Chess rook
Simple chess rock If you're looking to support my work or obtain a commercial license, consider joining a Patreon membership. https://www.patreon.com/Stistko
- Downloads
- 514
- Likes
- 31
- Rating
- 5
872 models
Simple chess rock If you're looking to support my work or obtain a commercial license, consider joining a Patreon membership. https://www.patreon.com/Stistko
The Rook The tower and the playing field have recesses for magnets. This makes it easy to wrap the playing field around the tower. The tower has 3 levels to store the game pieces. Necessary parts Printed 8x Playing fields (16x half…
The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…
I didn't design this model, it was from the Elegoo Mars 2 Pro Mono 2K resin printer USB drive. I printed this in one of my review videos, you may download it if you want to test this model on your own printer. Category: Chess
LDO Rook Kit!! Welcome to the Rook MK1 3D Printer Page This is a small DIY beginner friendly CoreXY 3D Printer. Learn how to build a printer or learn about Klipper by taking on this project! Rook MK1.1 Update Rookery Toolhead is now…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Introducing the Chess Rook with a fascinating passthrough illusion! This model appears to defy the laws of physics as the "male" part of the thread passes through the slightly larger "female" part. This effect is not only visually…
A 1:12 and 1:48 scale Rookie ODST miniature! This miniature is part of a set of 12 available for purchase on my website or on my Patreon until August 2024. The full version includes swappable heads, pre-supports for resin printing, and 11…
Welcome to the Rook 2020 MK2 3D Printer Kanrog who is part of the Rolohaun Design helped created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook 2020 MK1 , the frame now uses blind joints,…
THIS IS AN OLD OUTDATED VERSION, NEW ONE HERE Welcome to the Rook 2020 MK1 3D Printer Kanrog who is part of the Rolohaun Design team created this printer! This is a small DIY beginner friendly CoreXY 3D Printer. This is based on the Rook…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 2025 FORMULA ROOKIE RACECAR is a large 1:10 scale display model inspired by modern day formula racecars. SIZE / WEIGHT: Total assembly: Roughly 47 x 18 cm Filament: I used…
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
This is a model of a detailed chess Rook. I have also models for the other Chess Pieces and Pawns
Sunglasses that you can 3D Print *(use a cut up paper clip for the hinge)
This is a tool head designed for an ender head with a volcano heat block. here is the BOM (1) 3010 fan (2) 3010 blowers or 4010 blowers (3) M3x6x5 heat inserts (2) M3x4x5 heat inserts for input shaper - Optional (2) M3x4x5 heat inserts…
This is my First design I have made completely from scratch. I have been a One Piece fan ever since i was in college and i always thought Brooks Cane sword was cool. As I'm Typing i just realized you could also use these files for Kisuke…
A chess rook. The files are 3mf. instead of the common STL. 3mf files are smaller and more accurate and still work with all slicers I've tried.
XY Size Compensation on the Inner Piece at -0.4 Smaller yet sturdier Fits on standard size chess board
I wanted to model a Rook for an upcoming project. This chess piece models some of the details on nicer wood pieces. I printed mine with a .6 nozzle. Scale to your desire. Cheers
DRAGONS AHEAD THIS IS A BETA 3D PRINTER! Welcome to the Rook MK2! This is a huge update to the Rook 3D Printer: Specs: Full 120 x120mm Build Area 4:1 Gear Reduction Z Cartesian Motion for simplicity Fully 3D printed Frame Easily…
As far as I know, nobody really knows where this model originally came from, but it's by far my favorite test print. You can also find it here on Thingiverse: https://www.thingiverse.com/thing:99028 I print one for every new filament I…
Single piece belt tie for rook tool head, tested by ZombieHedgehog
MK2 is out! Rook 2020 Scalable MK1 This is my mod for the Rook 2020 to make it fully scalable to any size. (within reason, there is a limit to what the 2020 extrusions can do..) This also adds a triple belted geared Z-axis To determine…
Very close copy of Oakley Holbrook right side arm
altura de capa 0,2mm color negro capas 1 a 14 color blanco capas 15 a 25
Rook 2020 Scalable MK2 This is my mod for the Rook 2020 to make it fully scalable to any size. (within reason, there is a limit to what the 2020 extrusions can do..) This also adds a triple belted geared Z-axis Here is a video on my MK1…
Leveling rooks designed specifically for the Kobra 3. These are complete remodels inspired by @FreshPrints "THE ROOK" on printables. https://www.printables.com/model/653220-the-rook-anycubic-kobra-2-kobra-2-pro-kobra-2-plus I have…
There are two versions of the top of the Rook one is for 150mm rails and one is for 200mm rails. Please note that the 150 covers the rods, so are not compatible with the 200mm.
Meet Trook - the triangular book holder. This one is for all the bookworms out there.
This is the Sentinel, a small, compact direct-drive printhead for the Rook 2020! Uses a Creality heatsink and heatbreak (recommend all-metal) and a CHC or CHC-Pro for a super compact hotend. I've added a version for the Trianglelabs CR10…
I created this 3d Lettering because i could not find any. Use this in combination with other models or modify it according to your needs. Have fun.
This is a mount for the rook MGN9C carriage This will require 2 M3 heat inserts in the holes
These parts adapt the [Dragon Burner](https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) to the [Rook MK1](https://www.printables.com/model/387431-rook-mk1-3d-printer). The parts were specifically designed for [Fabreeko's…
Mini Stealthburner variation I made for the Rook 2020. Toolhead mounting bracket mounts directly to the MGN9C carriage. Mounting bracket has integrated mounting for E3D v6 or other hotends that use the same style mounting. The fan ducts…
I modified the Rookery by Gulsifer to fit dual 4020 and 5015 blower fans instead of the original 3010 and 4010 verison. Theres mounting for a accelerometer on both, using M3 heatsets. (15mm holespacing) The 4020 version comes with some…
This is a 300mm remix of the Rook 2020 DIY 3d printer using a Ender 3 bed. This remix adds a 2020 extrusion supported bed and x carriage as well as end physical end stop mounts for all axis's. This also adds a mount for a cheap 3.5 inch…
Vase model for the Spiral Vase mode, because of that the top and bottom are closed. Printed on Prusa MK3S with Esun PLA+ Dimensions: 87x87x200 mm Can be scaled accordingly. Thank you!
Added space for M3 nuts and bolts to help with installing the bearings on your bed. V2 has space for the bed-adjustement nuts in the bed, freeing up more space. Included some simple adjustement-wheels. Like my work? Support me on Ko-fi!
Removed double helix for easier printing and cut the top to see the stairs better
This will not me updated. The Rook 2020 Scalable and the Ender NG project has made this obsolete. This is my mod for the Rook 2020 to make it use all the parts from an Ender 3 V2. This needs an aditional z-motor and leadscrew Uses most of…
Designed for windspeeds from 5 to 25 [m/s] Windspeed [m/s] 5 11.67 18.33 25 Pitch [deg] 0 -8.0 6.17 18.31 Thrust [N] -0.75e6 -0.17e7 -0.94e6 -0.75e6 P Shaft [W] 1.55e6 15.72e6 15.71e6 15.71e6 P Elect [W] 1.53e6 15.01e6 15e6 15e6 RPM 5.017…
Mount your SKR Pico & Pi Zero to your frame the proper way. Made one version for heat-inserts, and one that just screws into the plastic. Thnaks to conscriptedtraveler on the discord for the picture and testing! Like my work? Support me…
A whimsical little witch’s home with a curling shingle roof, tall bent chimney, and a gnarled tree hugging the stone walls. A round door and arched windows peek from the eaves, while a plump cauldron sits by the steps on a cobblestone…
I designed this because I wanted a container to fit chess-figures into. And to keep the theme rolling I decided to make it a rook with a top part that can be screwed on and off. The top parts does not need supports if your printer is able…
This is a small 100mm statue of dwayne the rook
BETA, testing is being done. Added an optional bedframe with 2x 200mm 2020 extrusions. This is a modified version of the Rook 2020 MK2 that uses a KP3S bed and 3 Z-motors along with a slightly larger frame. Frame is all 250mm extrusions,…
Thes feet are for the Rook MK1 and you don't need to support them as long as you print them on the flat angled surface.
This is a mount for a V6 body for the rookery. You need to use the rookery long 4020 for it.
Mini Stealth Burner E3D v6 Bowden - Rook I extracted the Files From The 3 D Model Step File So I Could Print Them to Use, In ABS Enjoy
Do you need a replacement rook for your chess set? Do you want to 3D print an entire chess set? This is a basic rook chess piece. This rook has a hole on the bottom for a weight that is 15 mm in diameter and 8 mm deep. Print Instructions…
Originally remixed from Gulsifer ' s mount, now redesigned from scratch. Simple adapter mainly designed to make direct drive setups as fast as possible. Nozzle position is 8.83mm lower comparing to rookery, keep that in mind. Changelog:…
This is not from me. I discovered that this model had a smaller and different base than the other bases of the Egyptian chess set. I took the base of another piece and blend it with this model I also had to play with the size of this…
Designed for Bambu Lab AMS (4-color setup) Grey → Buildings Black → Roads Green → Parks Blue → Water No supports needed , flat base for easy adhesion Perfect for wall art, desk décor, or gifts Fits the Bambu Lab A1 / P1 build plate ⚙…
A simple mount for the creality-style endstops for your Rook! uses M3 heated inserts for the screws, mounts to the frame with the stock M5 holes for the legs. Can be used on all 4 corners. Like my work? Support me on Ko-fi!
This highly detailed 3D model represents Brook, the iconic skeleton musician from One Piece, captured in a dynamic rockstar pose. The figure stands confidently with legs apart, playing an electric guitar adorned with skull motifs that…
Made a side-mount for a spool and the extruder. Spool-mount uses the 8mm rod and one M5 screw, extruder uses one of the M3 screws from the rail and a nut and one screw you need get creative with. Can be mirrored in the slicer for left…
This is a skull of a miniature chameleon from CT scan data. It prints well with breakaway support.
Mod/extension for the Rook 180 by Rolohaun , based on the idea of Kanrog , who had the brilliant idea to extend the size of the Rook180 ( Rook-235 & 225 Mod ), now you can also extend the Rook 180 TURNED (mod by WoodKnight). The Rook 180…
They aren't the most detailed but they were just ones I designed in an afternoon for my girlfriend and i to cosplay at comic con
Simple extruder mount for the rook, mounts to the M3 holes on either the top or bottom frame, can be mirrored in slicer if needed. Like my work? Support me on Ko-fi!
This complete chess set ♚ ♛ ♜ ♝ ♞ ♟ reimagines the pieces around 3D-printer nozzles and filament spools. Both MK8 and V6 nozzle designs appear across the ranks, while the knight head features distinctive half hexagonal shapes.…
Modified build plate texture of the Rook 3D-Printer for Orca slicer (maybe also suitable for other slicers) A wide variety of views of the print frames are available. Also several textures in different colours. Everything can be combined…
Special thanks to Gulsifer and ZombieHedgehog for the design, ideation, and testing that went on to create these supplemental files. Big thanks to Rolohaun for the original printer design and Kanrog for the original Barracks design we…
A simple low-profile endstop mount for your Rook. helps getting all the volume you can get. PLEASE NOTE! This does not work with the 3 piece bed! Like my work? Support me on Ko-fi!
Finish off your Rook in style with the Shield, side and backpanels to secure your Rook for the ultimate frame stiffness. Fully compatible with most of my mods, has the mounting holes for a 120mm part-cooling fan and an included fanduct.…
more doors on the rook, can see the double helix better. Category: Sculptures
This is a tolerance test. It is meant to test if the gates can open and overhang up to 60. Pop the Gates and get inside. Use a small screwdriver at the base of the gates and pry them open.
"Preparing scavenger protocol... R O O K O N L I N E" A ROOK frame is a scavenger's best friend. These base robotic frames are typically utilized by the UESC and various corporations for manual and heavy labor. RUNNERS have taken to…
I created this chess rook (or simple tower) for holding the kitchen door open during venting across multiple rooms. Then sometimes the draught closes the door. I created a 5cm and a 10cm version. Each uses one 10x10x10 magnet. You need to…
Description I designed these sunglasses a few years ago after my sunglasses (Okley Holbrook) broke while mountain biking. The goal was to reuse the lenses and have an affordable frame that could be easily and cheaply replaced if damaged.…
This is a HOn30 5 ton BFA Brookville gas locomotive. It is designed to use a Toma Model Works power chassis #6151 with a 12mm wheelbase and 6mm wheels. This is the chassis used:…
tired of stinging your finger? say no more with the hook protectorr
This is the top components of the rook only and it allows you to use rods instead of rails for your rook.
***Please be aware that I did this mod on my Rook 2020 that is using 250mm for the Z Extrusions and Rods. My build volume is 120mm(x), 120mm(y), and 155mm(z). I'm not sure how it affects the Z if the mod is applied on a stock Rook 2020.…
I wanted to see if i could extend the Rook to fit an Ender3 bed. The Z rods can be kept stock, or use longer ones for a higher Z. With 450mm rods on Z, the z volume is 280mm X and Y uses 8x360mm rods. Note: If you have the Rook 180 TURNED…
This is a Lid for the Rook MK1 base so that it stuff does not fall onto your electronics. There are two modules, one that is chamfered and one that is not. Note this is a raised logo so you can do a color change and get the logo to stand…
Simple frame to hold a 120x120 glass bed. it has holes for 3x M4 hex-nuts for adjustement. I went to a local picture-framing-shop and got a 120x120 piece of glass for free and used double sided tape to hold it to the frame. EDIT: Make a…
Although the Pocket Auto Catch comes with a wrist strap, I didn't quite like it, and a friend of mine had his break, so I decided to CAD up a model that could be put on a carabiner or other keyring holder so that I wouldn't need to wear…
This design allows an x1c hotend (or its clone) to be installed on the Rook MK1 with the original Rookery cradle. Considering how affordable and well the official Bambu Lab hotend is, it is a great hotend option for the Rook. Parts for…
Protect your components with Bricks! These skirts are a great addition to your Rook! Only work with the newly updated MK1.1 feet! 3 versions currently, stock, 30mm fan and 40mm fan. 2 zip-tie anchors for cable managing You need 1 adapter…
Update 02/2023 Added another base modell so you can use heat-set inserts M3 I made this thing for a friends pad project. It's made for a Brook Universal Fighting Board (UFB) and contains a mount (base) as well as a cover if needed. The…
These tools are designed to help in assembling the Rook 3D printer by @rolohaun . The bearings need to have shims on the outside and they are small and difficult for me to position. The fork can hold a shim in place while tightening the…
This mod will add a 2020 aluminum extrusion to your Y carriage. This allows you to mount your rail onto the extrusion and will give additional support to your Y carriage. Needed Hardware 1 150mm 2020 Aluminum Extrusion (for normal size…
Protect your electronics! This fits the stock MK1.1 and is compatible with my Bricks Skirts! You can do multiple colors by doing a filament swap. Like my work? Support me on Ko-fi!
Additional strength with double shear on the motor mounts. My personal MK2 is getting kind of crazy and I need more strength, so I'm going to try this out. You'll need: (other than stock hardware) - Slightly longer belts (12mm longer) -…
This is not from me. It is an alternative Rook chess piece for the Egypt set that I found out on internet. This model was missing from here. Category: DIY
2x2 Lego compatible stand. Good for smaller models. 50mm to the top flat of the ‘brick’ interface.
This is a figure of the Rook from Marathon. best printed in multiple colours. I've also attached a 3MF file. Enjoy!
The Brooklyn Bridge Bookend is perfect for any civil engineer or bridge enthusiast looking for something to spruce up their shelves! This model comes in 3 parts and various quantities: Bridge Anchorage x 1 Bridge Tower x 1 Bridge Cables x…
V2 Update, Supports Rook 2020 MK1. Easier Printing, no supports! Aluminum/carbon fiber gantry mod. Uses Stock Hardware + Standard 200 x 200 frame = 150mm 2020 Extrusion {Your Frame X Dimension} - 50mm Shorter = Extrusion length x6 M5 X 8…
Remixed the Dragon burner to carry the Rook logo and remixed the Rapido HF mount to fit the TD6S. Dragonburner Mount it self is made by Gulsier. Dragon Burner Mount MGN9C for the Rook by Gulsifer | Download free STL model | Printables.com…
Our Rook chess piece got lost so i designed this new one and uploaded here in case anyone else got their rook lost.
A simple mount for most Nema17 based bowden extruders. Realisitcly you only need to use one of the 2 M5 screw mounts to keep it secure. Like my work? Support me on Ko-fi!
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
This is a simple remix to add a RPI Zero mount to Kanrog's SKR Mini E3 Rook MK1 mount.
Rook 2020 Z motor mount for 4:1 gear ratio. UPDATE: 6/1/23 V4 Fixes Easier belt installation Removed motor mount screw Needs Rook BOM rubber feet or - Rook Feet options - Below - Belt Clip For easy tension - Zip tie around for security.…