Search results: roland

Sort order

198 models

P
PrintablesGeklatscht

Roland PA-48 N Key-Hammer for White Keys

Roland PA-48 N Key-Hammer for White Keys These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break…

Downloads
1,345
Likes
32
Rating
5
P
Printablesjwr

Roland AIRA S-1 (T-8/J-6) Case/Cover

This is a cover/case I designed for the Roland AIRA S-1 Tweak Synth. It was carefully designed to print well, snap on and stay securely attached, while protecting the knobs. A lot of effort went into designing it so that it's easy to pop…

Downloads
524
Likes
49
Rating
5
P
PrintablesAdage3D

Large Drum Stick Holder - For Roland Electric Drum Set

Sturdy drumstick holder for an electric drum set. This clips nicely on the rack of my Roland TD-17 but should fit any rack tube measuring 40mm. Print with top face down on print bed. Did not require supports on my Carbon X1. Printed with…

Downloads
514
Likes
52
Rating
5
P
PrintablesKPTexan

Silhouette Cameo 4 - Adapter for Roland Blade Holder

This is an adaptor which will allow a Roland blade holder to be used in the Silhouette Cameo 4. These blade are easy to change out, and much less expensive than using new Silhouette ratchet blades. A compatible Roland blade holder can be…

Downloads
504
Likes
45
Rating
5
P
PrintablesYVR3DPrints

Roland AIRA Compact 2 Tier Stand

Hey everyone, YVR3DPrints here with a 2 tier stand model for the new Roland AIRA Compact series instruments. This was a fun project and wanted to build something for me and my kid to both play at the same time without getting too much in…

Downloads
475
Likes
41
Rating
0
P
PrintablesRaffaeleV65

Double Stand for Roland AIRA Compact Units P-6, J-6, etc.

Table stand for 2 Roland AIRA Compact units. 5 pieces, no glue or screws required. Material: PLA+ @ 0.28 No supports

Downloads
446
Likes
45
Rating
5
P
PrintablesDrum Stash

Roland Compatible Electronic Drum Module Mount (MDP-7U)

A replacement for a lost or broken plastic Roland-compatible drum module mount, modeled to replicate the original MDP-7U. Fits: Roland-compatible modules that use the MDP-7U mount, including TD-3, TD-6V, TD-8, TD-10, TD-12, TD-20, TD-30,…

Downloads
366
Likes
21
Rating
5
P
PrintablesBobby

Roland Aira Compact (S-1 | J-6 | T-8 | E-4 | P-6) Stand

If you're looking for an easy to print stand for your Roland Aira Compact (S-1 | J-6 | T-8 | E-4 | P-6) device – look no further! The device fits snug and secure in the stand and doesn't wobble. I've accounted for all the necessary…

Downloads
339
Likes
26
Rating
5
P
PrintablesJames Fingas

Roland PA-48 S Key-Hammer for Black Keys

We got a Roland HP-245 piano from a friend but some of the keys didn't work. It's hard to get replacement hammers these days, and they're expensive. Thankfully @Geklatscht created a model for the hammers for the white keys. But what about…

Downloads
303
Likes
4
Rating
4.5
P
PrintablesAziadocs

Roland KD-10 kick drum attachment

Hi guys! I just purchased TD27KV2, and it came with KD10. I couldn’t attach my Iron Cobra pedal properly… So I designed this 3D piece and printed it! It is working perfectly! I thought many of you would have the same issue, so here is the…

Downloads
287
Likes
10
Rating
0
P
PrintablesBaud Girl

6mm Trim Pot Cap Encoder Knob for Korg Volca, Roland Aira Compact, Behringer Mini, M-VAVE FM-1 and more

This is a remix of one of @CalebKraft’s 6mm trim pot caps, originally designed for the FM-1. They fit the 6mm trim pot knobs found on most desktop mini synths, including the Korg Volca series, Roland AIRA Compact series, Behringer Mini…

Downloads
260
Likes
39
Rating
5
P
PrintablesMarius

Roland GS-24 pen adapter

It's a very simple adapter to transform a vynil cutter into a pen plotter. I've updated this model with adapters for other pen fillers. The GS-24's blade location prevents thick pens to protrude abover it, so I made the adapter to just…

Downloads
235
Likes
13
Rating
5
P
Printablesatok

Stand for Roland MC-707

The stand does not require any additional parts or gluing. It fits and prints well on the Prusa MK3 in 0.30 mm draft mode with “build plate only” supports and 20% infill. It uses a screw holes of MC-707 and has an additional tab for…

Downloads
234
Likes
12
Rating
0
P
Printablesdsal2019

Roland Drum Clamp Bracket

Thank you for making the original. It had nearly everything I needed, except I also needed knurling on the inside of the drum stem clamp and for convenience anti-turn catches for the nuts that hold the clamps. I made this with tinkercad,…

Downloads
219
Likes
41
Rating
0
P
PrintablespoOgee

Roland Ax-Synth Keytar Modulation Bar

Drew up a replacement modulation bar for the Roland Ax-Synth keytar that should also be compatible with the newer Roland Ax-Edge. The part is one of the flimsiest pieces of plastic I've seen in a high-usage section of the instrument, and…

Downloads
213
Likes
7
Rating
5
P
PrintablesBenny Do

Yamaha DTX500 or Roland Drum clamp

This clamp will be used for Yamaha drum pad. You need 3 x M6 x 40mm LG, Socket head cap screw (SHCS) and 3 x M6 Hex nut. Material : PETG, Filament.. with 20% infill and with no support.

Downloads
212
Likes
24
Rating
4.5
P
PrintablesRaffaeleV65

Stand for Roland AIRA Compact Units P-6, J-6, etc.

Table stand for Roland AIRA Compact units. 4 pieces, no glue or screws required.

Downloads
211
Likes
21
Rating
5
P
PrintablesMarco Lebdech

Roland Aira Compact Stackable Cover

Stack-able dust cover for these tiny Roland devices. I needed some case to be able to store them in my limited storage space and came up with this. Fits snugly both my T-8 and S-1 without issues. I made case to be as minimal as possible…

Downloads
211
Likes
17
Rating
5
P
Printablesballanux

Stand for Roland Aira Compact series (S-1, T-8, J-6, E-4)

Elevated stand so you can place another device bellow it and pass the cables from behind. I tweaked the height so it works well with my MIDI keyboard, but will also work when using two Airas together (see pics). It leaves enough space…

Downloads
198
Likes
23
Rating
0
P
Printableswavexx

Roland MC-101 Stand

Fancy 30° stand for the Roland MC-101. Inspired by the Roland MC-101 Compact Stand , but made lighter and with fancy ventilation holes on the platform. Can be printed vertical (as given) without supports with some minor scarring on the…

Downloads
190
Likes
20
Rating
0
P
PrintablesGreg At Denteon

Denteon Roland Calibration Pin Setter

Tool to check or reset the pin length for your calibration pin - Applicable to all Roland DWX Dental milling machines. To use: Insert your calibration pin with the stop ring until both bottom out (as in the photo). Tighten the stop ring…

Downloads
184
Likes
2
Rating
0
P
PrintablesPrinter McGee

Roland SPD One Floor Mount Guitar

Made this at my Dads request. Keeps the SPD in with just friction. Have added the fusion f3d file incase you want to your liking

Downloads
182
Likes
6
Rating
5
P
PrintablesChado

Roland V-Drum Extendable Drumstick Holder

I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…

Downloads
164
Likes
27
Rating
5
P
PrintablesGawel C

Roland drums headphone holder

Roland drums headphone holder

Downloads
163
Likes
24
Rating
5
P
PrintablesAlmightyFireFly

Roland V-cymbal Rotation Stopper for DW 8mm Cymbal Arm

I have DW cymbal arms on my drum rack and needed to mount Roland Crash cymbals. This is a simple fix to allow that to work. Just remove the bottom cymbal threaded washer and replace with this part. The cymbal stand thread is m8x1. I…

Downloads
161
Likes
12
Rating
5
P
PrintablesDrexoll

Drum stick holder for e drums (ROLAND, ALESIS, YAMAHA, others?)

Because I drop drum sticks a lot, I made this drum stick holder. It holds 24 + 2. I can the freely drop drum sticks as I practice, and pick them up when I'm finished, instead of during a song. Good times. I only printed the 24 + 2 because…

Downloads
136
Likes
22
Rating
0
P
Printablesmorf

Roland drums phone tablet holder TD series

Hi Folks, This is a simple model of phone / tablet holder for Roland E-Drums. Fits my TD07-KV. 1x M4 Screw is needed to fix two parts

Downloads
135
Likes
18
Rating
5
P
PrintablesEric Dannewitz

Roland Aerophone AE-20 Stand Adapter

This is an adapter to make your flute/clarinet peg an Aerophone AE-20 peg

Downloads
135
Likes
2
Rating
0
P
PrintablesModel Magic

The Dark Tower - Roland - 2017

The Dark Tower - Roland 3D printable model. Super easy to print, adjust size to your needs and go!

Downloads
125
Likes
26
Rating
0

Roland Garros logo (With 2 color changes)

This is the Roland Garros Logo with 2 color changes. Have fun !

Downloads
125
Likes
7
Rating
5
P
PrintablesDrexoll

E Drum Music stand and drum stick holder (ROLAND, ALESIS, YAMAHA, other?)

UPDATE:I changed the tall (td-17) mount top to grip on both sides. Because mine eventually broke. Booo! I also made it solid. Infill need not use much more than supports anyway. I printed the update in TPU. Works well so far. Music Tray…

Downloads
124
Likes
20
Rating
5
P
PrintablesAndersNygaard

Roland MA12c modern replica

I really wanted to get the roland ma12c speakers, but they were really expensive and hard to get where i live, so i tried to make the myself Parts: Amp: https://www.amazon.de/dp/B095NZXRMM?psc=1&ref=ppx_yo2ov_dt_b_product_details Driver:…

Downloads
117
Likes
42
Rating
0
P
PrintablesFabrice Lebas

Roland FP-30X table top tablet stands

The curved shape of the FP30-X piano top does not allow to place any item steadily. These stands, glued to a wooden board will attach securely to the piano, providing a flat surface. Printed on a Prusa MK4 with PLA in draft mode, I then…

Downloads
116
Likes
14
Rating
5
P
Printableshanibalv2

Roland Aira Cover Generic

It is a generic cover for the Roland Aira Compact series. It should fit on all models. If you want to print the device with a tight fit, reduce the scale of the x and y components. In my case for the T-8 Beatmachine on a Prusa MK4 I set…

Downloads
116
Likes
3
Rating
0
P
Printablestmeub

Double Stand for Roland AIRA Compact Units (S-1, T-8, J-6, E-4)

Double Stand for Roland AIRA Compact Units (S-1, T-8, etc.) Platform angles: 25° and 45° Two versions are provided: • with hexagonal groove pattern • plain Assembly requires three rods to hold the sides together. I used solid aluminium…

Downloads
108
Likes
7
Rating
0
P
Printablespachek

Roland V-Drum Headphone Hanger

Needs a M5 X 20 mm minimum lenght bolt with a nut

Downloads
105
Likes
14
Rating
5
P
Printablespachek

Roland V-Drum Mobile Phone Support

needs a couple of M5 X 15 mm with nuts

Downloads
100
Likes
12
Rating
5
P
PrintablesTurtleCreations

Headphone Holder Roland Drum Kit

An holder for an headset to match with our Roland drum kit. The clamp fits the support bars of the drum kit of 38mm. I designed the clamp to be fitted with an M5 screw. One side has an hole for an hex nut. Category: Music

Downloads
97
Likes
22
Rating
0
P
Printablesfreedom2000

Roland vinyl cutter CNC adapter - drag knife-

I wanted to adapt a cheap "Roland like" vinyl cutter to my CNC. You can find them on ebay at a very very good price (see picture). I wanted also to have this cutter somehow floatting over the bed to balance the imperfections of…

Downloads
94
Likes
22
Rating
5
P
Printablesmkrz

Roland and The Dark Tower

PLA, printed horizontal, slow speed, hotbed 70°C. Brim.

Downloads
91
Likes
15
Rating
5
P
PrintablesMatt Nelson

Roland FP-10 Piano Accessory Tray

The Roland FP-10 is a great beginner electric piano, but it's compact, curved shape doesn't have a flat surface on the top, so there's no place to put a metronome, phone, clock, etc. This is a handy little tray that sits nicely on the top…

Downloads
87
Likes
14
Rating
0
P
Printablesibash

Roland FP-30X Piano Headset Hook

Based on Jymden's design. This is a hook for the Roland FP-30X Piano stand (KSC-70). It fits on the back board of the piano stand. The headphone hook is 60mm long which fits headphones with a wide headband like the Samson SR850. The end…

Downloads
87
Likes
8
Rating
0
P
PrintablesCharly BEGOOD

ROLAND TD-25 Cable management

you can use it ssolo or with an elastic for secure.

Downloads
86
Likes
17
Rating
5
P
PrintablesAdage3D

Roland Electric Drum Kit Headphone Holder

This headphone holder was designed to fit perfectly on the rack of my Roland TD-17 but should fit any rack tube measuring 40mm. The clip prints seperately, just add some super glue and you're ready to rock. The headphone holder itself…

Downloads
84
Likes
11
Rating
0
P
PrintablesJTheAce

Piano/Keyboard Stay for Folding Stand - Roland FP-30X

This print clips onto a standard 1.2 inch (30.5mm) diameter keyboard stand tube to help stabilize keyboards that are too narrow to reach the rubber end caps. The tall piece on the top (13mm X 20mm) fits into the slot of a Roland FP-30X.…

Downloads
82
Likes
14
Rating
5
P
PrintablesKamil_INC

Ender 3 Neo vinyl cutter holder Roland style for crtouch

Bracket for Roland vinyl cutter holder that uses crtouch mount points with longer screws. Tested only on Ender 3 Neo. Should be compatible with all neo series but I have no way to confirm that. It is made so that the bottom aligns with…

Downloads
82
Likes
11
Rating
0
P
PrintablesBenny Do

Yamaha DTX500 or Roland drum IPad Holder

Ipad holder for Yamaha DTX500 drum kit. I created this part in addition to the Drum mount on the Yamaha DTX500. Print with 20% infill with no support Material : PETG, PLA .. Hardware: 3 x Socket head cap screw M6 x 40mm or 50mm LG and 3 x…

Downloads
81
Likes
10
Rating
0
P
PrintablesRetrogram

Bundeswehr MAN 8x8 Roland Air Defence Truck

Printed in 0.15mm layer high with organic support

Downloads
80
Likes
6
Rating
0
P
PrintablesAurel

Transport Case for Roland AIRA S-1

A transport case or cover for the Roland AIRA S-1 synthesizer. No supports 40% Infill PETG Print large flat side down The case has a lot of tollerance to make sure it fits. If your printer is well calibrated, you may want to scale the…

Downloads
80
Likes
11
Rating
0
P
Printablesworstcase

simple Riser for Roland SH-4D Synthesizer

My table is a little higher as normal, so i invented a simple riser to have a better look on the Synth.

Downloads
80
Likes
5
Rating
5
P
PrintablesTom Kastrup

Sheet/phone stand for Roland V-Drums

The stand is made out of two files, one is the stand itself, and a tube that is glued to the bottom of the stand, so it can rest ontop of the structure of the drum. It fits perfectly on my TD1-DMK. I haven't tested on other drums, but it…

Downloads
79
Likes
11
Rating
0
P

Pen adaptors for Roland Camm1 pro plotter

Those are two differents versions of an adaptor that turns your Roland vinyl cutter into a neat drawing machine ! The file named “Bic adaptor for Roland Camm 1 pro.stl” is made to hold any classic bic pen cartridge The file named…

Downloads
79
Likes
2
Rating
0
P
Printablesvitpoula

Roland Boutique series cover

I made this case for my Roland SH01a synthesizer. It fits really well and I integrated little hole in which the spring loaded pin on the synthesizer clicks into. Printed without supports upside down. Dimensions, settings and material:…

Downloads
78
Likes
6
Rating
0
P
PrintablesAleks192

Siser Juliet and Romeo Roland Blade Spacer

The Siser Juliet uses a standard style vinyl cutter shuttle clamp, but the stock blade has a lower shoulder than a Roland blade does. Roland blade holders are ⅓ the price of a Siser one, and are functionally identical. This spacer allows…

Downloads
78
Likes
10
Rating
0
P
PrintablesThijs Triemstra

Roland Drum wall mount bracket clamp

Mounts Roland tubes for electronic drum kit to the wall. Print settings for brackets in pictures: layer height: 0.4mm nozzle: 0.6mm infill: 50% (grid) filament: polymaker pla pro dark purple printer: prusa mini+

Downloads
77
Likes
15
Rating
0
P
PrintablesCharly BEGOOD

Roland TD-25 Mouse support

I would like to connect a screen and control my mouse of my computer directely from my TD-25. in this way I can control my drum software without moving …. I have printed the arm in PETG on my Prusa. The plate & the border is printed with…

Downloads
72
Likes
17
Rating
0
P
PrintablesNathanFulton

Roland Cymbal to Alesis Stand Pivot Mount

I remixed this so I could use Roland V-Drum cymbals on my Alesis cymbal stand mounts. This replaces the plastic pivot and reuses the screw that was holding it to the post. There are two screw holes: One is locked rotation and the other is…

Downloads
72
Likes
9
Rating
0
P
Printablesishikawats

Clips for Roland Piano Stand, Cable Holder

I made this for a Roland FP-E50 digital piano with the KSFE50 stand. Keeps cables and power brick hidden behind the crossbar of the stand. Can probably be used with other piano stands, crossbar is 15 mm thick. There is a also a holder for…

Downloads
72
Likes
13
Rating
0
P
PrintablesJezz

Minimalistic Drumstick Holder for Roland V-Drums

Simple holder for drumsticks fitting the Roland V-Drums series

Downloads
68
Likes
6
Rating
0
P
PrintablesKevin Wong

Headphone Hanger for Roland FP-30 and FP-30X Piano Stand (KSC-70)

Printing Tips: use 0.1 layer height for a tighter fit on the mounting bracket use tree supports to for the back cutout only

Downloads
68
Likes
9
Rating
5
P
PrintablesGawel C

roland drum notes holder

roland drum notes holder some parts need to be glued

Downloads
67
Likes
10
Rating
0
P
Printablespicatostas

Roland Verselab MV-1 angled stand

It fits the printing bed of the Prusa Mini +. No fancy printing settings 0.3 mm Draft 15% infill will do.

Downloads
66
Likes
4
Rating
0
P
PrintablesShorco

Mackie HM-4 Headphone Amp Roland V-Drum Mount

Mount to connect a Mackie HM-4 headphone amp to a roland vdrum drumrack using a Roland mount. Requires 4x M3 x 6mm Allen head bolts 2x M3 x 12mm Allen head bolts 2x M3 Nuts Connect mounting rod to the base using M3 screws and nuts Remove…

Downloads
63
Likes
11
Rating
5
P
Printablesdesordenado

Piano Score Support for Roland Go Keys/Piano

The Roland Go Keys comes without a support for the score, so I printed these parts and used a 4mm acrylic sheet to make one. I printed them in PLA with a lot of infill (more than 50%, don't remember how much). You need to print 2 of the…

Downloads
60
Likes
8
Rating
0
P
PrintablesAgent Mess

Chickenhead Knob for Roland SP-404 MKII Potentiometer

Model Description Custom chickenhead-style replacement knobs for Roland SP404, designed as a two-part assembly to fit the indented potentiometer area while maintaining the classic aesthetic of vintage guitar amplifiers. Build Instructions…

Downloads
57
Likes
6
Rating
0
P
Printablesw00h

Roland FP-30 Piano Power Supply Holder

I modified another design to accustom the FP-30 PSU and made a few changes for my needs: the whole design is slightly longer because of the longer PSU it's mirrored, so the mains cable comes out towards the left leg of the piano when…

Downloads
57
Likes
10
Rating
0
P
Printablesthenullray

Roland MT-32 Volume Knob Replacement

This is a Roland MT-32 replacement knob for the volume control. I made this for printing on an LCD SLA printer like the Elegoo Mars. If you've ever seen an MT-32 on eBay or other sites that sell stuff like this, you have seen TONS of…

Downloads
52
Likes
2
Rating
0
P
Printablesmorf

Roland TD07 module clamp drums

I've designed a simple clamp to move Roland Module to different location to make e-drums even more compact. 2x M4 screw + 2x M4 nut is necessary

Downloads
51
Likes
10
Rating
0
P
PrintablesJames Mellor

Roland TR-6S Stand

Hi, I have made this simple stand for the Roland TR-6S. As you can see it is not perfect by all means but it gets the job done. and with limited skills, it worked out quite well.. My print details: Black PLA, 0.20mm Quality, 15% Infill.…

Downloads
51
Likes
16
Rating
0
P
Printablesjestempablo

Roland GO Piano / Keys tablet / phone stand

I wasn’t satisfied with the original sheet stand because it was loosely attached, causing my tablet to sway when placed on it. Additionally, having a small phone positioned awkwardly in the middle of such a large attachment felt…

Downloads
50
Likes
7
Rating
0
P
Printableslovemetwotimes

Roland AIRA Compact Decksaver / Protective Top Cover / Lid

No supports required. Material PLA or PET-G

Downloads
50
Likes
1
Rating
0
P
Printablesfloretan

Roland FP-30X power adapter holder

The Roland FP-30X digital piano comes with a separate power adapter, which ends up in the floor and getting in the way. This holder makes it possible to just hang the power adapter on the back of the frame.

Downloads
49
Likes
6
Rating
1
P
PrintablesPenitentbread

Roland S-1 case

this is an attempt at creating a case for the roland s1 synth. I can be a bit clumsy sometimes and i know that it won't be long until i damage it (and then through the process of 3d printing fix it again) so i created this case or box. is…

Downloads
48
Likes
3
Rating
0
P
Printablestofi

drumstick holder millenium alesis and roland

3D Model Description – Alesis Drumstick Holder (37 mm Tube) 3D‑printed drumstick holder compatible with Alesis racks, designed to mount securely on a 37 mm tube. This holder can store up to 4 drumsticks, giving you quick and easy access…

Downloads
47
Likes
5
Rating
0
P
PrintablesCharly BEGOOD

Roland MV30 knobs

Now you can print your own knobs colorised for the mixer of your MV30

Downloads
47
Likes
1
Rating
0
P
PrintablesGreg At Denteon

Roland DWX-50 Suction Hose Holder - By Denteon LLC

The Roland DWX-50 dental milling machine has a common failure wherein the suction hose comes loose during operation. This 3d printed holder clamps securely onto the suction hose, and uses a pre-existing screw mounting point on the machine…

Downloads
47
Likes
3
Rating
0
P
PrintablesKohei

Roland Ax-Synth Keytar Modulation Bar Remix

This was for a friend and wanted to retain some of the stock parts functionality. He said it works great with the 2 additions listed above. Printed in ASA. 3mf and .step file will be provided if you wish to edit it. Not sure why the step…

Downloads
46
Likes
0
Rating
0

Roland TD11 Kick support

Support for Roland kickpad. Since the pad is not fixed onto the rack, it does not stay where it should.

Downloads
46
Likes
8
Rating
0
P
Printablesmac70

Button Box for Roland E-Drum Racks

Button Box for Roland E-Drum Racks A button box which can be mounted directly onto Roland Drum Racks for easy remote control of your DAW. Background: It was inconvenient for me to operate my laptop running a DAW (in my case Cubase) while…

Downloads
46
Likes
7
Rating
0
P
PrintablesFurs

Roland FP-30 - Power adapter holder

This allows you to attach the pianos power adapter to the back of the KSC-70. To Print Printed it in PLA Layer height of 0.3mm

Downloads
45
Likes
3
Rating
5
P
PrintablesGawel C

roland drumsticks holder

roland drumsticks holder Need a piece of dubblesided tape tostay on place

Downloads
44
Likes
2
Rating
3
P
Printablesmorf

Roland drums headphone hanger

Simplest possible headphone hander for e-drums

Downloads
43
Likes
9
Rating
0
P
PrintablesWiggeli

Bolzen für Deckel von Fahrradanhänger Roland Carrie M

Dieser Stopfen sitzt etwas fester als das Original. Druckeinstellungen : 0.15 mm Quality, Standardeinstellungen. Gedruckt in Prusament PETG Jet Black.

Downloads
43
Likes
3
Rating
0
P
Printableshgo

Cover for Roland E-4 voice tweaker

This is a dust-cover for the Roland Aira Compact E-4 Voice tweaker. It is designed so that the cover can be on the tweaker while it is being used. Important to me, because the knobs are very easy to accidentally change, causing drastic…

Downloads
43
Likes
1
Rating
0
P
Printablesepikur

Headphone Holder Roland Piano

Supports are needed for this print. Anyways, it should hold a Headphone which is connected to a Digital Piano. I got the original Roland FP-30 Stand and construct the model suitable for that. It should be suitable for others as well, I…

Downloads
43
Likes
7
Rating
5
P
PrintablesArthur Langlois

Roland cymbal lock

I couldn't find any roland CYM-10 cymbal lock at a reasonnable price so i decided to design my own version. It works with an m6 nut and a regular m6 screw or drum screw. Best to print with a lot of infill and in PETG for strength.

Downloads
42
Likes
3
Rating
0
P
PrintablesJose Miranda

Tool Holder for Roland MDX-40A Benchtop CNC Milling Machine

End-mill, collet and wrench holder for the Roland MDX-40A benchtop milling machine, or just about any small milling machine. It has holes for end-mills with 1/4" and 1/8" shank diameter and holds both wrenches used to remove the tools.…

Downloads
41
Likes
0
Rating
0
P
PrintablesLucky_M
Downloads
41
Likes
9
Rating
0
P
PrintablesX-Gen

Roland KT-10 Slip Resistant Base plates

Slip resistant base plates for Roland KT-10 Kick triggers. Helps keep your pedals locked in place while you play without damaging your carpet.

Downloads
40
Likes
7
Rating
0
P
Printablestiagocharters

Roland BIC pen adapter

This is a hack for using BIC ballpoints pens on vintage pen plotters. I've tested on a Roland GRX-400, and it works. Note that this model is highly experimental, more experimentation is need. Please adapt it to your needs and to you…

Downloads
38
Likes
3
Rating
0
P
PrintablesForOurGood

Roland TD-1K mount parts

3D printed parts used for mount cymbal to Roland TD-1K

Downloads
37
Likes
3
Rating
0
P
Printablesllanterner

Unmatched Roland Deschain

Everything you need to play Unmatched with Roland Deschain, the character from Stephen King's "The Dark Tower" books. Attached are 3MF and STL files for: • Roland Deschain figure • Base compatible with Unmatched humanoid figures • Health…

Downloads
37
Likes
0
Rating
0
P
PrintablesCharly BEGOOD

Roland TD-25 Keyboard Support

This is my Logitech K230 Keyboard support for Roland TD-25. You need : 2 bolt M06x25 2 Screw M06 2 Nut M06 This version is only to use with audio editor or drum software for editing values and names when you edit presets. Of course it is…

Downloads
37
Likes
3
Rating
0
P
PrintablesThijs Triemstra

Roland cutting knife storage box

Storage for 15 Roland cutting knives.

Downloads
36
Likes
4
Rating
0
P
Printablesmojeto

Roland FP-30X Stay for Folding Stand

Clips onto 1 inch (25.4 mm) stand tube. Stay raises the piano by 5 mm to level it with the front rubber caps. The block (20 x 13 x 13 mm) fits into the slot of a Roland FP-30X digital piano. 5 mm wide cable tie can be used to secure the…

Downloads
35
Likes
5
Rating
0
P
Printablesiturnknobs

Roland Boutique 2-Tier Stand for Jaspers Holders

The Roland Boutique line of synthesizers have a nice compact form factor, but they're designed to be mounted into something. Roland offers the DK-01 dock and K-25M keyboard, but if you own more than one or two, then this isn't a clean or…

Downloads
34
Likes
8
Rating
0
P
PrintablesBroknP

MPCNC Universal Mount for Roland Style Drag Knife (no supports)

Simple but effective drag knife mount for the Universal tool mount. Has some flex so it does not break easily. Fits the Universal tool mount from HicWic which I Remixed here for the MPCNC Primo:…

Downloads
34
Likes
4
Rating
0
P
PrintablesDrum Stash

Roland Compatible Electronic Drum Rack Foot (MDS-25)

A replacement for lost or broken rubber feet on Roland MDS-25-compatible electronic drum racks. Modeled from scratch using an original foot for dimensional reference. Fits: Roland MDS-25-compatible electronic drum racks. Compare to the…

Downloads
33
Likes
3
Rating
0