
0
Rating
0
P
PrintablesStamen Dimitrov

Bicycle Tool: Fork Cone Hammer for 1.5" tapered fork RockShox Lyrik

Works with cone heights of around 75mm, made it based on my RS Lyrik 2023. A tool to hammer it with is also included.

Downloads
9
Likes
4
Rating
0
P
Printablesaqf23

RockShox rebound adjuster knob cap (w/ .f3d)

This is a cap for the Rock Shox rebound adjuster knob. It's the same on my SID 2020 and Reba 2013. Very useful to protect the nob from hits or when you leave the bike on the floor without the front wheel. Rotate the cap 90º in the Slicer,…

Downloads
9
Likes
2
Rating
0