Search results: rot

Sort order

17,134 models

P
Printablesjan

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
16,669
Likes
4,370
Rating
4.68
P
PrintablesOčko

Core One/+/L _ _ _ Z axis Dust Protector

24.12.2025 Update. I printed another part with a different profile setting at 8 perimeter and the print time was reduced by 1 minute. simple printing in 12 minutes print 0,2 mm structural Print PetG full bottom layers 6 print 3* left and…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15,518
Likes
1,635
Rating
4.95
P
PrintablesCUBE3DWORLD

Mega Extruder Rotation Visualizer Bundle

Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
8,420
Likes
2,458
Rating
4.84
P
PrintablesMikolas Zuza

Extruder rotation vizualizer

Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
6,426
Likes
1,162
Rating
4.95
P
PrintablesPetclaud

NEMA (extruder) motor rotation indicator

I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
4,713
Likes
606
Rating
4.85
P
PrintablesBUDS3D

BEER/POP CAN OPENER/PROTECTOR/BUG FREE TOP

Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…

Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant

Downloads
4,478
Likes
604
Rating
4.87
P
PrintablesAMTprojects

Vernier bevel protractor - Goniometer | Rapporteur | Winkelmesser

What it is A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm). What to print There are three parts awaiting you, which can be printed…

Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,794
Likes
1,273
Rating
4.87
P
Printablesastrophage

Spiral Tube Cable Protector

This was inspired by one I saw at my parents. Why pay $0.25 for one ($6 for a 24 pack), when I can design and print one for much more? This can print without supports using PLA. I haven't tried using TPU, but that might work even better.…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
2,034
Likes
263
Rating
4.88
P
Printablessbuerger

Dust Protector for Prusa Mk4 and Mk3 Z-Motors

*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,963
Likes
542
Rating
4.68
P
PrintablesRC_3DWorks

Universal wall mount - rotatable - V3

The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
1,847
Likes
1,095
Rating
5
P
Printableshorrovac

Chain Lube Overspray Protector

Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant

Downloads
1,716
Likes
936
Rating
5
P
PrintablesLuigisvc

smartphone USB cable type C and A Protector cover

printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant

Downloads
1,339
Likes
86
Rating
5
P
PrintablesLuigisvc

Iphone Lightning Cable protector

This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
1,177
Likes
92
Rating
4.88
P
PrintablesMajed

iPhone Charge Cable Protector

A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
1,148
Likes
212
Rating
4.76
P
PrintablesOttefant

x-axis cable protector

This print protects the x-axis cable from being bend while working. To assemble you just need one of the cable ties that came along with the printer. Print instructions Just print with the flat site downwards in 0,10mm up to 0,2mm with…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,059
Likes
150
Rating
4.93
P
PrintablesIan Rich

Prusa Extruder Rotation Visualizer Turbine

All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,049
Likes
96
Rating
4.78
P
PrintablesPeter Farell

Andor Tie Avenger Prototype : Andor 2 : Star Wars

Andor Tie Avenger Prototype : Andor 2 : Star Wars Please consider finding a better orientation for printing. And if you do find one Share.

Print approx. €11.19–€13.67 excl. taxPreliminary estimate for one variant

Downloads
1,048
Likes
358
Rating
0
P
PrintablesNem

SD card case/protector w/ label (remix/OpenSCAD)

I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
899
Likes
228
Rating
4.89
P
PrintablesSilfer

Arduino Uno Prototyping Base

Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
862
Likes
185
Rating
5
P
PrintablesKLM

Minimalistic Extruder Rotation indicator

This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
832
Likes
87
Rating
4.78
P
PrintablesRapidSpatz

Bosch KIOX Protector / Bumper Case

My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
827
Likes
85
Rating
5
P
PrintablesZeyko

Brother Bear Totem

Original totem from the movie Brother Bear

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
788
Likes
94
Rating
5
P
Printablesredvsgreen

KTM EXC/EXC-F Rear Shock Protector

Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…

Print approx. €11.84–€14.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
767
Likes
66
Rating
5
P
Printableseveve05

Radial/rotary engine toy (print in place)

This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant

Downloads
746
Likes
151
Rating
4.75
P
PrintablesPeter Farell

Brain Rot Shark : Tralalero Tralala

Brain Rot Shark : Tralalero Tralala

Print approx. €7.56–€9.23 excl. taxPreliminary estimate for one variant

Downloads
705
Likes
70
Rating
5
P
PrintablesKlaus

Bodenschoner für Biertisch / Festzeltgarnitur (floor protectors for folding table)

Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
700
Likes
39
Rating
5
P
Printables_cybermouse_

Gridfinity Rotary Tool Bits and Pieces Storage

I designed this simple storage unit for my rotary tool bits based on the Gridfinity system by Zack Freedman.

Print approx. €9.71–€11.87 excl. taxPreliminary estimate for one variant

Downloads
693
Likes
162
Rating
5
P
PrintablesCst 102413

Protogen Key chain furry fursuit multicolor

Hi guys <(^^ )> ---------------------------------------------------------------------------------------------------------------- Vous aurez besoin de 4 couleur. L'AMS n'est pas nécessaire pour cette impression. 18 min d'impression. I love…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
667
Likes
98
Rating
5
P
PrintablesMartin

1 & 2 Nikon EN-EL15 Battery Protection Case

1 & 2 Nikon EN-EL15 Battery Protection Case

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
661
Likes
57
Rating
5
P
PrintablesSlacker

Unifi Protect G3 Instant Mount

Mounting base model for Unifi Protect G3 Instant camera. Can be added to your custom mount to give you a single piece solution to meet your needs. Print instructions Category: Camera Summary Mounting base model for Unifi Protect G3…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
654
Likes
67
Rating
5
P
PrintablesSTSUL.CZ
18+

The source marked this model as adult content.

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
624
Likes
369
Rating
4.5
P
PrintablesCraig Heath

Replica Enigma Machine Rotor

WARNING: This is a CHALLENGING project. You will need a well-calibrated 3D printer, and the patience to handle a lot of very fiddly small screws. This replica model is based on accurate blueprints and measurements from an actual World War…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
624
Likes
76
Rating
5
P
PrintablesDrakein3D

Professional Mobile UX UI Prototyping Stencil

By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant

Downloads
556
Likes
223
Rating
5
P

Rotation key for Monsieur Cuisine knife (LIDL Thermomix)

Printed with PETG but PLA should work aswell.

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
533
Likes
50
Rating
5
P
PrintablesKubiV

Radiomaster BOXER Gimbal Protection

Protection For Radiomaster BOXER Controller Gimbals

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
531
Likes
33
Rating
5
P
PrintablesAllpa

Edge protector for 1" lashing straps / Kantenschutz für 25 mm Spanngurte

Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
520
Likes
47
Rating
5
P
Printables3D KIMBA

NPT Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

NPT Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for BSPP Pipe Plugs? You can find them HERE! Product Description: These NPT pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant

Downloads
482
Likes
141
Rating
5
P
PrintablesFerret

JST-XH Connector Protector Case (2-9pin) Kit

Protector Case Kit for JST-XH Connectors (2-9 Pin) Keep your JST-XH connectors secure with this Protector Case Kit, designed for 2-9 pin connectors. This kit provides durable protective covers that help improve cable management while also…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
476
Likes
143
Rating
4
P
PrintablesESPBoards

Rotary Encoder KY-040 (EC11) Housing with Snap-fit and Screw Mount

Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
474
Likes
37
Rating
4.5
P
PrintablesDvG3DAtelier

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
471
Likes
170
Rating
5
P
PrintablesMario M

Manfrotto tripods quick release plate

If you own several cameras you don't want the hassle of mounting your plate any time you change cameras. Print as many as you need! This plate also works great with my phone frame. Use two M4 bolts to attach it. You will have a phone with…

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
453
Likes
65
Rating
5
P
Printablesmrusk

Desktop Twin Engine Throttle for Flight Simulation

This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
445
Likes
93
Rating
5
P
PrintablesThird Dimension

Sculpted model of a parrot singlecolor or multicolor

Sculpted model of a parrot. Available in single color or multicolor print with colorchanges. All my models are free to download and remix. If you appreciate them, please leave a download and a like!

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
433
Likes
50
Rating
4.75
P
PrintablesThe Alchemist

protractor

dial on the protractor has windows to line up the correct angle and slots for marking (see photo). dial has a pointed end and a open end to line up a large pencils. version 2 only changed the size of the numbers and spacing there are now…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
412
Likes
29
Rating
5
P
Printablesrooihond

Xiegu G90 Protective Side Rails

Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
407
Likes
31
Rating
5
P
Printablestesla3dlabs

#RESISTANCECOVID RC4 - Prusa Protective Face Shield - RC1 RC2 RC3 RC3.1 - easy shield FIXATION & ROTATION

REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
401
Likes
0
Rating
4
P
PrintablesREMLURELMI

9V Battery Terminal Protector

Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
106
Rating
5
P
PrintablesKerndrup

Centrotec holder with fastfix and bayonet lock

Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
386
Likes
73
Rating
5
P
PrintablesRo3Deee

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
380
Likes
53
Rating
4.75
P
PrintablesMe

Protective storage case for 18650 battery

I designed this experimental case to protect my 18650 batteries from short circuits in storage. The two halves screw together, creating a cover that protects the battery. I printed it with Elegoo pla, using variable layer height (0.3mm,…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant

Downloads
380
Likes
41
Rating
5
P

AB Clip. Universal JST-XH Connector Protector

Universal AB Clip version, remixed from kekerino 's project These are the .stl files for half of a clip of either the 2S, 3S, 4S, 5S, 6S, 7S, or 8S size clips. Both halves of a full clip are the same, and they just snap together on either…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
376
Likes
52
Rating
3.5
P
PrintablesKeepy

Mikrotik hAP lite TC wall mount

A simple wall mount for mikrotik hAP lites.

Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant

Downloads
369
Likes
27
Rating
5
P
PrintablesStefan Huber

Stand for Gravity Flow Columns used in Protein Purification

Stand to hold 4 x Gravity Flow Columns (17 mm ⌀) used in Protein Purification. The clamp grabs the column strong enough to be secure, but weak enough to adjust the height to elute into large 50 mL Falcon tubes or small 1.5 mL Eppis.…

Print approx. €9.00–€11.01 excl. taxPreliminary estimate for one variant

Downloads
361
Likes
31
Rating
5
P
PrintablesQuams

YARI - Yet Another Rotation Indicator

Heavily inspired by all the different rotation indicators flying around. Very thin and lean version. I primarily did this to have something fitting to the magnets that are flying around in the office and to test the variants feature of my…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
353
Likes
21
Rating
4.89
P
PrintablesEmpiricus

Mavic Pro Lens Shade and Gimbal Protector

A sturdy shade and a gimbal protector for the Mavic Pro. Couldn't find one that fits well and I kept loosing them in high wind. After inserting the hooks in the front, push with both thumbs from the back forward and down to lock in place.…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
21
Rating
5
P
PrintablesNDS RnD

Camera Protector for iPhone 13 Mini

The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
344
Likes
24
Rating
5
P
PrintablesUNIT3D

Extruder Rotation Visualizer Radioactive

Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
334
Likes
38
Rating
5
P
Printableskaidoestech

Propeller protector for Drone Pro/E88/E99/E58 - Nubs removed

A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
331
Likes
29
Rating
5
P
Printablescochrac

Rottweiler keychain

Two colored keychain for rottweiler lovers

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant

Downloads
328
Likes
24
Rating
5
P
Printablesc-arts-modelle

Zlin Agroturbo RC plane (1100 mm wingspan)

Zlin Agroturbo 1100 Version 1.0 (12.11.2023) Wingspan: ca. 1100 mm Body length: ca. 750 mm Take-off weight: ca. 550 - 650 g Motor: Brushless Motor 28mm Durchmesser (2200kV) ESC: 30A brushless-ESC Propeller: 7*5 ‘’ Battery: 3s Lipo 800 -…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
322
Likes
51
Rating
0
P
PrintablesCst 102413

Protogen Key Chain, Multicolore, furry

You didn't need a AMS for this impression <(^^ )> In the picture I painted it with black paint because my printer is unable to change the wire while printing <(-_- )> Thank you and Good Luck !!!

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
314
Likes
48
Rating
5
P
PrintablesCUBE3DWORLD

Extruder Rotation Visualizer Collection

How-To Print: Recommended layer height: 0.10 mm Color Change (Please see the tutorial below) Support: No needed Let the Visualizer cool down slowly on the printing plate to avoid being bent. How-To Change Filament Color: Montage: Just…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
62
Rating
4.67
P
PrintablesFlo

Protective jaws / soft jaw for vice (parametric in FreeCAD) prism for HEUER FRONT 140 and others

The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.

Print approx. €4.99–€6.10 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
43
Rating
5
P

Funny dinosaur brothers

Funny dinosaur brothers. Guys, don't print just yet! I found problems and will fix them. I will release a corrected version later. Thanks for understanding!

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
57
Rating
5
P
Printablesthe_buff

Rotary Stage: Updated

UPDATE: 3/1/2024 - ver. 1.1 I added additional pictures and explanation, below, to try and clarify the assembly process. UPDATE: 5/12/2023 - ver. 1.1 I have added a worm and worm gear set for finer rotation control. The FINE version of…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
297
Likes
33
Rating
4.5
P
Printables3D KIMBA

BSPP Pipe Plugs & Testers: Essential Protection for Pipes During Maintenance

BSPP Pipe Plugs: Essential Protection for Pipes During Maintenance Looking for NPT Pipe Plugs? You can find them HERE! Product Description: These BSPP pipe plugs offer a simple yet crucial solution for protecting hydraulic and pneumatic…

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
283
Likes
93
Rating
5
P
Printablesh0lesp

Thrustmaster T.Flight Hotas One - Throttle fix

Replace the original “house” with this one, and you will eliminate the 50% throttle stop as well as increasing the throttle friction. The friction is increased by having a more compressed spring due to the “shorter” inside. The 50% stop…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
283
Likes
41
Rating
5
P
PrintablesBorderbox

Spinning Beach Ball - Motor Rotation Indicator

What better way to indicate a busy printer than the spinning beach ball. Since the blades are modular and snaps together, you can mix and match colors to create your own custom spinner. You don't even have to use all six blades, use two…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
281
Likes
31
Rating
5
P
PrintablesTmpx64

MacBook Charger Cable Protector / sheath / spiral / sleeve

Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
46
Rating
4.5
P
Printablesalexmoras

Protectli FW4B Server 1U Mount for 19-inch and 10-inch Racks

Summary This is a rack-mount cage system for the Protectli FW4B mini-PC (a popular OPNsense / pfSense router for home-labbers). It is designed to fit either a standard 19-inch server rack or 10-inch mini-rack and take up 1U of rack-space.…

Print approx. €8.18–€10.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
267
Likes
27
Rating
5
P
Printableslecter

Silly Walks - Extruder rotation visualizer

This is an Extruder Visualizer based on the epic John Cleese character from the Ministry of Silly Walks sketch by Monty Python. Check out https://www.prusaprinters.org/visualize-extruder-motor-movements/ for more info on how to use it. I…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
263
Likes
58
Rating
4.83
P
PrintablesDatkannjan

Socket protection Germany / Steckdosenschutz

The most pluck-in holes are not deep enought for easy removal of socket protectors. This one has a deep of 12mm. The part has a total height of 16mm

Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant

Downloads
260
Likes
30
Rating
4.8
P
Printablesrockytoptim

Filament Sensor Holder with two screws to stop rotation with Bondetch extruder

So i remixed a version fo the filament sensor holder by Štěpík. I modified because I have bondtech extruder and orginal one wouldn't fit on the bondtech. Also I made extension and added second screw so that the filament sensor would't…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
62
Rating
4.75
P
PrintablesJacques Lopez

Nothing Phone (3a Pro) Ring Protective Case

This mini protective case is specifically designed for the Nothing Phone (3a Pro) . It provides targeted protection for the camera module without compromising the phone’s unique design. Features: ✔ Discreet design or not that perfectly…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
20
Rating
5
P
PrintablesAllpa

Protection Cap for Milwaukee Rail (red) / Schutzkappe für Milwaukee Führungsschiene (Rot)

A simple cover to protect the new, red Milwaukee guide rail. This is simply pushed onto the rail on the right and left and clamps by itself. It reliably prevents damage to the ends. Best printed with TPU, ASA or PETG. No supports…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
50
Rating
0
P
PrintablesBjoern101

paard-trotting-horse-without-socket

sliced with dynamic layer hight and with maximum detail

Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant

Downloads
243
Likes
27
Rating
0
P
PrintablesDanDi

Crank protector for shimano M8100 and SLX675

Crank protector for shimano M8100 and SLX675

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
22
Rating
5
P

Rotating Dishwasher Clean/Dirty/Washing Magnetic Sign

Dishwashers nowadays are usually so quiet that people don’t realize it is running. Plus my appliance is so well designed that no buttons, lights or indicators are visible when it is closed. Family members may open the dishwasher by…

Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant

Downloads
237
Likes
33
Rating
5
P
PrintablesAlex

Deburring Tool Protector Cap - NB1100

I recently bought a deburring tool and it looks super dangerous to have an open blade like that, so I designed and printed a protector cap to safely store it!

Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant

Downloads
232
Likes
55
Rating
5
P
Printablesxxorza

Mavic remote stick protector (air 2, mini 2)

Remote controller stick protector for Mavic Mini 2, Mavic Air 2 Print instructions On image it is printed with TPU

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
219
Likes
26
Rating
4
P
PrintablesMiniWorld3D

Mendizorrotza Stadium - Deportivo Alavés - Spain

🇪🇸⚽ 🏟 Welcome to northern Spain! 🔵⚪ Mendizorrotza or Mendizorroza is a football stadium in Vitoria-Gasteiz, Álava, in the autonomous community of the Basque Country. Opened on 27 April 1924, it is the home ground of Deportivo Alavés, a…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
218
Likes
38
Rating
0
P
PrintablesAryser

Rotating Ellipses Toy (golden ratio)

Rotating Ellipse Toy as fidget. 75mm length. Length to wide in golden ratio. Model is with small gaps. you will need a good printer. elements might stick slightly together, you might have to deblock. Versions Rotating long axe Rotating…

Print approx. €1.71–€2.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
67
Rating
4.5
P
Printablesczrtst

18650 / 18700 Protected Cell - Dual Battery Holder / Tray

This dual battery holder fits perfect with longer 18650 / 18700 cells. I made some changes from the Thingiverse version (thanks to Shadow8286 )because the original could not hold my 70mm long cells not very good and it was hard to…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
16
Rating
0
P
Printablessonof91

Lotti Karotti Spielfigurenhalterung + Deck

Lotti Karotti von Ravensburger Halterung für die Spielfiguren + Kartenkisten

Print approx. €4.72–€5.77 excl. taxPreliminary estimate for one variant

Downloads
200
Likes
19
Rating
5
P
PrintablesBaloo 3D

Gray Brother (Wolf pup) Scout woggle neckerchief scarfring - Canuto o pasa pañuelo de lobato

Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
18
Rating
0
P
PrintablesThunderTronH123

Digitrax Throttle Holder (DT600, DT500, UT4)

Based on jtpeyton Digitrax Throttle Dimensions. I needed to change the bottom to allow access to the Loconet Cable port (because I use a tethered system), and the lanyard attachment to fit in the holder for the Digitrax DT600 throttle. It…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
10
Rating
5
P
PrintablesZachy

Prusa Protective Face Shield - RC3.2 Dentmedia bandage free version

It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…

Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
187
Likes
1
Rating
0
P
PrintablesRobertusMaximus

Combat Carrier Prototype 99A

Combat Carrier Prototype 99A as inspired by my novel “Mongruxx - Until we cross this bridge again" Book 4. A semi-sentient broken down combat bot, Weaponeer 259 builds. His cavalcade included seven of these vehicles. In the dark,…

Print approx. €4.69–€5.74 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
52
Rating
5
P

Two way adapter FESTOOL/PROTOOL - Y adapter

I made this model for FESTOOL/PROTOOL vacuum cleaner. I needed vacuum in hand and roof vaccuming in the same time. Diameter 58mm First end put to vacuum cleaner. Other TWO ways need easy assamble adapters for hoses => two hollow…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
182
Likes
31
Rating
5

M-O bedscrapper prototype

Based on Wall-e companion M-O scrap your bed with style. Supports required Shaft is 3.4mm vertex to vertex, so you can create your own adjusting tolerances if needed. Enjoy it as much as i did designing it and STAY CLEAN!

Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant

Downloads
177
Likes
199
Rating
0
P
PrintablesAlex_P

Knob for rotary encoder or potentiometer

Knob for rotary encoder or potentiometer with 6mm shaft.

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
175
Likes
13
Rating
0
P
PrintablesMaaarsl

Vise Protective Jaws (Schraubstock-Schutzbacken)

I needed a pair of vise protective jaws to clamp sensitive materials securely without scratching or denting them. The notches make it possible to clamp round or oval workpieces and prevent them from slipping off in any direction. Due to…

Print approx. €6.29–€7.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
16
Rating
0
P
PrintablesSimon Niessalla

Gridfinity Bosch GRO 12V-35 rotation tool module

Leave a make if u found it to be useful or write a comment for feedback, thank you! Did mine in PLA, 0.6 nozzle, 5% gyroid infill. Cut in half to fit on smaller bed sizes. Happy printing!

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant

Downloads
163
Likes
21
Rating
4.67
P
Printablesrin_ofumi

LCD Knobs with rotation indicator

* This is a design for the contest. This is a multi-color design for MK3S/S+ with MMU. For the single model without MMU, please print only the A part of the outer shape. This LCD cover model has customized characters. Update 2023.12.3:…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
157
Likes
75
Rating
4.8
P
Printablesserialx

iOS Settings Extruder Rotation Visualizer

This is an extruder rotation visualizer in the theme of iOS settings icon for NEMA 17 motors on the Original Prusa i3. This is a remix of Extruder Visualizer from GerryPB . Video Clip Remix Changes Made the printing and assembly more…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
66
Rating
4.63
P
PrintablesPeter Farell

Dead Parrot From Flying Circus

Dead Parrot and Cage adaption from Monty Python and Flying Circus. Took some artistic license with the cage.

Print approx. €22.02–€26.92 excl. taxPreliminary estimate for one variant

Downloads
154
Likes
32
Rating
0
P
PrintablesRainer

Nema rotation Indicator z axis Prusa Mini

Josef Prusa's tattoo as an indicator of the Z axis for the Original Prusa Mini Print instructions The print is black on both sides, so start with black when printing the Gcode printed. I used Prusament black / orange. Print settings Layer…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
153
Likes
46
Rating
5
P
Printableskyleireland

Jumper T20S RDC90 Gimbal Protector

Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
8
Rating
5
P
PrintablesGeekMomProjects

Rotating Bead Bracelet (work in progress)

The cuff bracelet was intended to be printed with Matterhackers Quantum iridescent filament, which displays different colors on different sides of the print. That allows the rotating beads different colors in different orientations. It…

Print approx. €3.85–€4.71 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
42
Rating
4
P
PrintablesVinc01

Remote control protection box for "Verisure"

Which “Verisure” alarm remote control user has not made a mistake with their remote control? the original box having buttons that are too flush with the box, it often happens that when storing the remote control in a bag, for example, a…

Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
5
Rating
0