Search results: ronin

Sort order

250 models

P
Printablesarrendy

Ironing test

Adding ironing to the top of models is a great way to give a better appearance. But what's the best spacing for ironing? Is the default 0.1mm optimized or can the same results be achieved faster with more spacing? At what point does…

Downloads
137
Likes
12
Rating
0

Ironing Coaster Test

Wanted to create an ironing test that could be utilized beyond just the test itself to avoid being left with plastic scraps when done. This test print can double as a large drink coaster or keep it to use as a reference for your selected…

Downloads
80
Likes
7
Rating
0
P
PrintablesoIKR

Ironing Test: Perfect ironing

This is a 3D Print designed to test your ironing settings. :)

Downloads
66
Likes
3
Rating
0
P
PrintablesJayS

Wall Bracket for Ironing Board

A simple wall hook for hanging your ironing board on the wall. The diameter of the leg of my board is 35mm.

Downloads
51
Likes
10
Rating
0
P
Printableslivius

Protective feet for g.e. Ironing Board Vileda (~18.3 mm)

Semi oval shape protective feet for e.g. ironing board. Pipe dimention ~18.3 mm . Angled wall so it catch it good. Big stand area but also big angled stand area (wider). I have printed in draft mode for speed. Change to more precise if…

Downloads
49
Likes
2
Rating
5
P
PrintablesBlackbird

Ironing water can - 300ml

It can hold 300 ml (10 oz) of water. Height 95 mm. To be printed in vase mode. I used 0.6 mm nozzle and 0.7 mm extrusion width. Tried only with cheap PETG and it is much more sturdy than expected. I made one larger version, but then it…

Downloads
48
Likes
4
Rating
5
P
Printablesjcjames_13009

Clip for ironing board

Inspired by similar models that didn't fit my ironing board, I redesign a new clip with Fusion 360 Printed in Prusament PETG Urban Grey with 0.2mm layer height and standard PrusaSlicer parameters Installed, it fits perfectly. So now my…

Downloads
34
Likes
4
Rating
0
P
PrintablesTheBoatbuilder

Ironing Board Wall Mount

It's time to hang your ironing board up in that cupboard. Print a left and right and glue them together. You'll need two assemblies. 0.4 nozzle and PETG

Downloads
34
Likes
7
Rating
0

Wall Mount for Ironing Board (Laurastar)

Wall mount for an inroning board (optimized for LauraStar) or any other brand that uses round tubes for the base. Can be fastened to the wall using screws with 4.5mm diameter (the ones coming typcially with 6mm dowels

Downloads
28
Likes
3
Rating
0
P
PrintablesLeoganPro

Top Surface Ironing Test

This calibration test is designed to find the ideal ironing settings for achieving a smooth top surface when printing with a 3D printer. The model consists of a 10x10 array of flat cylinders. Along the X-axis, the ironing speed increases…

Downloads
25,809
Likes
1,342
Rating
4.8
P
Printablesjon

Ironing flow test (ready to use with settings)

Ironing flow test for your filaments. How often the top layer that was ironed it's cracked or lines still visible ? No more failed top layers. Specially with PETG you need to fine adjust the ironing flow to achieve the best results.…

Downloads
9,896
Likes
540
Rating
4.89
P
Printableskaziko

Bambu Lab X1C/P1P Ironing Flow Test

Works with either Bambu Studio, or Orca Slicer. Uses default 0.20 Standard @BBL X1C settings. To use with P1P Series printers, you will need to adjust the profile to match your printers settings. The Ironing modifiers should remain in…

Downloads
1,883
Likes
181
Rating
5
P
PrintablesFosstech

Ironing test prusa

Remixed to have premade settings for prusaslicer. Just import, slice and print.

Downloads
1,665
Likes
138
Rating
4.91
P
PrintablesChrizzlyam

Ironing test for the Centauri Carbon

This is a matrix 10x10 to find the best combination of flow and speed on the ironing feature.

Downloads
1,494
Likes
72
Rating
4.5
P
PrintablesTwistedNexus

Ironing Flow Test (Generic Export)

Ironing Flow Test model for testing 10% thru 60% flow in 10% steps

Downloads
1,409
Likes
86
Rating
4.33
P
PrintablesAlejandro

Top surface ironing test Orca Slicer

Test to calculate the straightening speed on the Orca Slicer. With this test, you can calculate the straightening speed you need by adjusting the speed from 15 mm/s to 40 mm/s, and using different flow rates from 10% to 50%.Test to…

Downloads
1,389
Likes
38
Rating
5
P
Printablesfelykiosa

test_ironing orca slicer

hi I created this model with different preset to tune your ironing in orcaslicer. simply take the file use your setting (normaly the only thing that change for each model is the ironing setting ) and print it. enjoy !D

Downloads
1,382
Likes
32
Rating
0
P
Printablescrashingtardis

Orca Slicer Ironing Settings Test

Modified Orca Slicer settings for my Neptune 3 Pro and added graph scale markers.

Downloads
1,158
Likes
31
Rating
5
P
PrintablesDBarwikowski

Minimalistic ironing test

Please consider Liking this model :) Ironing test Each rectangle has different ironing settings. Pick the one that suits you the best :) Originally designed for my SV08 but you should be able to adjust it to your printer

Downloads
1,123
Likes
49
Rating
5
P
PrintablesFluffyKoala

Bambu Ironing Test

These models are designed to test ironing flow and speed. They are optimized for 0.2mm and 0.16 layer heights. Models test the flow rates of 10%, 15% or 20% through the speeds of 10-40mm/s. The sliced files are for a Bambu X1C. Just load…

Downloads
1,002
Likes
61
Rating
5
P
Printableshrodrig

Top Surface Ironing Test - for Snapmaker U1

Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG

Downloads
992
Likes
82
Rating
4.75
P
PrintablesFraoch

Ironing test square

This is a recreation of the simple ironing test square by VladSalad at Thingverse. It's just a simple 50mm X 50mm X 1.6mm flat cube, I recreated it in FreeCAD and exported the STL so it's not the same file, but it is the same part. It…

Downloads
976
Likes
16
Rating
5
P
PrintablesDS Prints

Creality K1 Ironing Test (Yet Another)

YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…

Downloads
952
Likes
39
Rating
5
P
PrintablesXavier Faraudo

Parametric ironing calibration test matrix

The ironing process (and its results) depend of three variables: flow rate ( FR ), spacing between ironing passes ( SBIP ) and printing speed ( PS ). The matrix shape allows to check two setting combinations at once; whilst we have three…

Downloads
910
Likes
122
Rating
5
P
PrintablesAmmar Faridi

DJI Ronin Handle for RS series

Better print in PETG with increased walls and infill

Downloads
715
Likes
67
Rating
5
P
PrintablesFurial

Ironing Calibration - Flow/Speed/Line Spacing

UPDATE: 06.03.2026~ I have uploaded .3mf files saved in Orca Slicer and Prusa Slicer separately as it seems not every one of them is compatible when opening the .3mf saved in different slicer. Hope this will help ya guys. UPDATE:…

Downloads
708
Likes
47
Rating
5

Ironing Speed and Flow Test - Flashforge/Orca-Slicer

Thank you very much for downloading, hopefully I've been able to help you guys some in your journey. I have made the ironing test v2 to include 10-100mm/sec and 10-100% flow rate. V1 is still available for download and follows the…

Downloads
704
Likes
14
Rating
5
P
PrintablesZenoTrace

Ironing test plate Multiple layer heights + settings

Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…

Downloads
615
Likes
33
Rating
0
P
PrintablesHadukis

Ronin Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…

Downloads
607
Likes
211
Rating
5
P
PrintablesWallArtMania

Ronin - Japan 2d Wall art

Ronin - Japan 2d Wall art, simple but very nice print

Downloads
599
Likes
98
Rating
5
P
PrintablesMZ4250

Ronin Fighter & Kishi Demon Miniature

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
556
Likes
115
Rating
0
P
PrintablesBudwin

DEVTAC Inspired Ronin ballistic helmet

DEVTAC Inspired Ronin ballistic helmet Enjoy Category: 3D Printing

Downloads
478
Likes
60
Rating
0
P
PrintablesMorten V Jensen

Ironing Test - With Guide

Ironing test with guide + connected.

Downloads
472
Likes
12
Rating
0
P
PrintablesRandoTechNerd

CLEAR PETG Tile & Ironing Test ORCA .3mf (update for Orca of How to Print Glass by Rygar1432 & others)

FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…

Downloads
468
Likes
32
Rating
0
P
PrintablesAneoPsy

Ironing Test Model

Ironing Test Model I developed this little calibration tool to test my ironing settings. BENEFITS: Fast to print Calibration tool

Downloads
428
Likes
21
Rating
5
P
PrintablesSaberyPerder

Ironing Calibration Test + Guide

Guide - How to perfect your Ironing on PrusaSlicer This is my own Guide of the Ironing Test by NuggetsINC on MakerWorld, but ready for Prusa Slicer 2.9.4 A very simple and detailed guide to test and understand how different ironing…

Downloads
419
Likes
35
Rating
5
P
PrintablesArcaminis

FREE Ronin Samurai | Pre-supported

🧙♂ Want the full The Legendary 47 Ronin set? If you like this model, you can get the entire collection here : 👉 https://www.kickstarter.com/projects/arcaminis/the-legendary-47-samurai-ronin-stl-miniatures?ref=6kkqpn 🎁 Free Ronin Samurai…

Downloads
396
Likes
108
Rating
0
P
PrintablesBoogie

Monotonic infill & ironing test

Monotonic infill & ironing test Testfile for the new features of Prusaslicer 2.3.0 alpha 1 https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.0-alpha1 Print instructions gcode 1: monotonic infill test gcode 2: monotonic…

Downloads
390
Likes
7
Rating
5
P
PrintablesBrojek 3D

Ironing Board Hanger

A single hanger with dual hooks to hang the ironing board from.

Downloads
390
Likes
30
Rating
4.86

Perler Beads / Ironing Beads

Replacement iron-on beads with 10 mm diameter. These do not need much filament and are great to print the very last bit of a spool. Tip: In Cura set “Print Sequence” to “One at a Time” and print til there is no filament left.

Downloads
371
Likes
76
Rating
0
P
PrintablesTree Fiddy

Orca Slicer - Basic Ironing Calibration

This tests ironing flow rates, 5%-25%, this was created with Orca Slicer 2.3.2 Feel free to change settings to your liking

Downloads
363
Likes
5
Rating
0
P
PrintablesMartin Dugdale

Creality Ender 3 SE Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…

Downloads
363
Likes
3
Rating
0
P
PrintablesBudwin

Red Ronin Full Armor Set

Red Ronin Full Armor Set, Everything is included except the GUN 1.- Sizing - The suit will need to be sized for your needs as it is roughly sized to fit a Average male around 6 foot, I recommend Armorsmith by The Armored Garage for…

Downloads
342
Likes
78
Rating
0
P
PrintablesGajowy

Ironing test for PLA

Check if every single part have different ironing settings in slicer. Use brim to get everything attached. In X axis you have different speeds In Y axis you have different flow rate Check which one looks the best :) Edit: values are not…

Downloads
326
Likes
14
Rating
0
P
PrintablesAwesomeOne

Prusa MK3S Ironing Test with Axes

This model includes axis labels for speed (mm/s) and flow rate (%) to the original model. The grid layout was also switched to align with the conventional x-y axes on a graph. Note that the axes add about 30 minutes to the print, but the…

Downloads
268
Likes
21
Rating
5
P
PrintablesMartin Dugdale

Prusa Core One Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…

Downloads
265
Likes
9
Rating
0
P
Printablespxzvc

Ironing Test Square

Quick & Simple Ironing Test Square to really hone in those settings!

Downloads
260
Likes
11
Rating
5
P
PrintablesSaintVY

Ironing board wall mount hanger brackets

The diameter of the board leg is 19 millimeters, so the shelf is 20 millimeters wide. The angle of inclination of the legs relative to each other is 66 degrees.

Downloads
229
Likes
35
Rating
5
P
PrintablesMAY3D

Ronin Samurai Statue STL | Japanese Warrior Figure | Collectible Sculpture for 3D Printing

Bring the spirit of ancient Japan to your collection with this highly detailed Ronin Samurai Statue STL file. Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and…

Downloads
225
Likes
25
Rating
0
P
PrintablesKuba_6249

Ironing test and ironing flow adjustment tool

I made ironing test and ironing flow adjustment models, a single plate contains round hole test, flat slope ironing test, and curved slope ironing test, depending on settings,a single plate should take 2 - 3g of filament, a single plate…

Downloads
223
Likes
14
Rating
5
P
PrintablesRafael_s

Leifheit ironing board cable clip (spare part)

Leifheit ironing board cable clip (spare part) After the original clip broke off, I decided to construct a new, better one. Printed with PLA. layer height: 0.2mm infill: 40% For wire diameter: 2,8mm “clip_v2” is normal orientation…

Downloads
192
Likes
11
Rating
5
P
PrintablesMartin Dugdale

Creality K2 Plus Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…

Downloads
191
Likes
4
Rating
0
P
Printablesbwees

DJI Ronin Arca Swiss Plate

This is a replacement Arca Swiss camera plate for a DJI Ronin Gimbal. I have a Ronin-SC2 and this plate works great. This part should work with the DJI RS 4, RS 4 Pro, RS 2, RSC 2, RS 3, RS 3 Pro and Ronin-S, although it has only been…

Downloads
189
Likes
4
Rating
0
P
PrintablesOttaRoss

Ironing Board Hanger

Get your ironing board off the floor - perhaps on the back of a closet door as I did with this approach. I looked at the various brackets others shared but thought I would like something a little different. Some others depend a bit more…

Downloads
189
Likes
20
Rating
0
P
PrintablesMartin Dugdale

Creality K1 Max Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…

Downloads
180
Likes
7
Rating
5
P
PrintablesMattStultz

Ironing Example

I wanted to share the GCODE for the two cubes I printed as an example of the new ironing feature coming to PrusaSlicer 2.30. These are both the same model one is sliced with Ironing turned on, the other without. Print them both and enjoy…

Downloads
161
Likes
15
Rating
5
P
PrintablesThe Rookie

Ironing calibration test

All you have to do is insert the filament you are using et Voila ! testing speed and extrusion for ironing

Downloads
159
Likes
7
Rating
4
P
PrintablesBugman_140

Ironing Board Hangers

Quick Practical print to hold the ironing board against the wall to stop it jumping on me in the dark. shared the model to keep these attackers at bay.

Downloads
158
Likes
31
Rating
5
P

THE LAST RONIN TMNT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Dark Grey Transmission Distance: 2 PLA Gray Transmission Distance: 1 PLA White Transmission Distance:…

Downloads
157
Likes
44
Rating
5
P
PrintablesMartin Dugdale

Creality Ender 3 KE Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

Description: This ironing calibration test is designed specifically for the Creality Ender 3 KE to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a…

Downloads
155
Likes
4
Rating
0
P
PrintablesCat3D

Ironing Test

This is a small test object that you can use for testing out the new ironing function Print instructions As I don't know which filament you will use it's hard to say. My settings for TPU: For my test I have adapted the line width from the…

Downloads
153
Likes
12
Rating
5
P
PrintablesPax Prints

D&D Miniature: The Jolly Ronin (Santa Samurai)

Unite holiday cheer and martial honor with this unique Santa Samurai miniature! This highly detailed 3D model depicts a legendary warrior who blends the spirit of giving with the discipline of the samurai. Clad in traditional armor and…

Downloads
144
Likes
26
Rating
0
P
PrintablesAstroPhunk

Ironing Test - Prusa Core One+

The 5x5 grid consists of 25 individual parts (10 mm radius, 5 mm pitch). The platform can be deleted and replaced with a custom part (this platform has 1.6 mm thickness). This version is configured for Prusament PLA+ using a standard…

Downloads
135
Likes
36
Rating
0
P
PrintablesTvarus

Ironing board holder - Wall mount

3mf file has a pause at arround mid print to insert washers Additional needed hardware 2 washers (optional) 2 screws suitable for your wall type Printing suggestions Print on the side for maximum strength Suggested mounting Get 2 screws…

Downloads
134
Likes
15
Rating
5
P
PrintablesIHDC

Ronin wall art

I used split files. Enjoy :D.

Downloads
127
Likes
30
Rating
0
P
Printablesstephancasas

DJI Ronin S Cold Shoe Extension

This is an extension arm designed to fasten to one of the M4 mounts on the DJI Ronin S. There are two parts: a bracket and an arm. The bracket fastens to the M4 mount and then allows the arm to slide snugly into place so that it doesn't…

Downloads
125
Likes
18
Rating
0
P
PrintablesCrazyK

Rockpro64 RoninDojo case

Case designed for the Rockpro64 board, can house up to 2 SSDs Designed by @MustyDuster & @Crazyk031 Modifications made by @mathiaspl20

Downloads
124
Likes
24
Rating
0
P
Printablesstriller

Printer Friendly remix of minimalist wallet by @BryceCronin

Wanted to try a minimalist wallet without spending too much money in case I wasn't a fan. Original files were a great starting point, but was designed for CNC'd metal. this allowed it to stay rigid even with the band channel being very…

Downloads
112
Likes
20
Rating
5
P
PrintablesMartin Dugdale

Creality K2 Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…

Downloads
111
Likes
7
Rating
0
P
PrintablesMartin Dugdale

Creality SparkX i7 Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, testing ironing flow (10–30%) and speed (10–30 mm/s) to help you…

Downloads
109
Likes
5
Rating
0
P
PrintablesLensrentals.com

DJI Lens Support for Ronin-S / SC

We were having trouble sourcing replacement lens support brackets for the DJI Ronin-S / DJI Ronin-SC , so we made some. DJI has started manufacturing their own using plastic anyway ; ) Enjoy! Print Settings Supports: No Resolution: 0.15…

Downloads
104
Likes
10
Rating
0
P
PrintablesTHOMAS

Red hood ronin armor

red hood armor

Downloads
102
Likes
17
Rating
0
P
Printablesspudsforbrains

Ironing board hook

Ironing board hook

Downloads
99
Likes
12
Rating
4.67
P
Printableslka

Ironing Board Foot / Bügelbrett Fuß

Foot for Ironing board fits 20x30mm pipes. Designed as replacement part for Kärcher Bügelbrett. print settings: Best printed on the large flat side. Depending on tolerances and the ironing board the fight mit bit really tight. Scaling it…

Downloads
99
Likes
7
Rating
5
P
PrintablesHologos

Wall Hanger for Ironing Board with curved legs

Wall hanger for an ironing board with curved legs. Use four 6mmx50mm half round head screws. Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 4 Top layers: 4 layers Bottom layers: 4 layers Infill: 25% Supports: no (if you…

Downloads
97
Likes
19
Rating
5
P
Printablesgeekdomo

Bias Tape Holder with Pin Holes for Ironing Boards - Cloth Mask Creation

This is a remix of one from https://www.thingiverse.com/thing:4232886 I was asked to make one with pinholes in it. Category: DIY

Downloads
95
Likes
23
Rating
5
P
PrintablesMiaou

RONIN 4D VLOCK ADAPTER

With this adapter printed, you need to buy the Vmount Battery Plate 2987 from Smallrig. This adapter is made by MIAOUPROD, a french movie production company. PLEASE TAG ON SOCIAL MEDIA

Downloads
92
Likes
5
Rating
0
P
PrintablesLCreator

Christmas Tree Gift Tag: May be scaled, ironing is optional

A Christmas tree tag that is simple to print and takes minimal filament Perfect for use on Gift bags, Presents, and more! We recommend using 70-100% infill at 110mm/min

Downloads
87
Likes
9
Rating
0
P
PrintablesDunc toB

FC Groningen Logo

I made this logo for my sons "Eredivisie football club logo collection". Made in Tinkercad from a picture of the logo. Print Instructions Print in 0.2mm layers, and change color every 4 layers.

Downloads
86
Likes
6
Rating
0
P
PrintablesMartin Dugdale

Creality K1 Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

Description: This ironing calibration test is designed specifically for the Creality K1 to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full…

Downloads
84
Likes
3
Rating
0
P
PrintablesPeter Ennist

Tengu Katana from 47 Ronin (2013)

My Process: I draw a 2D profile in NanoCAD (Free NanoCAD 5 non 3D capability). I export the file as a DXF and upload it to Fusion 360 (Free Version, still learning how to use) where I extrude add chamfers, fillets creating a 3D File.…

Downloads
84
Likes
12
Rating
0
P
PrintablesPenny_Dealer

Ironing testers

These are two blocs to test the "ironing" Settings on your 3d printer, each one has a little indicator on the side so you can easily tell wich one to set ironing on and wich one is wich afterwords.

Downloads
78
Likes
6
Rating
5
P
PrintablesMarco Ponzetti

Wall hanger for IKEA Ruter ironing board

If you bought a IKEA Ruter Ironing board you are probably wondering where the heck you should put it. I live in a small house, therefore floor space is gold, which prompted me to make this super simple wall hanger for the Ruter board. I…

Downloads
78
Likes
8
Rating
4
P
Printableslordubbe

Ironing Board Clip for IKEA DÄNKA

Replacement clip for the IKEA DÄNKA ironing board, as the original snapped. Designed and printed within 1 hour!

Downloads
74
Likes
6
Rating
5
P
PrintablesSica

DJI Ronin RSC 2 cold shoe

Dji Ronins come with left and right mounting points for handles, lights, mics, etc but no cold shoes. This part is the simplest print you can use to have a cold shoe on your Ronin.

Downloads
74
Likes
7
Rating
0
P
Printables3D Master

Ronin Samurai Kneeling Statue

Ronin Samurai Kneeling Statue

Downloads
72
Likes
9
Rating
0
P
PrintablesZthCreates

DJI Ronin SC2 Nato To Cold Shoe

Enhance your DJI Ronin SC2 setup with this precisely engineered STL adapter, crafted to seamlessly connect to the gimbal’s NATO mount. This versatile accessory is perfect for mounting an array of cold shoe-based gear, including compact…

Downloads
71
Likes
2
Rating
0
P
Printablesnasciiboy

Porta Placa MX TVS Ronin

Imprimir con un material resistente a la interperie como petg Se probo con boquilla 0.4 a altura de capa de .20, 5 paredes, relleno giroide conectado al 40%, .8 de grosor superior e inferior y soportes Variante del modelo para maquinar en…

Downloads
70
Likes
1
Rating
0
P
PrintablesKosut_Ondrej

DJI RONIN-SC riser plate for NATO RAIL

DJI Ronin-SC gimbal mounting point extension plate. Gimbal fastening with 2x M3 screws. NATO rail holds in one M5 screw which has a bold on this plate. And second point is 1 / 4-20 screw directly to original ronin-sc plate adapter for…

Downloads
69
Likes
8
Rating
0
P
PrintablesModel Magic

Drop Dead Fred - Elizabeth Cronin & Fred - 1991

Drop Dead Fred - Elizabeth Cronin (Phoebe Cates) & Fred (Rik Mayall) - 1991 3D printable model.

Downloads
68
Likes
16
Rating
5
P
PrintablesCraftswoman.cz

Holder for the rods on ironing board [Držák na nohy žehlícího prkna]

Holder for the rods on the ironing board. Link to the post .

Downloads
68
Likes
11
Rating
5
P
Printablesc3poSAW

Ironing board holder

EN: Just a simple Hook. I used it form my Ironing board. Space between Wall and inner wall of hook is 35mm DE: Nur ein einfacher Haken für mein Bügelbrett. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,22mm Infill:…

Downloads
66
Likes
6
Rating
5
P
PrintablesBiodium Bricks

Ninjago Zarkt's Roningasa

I recommend printing it with the smallest nozzle you have (I used 0.4mm) with support and to make it come out as nice as possible i printed it upside down (yes with the tassel on the build-plate) as it was easier to remove the supports…

Downloads
66
Likes
5
Rating
0
P
PrintablesDanteHM

Kage Ronin

Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…

Downloads
66
Likes
13
Rating
0
P
PrintablesXorxis

AquaPur Ironing Board Foot

Story: I bought a AquaPur ironing desk which occur to have plastic slippery foots on it, that would cause the board to bend quite bad during ironing. I got my first spool of TPU at that time so I decided to copy that foot and get my board…

Downloads
64
Likes
5
Rating
5

hook for ironing board

just for hang on a wall ;)

Downloads
61
Likes
7
Rating
0
P
PrintablesThe Rookie

Roblox hours Ronin drifters katana but for Easy13

Just the Roblox hours Ronin drifters katana for Easy13 just for fun :)

Downloads
61
Likes
13
Rating
0
P
PrintablesMartin Dugdale

Creality HI Combo Ironing Calibration Test (10–30% Flow / 10–30 mm/s) – Smooth Top Layer

Description: This ironing calibration test is designed to help you achieve clean, consistent top surfaces with minimal effort. The model uses 25 mm diameter circles at 1 mm thickness, covering a full matrix of ironing flow (10–30%) and…

Downloads
57
Likes
3
Rating
0
P
PrintablesMatt

foot for ironing board / Bügelbrett Fuß

A foot of my mothers ironing board wore up so I designed a new one. The size of the strut going in the foot is ca. 20mm x 30mm The angle to the floor is 55° F3D file is attached as well.

Downloads
55
Likes
3
Rating
0
P
PrintablesCederb

Counterweight for DJI Ronin RSC2

Uses standard M8x10mm screws as counterweights, I used the low profile variant that weighs in at around 7 grams each for a variable weight of 49 grams. The prints, two threaded M5 inserts, and two M5x25mm screws add another 31 grams for a…

Downloads
54
Likes
7
Rating
5